• Proceedings of the KOR-KST Conference
• /
• 1995.02a
• /
• pp.101-113
• /
• 1995

The objective of this research is to test the feasibility of developing a statewide truck traffic forecasting methodology for Wisconsin by using Origin-Destination surveys, traffic counts, classification counts, and other data that are routinely collected by the Wisconsin Department of Transportation (WisDOT). Development of a feasible model will permit estimation of future truck traffic for every major link in the network. This will provide the basis for improved estimation of future pavement deterioration. Pavement damage rises exponentially as axle weight increases, and trucks are responsible for most of the traffic-induced damage to pavement. Consequently, forecasts of truck traffic are critical to pavement management systems. The pavement Management Decision Supporting System (PMDSS) prepared by WisDOT in May 1990 combines pavement inventory and performance data with a knowledge base consisting of rules for evaluation, problem identification and rehabilitation recommendation. Without a r.easonable truck traffic forecasting methodology, PMDSS is not able to project pavement performance trends in order to make assessment and recommendations in the future years. However, none of WisDOT's existing forecasting methodologies has been designed specifically for predicting truck movements on a statewide highway network. For this research, the Origin-Destination survey data avaiiable from WisDOT, including two stateline areas, one county, and five cities, are analyzed and the zone-to'||'&'||'not;zone truck trip tables are developed. The resulting Origin-Destination Trip Length Frequency (00 TLF) distributions by trip type are applied to the Gravity Model (GM) for comparison with comparable TLFs from the GM. The gravity model is calibrated to obtain friction factor curves for the three trip types, Internal-Internal (I-I), Internal-External (I-E), and External-External (E-E). ~oth "macro-scale" calibration and "micro-scale" calibration are performed. The comparison of the statewide GM TLF with the 00 TLF for the macro-scale calibration does not provide suitable results because the available 00 survey data do not represent an unbiased sample of statewide truck trips. For the "micro-scale" calibration, "partial" GM trip tables that correspond to the 00 survey trip tables are extracted from the full statewide GM trip table. These "partial" GM trip tables are then merged and a partial GM TLF is created. The GM friction factor curves are adjusted until the partial GM TLF matches the 00 TLF. Three friction factor curves, one for each trip type, resulting from the micro-scale calibration produce a reasonable GM truck trip model. A key methodological issue for GM. calibration involves the use of multiple friction factor curves versus a single friction factor curve for each trip type in order to estimate truck trips with reasonable accuracy. A single friction factor curve for each of the three trip types was found to reproduce the 00 TLFs from the calibration data base. Given the very limited trip generation data available for this research, additional refinement of the gravity model using multiple mction factor curves for each trip type was not warranted. In the traditional urban transportation planning studies, the zonal trip productions and attractions and region-wide OD TLFs are available. However, for this research, the information available for the development .of the GM model is limited to Ground Counts (GC) and a limited set ofOD TLFs. The GM is calibrated using the limited OD data, but the OD data are not adequate to obtain good estimates of truck trip productions and attractions .. Consequently, zonal productions and attractions are estimated using zonal population as a first approximation. Then, Selected Link based (SELINK) analyses are used to adjust the productions and attractions and possibly recalibrate the GM. The SELINK adjustment process involves identifying the origins and destinations of all truck trips that are assigned to a specified "selected link" as the result of a standard traffic assignment. A link adjustment factor is computed as the ratio of the actual volume for the link (ground count) to the total assigned volume. This link adjustment factor is then applied to all of the origin and destination zones of the trips using that "selected link". Selected link based analyses are conducted by using both 16 selected links and 32 selected links. The result of SELINK analysis by u~ing 32 selected links provides the least %RMSE in the screenline volume analysis. In addition, the stability of the GM truck estimating model is preserved by using 32 selected links with three SELINK adjustments, that is, the GM remains calibrated despite substantial changes in the input productions and attractions. The coverage of zones provided by 32 selected links is satisfactory. Increasing the number of repetitions beyond four is not reasonable because the stability of GM model in reproducing the OD TLF reaches its limits. The total volume of truck traffic captured by 32 selected links is 107% of total trip productions. But more importantly, ~ELINK adjustment factors for all of the zones can be computed. Evaluation of the travel demand model resulting from the SELINK adjustments is conducted by using screenline volume analysis, functional class and route specific volume analysis, area specific volume analysis, production and attraction analysis, and Vehicle Miles of Travel (VMT) analysis. Screenline volume analysis by using four screenlines with 28 check points are used for evaluation of the adequacy of the overall model. The total trucks crossing the screenlines are compared to the ground count totals. L V/GC ratios of 0.958 by using 32 selected links and 1.001 by using 16 selected links are obtained. The %RM:SE for the four screenlines is inversely proportional to the average ground count totals by screenline .. The magnitude of %RM:SE for the four screenlines resulting from the fourth and last GM run by using 32 and 16 selected links is 22% and 31 % respectively. These results are similar to the overall %RMSE achieved for the 32 and 16 selected links themselves of 19% and 33% respectively. This implies that the SELINICanalysis results are reasonable for all sections of the state.Functional class and route specific volume analysis is possible by using the available 154 classification count check points. The truck traffic crossing the Interstate highways (ISH) with 37 check points, the US highways (USH) with 50 check points, and the State highways (STH) with 67 check points is compared to the actual ground count totals. The magnitude of the overall link volume to ground count ratio by route does not provide any specific pattern of over or underestimate. However, the %R11SE for the ISH shows the least value while that for the STH shows the largest value. This pattern is consistent with the screenline analysis and the overall relationship between %RMSE and ground count volume groups. Area specific volume analysis provides another broad statewide measure of the performance of the overall model. The truck traffic in the North area with 26 check points, the West area with 36 check points, the East area with 29 check points, and the South area with 64 check points are compared to the actual ground count totals. The four areas show similar results. No specific patterns in the L V/GC ratio by area are found. In addition, the %RMSE is computed for each of the four areas. The %RMSEs for the North, West, East, and South areas are 92%, 49%, 27%, and 35% respectively, whereas, the average ground counts are 481, 1383, 1532, and 3154 respectively. As for the screenline and volume range analyses, the %RMSE is inversely related to average link volume. 'The SELINK adjustments of productions and attractions resulted in a very substantial reduction in the total in-state zonal productions and attractions. The initial in-state zonal trip generation model can now be revised with a new trip production's trip rate (total adjusted productions/total population) and a new trip attraction's trip rate. Revised zonal production and attraction adjustment factors can then be developed that only reflect the impact of the SELINK adjustments that cause mcreases or , decreases from the revised zonal estimate of productions and attractions. Analysis of the revised production adjustment factors is conducted by plotting the factors on the state map. The east area of the state including the counties of Brown, Outagamie, Shawano, Wmnebago, Fond du Lac, Marathon shows comparatively large values of the revised adjustment factors. Overall, both small and large values of the revised adjustment factors are scattered around Wisconsin. This suggests that more independent variables beyond just 226; population are needed for the development of the heavy truck trip generation model. More independent variables including zonal employment data (office employees and manufacturing employees) by industry type, zonal private trucks 226; owned and zonal income data which are not available currently should be considered. A plot of frequency distribution of the in-state zones as a function of the revised production and attraction adjustment factors shows the overall " adjustment resulting from the SELINK analysis process. Overall, the revised SELINK adjustments show that the productions for many zones are reduced by, a factor of 0.5 to 0.8 while the productions for ~ relatively few zones are increased by factors from 1.1 to 4 with most of the factors in the 3.0 range. No obvious explanation for the frequency distribution could be found. The revised SELINK adjustments overall appear to be reasonable. The heavy truck VMT analysis is conducted by comparing the 1990 heavy truck VMT that is forecasted by the GM truck forecasting model, 2.975 billions, with the WisDOT computed data. This gives an estimate that is 18.3% less than the WisDOT computation of 3.642 billions of VMT. The WisDOT estimates are based on the sampling the link volumes for USH, 8TH, and CTH. This implies potential error in sampling the average link volume. The WisDOT estimate of heavy truck VMT cannot be tabulated by the three trip types, I-I, I-E ('||'&'||'pound;-I), and E-E. In contrast, the GM forecasting model shows that the proportion ofE-E VMT out of total VMT is 21.24%. In addition, tabulation of heavy truck VMT by route functional class shows that the proportion of truck traffic traversing the freeways and expressways is 76.5%. Only 14.1% of total freeway truck traffic is I-I trips, while 80% of total collector truck traffic is I-I trips. This implies that freeways are traversed mainly by I-E and E-E truck traffic while collectors are used mainly by I-I truck traffic. Other tabulations such as average heavy truck speed by trip type, average travel distance by trip type and the VMT distribution by trip type, route functional class and travel speed are useful information for highway planners to understand the characteristics of statewide heavy truck trip patternS. Heavy truck volumes for the target year 2010 are forecasted by using the GM truck forecasting model. Four scenarios are used. Fo~ better forecasting, ground count- based segment adjustment factors are developed and applied. ISH 90 '||'&'||' 94 and USH 41 are used as example routes. The forecasting results by using the ground count-based segment adjustment factors are satisfactory for long range planning purposes, but additional ground counts would be useful for USH 41. Sensitivity analysis provides estimates of the impacts of the alternative growth rates including information about changes in the trip types using key routes. The network'||'&'||'not;based GMcan easily model scenarios with different rates of growth in rural versus . . urban areas, small versus large cities, and in-state zones versus external stations. cities, and in-state zones versus external stations.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.3
• /
• pp.100-115
• /
• 2020

The manufacturing-oriented mobility system is being reorganized around the future mobility system represented by electrification, sharing, and autonomy, driven by the social demand for sustainable development. Changes in future mobility systems are expected to accelerate thanks to advances in IT technology. To this end, this study conducted an expert survey (N=23) to predict the direction of changes in the future mobility system. Through the survey, 'mobility sharing' was selected as a key factor in the future mobility system among four future mobility. In addition, 'safety' was selected as the most important service factors in future mobility system among eight future mobility service factors. We hope that the results of this study will be used as basic information to design policies and service directions of preparation for the future mobility system.

• Journal of Distribution Science
• /
• v.11 no.8
• /
• pp.5-14
• /
• 2013

Purpose - We live in a world of constant change and competition. Many airports have specific competitiveness goals and strategies for achieving and maintaining them. The global economic recession, financial crises, and rising oil prices have resulted in an increasingly important role for facility investment and renewal and the implementation of appropriate policies in ensuring the competitive advantage for airports. It is thus important to analyze the factors that enhance efficiency and productivity for an airport. This study aims to determine the efficiency levels of 20 major airports in East Asia, Europe, and North America. Further, this study also suggests suitable policies and strategies for their development. Research design, data, and methodology - This paper employs the DEA-CCR, DEA-BCC, and DEA-Malmquist production index analysis models to determine airport efficiency. The study uses data on the efficiency and productivity of the world's leading airports between 2006 and 2010. The input variables include the airport size, the number of runways, the size of passenger terminals, and the size of cargo terminals. The output variables include the annual number of passengers and the annual cargo volume. The study uses basic data from the 2010 World Airport Traffic Report (ACI). The world's top 20 airports (as rated by the ACI report) are investigated. The study uses the expanded DEA Model and the Super Efficiency Model to identify the most effective airports among the top 20. The Malmquist productivity index analysis is used to measure airport effectiveness. Results - This study analyzes longitudinal and cross-sectional data on the world's top 20 airports covering 2006 to 2010. A CCR analysis shows that the most efficient airports in 2010 were Gatwick Airport (LGW), Zurich Airport (ZRH), Vienna Airport (VIE), Leonardo da Vinci Fiumicino Airport (FCO), Los Angeles International Airport (LAX), Seattle-Tacoma Airport (SEA), San Francisco Airport (SFO), HongKong Airport (HKG), Beijing Capital International Airport (PEK), and Shanghai Pudong Airport (PVG). We find that changes in airport productivity are affected more by technical factors than by airport efficiency. Conclusions - Based on the study results, we offer four airport development proposals. First, a benchmark airport needs to be identified. Second, inefficiency must be reduced and high-cost factors need to be managed. Third, airport operations should be enhanced through technical innovation. Finally, scientific demand forecasting and facility preparation must become the focus of attention. This paper has some limitations. Because the Malmquist productivity index is based on the hypothesis of the, the identified production change could be over- or under-estimated. Further, as DEA estimates the relative efficiency. It also cannot generalize to include all airport conditions because the variables are limited. To measure airport productivity more accurately, other input variables and environmental variables such as financial and policy factors should be included.

• Korean Journal of Remote Sensing
• /
• v.33 no.5_2
• /
• pp.631-640
• /
• 2017

The estimation of rice yield affects the income of farmers as well as the fields related to agriculture. Moreover, it has an important effect on the government's policy making including the control of supply demand and the price estimation. Thus, it is necessary to build the crop yield estimation model and from the past, many studies utilizing empirical statistical models or artificial neural network algorithms have been conducted through climatic and satellite data. Presently, scientists have achieved successful results with deep learning algorithms in the field of pattern recognition, computer vision, speech recognition, etc. Among deep learning algorithms, the SSAE (Stacked Sparse AutoEncoder) algorithm has been confirmed to be applicable in the field of forecasting through time series data and in this study, SSAE was utilized to estimate the rice yield in South Korea. The climatic and satellite data were used as the input variables and different types of input data were constructed according to the period of rice growth in South Korea. As a result, the combination of the satellite data from May to September and the climatic data using the 16 day average value showed the best performance with showing average annual %RMSE (percent Root Mean Square Error) and region %RMSE of 7.43% and 7.16% that the applicability of the SSAE algorithm could be proved in the field of rice yield estimation.

• The Journal of Industrial Distribution & Business
• /
• v.11 no.8
• /
• pp.31-38
• /
• 2020

Purpose: This study uses 'Autoregressive Integrated Moving Average Model' to predict the impact of a sharp drop in the base rate due to COVID-19 at the present time when government policies for stabilizing house prices are in progress. The purpose of this study is to predict implications for the direction of the government's house policy by predicting changes in house transaction prices and house rental prices after a sharp cut in the base rate. Research design, data, and methodology: The ARIMA intervention model can build a model without additional information with just one time series. Therefore, it is a time-series analysis method frequently used for short-term prediction. After the subprime mortgage, which had shocked since the global financial crisis in April 2007, the bank's interest rate in 2020 is set at a time point close to zero at 0.75%. After that, the model was estimated using the interest rate fluctuations for the Bank of Korea base interest rate, the house transaction price index, and the house rental price index as event variables. Results: In predicting the change in house transaction price due to interest rate intervention, the house transaction price index due to the fall in interest rates was predicted to change after 3 months. As a result, it was 102.47 in April 2020, 102.87 in May 2020, and 103.21 in June 2020. It was expected to rise in the short term. In forecasting the change in house rental price due to interest rate intervention, the house rental price index due to the drop in interest rate was predicted to change after 3 months. As a result, it was 97.76 in April 2020, 97.85 in May 2020, and 97.97 in June 2020. It was expected to rise in the short term. Conclusions: If low interest rates continue to stimulate the contracted economy caused by COVID-19, it seems that there is ample room for house transaction and rental prices to rise amid low growth. Therefore, In order to stabilize the house price due to the low interest rate situation, it is considered that additional measures are needed to suppress speculative demand.

• Journal of Korea Port Economic Association
• /
• v.24 no.4
• /
• pp.153-171
• /
• 2008

The purpose of this paper is to estimate economic benefits for the investment of port hinterland. This research has conducted the empirical analysis, by calculating the investment of port hinterland. The key factor for the economic benefits for the hinterland is the utilizing throughputs. This demand is influenced by the throughput in the port. However the data is different between the different organizations. The positive opinions are prevailed about constructing of port hinterland by a optimistic view about throughput. However this paper analyzes the economic benefits by a pessimistic point of view. The main results of this paper are as follows: First, the port hinterland of Busan New Port does not have economic benefit for investment and the hinterland will face the overcapacity problem. We recommend that the plan for investment has to be considered the modification. Second, data of forecasted throughputs is an important factor for evaluation of hinterland's investment. The research for reliable forecasting of throughput has to be preceded for the pertinent evaluation of hinterland's investment.

• Korean Journal of Construction Engineering and Management
• /
• v.16 no.4
• /
• pp.12-20
• /
• 2015

Construction industry has played a pivotal role in the national economy, but the crisis situation of a construction industry has been worse due to the lack of recognition of the contribution of a construction industry. In particular, the transport sector is responsible for a critical function in the movement of humans and material resources, and has a profound impact on national competitiveness and the peoples' welfare, which requires quantitative analysis. In this study, economic contribution and impact of the transportation sector are measured based on the input-output model. Road and railway facilities account for 1.03% and 0.165% of the total industry respectively, and consist of a final demand and total output. Although value-added inducing effect is small, production inducing effect and backward linkage effect has been high. The results in this study will be used as the basic information for validity of investment and policy decisions.

• Journal of Korean Society of Transportation
• /
• v.26 no.2
• /
• pp.17-24
• /
• 2008

Traffic accident forecasting model has been developed steadily to understand factors affecting traffic accidents and to reduce them. In Korea, the length of highways is over 3,000km, and it is within the top ten in the world. However, the number of accidents-per-one kilometer highway is higher than any other countries. The rapid increase of travel demand and transportation infrastructures since 1980's may influence on the high rates of traffic accident. Accident severity is one of the important indices as well as the rate of accident and factors such as road geometric conditions, driver characteristics and type of vehicles may be related to traffic accident severity. However, since all these factors are interacted complicatedly, the interactions are not easily identified. A structural equations model is adopted to capture the complex relationships among variables. In the model estimation, we use 2,880 accident data on highways in Korea. The SEM with several factors mentioned above as endogenous and exogenous variables shows that they have complex and strong relationships.

• Journal of Energy Engineering
• /
• v.22 no.2
• /
• pp.211-225
• /
• 2013

To run an optimal operation of Integrated energy supply facilities, we need to analyze heat consumption patterns of District heating users and derive optimum and maximum load ratio of heat production facilities unit. This study selects three District heat production facilities. It also classifies District heating users into residential apartment buildings and eight non-residential buildings and analyzes heat consumption results for an year. Finally it carries out the analysis of how the ratio change of each type affects maximum load ratio, facility utilization ratio, heat supply range. According to this study, three different District heat facilities of residential apartment building show similar daily and annual heat consumption patterns. Annual average load ratio, maximum load ratio and annual heat demand increase as outdoor temperatures decrease. Non-residential buildings in urban District focused on apartment buildings display similar by the daily and annual heat consumption patterns. Yet their daily and annual maximum load ratio differ according to outdoor temperature, District, building types and their composition ratio. In the case of urban District focused on apartment buildings reach optimum and maximum load ratio when apartment buildings reaches 60-70% of the total. At that point heat supply range becomes maximized and the most economic efficiency is obtained.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.4
• /
• pp.611-616
• /
• 2018

With the recent increase in awareness of the diversification of patterns of warfare and security, technological evolution is occurring in the field of autonomous defense robots. As defense science and technology develops with the development of the concept of military utilization focusing on human lives and economic operation, the importance of autonomous robots in the effect-oriented future battlefield is increasing. The major developed countries have developed core technologies, investment strategies, priorities, data securing strategies and infrastructure development related to the field of autonomous defense robots, and research activities such as technology planning and policy strategy for autonomous defense robots in Korea have already begun. In addition, the field of autonomous defense robots encompasses technologies that represent the fourth industrial revolution, such as artificial intelligence, big data, and virtual reality, and so the expectations for this future area of technology are very high. It is difficult to predict the path of technological development due to the increase in the demand for new rather than existing technology. Moreover, the selection and concentration of strategic R&D is required due to resource constraints. It is thought that a preemptive response is needed. This study attempts to derive 6 new technologies that will shape the future of autonomous defense robots and to obtain meaningful results through an empirical study.