• 대한환경공학회지
• /
• 제36권5호
• /
• pp.367-377
• /
• 2014

국내 최대 상수원인 팔당호는 하천형 호소로 분류되며, 팔당호 수질은 외부오염원의 영향이 크다. 이에 본 연구에서는 팔당호 상류지역의 오염원 분포와 오염물질 유출특성을 분석하여 BOD와 TP 관리를 위한 중점관리 오염원을 선정하고자 하였다. 이를 위해 11개 단위유역에 대한 오염원별 발생부하량과 배출부하량을 조사하고, 74개 소하천의 수질 유량 측정결과를 이용하여 유달부하량과 유역면적당 유달부하 밀도를 분석하였다. 오염원별 BOD, TP 발생부하량과 배출부하량, 유달부하량을 분석한 결과, BOD 발생부하량은 축산계가 66.0%로 가장 높은 비율을 차지하였고, BOD 배출부하량은 생활계가 42.7%를 차지하였으며, BOD 유달부하량은 축산계와 생활계가 각각 36.4%, 34.3%를 차지하는 것으로 나타났다. TP 발생부하량과 배출부하량, 유달부하량 모두 축산계에서 가장 높은 비율을 차지하였으며, 각각 82.5%, 44.4%, 46.7%로 나타났다. 또한 BOD 유달부하밀도는 인구밀도가 높은 경안천 유역이 $14.6kg/km^2/d$으로 가장 높았고, TP 유달부하밀도는 가축사육두수가 많은 청미천 유역이 $1.23kg/km^2/d$이 가장 높게 나타났다. 이러한 연구결과를 통해 팔당호 수질개선을 위해서는 생활오수와 가축분뇨를 중심으로 오염원관리가 필요하며 경안천 유역은 생활오수에 대한 관리가 필요하고 남한강 유역, 특히 청미천 유역은 가축분뇨에 대한 관리가 필요한 것으로 판단되었다.

• 한국농공학회논문집
• /
• 제52권4호
• /
• pp.19-26
• /
• 2010

To provide the basic information for the water quality management of the Sumjin River Basin, delivery ratios for flow duration were studied. Using the day-interval data set of discharge and water quality observed from the Chooryeong-cheon watershed, the flow-duration and discharge-load relation curves for the watershed were established, then the load-duration curve was constructed. Delivery ratios for flow duration were also developed. Delivery ratios showed wide variation according to flow conditions. In general, delivery ratio of high flow condition showed higher value reflecting nonpoint source pollution contribution from the forest dominating watershed. To resolve this problem, a regression model explaining the relation between flow rate and delivery ratio was suggested. The delivery ratios for different flow regime could be used for pollutant load estimation and TMDL (Total maximum daily load) development.

• 한국물환경학회지
• /
• 제32권4호
• /
• pp.375-383
• /
• 2016

Total Pollution Load Control (TPLC) calculates and manages the allowable pollutant load that is discharged from the watershed, which can meet the water quality target. Delivery Ratio (DR) is generally used for predicting the variation of pollutant mass balance between the pollutants discharged from the watershed and a certain point in the stream, and it is very important for estimation of accurate allowable pollutant load. The concept of DR in TPLC is different from prevalent DR, because DR in TPLC includes both the discharge of pollutants from the watershed and the delivery mechanism. Therefore, DR in TPLC should be estimated by using a proper and unified methodology. The appropriate method and equation for estimation of DR in TPLC was developed through the review of various methodologies, and the applicability of the equation was evaluated in a study area (Geumho A). Determination coefficients (R²) of regression were shown to be relatively high (BOD 0.71~0.87, T-N 0.86~0.90, T-P 0.62~0.69). Applicability of the developed methodology and equations was evaluated as appropriate for TPLC, and it is suggested.

• 한국농공학회논문집
• /
• 제61권1호
• /
• pp.9-20
• /
• 2019

The primary objective of this study was to analyze the delivery ratio using Hydrological Simulation Program - Fortran (HSPF) in Okdong-cheon watershed. Model parameters related to hydrology and water quality were calibrated and validated by comparing model predictions with the 8-day interval filed data collected for ten years from the Korea Ministry of Environment. The results indicated that hydrology and water quality parameters appeared to be reasonably comparable to the field data. The pollutant delivery loads of the watershed in 2015 were simulated using the HSPF model. The delivery ratios of each subwatershed were also estimated by the simple ratio calculation of pollutant discharge load and pollutant delivery load. Coefficients of the regression equation between the delivery ratio and specific discharge were also computed using the delivery ratio. Based on the results, multiple regression analysis was performed using the discharge and the physical characteristics of the subwatershed such as the area. The equation of delivery ratio derived in this study is only for the Okdong-cheon watershed, so the larger studies are needed to apply the findings to other watersheds.

• 한국환경과학회지
• /
• 제21권10호
• /
• pp.1235-1244
• /
• 2012

The objective of this study is to evaluate Flow-Pollutant load delivery ratio equations developed from rural watershed on main subwatersheds within Juam Lake. Two regression equations for BOD and three equations for T-P were evaluated on Bosung cheon, Dongbok cheon, Songgwang cheon, Naenam cheon, and Sinpyeon cheon. The results show that estimation of BOD delivery ratio using flow-delivery equation is reliable when relative composition of discharge load of pollutant sources of a watershed is similar to those of watershed where the equation developed. On the other hand, application of regression equation for T-P was feasible when the landuse pattern and relative composition of discharge load of pollutant sources of a watershed is similar to those of watershed where the equation developed.

• 한국물환경학회지
• /
• 제25권4호
• /
• pp.580-588
• /
• 2009

In this study daily flow rates and delivered pollutant loads of Nakdong river basin are simulated with modified TANK model and minimum variance unbiased estimator. Based on the simulation results, flow duration curves, load duration curves, and delivery ratio duration curves have been established. Then GIS analysis is performed to obtain several hydrological geomorphic characteristics such as watershed area, stream length, watershed slope and runoff curve number. Finally, multiple regression analysis is carried out to estimate empirical equations for pollutants delivery ratio. The results show that there is positive relation between the flow rates and delivery ratios, and the proposed empirical formulas for delivery ratio can predict well river pollutant loads.

• 한국농공학회논문집
• /
• 제51권6호
• /
• pp.25-31
• /
• 2009

In this study, pollutant loads delivery ratio by flow duration in Hwangryoung A watershed was estimated. The delivery ratio was estimated with measured data by Ministry of Environment(MOE) and the regression equation based on geomorphic parameters. Eight day interval flow data measured by the MOE were converted to daily flow to calculate daily load and flow duration curve by correlating data of neighboring station which has daily flow data. Regression equation developed by previous study was tested to study watershed and found to be satisfactory. The delivery ratios estimated by two methods were compared. For the case of Biochemical oxygen demand(BOD), the delivery ratios of low flow condition were 7.6 and 15.5% by measured and regression equation, respectively. Also, the delivery ratios of Total phosphorus(T-P) for normal flow condition were 13.3 and 6.3% by measured and regression equation, respectively.

• 한국습지학회지
• /
• 제6권3호
• /
• pp.47-54
• /
• 2004

본 연구에서는 수리 수문학적인 이론을 근거로 수질모델링을 위한 유달 오염부하량 산정방법을 제안하고자 한다. 본 연구에서 제안하는 방법은 격자기반으로 구성되어 있으며, 최대 경사 방향으로 일어나는 지표면 유출을 추적함으로써 유달부하량을 계산하게 된다. 또한 GIS 및 DEM 자료를 이용함으로써 공간적으로 분포된 배출 오염부하량, 지형, 경사, 토양특성, 토지이용 등을 고려할 수 있다. 이를 통하여 수질에 영향을 미치는 다양한 토지이용방법 및 유역관리방식의 대안에 대한 평가가 가능할 것으로 기대된다.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2005년도 학술발표논문집
• /
• pp.534-539
• /
• 2005

The purpose of this study is the introduction of pollutant loads's estimation into Saemangeum watershed area with M.E.'s guidebook for TMDL and GIS tool. To estimate reliable pollutants loads, it is necessary to think about characteristic of removal, discharge and runoff as time series. In this study, it was calculated for generation loads which be came from pollutant source, discharge loads which be reduced in the treatment facilities and delivery loads which be considered the self purification parameter and delivery distance. To assess the delivery distance handily, it was particularly estimated using Arc-GIS. It was met with good results that delivery loads of BOD, T-N and T-P was reflected to seasonal precipitation. Lastly to verify the estimated pollutant loads, HSPF developed by USEPA was applied to it. It was showed a relativity of observed to simulated data for flow, Temperature, DO, BOD, $NO_3^--N$ TN and TP. Consequantly, this delivery loads can make full use of model input data for prediction of pollutant loads.

• 대한환경공학회지
• /
• 제32권2호
• /
• pp.175-184
• /
• 2010

본 연구에서는 유역모형인 BASINS/HSPF와 연계하여 비점유달부하량을 유황별(갈수기, 저수기, 평수기 등)로 산정하는 방법을 개발하고, 이를 전남지역에 위치한 동복천 유역에 적용하여 그 효용성을 평가하였다. 동복천 유역에 대한 BASINS/HSPF 모형의 보정 검증결과는 유출유량, BOD 및 T-P의 신뢰도지수가 각각 1.59, 1.41, 1.28로서 실측값과 예측값의 유사성은 높게 나타났다. 이와 같이 구축된 BASINS/HSPF 모형을 사용하여 동복천 유역의 갈수기, 저수기, 평수기에 대한 BOD와 T-P 비점유달부하량을 각각 구하면, 연간 일평균 비점배출부하량과 대비하여 0.36과 1.09, 0.82와 2.19, 6.02와 16.90이였다. 이러한 결과는 비점유달부하량을 유황별로 산정하여 서로 다르게 반영할 필요성이 있음을 보여주고 있으며, 이러한 경우에 본 연구에서 개발한 유황별 비점오염유달부하량 산정방법은 유용하게 사용될 수 있을 것이다.