• Journal of Yeungnam Medical Science
• /
• v.6 no.2
• /
• pp.47-55
• /
• 1989

High frequency ventilation (HFV) is a new ventilatory technique that uses very small tidal volume(less than the anatomic dead space) and high frequency, and classified 4 distinct types according to frequency and mode of gas delivery. The mechanism of gas transport of high frequency oscillation ventilation(HFOV) is somewhat different to other types of HFV. To evaluate the determinants of $PaCO_2$ in HFOV, a study was done with a HFOV on 9 cats, and the results are : 1) $PaCO_2$ was not correlated with frequency at the constant stroke volume(6 voltage) and bias flow (6L/minutes). 2) $PaCO_2$ was correlated with stroke volume but not with bias flow under the constant frequency(15Hz/min) and bias flow(3 to 6L/min). From above results, the main determinant of $PaCO_2$ on artificial ventilation with HFOV was stroke volume, but further study between flow, the site of delivery to the airway and humidification of bias flow and $CO_2$ elimination is required in future research.

• Progress in Medical Physics
• /
• v.29 no.2
• /
• pp.59-65
• /
• 2018

This paper describes the clinical use of the dose verification of multileaf collimator (MLC)-based CyberKnife plans by combining the Octavius 1000SRS detector and water-equivalent RW3 slab phantom. The slab phantom consists of 14 plates, each with a thickness of 10 mm. One plate was modified to support tracking by inserting 14 custom-made fiducials on surface holes positioned at the outer region of $10{\times}10cm^2$. The fiducial-inserted plate was placed on the 1000SRS detector and three plates were additionally stacked up to build the reference depth. Below the detector, 10 plates were placed to avoid longer delivery times caused by proximity detection program alerts. The cross-calibration factor prior to phantom delivery was obtained by performing with 200 monitor units (MU) on the field size of $95{\times}92.5mm^2$. After irradiation, the measured dose distribution of the coronal plane was compared with the dose distribution calculated by the MultiPlan treatment planning system. The results were assessed by comparing the absolute dose at the center point of 1000SRS and the 3-D Gamma (${\gamma}$) index using 220 patient-specific quality assurance (QA). The discrepancy between measured and calculated doses at the center point of 1000SRS detector ranged from -3.9% to 8.2%. In the dosimetric comparison using 3-D ${\gamma}$-function (3%/3 mm criteria), the mean passing rates with ${\gamma}$-parameter ${\leq}1$ were $97.4%{\pm}2.4%$. The combination of the 1000SRS detector and RW3 slab phantom can be utilized for dosimetry validation of patient-specific QA in the CyberKnife MLC system, which made it possible to measure absolute dose distributions regardless of tracking mode.

• Korean Journal of Construction Engineering and Management
• /
• v.13 no.3
• /
• pp.14-24
• /
• 2012

Recently, a delivery system has been rapidly changed in the global construction market. Also, construction projects are becoming bigger and more technology-intensive. A lot of projects have been delivered by Design-Build(DB) System; from the standpoint of cost, approximately 40% of delivered constructions by a Public Procurement Service were DB in 2009. Nevertheless, the achievement has not surpassed our expectations on management of the project cost. On the characteristic of DB, the reasons why that happens are that projects contract have been signed after the Design Development Stage; the insufficient review about new technology and up-to-date construction methods; a lack of discussion in process of design. Those reasons cause a risk of increasing Cost of the projects. In order to solve these problems, it is desirable to find Cost-increasing factors in promoting the projects and select on the order of priority for Risk-Factor with careful management. Therefore, this study analyzed the weight of each phase of the project on the authority of properties of DB project, and identified Risk-factors which is increasing the cost on the aspect of project management. Based on this analysis, the impact assessment of Risk-factor is evaluated through the Failure Mode and Effect Analysis(FMEA).

• Journal of KIISE:Software and Applications
• /
• v.33 no.7
• /
• pp.605-614
• /
• 2006

The success of a software development project can be determined by the use of QCD. And as a software's size and complexity increase, the importance of early quality assurance rises. Therefore, more effort should be given to prevention, as opposed to correction. In order to provide a framework for the prevention of defects, defect detection activities such as peer review and testing, along with analysis of previous defects, is required. This entails a systematization and use of quality data from previous development efforts. FMEA, which is utilized for system safety assurance, can be applied as a means of software defect prevention. SW-FMEA (Software Failure Mode Effect Analysis) attempts to prevent defects by predicting likely defects. Presently, it has been applied to requirement analysis and design. SW-FMEA utilizes measured data from development activities, and can be used for defect prevention on both the development and management sides, for example, in planning, analysis, design, peer reviews, testing, risk management, and so forth. This research discusses about related methodology and proposes defect prevention model based on SW-FMEA. Proposed model is extended SW-FMEA that focuses on system analysis and design. The model not only supports verification and validation effectively, but is useful for reducing defect detection.

• Journal of Service Research and Studies
• /
• v.14 no.1
• /
• pp.1-12
• /
• 2024

As the service robot market grows among the food technology industry, the quality of robot service that affects consumer behavioral intentions in the restaurant industry has become important. Serving robots, which are common in restaurants, reduce employee work through order and delivery, but because they do not respond to service failures, they increase customer dissatisfaction as well as increase employee work. In order to improve the quality of service beyond the simple function of receiving and serving orders, functions of recovery effort, fairness, empathy, responsiveness, and certainty of the process after service failure, such as serving employees, are also required. Accordingly, we assumed the type of failure of restaurant serving service as two internal and external factors, and developed a serving robot with a vocational ethics module to respond with a professional ethical attitude when the restaurant serving service fails. At this time, the expression and action of the serving robot were developed by adding a failure mode reflecting failure recovery efforts and empathy to the normal service mode. And by recruiting college students, we tested whether the service robot's response to two types of service failures had a significant effect on evaluating the robot. Participants responded that they were more uncomfortable with service failures caused by other customers' mistakes than robot mistakes, and that the serving robot's professional ethical empathy and response were appropriate. In addition, unlike the robot's favorability, the evaluation of the safety of the robot had a significant difference depending on whether or not a professional ethical empathy module was installed. A professional ethical empathy response module for natural service failure recovery using generative artificial intelligence should be developed and mounted, and the domestic serving robot industry and market are expected to grow more rapidly if the Korean serving robot certification system is introduced.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.1
• /
• pp.177-182
• /
• 2014

In this paper, we propose an energy efficient sink node based MAC protocol for Wireless Sensor Networks (WSNs). The proposed sink node-based MAC (SB-MAC) protocol uses a RB(rapid beacon) frame to save sender's energy consumption and to reduce transmission delay. The RB frame is a modified IEEE 802.15.4 beacon frame. The RB frame contains the length of the sender nodes data. Using this information other nodes except sender and receiver nodes can be stay sleep mode long time to reduce energy consumption. Results have shown that the SB-MAC protocol outperformed other protocols like X-MAC and RI-MAC in terms of packet delivery delay and energy consumption. The SB-MAC protocol is especially energy efficient for the networks with one sink node and many senders.

• The KIPS Transactions:PartA
• /
• v.11A no.7 s.91
• /
• pp.547-554
• /
• 2004

To play back CM (Continuous Media) in online mode, the multimedia system Is required to have a real-time disk scheduling scheme that can efficiently fulfill the strict temporal constraints of serviced CM streams to prevent hiccups. In general, such disk scheduling is performed based on the concept of periodic prefetching since a CM stream has a rather long Playback time. In this paper, we also propose a periodic prefetching scheme that runs by using real-time disk channels, called on-time delivery channels. Since the channels are generated from the bulk-SCAN algorithm and they can be allocated in a very flexible manner based on the EDF (earliest-deadline-first) algorithm, the proposed scheme provides a better Performance in terms of I/O throughput and the average response time, as well as hiccup-free playback of concurrent CM streams. To show that the proposed scheme outperforms other methods, we give some simulation results.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.49
• /
• pp.3-41
• /
• 2011

In this article, the author have studied on main revisions and some recommendations of the Incoterms(R) 2010. Main revisions are as belows. 1. Two new Incoterms rules -DAT and DAP- have replaced the Incoterms 2000 rules DAF, DES, DEQ and DDU. 2. New classification of the Incoterms(R) 2010 are adopted. First class is Rules for any mode or modes of transport(EXW, FCA, CPT, CIP, DAT, DAP and DDP belong to this class.) and second class is rules for sea and inland waterway transport(FAS, FOB, CFR and CIF belong to this class.). 3. Incoterms(R) 2010 rules formally recognizes that they are available for application to both international and domestic sale contracts. 4. The Guidance Notes and Introduction are not part of the actual Incoterms(R) 2010 rules. 5. Under the FOB, CFR and CIF, all mention of the ship's rail as the point of delivery has been omitted in preference for the goods being delivered when they are "on board" the vessel. 6. Incoterms(R) 2010 rules include the obligation to 'procure goods shipped' as an alternative to the obligation to ship goods in the relevant Incoterms rules. 7. Incoterms(R) 2010 rules give electronic means of communication the same effect as paper communication. 8. Incoterms(R) 2010 rules have allocated obligations between the buyer and seller to obtain or to render assistance in obtaining security-related clearances. such as chain-of custody information. Some recommendations are as belows. 1. The parties must incorporate the Incoterms(R) 2010 rules into their contract of sale. 2. The parties must choose the appropriate Incoterms(R) 2010 rules. 3. Specify the place or port as precisely as possible in their contract of sale. 4. Remember that Incoterms(R) 2010 rules do not give the parties a complete contract of sale. 5. Incoterms(R) 2010 rules do not prohibit alteration of Incoterms rule, but there are dangers in so doings. In order to avoid any unwelcome surprises, the parties would need to make the intended effect of such alterations extremely clear in their contract.

• Journal of Chest Surgery
• /
• v.20 no.4
• /
• pp.643-654
• /
• 1987

The effect of prostacyclin[PGI, ] on myocardial preservation during global ischemia was studied in the isolating working rabbit heart model. Forty hearts underwent a 15 minute period of retrograde nonworking perfusion with Krebs-Henseleit buffer solution [37*C] and were switched over to the working mode for 15 minutes. After baseline measurement of heart rate, peak aortic pressure, aortic flow, and coronary flow, all hearts were subjected to 60 minutes of ischemic arrest at 10*C induced with St. Thomas Hospital cardioplegic solution: Group I had single dose cardioplegia, Croup II double dose, Croup III oxygenated double dose, and Group IV single dose with PCI, infusion [10ng/min./gm heart weight]. Hearts were then revived with 15 minute period of nonworking reperfusion at normothermia, followed by 30 minutes of working perfusion. Repeat measurements of cardiac function were obtained and expressed as a percent of the preischemic baseline values. Oxygen content of arterial perfusate and coronary effluent was measured by designed time interval. Leakage of creatine kinase was determined during post-ischemic reperfusion period. Finally wet hearts were weighed and placed in 120*C oven for 36 hours for measurement of dry weight. In the PGI, treated group [IV], heart rate increased consistently throughout the period of reperfusion from 100*5.0% [p<0.001] to 107*6.2% [p<0.001]. The percent recovery of aortic flow showed 95*5.7% [p<0.001] at the first 3 minute and full recovery through the subsequent time. Coronary flow was augmented significantly in the 3 minute [96*6.2%, p<0.001] and then sustained above baseline values. Among the Croup I, II, and III, all hemodynamic values were significantly below preischemic levels. PGI2 relatively increased oxygen delivery [1.22*0.19ml/min, p<0.001] and myocardial oxygen consumption [0.90*0.13ml/min, p<0.001] during reperfusion period. Leakage of creatine kinase in the PGI2 group was 9.3*1.58IU/15min [p<0.001]. This was significantly lower than Group I [33.0*2.68 IU/15min]. The water content of PCI2 treated hearts [81*0.9%, p<0.001] was also lower than the other groups.

• Journal of Dairy Science and Biotechnology
• /
• v.27 no.2
• /
• pp.1-6
• /
• 2009

Probiotic bacteria have been administered to neonates to serve as maturational stimuli for the developing gut and intestinal immune system, establish and develop the intestinal microbiota, and mediate host-microbe interactions; further, these bacteria have shown beneficial effects In the treatment and reduction of the risk of infectious diseases, necrotizing enterocolitis, and atopic disease. An LAB isolation project to identify effective lactic acid bacteria for Korean people is in progress. The average total counts of lactic acid bacteria, lactobacilli, bifidobacteria, and coliforms in the fecal samples from 2 provinces were estimated as 8.31, 5.98, 8.13, and 3.01 CFU/g. Additional samples from other provinces will be analyzed to examine the changes in the lactic bacterial counts according to the area, sex of the neonate, mode of delivery, and type of feeding. A database containing the 16S rDNA sequences and the ribosomal protein profile of all the lactic acid bacteria isolated from fecal samples will be constructed. For the effective use of probiotics, a number of clinical studies are needed to formulate guidelines for strain, subject, purpose, and dose.