• Bulletin of the Korean Chemical Society
• /
• v.8 no.1
• /
• pp.31-39
• /
• 1987

By using a complete rate constant($k_e$) which treats a solvent (water) as a reactant, and a conventional rate constant($k_c$), which ignores the solvent in describing the rate, the parameters ${\Delta}V^{\neq}_s,\;{\Delta}H^{\neq}_s\;and\;{\Delta}S^{\neq}_s$ were introduced. These quantities represent the volume change, the enthalpy change, and the entropy change accompanying the electrostriction which occurs when solvent molecules condense on the activated complex. The authors measured the rates of the solvolysis of benzoyl chloride in water-acetone mixtures at $15^{\circ}$ to $30^{\circ}C$ and 1 bar to 2500 bars. Applying the authors' theory to the experimental results, the parameters, ${\Delta}V^{\neq}_s,\;{\Delta}H^{\neq}_s\;and\;{\Delta}S^{\neq}_s$ were evaluated, and it was found that they are all negative, indicating that water dipoles condense on the activated complex. They also proposed the following equations: ${\Delta}H^{\neq}_c\;=\;{\Delta}H^{\neq}_e\;+\;{\Delta}H^{\neq}_s\;and\; {\Delta}S^{\neq}_c\;=\;{\Delta}S^{\neq}_e\;+{\Delta}S^{\neq}_s\;,\;where\;{\Delta}H^{\neq}_c\;and\;{\Delta}H^{\neq}_c\;and\;{\Delta}S^{\neq}_s $are the activation enthalpy change and the activation entropy change for the conventional reaction rate, respectively, and ${\Delta}H^{\neq}_e$ and ${\Delta}S^{\neq}_e$ are the corresponding quantities for the complete reaction rate. The authors proposed that for the $SN_1$ type, all the quantities, ${\Delta}V^{\neq}_s,\;{\Delta}S^{\neq}_s\;,{\Delta}H^{\neq}_s\;and\;{\Delta}S^{\neq}_s$ are comparatively large, and for the $SN_2$ type, these quantities are smaller than for the $SN_1$ type, and occasionally the case ${\Delta}S^{\neq}_e$ < 0 occurs. Using these criteria, the authors concluded that at high temperature, high pressure and for a high water content solvent, the SN_1$ type mechanism predominates whereas in the reversed case the $SN_2$M type predominates.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.402-403
• /
• 2009

Accelerated aging tests were conducted under laboratory conditions on two generator stator bars. Electrical stress is applied in No. 1 model stator bar. Electrical and thermal stresses are applied in No. 2 model stator bar. As aging times increased from 0 to 11460h, dissipation factor($tan{\delta}$) test was performed on No. 1 and No.2 model stator bars. The ${\Delta}tan{\delta}$ of No. 1 and No. 2 stator bars increased with increased in aging time.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.279-280
• /
• 2008

Accelerated aging tests were conducted under laboratory conditions on two generator stator bars. Electrical stress is applied in No. 1 model stator bar. Electrical and thermal stresses are applied in No. 2 model stator bar. As aging times increased from 0 to 4780h, diagnostic tests were performed on No. 1 and No. 2 model stator bars. Diagnostic tests included AC current, dissipation factor(tan$\delta$) and partial discharge magnitude. The ${\Delta}tan{\delta}$ and $\Deta$I of No. 1 and No. 2 model stator bars increased with increased in aging time.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.2 s.46
• /
• pp.77-82
• /
• 2007

In this paper, we proposed the image processing techniques for extracting the cracks in a concrete surface crack image and the enhanced Max-Min neural network for recognizing the directions of the extracted cracks. The image processing techniques used are the closing operation or morphological techniques, the Sobel masking for extracting for edges of the cracks, and the iterated binarization for acquiring the binarized image from the crack image. The cracks are extracted from the concrete surface image after applying two times of noise reduction to the binarized image. We proposed the method for automatically recognizing the directions of the cracks with the enhanced Max-Min neural network. Also, we propose an enhanced Max-Min neural network by auto-tuning of learning rate using delta-bar-delta algorithm. The experiments using real concrete crack images showed that the cracks in the concrete crack images were effectively extracted and the enhanced Max-Min neural network was effective in the recognition of direction of the extracted cracks.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.11
• /
• pp.2143-2149
• /
• 2007

Visual Cortex Stimulator is among artificial retina prosthesis for blind man, is the method that stimulate the brain cell directly without processing the information from retina to visual cortex. In this paper, we propose image construction and recognition model that is similar to human visual processing by recognizing the feature data with orientation information, that is, the characteristics of visual cortex. Back propagation algorithm based on Delta-bar delta is used to recognize after extracting image feature by Kirsh edge detector. Various numerical patterns are used to analyze the performance of proposed method. In experiment, the proposed recognition model to extract image characteristics with the orientation of information from retinal cells to visual cortex makes a little difference in a recognition rate but shows that it is not sensitive in a variety of learning rates similar to human vision system.

• Journal of the Korean Chemical Society
• /
• v.39 no.5
• /
• pp.350-355
• /
• 1995

UV spectrophotometric investigation has been carried out on the system of charge-transfer (CT) complex with iodine and tetramethyltin in carbon tetrachloride solvent. The transient CT absorption spectrum can be observed in ${\lambda}_{max}=270nm$ and the subsequent disappearance of CT absorption spectrum was accompained by the cleavage of tetramethyltin with iodine (iododestannylation). From there, the rate constants for the iododestannylation were determined at 10, 20 and $35^{\circ}C$ up to 1200 bar and the reaction rates were increased with increasing temperature and pressure. From these rate constants, the values of the activation parameters (${\Delta}V^{\neq},\;{\Delta}{\beta}^{\neq},\;{\Delta}H^{\neq}\;and\;{\Delta}S^{\neq}$) were obtained and from these values discussed in terms of solvent structure variation of transition state and mechanism. From these results, it was found that the reaction is followed with $S_F2$ mechanism and weakened $S_F2$ mechanism nature by increasing pressure.

• Journal of the Korean Chemical Society
• /
• v.30 no.2
• /
• pp.188-194
• /
• 1986

The rate constants for the solvolysis reactions of p-chlorobenzyl chloride in ethanol-water mixtures were determinded at 30${\circ}\;and\;40{\circ}$C up to 1,600bar. Rates of reaction were increased with increasing temperature and pressure, and decreased with increasing solvent composition of ethanol mole fraction. The plots of ln k against pressure are fitted to a second-order function in P, and values of ${\Delta}V^{\neq}\;and\;${\Delta}{\beta}^{\neq}$ are obtained. The values of ${\Delta}V^{\neq}\;and\;${\Delta}{\beta}^{\neq}$ extremum behavior at about 0.20 mole fraction of ethanol. This behavior is discussed in terms of solvent structure variation. From the relation between the plots of ln k versus the solvent parameter, q ≡ (D-1)/(2D+1), or the logarithmic molar water concentration, In $C_w$, it could be estimated that the reaction proceeds through $S_N1(2)$ mechanism.

• Journal of the Korean Chemical Society
• /
• v.37 no.3
• /
• pp.287-293
• /
• 1993

Ultraviolet spectrophotometric investigation has been carried out on the system of charge-transfer(CT) complex with iodine and tetramethyltin in n-hexane and acetone. From these results, the transient CT absorption spectrum can be observed and the subsequent disappearance of CT absorption spectrum is accompained by the cleavage of tetramethyltin with iodine (iododestannylation). Therefore, the rate constants for the iododestannylation were determined at 10, 25 and 35$^{\circ}C$ up to 1600 bar and the rates of reaction were increased with increasing temperature and pressure. From these rate constants, the values of the activation parameters (${\Delta}V^{\neq}$, ${\Delta}{\beta}^{\neq}$, ${\Delta}H^{\neq}$ and ${\Delta}S^{\neq}$) were obtained and discussed in terms of solvent structure variation of transition state and mechanism from these values. It could postulated that the reaction is followed with S$_F$2 mechanism and weakened S$_F$2 mechanism nature by increasing pressure.

• Journal of Ocean Engineering and Technology
• /
• v.5 no.1
• /
• pp.97-105
• /
• 1991

In this paper, the fatigue strength and the fatigue crack propagation behaviors of the round bar specimens which were spirally built up by welding and subsequently hardened by quenching were investigated. The material used was SF60 which was whdely employed in mechanical components, especially shafts. Fatigue tests were conducted at the fully reversed condition(R=-1) and axial and load control in the room temperature ahd air environment. The experimental results were expressed by both the range of stress intensity factor ($\Delta{K}$) and the effective range of stress intensity factor ($\Delta{K}_{eff}$). It was clarified that applying of quenching after the building up welding process improved the fatigue strength and the gatigue crack propagation property in the low range of $\Delta{K}$ of the built up round bar specimen.

• Journal of Korean Ophthalmic Optics Society
• /
• v.15 no.1
• /
• pp.79-85
• /
• 2010

Purpose: We studied the relationship between subjective and objective deviating angle. Methods: Those who were diagnosed with strabismus among the patients who had no systemic diseases that fifty-one subjects (Male; 21, Female; 30) were measured between seven to sixty three years, evaluated to alternate cover test after AR/K (Canon RK-FI, Japan) and retinoscope measured refractive errors. Objective deviating angle was measured using prism bar; and subjective and objective deviating angles were measured and compared using the synoptophore. Results: For the correlation between subjective and objective deviating angles. The differences were $2.6{\pm}2.5{\Delta}$, between subjective deviating angle measured using synoptophore and objective deviating angles measured using synoptophore were $0.7{\pm}1.4{\Delta}$, the average with each other were $1.7{\pm}1.8{\Delta}$, with all the differences highly significant. Conclusions: We thought not only reduced angle of deviating errors and identified the significance in the correlation between subjective and objective deviating angles but also considered to be useful in determining deviating angle of patient with strabismus.