• Journal of Veterinary Clinics
• /
• v.29 no.2
• /
• pp.160-164
• /
• 2012

The goat industry has been developing for many years in Korea to meet demands for food and medicine. However, many complicated patterns of disease have arisen in goat farms as this industry has developed. In this study, disease occurrence patterns in Korean black goats were surveyed in six professional farming households in Imsil and Soonchang in the Jeonbuk province and in Hamyang and Sachon in the Gyeongnam province to understand and extend the goat disease database. We observed morbidity rates between 2.0% and 9.8% for adult goats and between 2.9% and 68.3% for kids. Kids showed a markedly higher incidence of disease when compared to adults. The rate of disease occurrence was 40.0% for floppy kid syndrome (FKS), 37.7% for diarrhea, 16.0% for respiratory disease, and 1.9% for skin disease. The observed mortality rates were 0.7% ~ 10.0%, and 2.2% ~ 24.9% for adult goats and kids, respectively. In addition, FKS, diarrhea, and respiratory disease were observed in 38.3%, 28.9%, and 10.0%, respectively, of dead goats. In conclusion, the majority of diseases in goats occur during the neonatal period, and FKS is the highest single cause of mortality in Korean black goats. Thus careful attention must be paid to kids to reduce the goat mortality rate.

• Journal of Conservation Science
• /
• v.30 no.3
• /
• pp.263-275
• /
• 2014

It's shown how to proceed the study on Manufacturing techniques & Conservation to the Iron Pot from Cheonmachong Ancient Tomb(the 155th Tomb in Hwangnam-dong). In order to investigate manufacturing techniques of the Iron Pot, some parts of the relic were gathered. After mounting, polishing and etching on the relic, analyzing the metal microstructure was conducted. Also it's conducted a SEM-EDS analysis on the nonmetallic inclusion. White iron structure was observed in the metallurgical structure inspection, SEM-EDS analysis. It seems to be dried slowly at room temperature after casting, doesn't look as particular heat treatment to improve brittleness. It is estimated that it's as the handle seam side were verified about 3cm inch wide, 1.5 thick in center of body, so 2 separate half-completed products was cast with width-type mould. The manufacturing techniques Using white cast iron structure, width-type mould are observable to the Iron Pot excavated from Sikrichong Ancient Tomb & Hwangnamdaechong grand Ancient Tomb around those were constructed the same time. It's able to recognize that it's almost identical manufacturing techniques at that time. Conservation is generically following those are survey of pretreatment, foreign material removal, stabilization, restoration and color matching in the order. cleaning & drying were added to the process as occasion demands. The strengthening treatment were difficult with artifact's volume, low concentration Paraloid NAD-10 solution was spread two or three times with a brush, surface hardening also came up with 15wt% Paraloid NAD-10 solution after the conservation was complete. There were connection & restoration for the restoration to the damage after modeling forms that it's similar to damaged parts by using the Fiber Reinforced Plastic resins(POLYCOAT FH-245, mold laminated type). Throughout this research, capitalizing on accumulations of measurements about the production technique of Iron Pot in the time of the fifth and 6th centuries is no less important than the Iron artifact's conservation for a better study in the future.

• Journal of Korean Society of Forest Science
• /
• v.35 no.1
• /
• pp.1-8
• /
• 1977

Forest soil fertility was evaluated through the approach of numerical method. In this study, the soil chemical properties analyzed for 35 different soil series as table 2 were cited in numerical analysis. Minimum contents of essential nutrients in the surface soil for a satisfactory growth of tree in the plantation were evaluated by comparing with Wild's standard as table 1. Demanding level of fertilization were evaluated by using the formula 1 as table 5. Similar relation of soil chemical properties between soil series were calculated through formula 2, and then classified into 5 groups in soil chemical properties. 1. General chemical properties of surface soil in case of 35 soil series. About 40 percent of 35 different soil series are less than 2 percent in organic matter, 10 ppm in available phosphorus, 1.25m.e/l00g in exchangeable calcium and 0.5m.e/l00g in exchangeable magnesium. Generally, shortage of exchangeable potash are not found. CEC less than 10m.e/l00g are in two thirds and strong acid soil less than PH 5.5 are in about four fifths. 2. Soil series requested or not the fertilization are indirectly evaluated from the formula 1 using the relative figure of chemical components of CEC, OM and MgO. Through this analysis, 8 different soil series have very poor quality in soil chemical capacity so that demands highly the fertilization. On the other hand, other 13 different soil series group have not been thought to need the fertilization according to chemical guality. 3. By the results comparing the similarity of chemical properties of forest soil, it is thought to be suitable that the forest soil fertility are divided into 5 groups as follows: 1. Low CEC soil 1-1 Low organic matter soil less than 2 percent 1-2 Medium organic matter soil less than 4 percent 2. High CEC and organic matter soil 2-1 Low magnesium soil 2-2 High magnesium soil 3. High magnesium and calcium soil as lime stone.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.20 no.4
• /
• pp.126-138
• /
• 2017

Recently, the national interest in environment is increasing and for dealing with water environment-related issues swiftly and accurately, the demand to facilitate the analysis of water environment data using a GIS is growing. To meet such growing demands, a spatial network data-based stream network analysis map(Korean Reach File; KRF) supporting spatial analysis of water environment data was developed and is being provided. However, there is a difficulty in delineating catchment areas, which are the basis of supplying spatial data including relevant information frequently required by the users such as establishing remediation measures against water pollution accidents. Therefore, in this study, the development of a computer program was made. The development process included steps such as designing a delineation method, and developing an algorithm and modules. DEM(Digital Elevation Model) and FDR(Flow Direction) were used as the major data to automatically delineate catchment areas. The algorithm for the delineation of catchment areas was developed through three stages; catchment area grid extraction, boundary point extraction, and boundary line division. Also, an add-in catchment area delineation module, based on ArcGIS from ESRI, was developed in the consideration of productivity and utility of the program. Using the developed program, the catchment areas were delineated and they were compared to the catchment areas currently used by the government. The results showed that the catchment areas were delineated efficiently using the digital elevation data. Especially, in the regions with clear topographical slopes, they were delineated accurately and swiftly. Although in some regions with flat fields of paddles and downtowns or well-organized drainage facilities, the catchment areas were not segmented accurately, the program definitely reduce the processing time to delineate existing catchment areas. In the future, more efforts should be made to enhance current algorithm to facilitate the use of the higher precision of digital elevation data, and furthermore reducing the calculation time for processing large data volume.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.39 no.2
• /
• pp.206-225
• /
• 2012

General status of pediatric dentistry in Korea is to conduct vigorous academic activities and specialized medical care centering the Korean Association of Pediatric Dentistry (KAPD) that has about 1,000 pediatric dentists as members, pediatric dentistry departments of 11 Colleges of Dentistry, numbers of pediatric dentistry training institutions and private clinics specialized in children. From 1996, the accredited pediatric dentists were produced by the KAPD and from 2008, the state began to produce the accredited pediatric dentists. Since then, doctors with expertise in pediatric care had opened private clinics in addition to the university hospitals, it became the basis of a momentum to deepen the specialty of pediatric dentistry. The Dentistry community of Korea is going through rapid and profound changes recently, and the underlying reasons for such changes can be classified largely into a few categories: (1) Decreasing population and structural changes in population (2) Increase in numbers of dentists, (3) Changes in the pattern of dental diseases and (4) Changes in medical environment. In Korea, the children population in the age range of 0 ~ 14 years old had been decreased by 2 million in 2010 compared to that of 2000 due to reduction of birth rate. The current population of children in the age range of 0 ~ 4 years old in 2010 takes up 16.2% of the total population, but it is estimated that such percentage would decrease to 8.0% by 2050. Such percentage is largely behind the estimated mean global population of 19.6% by 2050. On the other hand, the number of dentists had been largely increased from 18,000 in 2000 to 25,000 in 2010. And it is estimated that the number will be increased to 41,000 by 2030. In addition, the specialized personnel of Pediatric dentistry had been shown as increased by 2.5 times during past 10 years. For the changes in the pattern of dental diseases, including dental caries, each df rate of 5 years old children and 12 years old children had been decreased by 21.9% and 16.7% respectively in 2010 compared to 2000. Each df Index also had been decreased by 2.5 teeth and 1.2 teeth respectively. The medical expenditure of Korea is less than that of OECD and more specifically, the expenditure from the National Health Plan is less than OECD but the expenditure covered by households is larger than OECD. These facts indicate that it is considered as requiring the coverage of the national health plan to be reinforced more in the future and as such reinforcement needs continuous promotion. In medical examination pattern of Pediatric dentistry, the preventive and corrective treatment were increased whereas the restorative treatment was decreased. It is considered that such change is caused from decrease of dental caries from activation of the prevention project at national level. For the restorative treatment, the restorations in use of dental amalgam, pre-existing gold crowning and endodontic treatment had been decreased in their proportion while the restorative treatment in use of composite resin had been increased. It is considered that such changes is caused by the change of demands from patients and family or guardians as they desired more aesthetic improvement along with socio-economic growth of Korean society. Due to such changes in dentistry, the pediatric dentistry in Korea also attempts to have changes in the patterns of medical examination as follows; It tends to implement early stage treatment through early diagnosis utilizing various diagnostic tools such as FOTI or QLF. The early stage dental caries so called white spot had been included in the subjects for dental care or management and in order to do so, the medical care guidelines essentially accompanied with remineralization treatment as well as minimally invasive treatment is being generalized gradually. Also, centering the Pediatric dentists, the importance of caries risk assessment is being recognized, in addition that the management of dental caries is being changed from surgical approach to internal medicinal approach. Recently, efforts began to emerge in order to increase the target patients to be managed by dentists and to expand the application scope of Pediatric dentistry along with through such changes. The interest and activities of Pediatric dentists which had been limited to the medical examination room so far, is now being expanded externally, as they put efforts for participating in the preventive policy making process of the community or the state, and to support the political theories. And also opinions are being collected into the direction that the future- oriented strategic political tasks shall be selected and researches as well as presentations on the theoretical rationale of such tasks at the association level.

• The Korean Journal of Air & Space Law and Policy
• /
• v.1
• /
• pp.47-85
• /
• 1989

The Fundamental purpose of the Warsaw Convention was to establish uniform rules applicable to international air transportation. The emphasis on the benefits of uniformity was considered important in the beginning and continues to be important to the present. If the desire for uniformity is indeed the mortar which holds the Warsaw system together then it should be possible to agree on a worldwide liability limit. This liability limit would not be so unreasonable, that it would be impossible for nations to adhere to it. It would preclude any national supplemental compensation plan or Montreal Agreement type of requirement in any jurisdiction. The differentiation of liability limits by national requirement seems to be what is occurring. There is a plethora of mandated limits and Montreal Agreement type 'voluntary' limits. It is becoming difficult to find more than a few major States where an unmodified Warsaw Convention or Hague Protocol limitation is still in effect. If this is the real world in the 1980's, then let the treaty so reflect it. Upon reviewing the Warsaw Convention, its history and the several attempts to amend it, strengths become apparent. Hijackings of international flights have given rise to a number of lawsuits by passengers to recover damages for injuries suffered. This comment is concerned with the liability of an airline for injuries to its passengers resulting from aviation terrorism. In addition, analysis is focused on current airline security measures, particularly the pre-boarding screening system, and the duty of air carriers to prevent weapons from penetrating that system. An airline has a duty to exercise a high degree of care to protect its passengers from the threat of aviation terrorism. This duty would seemingly require the airline to exercise a high degree of care to prevent any passenger from smuggling a weapon or explosive device aboard its aircraft. In the case an unarmed hijacker who boards having no instrument in his possession with which to promote the hoax, a plaintiff-passenger would be hard-pressed to show that the airline was negligent in screening the hijacker prior to boarding. In light of the airline's duty to exercise a high degree of care to provide for the safety of all the passengers on board, an acquiescene to a hijacker's demands on the part of the air carrier could constitute a breach of duty only when it is clearly shown that the carrier's employees knew or plainly should have known that the hijacker was unarmed. A finding of willful misconduct on the part of an air carrier, which is a prerequisite to imposing unlimited liability, remains a question to be determined by a jury using the definition or standard of willful misconduct prevailing in the jurisdiction of the forum court. Through the willful misconduct provision of the Warsaw Convention, air carrier face the possibility of unlimited liability for failure to implement proper preventive precautions against terrorist. Courts, therefore, should broadly construe the willful misconduct provision of the Warsaw Convention in order to find unlimited liability for passenger injuries whenever air carrier security precautions are lacking. In this way, the courts can help ensure air carrier safety and prevention against terrorist attack. Air carriers, therefore, would have an incentive to increase, impose and maintain security precautions designed to thwart such potential terrorist attacks as in the case of Korean Air Lines Flight No.858 incident having a tremendous impact on the civil aviation community. The crash of a commercial airliner, with the attending tragic loss of life and massive destruction of property, always gives rise to shock and indignation. The general opinion is that the legal system could be sufficient, provided that the political will is there to use and apply it effectively. All agreed that the main responsibility for security has to be borne by the governments. I would like to remind all passengers that every discovery of the human spirit may be used for opposite ends; thus, aircraft can be used for air travel but also as targets of terrorism. A state that supports aviation terrorism is responsible for violation of International Aviation Law. Generally speaking, terrorism is a violation of international law. It violates the soverign rights of the states, and the human rights of the individuals. I think that aviation terrorism as becoming an ever more serious issue, has to be solved by internationally agreed and closely co-ordinated measures. We have to contribute more to the creation of a general consensus amongst all states about the need to combat the threat of aviation terrorism.

• Journal of the Microelectronics and Packaging Society
• /
• v.26 no.4
• /
• pp.75-82
• /
• 2019

Flexible solar cells have attracted enormous attention in recent years due to their wide applications such as portable batteries, wearable devices, robotics, drones, and airplanes. In particular, the demands of the flexible silicon and compound semiconductor solar cells with high efficiency and high reliability keep increasing. In this study, we fabricated a flexible InGaP/GaAs double-junction solar module. Then, the effects of the wind speed and ambient temperature on the operating temperature of the solar cell were analyzed with the numerical simulation. The temperature distributions of the solar modules were analyzed for three different wind speeds of 0 m/s, 2.5 m/s, and 5 m/s, and two different ambient temperature conditions of 25℃ and 33℃. The flexibility of the flexible solar module was also evaluated with the bending tests and numerical bending simulation. When the wind speed was 0 m/s at 25 ℃, the maximum temperature of the solar cell was reached to be 149.7℃. When the wind speed was increased to 2.5 m/s, the temperature of the solar cell was reduced to 66.2℃. In case of the wind speed of 5 m/s, the temperature of the solar cell dropped sharply to 48.3℃. Ambient temperature also influenced the operating temperature of the solar cell. When the ambient temperature increased to 33℃ at 2.5 m/s, the temperature of the solar cell slightly increased to 74.2℃ indicating that the most important parameter affecting the temperature of the solar cell was heat dissipation due to wind speed. Since the maximum temperatures of the solar cell are lower than the glass transition temperatures of the materials used, the chances of thermal deformation and degradation of the module will be very low. The flexible solar module can be bent to a bending radius of 7 mm showing relatively good bending capability. Neutral plane analysis was also indicated that the flexibility of the solar module can be further improved by locating the solar cell in the neutral plane.

• Management & Information Systems Review
• /
• v.22
• /
• pp.137-165
• /
• 2007

It seems high time to increase productivity by adopting e-business to overcome challenges posed by both external factors including the appreciation of Korean won, oil hikes and fierce global competition and domestic issues represented by disparities between large corporations and small and medium enterprises (SMEs), Seoul metropolitan and local cities, and export and domestic demand all of which weaken future growth engines in the Korean economy. The demands of the globalization era are for innovative changes in businessprocess and industrial structure aiming for creating new values. To this end, e-business is expected to play a core role in the sophistication of the Korean economy through new values and innovation. In order to examine business performance in e-business-adopting industries, this study analyzed the home shopping industry by closely looking into the financial ratios including the ratio of net profit to sales, the ratio of operation income to sales, the ratio of gross cost to sales cost, the ratio of gross cost to selling, general and administrative (SG&A) expense, and return of investment (ROI). This study, for best outcome, referred to corporate financial statements as a main resource to calculate financial ratios by utilizing Data Analysis, Retrieval and Transfer System (DART) of the Financial Supervisory Service, one of the Korea's financial supervisory authorities. First of all, the result of the trend analysis on the ratio of net profit to sales is as following. CJ Home Shopping has registered a remarkable increase in its ratio of net profit rate to sales since 2002 while its competitors find it hard to catch up with CJ's stunning performances. This is partly due to the efficient management compared to CJ's value of capital. Such significance, if the current trend continues, will make the front-runner assume the largest market share. On the other hand, GS Home Shopping, despite its best organized system and largest value of capital among others, lacks efficiency in management. Second of all, the result of the trend analysis on the ratio of operation income to sales is as following. Both CJ Home Shopping and GS Home Shopping have, until 2004, recorded similar growth trend. However, while CJ Home Shopping's operating income continued to increase in 2005, GS Home Shopping observed its operating income declining which resulted in the increasing income gap with CJ Home Shopping. While CJ Home Shopping with the largest market share in home shopping industryis engaged in aggressive marketing, GS Home Shopping due to its stability-driven management strategies falls behind CJ again in the ratio of operation income to sales in spite of its favorable management environment including its large capital. Companies in the Group B were established in the same year of 2001. NS Home Shopping was the first in the Group B to shift its loss to profit. Woori Home Shopping has continued to post operating loss for three consecutive years and finally was sold to Lotte Group in 2007, but since then, has registered a continuing increase in net income on sales. Third of all, the result of the trend analysis on the ratio of gross cost to sales cost is as following. Since home shopping falls into sales business, its cost of sales is much lower than that of other types of business such as manufacturing industry. Since 2002 in gross costs including cost of sales, SG&A expense, and non-operating expense, cost of sales turned out to have remarkably decreased. Group B has also posted a notable decline in the same sector since 2002. Fourth of all, the result of the trend analysis on the ratio of gross cost to SG&A expense is as following. Due to its unique characteristics, the home shopping industry usually posts ahigh ratio of SG&A expense. However, more than 80% of SG&A expense means the result of lax management and at the same time, a sharp lower net income on sales than other industries. Last but not least, the result of the trend analysis on ROI is as following. As for CJ Home Shopping, the curve of ROI looks similar to that of its investment on fixed assets. As it turned out, the company's ratio of fixed assets to operating income skyrocketed in 2004 and 2005. As far as GS Home Shopping is concerned, its fixed assets are not as much as that of CJ Home Shopping. Consequently, competition in the home shopping industry, at the moment, is among CJ, GS, Hyundai, NS and Woori Home Shoppings, and all of them need to more thoroughly manage their costs. In order for the late-comers of Group B and other home shopping companies to advance further, the current lax management should be reformed particularly on their SG&A expense sector. Provided that the total sales volume in the Internet shopping sector is projected to grow over 20 trillion won by the year 2010, it is concluded that all the participants in the home shopping industry should put strategies on efficient management on costs and expenses as their top priority rather than increase revenues, if they hope to grow even further after 2007.

• Korean Journal of Social Welfare
• /
• v.56 no.3
• /
• pp.159-181
• /
• 2004

This study examines the realities and causes of youth and new college graduate unemployment, and seeks some assignments for mitigating youth and new college graduate unemployment. An analysis of the realities and causes of youth and new college graduate unemployment is summarized as follows. First, youth unemployment rate, which rapidly increased after the IMF economic crisis, slowly decreased after 2000, but was still somewhat higher in 2002 than that before the IMF. Second, new college graduate unemployment rate, which rapidly increased after the IMF economic crisis, slowly decreased after 2000 and became a similar level to that before the IMF economic crisis, but the number of the unemployed new college graduates highly increased after the IMF. Third, an analysis of the causes of youth unemployment shows that economic growth and the employment elasticity of economic growth negatively affect the unemployment rate, and the rate of entrance into colleges positively affects the unemployment rate. Fourth, an analysis of the causes of new college graduate unemployment demonstrates that economic growth and the employment elasticity of economic growth negatively affect the unemployment rate, and the increase rate of new college graduates, the college graduate/youth population ratio, and the time trend positively affect the unemployment rate. These results suggest several implications for mitigating the unemployment rate of the youth and new college graduates. First, in order to increase labor demand, emphasis must be placed on preparing economic conditions which can raise economic growth rate and on fostering industries and occupations which have high employment elasticity. Second, in the aspect of labor supply, it is necessary to adjust the number of new college graduates corresponding to labor demands in industries. Third, in order to redress the mismatch between the demand and the supply of the youth labor market, attention should be paid to remedying educational systems such as the activation of vocational education and training in middle and high schools and the reformation of college education to match the education and training provided in colleges and the skills requirements of the world of work, and preparing a unified program to support the youth unemployed systematically and synthetically.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.2
• /
• pp.191-198
• /
• 2009

Statement of problem: Ceramics have been important materials for the restoration of teeth. The demands of patients for tooth-colored restorations and the availability of various dental ceramics has driven the increased use of new types of dental ceramic materials. Improved physical properties of theses materials have expanded its use even in posterior crowns and fixed partial dentures. However, ceramic still has limitation such as low loading capability. This is critical for long-span bridge, because bridge is more subject to tensile force. Purpose: The wire reinforced ceramic was designed to increase the fracture resistance of ceramic restoration. The purpose of this study was to evaluate the fracture resistance of wire reinforced ceramic. Material and methods: Heat pressed ceramic(ingot No.200 : IPS Empress 2, Ivoclar Vivadent, Liechtenstein) and Ni-Cr wire(Alfa Aesar, Johnson Matthey Company, USA) of 0.41 mm diameter were used in this study. Five groups of twelve uniform sized ceramic specimens(width 4 mm, thickness 2 mm, length 15 mm) were fabricated. Each group had different wire arrangement. Wireless ceramic was used as control group. The experimental groups were divided according to wire number and position. One, two and three strands of wires were positioned on the longitudinal axis of specimen. In another experimental group, three strands of wires positioned on the longitudinal axis and five strands of wires positioned on the transverse axis. Three-point bending test was done with universal testing machine(Z020, Zwick, Germany) to compare the flexural modulus, flexural strength, strain at fracture and fracture toughness of each group. Fractured ceramic specimens were cross-sectioned with caborundum disc and grinded with sandpaper to observe interface between ceramic and Ni-Cr wire. The interface between ceramic and Ni-Cr wire was analyzed with scanning electron microscope(JSM-6360, JEOL, Japan) under platinum coating. Results: The results obtained were as follows: 1. The average and standard deviation in flexural modulus, flexural strength and fracture toughness showed no statistical differences between control and experimental groups. However, strain was significantly increased in wire inserted ceramics(P<.001). 2. Control group showed wedge fracture aspects across specimen, while experimental groups showed cracks across specimen. 3. Scanning electron microscopic image of cross-sectioned and longitudinally-sectioned specimens showed no gap at the interface between ceramic and Ni-Cr wire. Conclusion: The results of this study showed that wire inserted ceramics have a high strain characteristic. However, wire inserted ceramics was not enough to use at posterior area of mouth in relation to flexural modulus and flexural strength. Therefore, we need further studies.