• Design & Manufacturing
• /
• v.17 no.3
• /
• pp.21-27
• /
• 2023

The mold industry in Japan, an advanced country in the mold industry, is also at a point of great change. The main causes are the Ukraine crisis and the collapse of the global supply chain (parts supply chain) caused by COVID-19. In addition, the prices of overseas products are rising sharply due to rapid exchange rate fluctuations (decrease in the value of the yen). Until now, Japan's monotsukuri industry has been actively pursuing overseas expansion, riding the trend of globalization. However, the trend began to rapidly reverse, and now the monotsukuri industry that had expanded overseas is showing a tendency to return to Japan. Another factor of change is the change in the automobile industry, which is the most demanded product in the mold industry. As the automobile industry evolves from gasoline cars to electric cars, the number of parts that make up a car will drastically decrease. This trend is expected to increase the demand for small-scale production of a variety of products in the mold industry, and furthermore, it is expected that short delivery times will be required in parts development. As in Korea, the production population working in the mold industry is rapidly decreasing in Japan as well. Even if you add up the total population working in manufacturing in Japan, it only accounts for about 15%. Even in Japan, it is judged that it will be difficult to sustain the monotsukuri industry with this small production population. Therefore, since improvement in production efficiency cannot be expected with the same manual dexterity as before, the mold industry is also demanding the development of mold technology at a different level than before to increase productivity. In this paper, I would like to introduce new Japanese mold technology collected through attending the Intermold exhibition. This is an example of applying a dedicated pin (Gastos) to a mold to prevent an increase in internal pressure during plastic injection molding, and a deep drawing press molding technology with an inherent hydraulic function.

• Information Systems Review
• /
• v.24 no.3
• /
• pp.43-68
• /
• 2022

With the growing demand for online food delivery (OFD) services via Online to Offline (O2O) platforms, it is required for academic researchers to identify the success factors of OFD businesses. In line with this, this research examines the impact of the core service attributes of a restaurant (hygiene, interactivity, trust,and popularity) on business success in the OFD platform context from the perspective of information asymmetry. Furthermore, the moderating effects of hygiene factor between the core service attributes and the success of restaurants are evaluated. We utilize 1,146 restaurants registered on the largest OFD platform in Korea. The results of this study demonstrate that hygiene (certification), trust (franchise), popularity (favorite) factors have positive impacts on the success of OFD businesses. Moreover, we find that franchise restaurants with high response rates to customer reviews and inquiries achieve higher sales when they have hygiene certifications than those without the certification do. The key findings bear significant contributions to prior literature by empirically substantiating the pivotal role of service quality signals in fostering restaurant success on the OFD platforms. In addition, this study provides business implications for restaurants in O2O platform.

• Knowledge Management Research
• /
• v.25 no.1
• /
• pp.193-215
• /
• 2024

This study aims to identify the main factors that caused the digital divide during the COVID-19 pandemic. Utilizing data from the 2020 and 2021 Digital Divide Surveys by the National Information Agency, a research model was constructed for analysis using SmartPLS 4, applying PLS-SEM and Multigroup Analysis methods. The results of the study are as follows. First, combining 2020 and 2021, mobile internet usage during COVID-19 is positively associated with digital skills, digital usage, and usage outcomes except for networking. Second, the impact of digital usage was significantly higher during the outbreak than during the beginning of COVID-19, which may be due to the increased demand for digital usage as the outbreak continued, and the corresponding increase in internet usage. Third, we discovered that demographics are not the main factor affecting changes in mobile internet use during the COVID-19 pandemic. Instead, digital literacy affects mobile usage, which is the most important one. The results show the importance of creating programs to teach people how to use technology appropriately. We propose that digital literacy should be central to training programs for people who use digital services.

• Environmental and Resource Economics Review
• /
• v.33 no.2
• /
• pp.159-178
• /
• 2024

This study aims to assess the direct and indirect impacts of local fiscal expenditures on water quality. Panel data spanning from 2010 to 2018 for 173 cities and districts in Korea are assembled, and a two-stage dynamic panel model is utilized for our estimation. The empirical findings reveal several key insights. Firstly, local fiscal expenditures on water quality are effective in ameliorating both Biological Oxygen Demand (BOD) and Total Phosphorus (T-P). Notably, the direct impact on T-P surpasses that on BOD in the short and long run. Secondly, expenditures dedicated to water quality improvement demonstrate a positive effect on local economic growth, and an inverted U-shaped relationship is observed between BOD and local economic growth. Due to the positive linkage, the indirect effect on BOD suggests, on average, a deterioration in water quality during local economic growth. Thirdly, concerning BOD, the direct effect of government expenditure on water quality improvement outweighs the indirect effect, but in the case of T-P, the indirect effect is not significant, and the total effect is solely determined by the direct impact. Despite local fiscal expenditures potentially exacerbating water quality through regional economic growth, the study finds that the direct enhancement of water quality remains a more substantial factor in the short and long run.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.26 no.4
• /
• pp.35-50
• /
• 2023

As urbanization progresses, there is a growing and continuous demand for green spaces that provide ecosystem services. However, increasing the quantity of green spaces within major cities is challenging. Therefore, it is essential to pursue qualitative improvements that consider ecological characteristics of existing green spaces. In this study, we focus on local neighborhood parks in Seoul and present the following two questions through an evaluation utilizing ecological design indicators and land use data: 1. Which factor, design or location, has a greater influence on the ecological quality of neighborhood parks in Seoul? 2. Additionally, when evaluating ecological characteristics, is there similarity between assessments based on land-use data and those utilizing ecological design indicators? For this study, we conducted research on 30 neighborhood parks in Seoul and classified them into mountainous types (adjacent to mountains, natural terrain parks) and urban types (independently designed within 300m without existing forests) based on previous studies. Firstly, we conducted evaluations according to park location types. When comparing the evaluation scores of urban types (14 parks) and mountainous types (16 parks), significant differences were observed with scores of 16.86 and 35.94, respectively. Statistical analysis showed a significant difference between park types. In terms of habitat quality, the average values for urban and mountainous parks were 0.33 and 0.53, respectively, and statistically significant differences were observed between park types indicating differences in ecological potential according to park location. Secondly, when comparing the results of ecological potential evaluations based on park design and external connectivity, a correlation was found between habitat quality and total scores according to evaluation indicators. The correlation analysis showed significant linear relationships between habitat quality and total scores, biodiversity scores, and ecosystem function scores, with high positive correlation coefficients of 0.829, 0.861, and 0.802, respectively. This study holds significance in analyzing the ecological aspects of urban parks through the lens of both park location characteristics and design indicators. The analysis results underscore the importance of planning and managing ecologically sound urban parks contingent upon their location. Moreover, the utilization of appropriate ecological design indicators can help alleviate environmental limitations surrounding parks. Integrating these considerations could enhance the ecological quality and ecosystem services of urban green spaces.

• Journal of Internet of Things and Convergence
• /
• v.10 no.3
• /
• pp.19-24
• /
• 2024

Recent advances in large-scale data processing technologies such as big data, cloud computing, and artificial intelligence have increased the demand for high-performance storage devices in data centers and enterprise environments. In particular, the fast data response speed of storage devices is a key factor that determines the overall system performance. Solid state drives (SSDs) based on the Non-Volatile Memory Express (NVMe) interface are gaining traction, but new bottlenecks are emerging in the process of handling large data input and output requests from multiple hosts simultaneously. SSDs typically process host requests by sequentially stacking them in an internal queue. When long transfer length requests are processed first, shorter requests wait longer, increasing the average response time. To solve this problem, data transfer timeout and data partitioning methods have been proposed, but they do not provide a fundamental solution. In this paper, we propose a dual queue based scheduling scheme (DQBS), which manages the data transfer order based on the request order in one queue and the transfer length in the other queue. Then, the request time and transmission length are comprehensively considered to determine the efficient data transmission order. This enables the balanced processing of long and short requests, thus reducing the overall average response time. The simulation results show that the proposed method outperforms the existing sequential processing method. This study presents a scheduling technique that maximizes data transfer efficiency in a high-performance SSD environment, which is expected to contribute to the development of next-generation high-performance storage systems

• Proceedings of the KOR-KST Conference
• /
• 1995.02a
• /
• pp.101-113
• /
• 1995

The objective of this research is to test the feasibility of developing a statewide truck traffic forecasting methodology for Wisconsin by using Origin-Destination surveys, traffic counts, classification counts, and other data that are routinely collected by the Wisconsin Department of Transportation (WisDOT). Development of a feasible model will permit estimation of future truck traffic for every major link in the network. This will provide the basis for improved estimation of future pavement deterioration. Pavement damage rises exponentially as axle weight increases, and trucks are responsible for most of the traffic-induced damage to pavement. Consequently, forecasts of truck traffic are critical to pavement management systems. The pavement Management Decision Supporting System (PMDSS) prepared by WisDOT in May 1990 combines pavement inventory and performance data with a knowledge base consisting of rules for evaluation, problem identification and rehabilitation recommendation. Without a r.easonable truck traffic forecasting methodology, PMDSS is not able to project pavement performance trends in order to make assessment and recommendations in the future years. However, none of WisDOT's existing forecasting methodologies has been designed specifically for predicting truck movements on a statewide highway network. For this research, the Origin-Destination survey data avaiiable from WisDOT, including two stateline areas, one county, and five cities, are analyzed and the zone-to'||'&'||'not;zone truck trip tables are developed. The resulting Origin-Destination Trip Length Frequency (00 TLF) distributions by trip type are applied to the Gravity Model (GM) for comparison with comparable TLFs from the GM. The gravity model is calibrated to obtain friction factor curves for the three trip types, Internal-Internal (I-I), Internal-External (I-E), and External-External (E-E). ~oth "macro-scale" calibration and "micro-scale" calibration are performed. The comparison of the statewide GM TLF with the 00 TLF for the macro-scale calibration does not provide suitable results because the available 00 survey data do not represent an unbiased sample of statewide truck trips. For the "micro-scale" calibration, "partial" GM trip tables that correspond to the 00 survey trip tables are extracted from the full statewide GM trip table. These "partial" GM trip tables are then merged and a partial GM TLF is created. The GM friction factor curves are adjusted until the partial GM TLF matches the 00 TLF. Three friction factor curves, one for each trip type, resulting from the micro-scale calibration produce a reasonable GM truck trip model. A key methodological issue for GM. calibration involves the use of multiple friction factor curves versus a single friction factor curve for each trip type in order to estimate truck trips with reasonable accuracy. A single friction factor curve for each of the three trip types was found to reproduce the 00 TLFs from the calibration data base. Given the very limited trip generation data available for this research, additional refinement of the gravity model using multiple mction factor curves for each trip type was not warranted. In the traditional urban transportation planning studies, the zonal trip productions and attractions and region-wide OD TLFs are available. However, for this research, the information available for the development .of the GM model is limited to Ground Counts (GC) and a limited set ofOD TLFs. The GM is calibrated using the limited OD data, but the OD data are not adequate to obtain good estimates of truck trip productions and attractions .. Consequently, zonal productions and attractions are estimated using zonal population as a first approximation. Then, Selected Link based (SELINK) analyses are used to adjust the productions and attractions and possibly recalibrate the GM. The SELINK adjustment process involves identifying the origins and destinations of all truck trips that are assigned to a specified "selected link" as the result of a standard traffic assignment. A link adjustment factor is computed as the ratio of the actual volume for the link (ground count) to the total assigned volume. This link adjustment factor is then applied to all of the origin and destination zones of the trips using that "selected link". Selected link based analyses are conducted by using both 16 selected links and 32 selected links. The result of SELINK analysis by u~ing 32 selected links provides the least %RMSE in the screenline volume analysis. In addition, the stability of the GM truck estimating model is preserved by using 32 selected links with three SELINK adjustments, that is, the GM remains calibrated despite substantial changes in the input productions and attractions. The coverage of zones provided by 32 selected links is satisfactory. Increasing the number of repetitions beyond four is not reasonable because the stability of GM model in reproducing the OD TLF reaches its limits. The total volume of truck traffic captured by 32 selected links is 107% of total trip productions. But more importantly, ~ELINK adjustment factors for all of the zones can be computed. Evaluation of the travel demand model resulting from the SELINK adjustments is conducted by using screenline volume analysis, functional class and route specific volume analysis, area specific volume analysis, production and attraction analysis, and Vehicle Miles of Travel (VMT) analysis. Screenline volume analysis by using four screenlines with 28 check points are used for evaluation of the adequacy of the overall model. The total trucks crossing the screenlines are compared to the ground count totals. L V/GC ratios of 0.958 by using 32 selected links and 1.001 by using 16 selected links are obtained. The %RM:SE for the four screenlines is inversely proportional to the average ground count totals by screenline .. The magnitude of %RM:SE for the four screenlines resulting from the fourth and last GM run by using 32 and 16 selected links is 22% and 31 % respectively. These results are similar to the overall %RMSE achieved for the 32 and 16 selected links themselves of 19% and 33% respectively. This implies that the SELINICanalysis results are reasonable for all sections of the state.Functional class and route specific volume analysis is possible by using the available 154 classification count check points. The truck traffic crossing the Interstate highways (ISH) with 37 check points, the US highways (USH) with 50 check points, and the State highways (STH) with 67 check points is compared to the actual ground count totals. The magnitude of the overall link volume to ground count ratio by route does not provide any specific pattern of over or underestimate. However, the %R11SE for the ISH shows the least value while that for the STH shows the largest value. This pattern is consistent with the screenline analysis and the overall relationship between %RMSE and ground count volume groups. Area specific volume analysis provides another broad statewide measure of the performance of the overall model. The truck traffic in the North area with 26 check points, the West area with 36 check points, the East area with 29 check points, and the South area with 64 check points are compared to the actual ground count totals. The four areas show similar results. No specific patterns in the L V/GC ratio by area are found. In addition, the %RMSE is computed for each of the four areas. The %RMSEs for the North, West, East, and South areas are 92%, 49%, 27%, and 35% respectively, whereas, the average ground counts are 481, 1383, 1532, and 3154 respectively. As for the screenline and volume range analyses, the %RMSE is inversely related to average link volume. 'The SELINK adjustments of productions and attractions resulted in a very substantial reduction in the total in-state zonal productions and attractions. The initial in-state zonal trip generation model can now be revised with a new trip production's trip rate (total adjusted productions/total population) and a new trip attraction's trip rate. Revised zonal production and attraction adjustment factors can then be developed that only reflect the impact of the SELINK adjustments that cause mcreases or , decreases from the revised zonal estimate of productions and attractions. Analysis of the revised production adjustment factors is conducted by plotting the factors on the state map. The east area of the state including the counties of Brown, Outagamie, Shawano, Wmnebago, Fond du Lac, Marathon shows comparatively large values of the revised adjustment factors. Overall, both small and large values of the revised adjustment factors are scattered around Wisconsin. This suggests that more independent variables beyond just 226; population are needed for the development of the heavy truck trip generation model. More independent variables including zonal employment data (office employees and manufacturing employees) by industry type, zonal private trucks 226; owned and zonal income data which are not available currently should be considered. A plot of frequency distribution of the in-state zones as a function of the revised production and attraction adjustment factors shows the overall " adjustment resulting from the SELINK analysis process. Overall, the revised SELINK adjustments show that the productions for many zones are reduced by, a factor of 0.5 to 0.8 while the productions for ~ relatively few zones are increased by factors from 1.1 to 4 with most of the factors in the 3.0 range. No obvious explanation for the frequency distribution could be found. The revised SELINK adjustments overall appear to be reasonable. The heavy truck VMT analysis is conducted by comparing the 1990 heavy truck VMT that is forecasted by the GM truck forecasting model, 2.975 billions, with the WisDOT computed data. This gives an estimate that is 18.3% less than the WisDOT computation of 3.642 billions of VMT. The WisDOT estimates are based on the sampling the link volumes for USH, 8TH, and CTH. This implies potential error in sampling the average link volume. The WisDOT estimate of heavy truck VMT cannot be tabulated by the three trip types, I-I, I-E ('||'&'||'pound;-I), and E-E. In contrast, the GM forecasting model shows that the proportion ofE-E VMT out of total VMT is 21.24%. In addition, tabulation of heavy truck VMT by route functional class shows that the proportion of truck traffic traversing the freeways and expressways is 76.5%. Only 14.1% of total freeway truck traffic is I-I trips, while 80% of total collector truck traffic is I-I trips. This implies that freeways are traversed mainly by I-E and E-E truck traffic while collectors are used mainly by I-I truck traffic. Other tabulations such as average heavy truck speed by trip type, average travel distance by trip type and the VMT distribution by trip type, route functional class and travel speed are useful information for highway planners to understand the characteristics of statewide heavy truck trip patternS. Heavy truck volumes for the target year 2010 are forecasted by using the GM truck forecasting model. Four scenarios are used. Fo~ better forecasting, ground count- based segment adjustment factors are developed and applied. ISH 90 '||'&'||' 94 and USH 41 are used as example routes. The forecasting results by using the ground count-based segment adjustment factors are satisfactory for long range planning purposes, but additional ground counts would be useful for USH 41. Sensitivity analysis provides estimates of the impacts of the alternative growth rates including information about changes in the trip types using key routes. The network'||'&'||'not;based GMcan easily model scenarios with different rates of growth in rural versus . . urban areas, small versus large cities, and in-state zones versus external stations. cities, and in-state zones versus external stations.

• The Journal of Fisheries Business Administration
• /
• v.17 no.1
• /
• pp.77-106
• /
• 1986

In the field of fisheries, there is at the apex Central Federation of Fishery Cooperatives, established under the Fishery Cooperatives Law(1962), It is a multipurpose organization with a membership of 105 cooperatives, 87 regional cooperatives, 15 business-type cooperatives and 3 manufactures' cooperatives. Accordingly, this thesis examines the marketing of fishery cooperatives in Korea, and in particular considers the marketing channel strategy of fisheries products. No company can perform by itself all the activities involved in the production and distribution of its products and services to its final markets. It must work with other firms to get the job done. Thus marketing channel firms of the fisheries products include primarily the fishery cooperatives, the licensed In the field of fisheries, there is at the apex Central Federation of Fishery Cooperatives, established under the Fishery Cooperatives Law (1962). It is a multipurpose organization with a membership of 105 cooperatives, 87 regional cooperatives, 15 business-type cooperatives and 3 manufactures' cooperatives. Accordingly, this thesis examines the marketing of fishery cooperatives in Korea, and in particular considers the marketing channel strategy of fisheries products. No company can perform by itself all the activities involved in the production and distribution of its products and services to its final markets. It must work with other firms to get the job done. Thus marketing channel firms of the fisheries products include primarily the fishery cooperatives, the licensed dealers and the merchant middlemen. The goal of marketing is in matching of segments of supply and demand. Every producer seeks to the link the marketing channel firms that will help it accomplish its objective best. This thesis tries to attempt to improve the present Korean Fishery Cooperatives marketing activities. The purpose of the operation of fishery cooperatives is to guarantee the profits of fisherman as well as the interests of general consumers by eliminating the inordinate profits of middlemen and by narrowing other market margins. Fishery cooperatives marketing activity functions forming a self-helf organization for economic protection of producers themselves, and acting as a market reformational institution through its transaction by group. The following are the characteristics of fishery cooperatives marketing. \circled1 Fishery cooperatives is organized with an economic factor and a personnel factor. \circled2 Fishery cooperatives is non-profit organization. \circled3 The members of fishery cooperatives is independent constitution of economy, but they are closely connected with the cooperative. \circled4 Fishery cooperatives is a mutual aid organization. The objective of an efficient marketing strategy may be well described by the common saying provides the right product at the right time, the right place, and the right price. But it is quite true that the Korean Fishermen's Cooperative can be said to owe its development to the successful implementation of the marketing system. The use of the marketing system has resulted in the following marketing strategy. 1. The direct marketing system. \circled1 The cooperation between the fishery cooperatives and the other cooperative through the collection and delivery center. \circled2 The selling between the fishery cooperatives and the large scale retailers through the process industry. 2. The vertical marketing system. \circled1The fishermen's cooperative to be nominated by wholesaler in the terminal market. \circled2 Contracted vertical marketing system. \circled3 Abolition of selling by double auction in the landing and the terminal market. 3. The physical distribution system. \circled1 The need for adoption of cold chain system to connect production directly to consumption. \circled2 The need for more expansion of landing markets and terminal market facilities. Solutions to the problems of the Korean fishery are made possible through effective functioning of cooperative marketing activities of fishery products. The marketing concept of fishermen's cooperative lies in the satisfaction of consumer needs. According to the marketing concept fishermen's cooperative should try to satisfy customer's needs through a coodinated set of activities that allows the organization to achieve its goal. Providing satisfaction to customers is the major trust of the marketing concept. To do this, a business must find out what will satisfy customers. With this information the cooperative sells to the greatest possible number of customers through the most efficient sales and marketing channels. Economic rationality of fishermen's cooperative marketing lies in reduction of marketing cost and elimination of intermediate institutions. Cooperative marketing and direct marketing are both indispensable marketing factors for a new cooperative organization among the manu ways. The cooperation between the fishermen's cooperative and the others cooperative, and vertical marketing system are the most necessary ones. Propulsion of cooperative marketing system could not be successful without the support of the marketing instituion's help. Consequently, successful cooperative marketing ought to lead to the necessity not only for the improvement of marketing organization, but for the application of a new marketing concept in the fishermen's cooperative.

• Korean Journal of Environmental Agriculture
• /
• v.38 no.4
• /
• pp.281-290
• /
• 2019

BACKGROUND: As the demand for strawberries increases, people are paying attention to food safety in strawberry, especially pesticide residues. To remove the pesticides from strawberry, various washing and processing technique in households are additionally required. METHODS AND RESULTS: Strawberries were washed with water, detergent, alcohol, and ultrasonication and processed to strawberry jam. The mean reduction efficiency according to the washing solvent and method was found to be higher in the order of detergent (42.5%) > alcohol (41.7%) > water (41.3%) > ultrasoniation with alcohol (40.2%) > ultrasoniation with water (38.6%) > ultrasoniation with detergent (36.9%), but there was no significant difference among the treatments. The residue levels of pesticides during processing to jam decreased by 11.9-94.4% for etoxazole, fluopyram, procymidone, spiromesifen, and prochloraz, while the other pesticides were concentrated by boiling, or rather increased by 11.8-40.2%. However, when the residue levels were converted to residual amounts in consideration of the change in weight after processing, the residual amounts of the tested pesticides were reduced by 59.8-98.4% during processing. The processing factor (PF) were different for each pesticide, but PFs were < 1 for all washing solvents and methods, and 0.06-1.40 when processed into jam. CONCLUSION: To ensure the consumption of pesticide-free strawberry, the most efficient washing method is to immerse the strawberry in fresh water for few minutes, followed by rinsing them under running water.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.3 no.4
• /
• pp.1-41
• /
• 2008

The Korean semiconductor industry has made a great contribution to growth of Korean economy for the last decades by maintaining a top position in terms of Korean total annual export volume. However, the advanced semiconductor equipment and materials that are used for the production of semiconductor devices still depend on the suppliers from Europe, Japan, and America who have an influential position in the Korean semiconductor industry. The objective of this study is to empirically investigate the attributes determining the extent of autonomy in decision making for the Korean subsidiaries of multinational corporations in the semiconductor industry. This study found there were differences in the extent of autonomy in decision making in terms of the global strategies the multinational corporations pursue. This study surveyed employees at the Korean subsidiaries and joint venture companies of semiconductor multinational corporations and collected 726 survey questionnaires. Several statistical analyses including frequency analysis, reliability analysis, factor analysis, multiple regression analysis and ANOVA were performed using the collected sample data. Based on the analyses, this study found as follows: Firstly, from the factor analysis, this study found Korean subsidiaries faced three sources of uncertainties stemmed from political conditions, competent conditions, demand and supply conditions. The internal resources were characterized by the independencies of production capability, financial capability, marketing capability and human resource management capability. The operational performance was determined by total revenue, net profit and market share growth. Secondly, it was found the uncertainties from political condition and competent condition and the independencies of financial capability and marketing capability partially influenced the extent of autonomy in decision making. The independencies of production capability and human resource management capability significantly influenced the autonomy of decision making in the most areas. It was also found an increase of total revenue, net profit and market share growth partially affected the extent of autonomy in decision making of the Korean subsidiaries. Finally, it was found that the polycentrism of global management by multinational corporations seemed to bring a higher extent of autonomy in decision making than ethnocentrism or geocentrism of global management. Based on the results, this study provided managerial implications regarding the extent of autonomy in decision making for Korean subsidiaries of multinational corporations in order to help management to enhance their business capabilities.