• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.25 no.2
• /
• pp.87-104
• /
• 1989

Recently, with the tendency of more lightening, high-strength and high-speed in the marine industries such as marine structures, ships and chemical plants, the use of the aluminium Alloy is rapidly enlarge and there occurs much interest in the study of corrosion fatigue crack characteristics. In this paper, the initiation of surface crack and the propagation characteristics on the base metal and weld zone of 5086-H116 Aluminium Alloy Plate which is one of the Al-Mg serious alloy(A5000serious) used most when building the special vessels, were investigated by the plane bending corrosion fatigue under the environments of marine, air and applying cathodic protection. The effects of various specific resistances on the initiation, propagation behavior of corrosion fatigue crack and corrosion fatigue life in the base metal and heat affected zone were examined and its corrosion sensitivity was quantitatively obtained. The effects of corrosion on the crack depth in relation to the uniform surface crack length were also investigated. Also, the structural, mechanical and electro-chemical characteristics of the metal at the weld zone were inspected to verify the reasons of crack propagation behavior in the corrosion fatigue fracture. In addition, the effect of cathodic protection in the fracture surface of weld zone was examined fractographically by Scanning Electron Microscope(S.E.M.). The main results obtained are as follows; (1) The initial corrosion fatigue crack sensitibity under specific resistance of 25Ω.cm% show 2.22 in the base metal and 19.6 in the HEZ, and the sensitivity decreases as specific resistance increases (2) By removing reinforcement of weldment, the initiation and propagation of corrosion crack in the HAZ are delayed, and corrosion fatigue life increases. (3) As specific resistance decreases, the sensitivity difference of corrosion fatigue life in the base metal and HAZ is more susceptible than that of intial corrosion fatigue crack. (4) Experimental constant, m(Paris' rule) in the marine environment is in the range of about 3.69 to 4.26, and as specific resistance increases, thje magnitude of experimental constant, also increases and the effect by corrosion decreases. (5) Comparing surface crack length with crack depth, the crack depth toward the thickness of specimen in air is more deeply propagated than that in corrosion environment. (6) The propagation particulars of corrosion fatigue crack for HAZ under initial stress intensity factor range of $\Delta$k sub(li) =27.2kgf.mm super(-3/2) and stress ratio of R=0 shows the retardative phenomenon of crack propagation by the plastic deformation at crack tip. (7) Number of stress cycles to corrosion fatigue crack initiation of the base metal and the welding heat affected zone are delayed by the cathodic protection under the natural sea water. The cathodic protection effect for corrosion fatigue crack initiation is eminent when the protection potential is -1100 mV(SCE). (8) When the protection potential E=-1100 mV(SCE), the corrosion fatigue crack propagation of welding heat affected zone is more rapid than that of the case without protection, because of the microfissure caused by welding heat cycle.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2003.09b
• /
• pp.105-119
• /
• 2003

일반적인 로봇시스템은 자신이 이동해야 할 목표 지점을 자율적으로 생성할 수 없으므로 어떤 다른 시스템의 정보를 이용하여 주변을 탐색하거나 장애물을 인식하고 식별하여 자신의 제어전략을 수립한다. 그러므로 본 논문에서 제시한 시스템은 초소형 비행체를 이용하여 주위 환경과 자율 이동로봇의 위치 정보를 탐색할 수 있도록 시스템을 구성하였다 이러한 시스템의 성능은 로봇이 위치하고 있는 주위의 불완전한 정보로부터 적절한 결론을 유도해 낼 수 있어야 한다. 그러한 비선형적인 문제는 현재까지도 문제 해결을 위해 많은 연구가 진행되고 있다. 본 연구에서는 자율이동로봇의 행동 환경을 공간상의 제약을 받지 않는 비선형 시스템인 초소형 비행체에 극초단파(UHF16채널) 영상장치를 이용하여 호스트 PC로 전송하고 호스트 PC는 로봇의 현재 위치, 이동해야 할 목표위치, 장애물의 위치와 형태 등을 분석한다. 분석된 결과 파라메타는 RF-Module을 이용해서 로봇에 전송하고, 로봇은 그 데이터를 분석하여 동작하게 된다. 로봇이 오동작 또는 장애물로 인해 정확한 목적지까지 도달하지 못할 때 호스트 PC는 새로운 최단경로를 생성하거나 장애물을 회피 할 새로운 전략을 로봇에게 보내준다. 본 연구에 적용한 알고리즘은 초소형 비행체에서 탐지한 불완전한 영상정보에서도 비교적 신뢰도 놀은 결과를 보이는 A* 알고리즘을 사용하였다 적용한 알고리즘은 실험을 통하여 실시간으로 정보를 처리할 수 있었으며, 자율 이동로봇의 충돌회피나 최단 경로 생성과 같은 문제를 실험을 통하여 그 성능과 타당성을 검토하였다.delta}textitH]$를 도출하였다.rc}C$에서 30 ㎫의 압력으로 1시간동안 행하였다 소결한 시편들은 직사각형 형태로 가공하였으며 표면은 0.5$\mu\textrm{m}$의 다이아몬드 입자로 연마하였다. XRD, SEM 및 TEM을 이용하여 상분석 및 미세조직관찰을 행하였다. 파괴강도는 3중점 굽힘 법으로 (3-point bending test) 측정하였다. 이때 시편 하부의 지지 점간의 거리는 30mm, cross-head 속도는 0.5 mm/min으로 하였고 5개의 시편을 측정하여 평균값을 구하였다.ell/\textrm{cm}^3$, 혼합재료 3은 0.123$\ell/\textrm{cm}^3$, 0.017$\ell/\textrm{cm}^3$, 혼합재료 4는 0.055$\ell/\textrm{cm}^3$, 0.016$\ell/\textrm{cm}^3$, 혼합재료 5는 0.031$\ell/\textrm{cm}^3$, 0.015$\ell/\textrm{cm}^3$, 혼합재료 6은 0.111$\ell/\textrm{cm}^3$, 0.020$\ell/\textrm{cm}^3$로 나타났다. 3. 단일재료의 악취흡착성능 실험결과 암모니아는 코코넛, 소나무수피, 왕겨에서 흡착능력이 우수하게 나타났으며, 황화수소는 펄라이트, 왕겨, 소나무수피에서 다른 재료에 비하여 상대적으로

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.2
• /
• pp.392-398
• /
• 2004

The application of Dongchimi added with Wasabi for the improvement of quality was scientifically explored by reviewing the optimum level and its effect on the physicochemical property of product of fermentation. The final weight percentage of Wasabi in Dongchimi was adjusted to 0, 3, 5, 7 and 9%, per radish, each respectively. Following the fermentation of Dongchimi, the 7% treatment contained the highest pH and the lowest total acidity. The total vitamin C and reducing sugar content increased initially to the certain time of fermentation depending on the level of Wasabi, and the 7% treatment decreased later. The optimum levels of Wasabi in Dongchimi obtained through experiments were 5% and 7% per added radish weight, preferably 7% for fermentation-retarding effect of the product.

• Economic and Environmental Geology
• /
• v.26 no.3
• /
• pp.311-325
• /
• 1993

The Ohto and Tohyun copper mine which are located 4 km southeast of Euiseong, Gyeongsangbukdo, Republic of Korea show various common geologic and mineralogic features. Both copper deposits are of hydrothermal-vein types, and associated with fracture system developed during formation of the Geumseong-san caldera in late Cretaceous age. According to structures and mineral assemblages, the mineralization processes have progressed in four stages: three hypogene mineralization stages and one supergene stage. Three hypogene stages are 1) stage I forming $N5{\sim}20^{\circ}E$ veins in the Ohto mine, 2) stage II building $N5^{\circ}W{\sim}N5^{\circ}E$ veins in the Tohyun mine, and 3) stage ill bringing $N80^{\circ}E$ veins which crosscut veins of the stage II. The vein ores consist mainly of pyrite, arsenopyrite, galena and chalcopyrite, minor or trace amounts of magnetite, hematite, pyrrhotite, stannite, bournonite, boulangerite, stibnite, galenobismutite, native bismuth, marcasite, geothite and malachite. The main gangue minerals are quartz and calcite. Wallrock is altered by sericitization, chloritization, pyritization, carbonitization and argillization. Arsenic and copper contents in arsenopyrite increase from stage I to stage III (from 31.28 to 33043 atom.% As) and (from 0.04 to 0040 atom.% Co). Going from stage I to stage III Fe and Mn contents in sphalerite decreases from 12.56 to 0.44 wt.% and from 0.24 to 0.01 wt.%, respectively. The compositional data of arsenopyrite in the early stage I indicate a temperature of $420{\sim}365^{\circ}C$ and sulfur fugacity of $10^{-6.5}{\sim}10^{-8.3}$ atm. Chalcopyrite and pyrrhotite assemblage suggest that Middle stage I was deposited at below $334^{\circ}C$. The compositional data of arsenopyrite in early stage II suggest a temperature range of $425{\sim}390^{\circ}C$ and sulfur fugacity codition of $10^{-6.4}{\sim}10^{-7.3}$ atm. Based on fluid inclusion the Middle stage II was regarded as to be deposited at $420{\sim}337^{\circ}C$ (Chi et al., 1989). Referring composition of sphalerite and stannite middle-late stage II seem to be deposited around $246^{\circ}C$ and $10^{-16.5}$ atm. sulfur fugacity. The ${\delta}^{34}S$ values of sulfide minerals in the Stage I, II, III range from 4.9 to 7.6%0 and indicate igneous ore fluid origin. Based on differences in mineral assemblages, chemical composition and chemical environments of Ohto and Tohyun mine its mineralization are considered to be formed at diffent mineralization ages and by different ore fluids.

• Food Science of Animal Resources
• /
• v.33 no.5
• /
• pp.664-671
• /
• 2013

The objective of this study was to investigate the effect of high pressure treatment and type of binding agents on the quality characteristics of restructured pork. For binding agents, 2% (w/w) isolated soy protein (SP), 0.5% (w/w) wheat flour (WF) and 0.5% (w/w) ${\kappa}$-carrageenan (KC) were incorporated into meat batter with or without 0.5% (w/w) glucono-${\delta}$-lactone (GdL). The restructured pork was pressurized at varying pressure levels (0.1-450 MPa) for 3 min under ambient temperature and thermal treated at $75^{\circ}C$ for 30 min. As quality parameters of restructured pork, pH, water binding properties, instrumental color and texture profile analysis were determined and compared with control (C, no binder). For type of binders, SP exhibited the best water binding properties, however, the impact on textural properties were lesser than KC and WF. The addition of GdL decreased the pH of restructured pork down to 0.4 unit, while high pressure processing prevented the moisture loss caused from pH decrease by GdL. In particular, meat restructuring efficiency of SP as a binder improved under the presence of GdL. Therefore, the present study demonstrated the potential advantages of low amount of GdL (0.5%, w/w) combined with protein based binder (SP) and high pressure processing in restructuring meat particles.

• Korean Journal of Materials Research
• /
• v.4 no.6
• /
• pp.681-686
• /
• 1994

Microwave Detector Using $YBa_{2}Cu_{3}O_{7-x}$, Grain Boundary Junction $YBa_{2}Cu_{3}O_{7-x}$ superconductor thin films were deposited on $LaAIO_{3}$ (100) single crystal substrates using a metal organic chemical vapor deposition (MOCVD) method. These films showed the critical temperature of about 9OK and critical current density of over $10^5/A \textrm{cm}^2$at 77K. These films showed granular structure with 0.5~1.5$\mu \textrm{m}$ grains. Bridge-type junctions, 6$\mu \textrm{m}$ in width and 6pm in length, were fabricated using the photolithography and the Ar ion milling techniques. Current-voltage (I-V) characteristics of these junctions with the microwave irradiation at 77K were studied. The critical current densities decreased as the irradiated microwave power increased. When microwaves were irradiated on the bridge at 77K. the I-V charateristics showed constant voltage stcp(Shapiro steps) at $\Delta$=nho/2e.

• Journal of Oral Medicine and Pain
• /
• v.35 no.4
• /
• pp.293-298
• /
• 2010

The goal of this study is to contribute to the clinical application by making a quantitative nerve current perception threshold(CPT) examination for the evaluation of numbness that could be occurred after dental surgery, Measurement of CPTs at each different frequencies(2000 Hz, 250 Hz, and 5 Hz) were performed to trigeminal nerve main branch(mandibular division) of 29 patients with dental surgery on mandibular area and 25 normal subjects. There were significant differences in CPTs between patient group and control group.(p<0.05) But, there were no significant between patient male and female in both patient and control group except 2000 Hz was significantly high in the control female.

• Korean Security Journal
• /
• no.13
• /
• pp.507-528
• /
• 2007

June 2006, five korean oil workers, three who worked for Daewoo and two for Korea Gas, released after being held hostage by separatist militants in Nigeria. The kidnapping was happened in the Niger Delta where armed separatists are demanding a larger share in oil revenues and compensation for environmental destruction due to oil exploration. Seven months later, nine Korean pipeline workers of Daewoo together with a Nigerian were kidnapped again and safely released thanks to the efforts of the company and the Korean government. These two kidnapping incidents have shown that companies engaged in the overseas business are not safe any more from the terrorist attacks and has given an invaluable lesson that the company having an intention to go abroad for business should take all possible anti and counter-measures against terrorism. The main purpose of this study is to suggest a guideline for the establishment of counter-terrorism and security strategy against terrorist attacks on the private companies at the overseas. In order to foster a better understanding of the problem, a brief history of terrorism is presented in the first part. In addition, this study analyses and describes the variations of terrorist attacks against private companies together with the terrorism related environment of Korea. Based on the outcome of the study, this paper takes a global view and perspectives of terrorist attacks against private companies and suggests consideration for the future.

• The Korean Journal of Petroleum Geology
• /
• v.11 no.1 s.12
• /
• pp.18-26
• /
• 2005

An occurrence of inclined heterolithic stratification (IHS) is described from a tidal point bar in a 40-m-deep distributary of the macrotidai, Han River delta, Korea. The channel bank demonstrates a convex-upward profile with intermittent presence or wave-formed scarps and terraces near the low-water level. The vertical succession of IHS is approximately 25 m thick and dips into the channel with angles reaching up to $14^{\circ}C$. The IHS overlies 15 m of trough cross-bedded sand deposited in the channel bottom. Even though the channel as a whole is ebb dominated, the preserved cross bedding is predominantly flood directed because the mutually evasive nature of the ebb and flood currents causes the point bar surface to be flood dominated. The IHS itself consists of inter-stratified fine sand, sandy silt, and silt with an fining-upward textural trend. Seasonal discharge variations of the Han River are not obvious in the deposits, because tile large size, distal location, and energetic tidal environment of the studied channel reduces the impart of river-stage fluctuations.

• Korean Journal of Food Science and Technology
• /
• v.36 no.1
• /
• pp.97-104
• /
• 2004

Effects of sub-materials such as, ethanol, mustard, and chitosan, on enzymatic, microbial and physicochemical characteristics of kochujang were investigated during fermentation. Activity of ${\alpha}$-amylase was low in chitosan-added kochujang, whereas those of ${\beta}$-amylase and pretense did not show any remarkable difference. Viable cells of yeast and bacteria decreased in sub-material-added kochujang during fermentation, with yeast counts decreasing more rapidly in ethanol- and mustard-added kochujang than that with chitosan. Consistency of kochujang decreased during fermentation, with the highest consistency observed in ethanol-added kochujang. Oxidation-reduction potential was low in chitosan-added kochujang. Water activity of all kochujang groups decreased during fermentation with the lowest in ethanol-added kochujang. Hunter L-, a-, and b-values of chitosan-added kochujang were higher than other groups, whereas increase in total color difference of low-salt without sub-material group was lowest pH of kochujang was the highest in ethanol-added kochujang, whereas titratable acidity increased remarkably in chitosan-added group. Total sugar and reducing sugar contents of kochujang were high in ethanol-and mustard-added groups, whereas ethanol production decreased remarkably in mustard-added kochujang. Amino nitrogen content was highest in low-salt without sub-material kochujang during late aging period. Ammonia nitrogen content was lower in mustard-added kochujang. After 12 weeks of fermentation, ethanol-added kochujang was more acceptable than mustard-and chitosan-added groups in taste, color, and overall acceptabilities.