• Aerospace Engineering and Technology
• /
• v.6 no.2
• /
• pp.245-249
• /
• 2007

The objective of the UAV removes the life loss of the pilot who is the maximum weak point of the manned reconnaissance aircraft, accomplishes the reconnaissance it is an aircraft for. The camera which will confirm the pilot substitution reconnaissance result which stands is necessary, we should confirm; the target which this camera probably is what. The report which described like this demand condition against the consideration fact which is necessary to the selection of the image sensory device which is a camera which with character will be applied in UAV.

• Korean Management Science Review
• /
• v.18 no.2
• /
• pp.97-105
• /
• 2001

For the airplane manufacturing industry, to decide the sloe of developing airplane is very important because it affect the developing costs, the type of production industry like national independence production or international cooperation production, etc.. And the decision must be made by the base of national aviation industry, status of technology, economic factors and national and international demand, etc. This paper was studied to present a model for the application of AHP to the decision of optimum size of Korean developing airliner. For this study, a questionnaire was developed In respect to the criteria of developing airliner and given to 50 of professors, researchers and experts who participated in this part. The AHP software developed by Korean Advanced Institute of Science Technology (KAIST) was used to analyze the data.

• Proceedings of the Technology Innovation Conference
• /
• 1999.06a
• /
• pp.119-139
• /
• 1999

The rapid development and diversification of technology require that firms should adjust and cope with a high degree of uncertainty. An alternative to these strategic responses is the recent increase in the number of R&D or technological collaborations among firms. There have been continuous researches into the causes and effects of these collaborative relationships, but there is a lack of research that examines the risks involved in the process of collaboration. The researches into essential prerequisites for a successful technological collaboration have remained at the superficial level despite the surge in demand of R&D collaboration. Therefore, this study proposes positive & negative factors affecting the R&D collaboration process and selection point. In addition, a further step in analysis is taken by integrating both the positive & negative factors. This study emphasizes the importance of inter-trust in activating the process factors within the success factors and reducing the possibility of risk factors.

• Journal of Korean Society for Quality Management
• /
• v.18 no.1
• /
• pp.116-128
• /
• 1990

Consumer's demand level for products and goods selection power is considerably improved. The pressure of loss compensation is also being accelerated by products which bring damage on property. The producer prevents the loss from causing poor products and considering the quality cost allotment in these circumstances. That is to say, producer should be concerned with the strategy of product liability prevention instead of passive defence policy. This paper intends to estabilish the optimum quality cost in considering product liability, and present the correlation of quality cost elements and multiple regression analysis. It can utilized in qualitycost and budget planning.

• The Korean Journal of Ceramics
• /
• v.4 no.4
• /
• pp.368-371
• /
• 1998

The work aims to evaluate the necessary physical properties of Abrasion Resistant Pavers designed for high volume pedestrian and road vehicle traffic and their influence on the selection of raw materials and ceramic processes. The pavers' specifications such as high strength and ware resistance demand a careful clay preparation, slow drying, slow firing and a balanced chemical and mineralogical composition. Therefore, developing abrasion Resistant Pavers in existing modern brickmaking plants, which are designed primarily for making bricks and pavers for domestic applications, has become a challenge for manufacturers and ceramic professionals. The significance of quality control and research and development in the production of these high class pavers is also emphasised in this work through the investigation of a paver that exhibits shrinkage cracking.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.54 no.5
• /
• pp.226-233
• /
• 2005

As the power demand has been increasing, a fault current problem is becoming more serious in real power system. Various ways like bus-split operation, transmission line open operation, are used in Korean power system for solving the problem. In this time, superconducting FCL(Fault Current Limiter) has been developed as a vary attractive alternative since HTS(High Temperature Superconductivity) was discovered. Korea, a project developing superconducting FCL to apply to 154kV transmission system is proceeding. Therefore, a power system analysis for SFCL application to power system is necessary, This paper presents the determination of quenching resistance and the selection of optimal cites when 154kV HTS-FCL is applied to Korean power system.

• Proceedings of the KIEE Conference
• /
• 2001.11b
• /
• pp.207-209
• /
• 2001

Intensive competition in the electricity market and demand for higher quality service force the utilities to change their strategies in setting price and quality combination. As cost-up by homogeneously enhancing the electricity service quality may reduce their competitiveness, differential service is to be taken into consideration. Priority Service, which provides customers with a selection of service options at a range of prices and reliability for all or portions of their loads, has drawn attention from utilities in an increasingly competitive environment. Priority Service is to enlarge service options for customers who have diverse needs for supply reliability. This paper in the light of this point reviews differentiated strategy of power quality in the U.S.A.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2004.10a
• /
• pp.611-614
• /
• 2004

현실에서의 공급사슬에 대한 분배 계획은 수요예측(forecasting)을 통해 얻어진 확률적인 분포(stochastic distribution)를 바탕으로 수립된다. 그러나 이러한 수요예측 값은 특정한 한 값을 갖는 것이 아니라 일반적으로 특정한 범위로써 존재하며 이 범위 내의 한 값을 의사 결정자가 선택하고 이를 바탕으로 분배 계획을 수립하게 된다. 하지만 수요의 불확실한 특성 때문에 효과적인 값을 결정하는 것은 쉬운 일이 아니다. 따라서 본 연구에서는 확률적인 형태의 다양한 수요 분포 형태를 정의하고, 이러한 여러 가지 분포 하에서 수요 선택에 영향을 주는 요소들을 판명한다. 이를 바탕으로 적절한 실험계획과 모의실험을 통해서 효과적인 수요선택 방안을 도출한다. 이와 같은 접근 방법을 통해 다양한 실험 조건 하에서 공급 사슬 내의 총 비용을 최소화 시키면서 동시에 목표로 하는 서비스 수준(target service level)을 만족하는 수요 선택 방안을 제시한다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2003.10c
• /
• pp.475-477
• /
• 2003

본 논문에서는 IEEE 802.11 을 기반으로 하는 무선 Ad Hoc 망에서 데이터의 송신자 노드와 목적지 노드의 중간 노드들의 전송을 방해하고 채널을 경쟁하는 경쟁노드들이 Shortest­path 라우팅 경로 설정에 미치는 영향을 분석한다. 데이터를 전송하는 중간 노드들이 다수의 경쟁노드를 가지고 있을 경우 MAC delay 가 큰 변수로 작용하며 multi­hop 환경이기 때문에 hidden terminal 문제가 발생한다. 또한 AODV 와 같은 on­demand 라우팅 알고리즘은 경로를 찾기 위해서 Route Request 패킷을 브로드캐스트 하는데 이때 브로드캐스트 패킷의 성공적인 전송이 보장되지 않기 때문에 경쟁노드의 방해가 심한 경우 경로를 찾는데 실패할 가능성이 높아진다. 본 논문에서는 이러한 특성들을 근거로 경쟁노드의 수와 분포가 라우팅 경로 선택에 영향을 미친다는 것을 지적한다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2015.10a
• /
• pp.239-240
• /
• 2015

This study aims to clarify current situation of transportation flow and determine to demand forecasting in new route between Korea and Mongolia. By follows the mongolia government information, there will be open 5 new routes in nearest 10 years. Thus, this study purpose is determining the efficiency way by consider time and cost factors for new route between Korea and Mongolia.