• Journal of Korean Society on Water Environment
• /
• v.23 no.4
• /
• pp.518-526
• /
• 2007

There have been serious soil erosion and water pollution problems caused by highland agriculture practices at Doam-dam watershed. Especially agricultural activities, chemical and organic fertilizer and pesticide applications, soil reconditioning to maintain soil fertility are known as primary causes of soil erosion and water qaulity degradation in the receiving water bodies. Among these, soil reconditioning can accelerate soil erosion rates. To develop soil erosion prevention practices, it is necessary to estimate the soil erosion from the watershed. Thus, the Universal Soil Loss Equation (USLE) model has been developed and utilized to assess soil erosion. However, the USLE model cannot be used at watershed scale because it does not consider sediment delivery ratio (SDR) for watershed application. For this reason, the Sediment Assessment Tool for Effective Erosion Control (SA TEEC) was developed to assess the sediment yield at any point in the watershed. The USLE-based SA TEEC system can estimate the SDR using area-based SDR and slope-based SDR module. In this study, the SATEEC system was used to estimate soil erosion and sediment yield at the Doam-dam watershed using the soil properties from reconditioned agricultural fields. Based on the soil sampling and analysis, the US LE K factor was calculated and used in the SA TEEC system to analyze the possible errors of previous USLE application studies using soil properties from the digital soil map, and compared with that using soil properties obtained in this study. The estimated soil erosion at the Doam-dam watershed without using soil properties obtained in the soil sampling and analysis is 1,791,400 ton/year (123 ton/ha/year), while the soil erosion amount is 2,429,900 ton/year (166.8 ton/ha/year) with the use of soil properties from the soil sampling and analysis. There is 35 % increase in estimated soil erosion and sediment yield with the use of soil properties from soil reconditioned agricultural fields. Since significant amount of soil erosion are known to be occurring from the agricultural fields, the soil erosion and sediment yield from only agricultural fields was assessed. The soil erosion rate is 45.9 ton/ha/year without considering soil properties from soil reconditioned agricultural fields, while 105.3 ton/ha/year after considering soil properties obtained in this study, increased in 129%. This study shows that it is very important to use correct soil properties to assess soil erosion and sediment yield simulation. It is recommended that further studies are needed to develop environment friendly soil reconditioning method should be developed and implemented to decrease the speed of soil erosion rates and water quality degradation.

• Journal of the Institute of Convergence Signal Processing
• /
• v.21 no.2
• /
• pp.61-66
• /
• 2020

Recently, a variety of electric anesthetics devices have been developed and used in clinical practice to reduce the fatigue of the operator during local anesthesia for dental procedures and to compensate for the disadvantages of manual anesthesia device. In this electric anesthesia injection device, the accurate and constant delivery of pressure for drug infusion is a very important performance factor. In order to evaluate the accuracy of the transfer pressure, a small pressure gauge using a load cell is often used, but since the elastic body inside the load cell may not be able to accommodate a sufficient displacement, an error may occur when evaluating pressure performance. For these reasons, in this study, we proposed and evaluated a silicon-chrome steel (Si-Cr steel) spring jig that can accommodate relatively large displacements that can be used when evaluating the performance of a pressure-controlled pressure application device using a load cell type pressure gauge. As a result of the pressure transmissibility test and repeated measurement results using a commercial dental anesthesia injection device, a more stable result was obtained when using a spring jig, and it was confirmed that the frequency of abnormally high measurement was reduced.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.5
• /
• pp.497-502
• /
• 2022

Information delivery among young generation has a distinct tendency to prefer visual to text as means of information distribution and sharing recently, and it is natural to distribute information through Youtube or one-man broadcasting on Internet. That is, young generation usually get their information through this kind of distribution procedure. Many young generation are also drastic and more aggressive for decorating themselves very uniquely. It tends to create personal characteristics freely through drastic expression and attempt of face makeup, hair styling and fashion coordination without distinction of sex. Especially, face makeup becomes an object of major concern among males nowadays, and female of course, then it is the major means to express their personality. In this study, to meet the demands of the times, we design and implement the intellectual smart mirror application that efficiently retrieves and recommends the related videos among Youtube or one-man broadcastings produced by famous professional makeup artists to implement the face makeup congruous with our face shape, hair color & style, skin tone, fashion color & style in order to create the face makeup that represent our characteristics. We also introduce the AI technique to provide optimal solution based on the learning of user's search patterns and facial features, and finally provide the detailed makeup face images to give the chance to get the makeup skill stage by stage.

• Radiation Oncology Journal
• /
• v.24 no.3
• /
• pp.185-191
• /
• 2006

[ $\underline{Purpose}$ ]: Standardization quality assurance (QA) program of CyberKnife for suitable circumstances in Korea has not been established. In this research, we investigated the development of QA program for CyberKnife and evaluation of the feasibility under applications. $\underline{Materials\;and\;Methods}$: Considering the feature of constitution for systems and the therapeutic methodology of CyberKnife, the list of quality control (QC) was established and divided dependent on the each period of operations. And then all these developed QC lists were categorized into three groups such as basic QC, delivery specific QC, and patient specific QC based on the each purpose of QA. In order to verify the validity of the established QA program, this QC lists was applied to two CyberKnife centers. The acceptable tolerance was based on the undertaking inspection list from the CyberKnife manufacturer and the QC results during last three years of two CyberKnife centers in Korea. The acquired measurement results were evaluated for the analysis of the current QA status and the verification of the propriety for the developed QA program. $\underline{Results}$: The current QA status of two CyberKnife centers was evaluated from the accuracy of all measurements in relation with application of the established QA program. Each measurement result was verified having a good agreement within the acceptable tolerance limit of the developed QA program. $\underline{Conclusion}$: It is considered that the developed QA program in this research could be established the standardization of QC methods for CyberKnife and confirmed the accuracy and stability for the image-guided stereotactic radiotherapy.

• The Journal of Korean Society for Radiation Therapy
• /
• v.34
• /
• pp.7-12
• /
• 2022

Purpose: When it is difficult to secure the skin dose when treating Irregularly Shaped Skin Surface such as the nose where it is difficult to apply a bolus, increase the skin dose with a treatment plan that combines the IMRT (Intensity Modulated Radiation Therapy) delivery technique and FFF (Flattening Filter Free), It was tried to find out whether or not through the phantom experiment. Materials & Methods: Based on the 6MV-FF (Flattening Filter) and VMAT (Volumetric-Modulated Arc Therapy) treatment plans, which are the most commonly used treatment plans for head and neck cancer, A comparison group was created by combining VMAT and IMRT, FF and FFF, and the presence or absence of 5 mm bolus application. A virtual target was created on the Rando Phantom's nose, and a virtual bolus of 5 mm was applied assuming full contact on the Rando Phantom's nose. Five measurement points were determined based on the phantom's nose, and the absorbed dose was measured by irradiating each treatment plan 3 times per treatment plan according to the treatment technique and whether or not the bolus was applied. Result: The difference in skin dose in FF vs FFF increased in the case of FFF in VMAT bolus off, and there was no difference in case of IMRT bolus off. In VMAT bolus 5 mm and IMRT bolus 5 mm, it was confirmed that the skin dose was rather decreased in FFF. The difference in skin dose between VMAT and IMRT increased only in the case of FFF bolus off, and there was no statistical difference in the rest. For the difference in skin dose between bolus off vs bolus 5 mm, it was confirmed that the skin dose increased at bolus 5 mm, except for the case of using IMRT FFF. The treatment plan combining IMRT and FFF did not find any statistically significant difference as a result of analyzing the measured values of the treatment plan skin dose applied with a 5 mm bolus using the commonly used VMAT and FF. Therefore, it is thought that by using IMRT_FFF, it is possible to deliver a skin dose similar to that of applying a 5 mm bolus to VMAT_FF, which can be useful for patients who need a high skin dose but have difficulty applying a bolus. Conclusion: For patients who find it difficult to apply bolus, an increase in skin dose can be expected with a treatment plan that properly combines IMRT and FFF compared to VMAT and FF.

• KIPS Transactions on Computer and Communication Systems
• /
• v.9 no.11
• /
• pp.256-264
• /
• 2020

Industrial Wireless Sensor Networks (IWSNs) is exploited to achieve various objectives such as improving productivity and reducing cost in the diversity of industrial application, and it has requirements such as low-delay and high reliability packet transmission. To accomplish the requirement, the network manager performs graph construction and resource allocation about network topology, and determines the transmission cycle and path of each node in advance. However, this network management scheme cannot treat mobile devices that cause continuous topology changes because graph reconstruction and resource reallocation should be performed as network topology changes. That is, despite the growing need of mobile devices in many industries, existing scheme cannot adequately respond to path failure caused by movement of mobile device and packet loss in the process of path recovery. To solve this problem, a network management scheme is required to prevent packet loss caused by mobile devices. Thus, we analyse the location and movement cycle of mobile devices over time using machine learning for predicting the mobility pattern. In the proposed scheme, the network manager could prevent the problems caused by mobile devices through performing graph construction and resource allocation for the predicted network topology based on the movement pattern. Performance evaluation results show a prediction rate of about 86% compared with actual movement pattern, and a higher packet delivery ratio and a lower resource share compared to existing scheme.

• Clean Technology
• /
• v.26 no.3
• /
• pp.228-236
• /
• 2020

Korea has an economy based on manufacturing industrial fields, which produce high amounts of hazardous wastes, in spite of few landfill candidates, and a significant concern for fine airborne particulates; therefore, traditional waste management is difficult to apply in this country. Moreover, waste collection and accumulation have recently been intensified by the waste import prohibitions or regulations in developing nations, the universalization of delivery services in Korea, and the global COVID-19 crisis. This study thus presents a domestic waste management strategy that aims to address the recent issues on waste. The contents of the strategy as the main results of the study include the (1) improvement of the compatibility of the classification codes between the domestic hazardous waste and the international ones such as those of the Basel Convention; (2) consideration of the mixed hazard indices to represent toxicity from low-content components such as rare earth metals often contained in electrical and electronic equipment waste; (3) management application based on risks throughout the life cycles of waste; (4) establishment of detailed material flow information of waste by integrating the Albaro system, Pollutant Release and Transfer Register (PRTR) system, and online trade databases; (5) real-time monitoring and prediction of the waste movement or discharge using positional sensors and geographic information systems, among others; and (6) selection and implementation of optimal treatment or recycling practices through Life Cycle Assessment (LCA) and clean technologies.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.19
• /
• pp.8063-8067
• /
• 2014

Background: Cervical cancer is a major public health problem in Bangladesh. Persistence of high risk human papillomavirus (HRHPV) influences the progression of the disease, with an important role in followup for cervical intraepithelial neoplasia (CIN). Objective: To establish application of high risk HPV DNA test in the follow-up of women after treatment of CIN. Materials and Methods: This cross-sectional and hospital based study was carried out among 145 CIN treated women during the previous six months to three years at the colposcopy clinic of Bangabandhu Sheikh Mujib Medical University, Dhaka, between January 2011 and June 2012. Pap smear and HPV samples were collected and colposcopy was performed to find out the persistence of the disease. Cervical samples obtained were tested for HPV DNA using the Hybrid Capture II (HC-II) test. A cervical biopsy was collected whenever necessary. The results were compared to assess the efficacy of different methods during follow up such as Pap smear, HPV test and colposcopy. Results: Mean age of the recruited women (n=145) was 33.6 (${\pm}7.6$), mean age of marriage was 16.8 (${\pm}2.9$) and mean age of 1st delivery was 18.8 (${\pm}3.5$) years. More than half had high grade CIN before treatment and 115 (79.3%) women were managed by LEEP and 20.7% were managed by cold coagulation. Among the 145 treated women, 139 were negative for HPV DNA and six of them (4.1%) were HPV positive. Sensitivity of Pap smear (40.0) and HPV DNA test (40.0) was poor, but specificity was quite satisfactory (>93.0) for all the tests. Conclusions: The high risk HPV DNA test can be an effective method of identifying residual disease. It can be added to colposcopy and this should be applied to all treated women attending for their first or second post-treatment follow-up visit at 6 months to one year, irrespective of the grade of treated CIN.

• Journal of Periodontal and Implant Science
• /
• v.29 no.2
• /
• pp.371-387
• /
• 1999

The present study was performed to assess and compare the clinical and microbiological effects following local application of 2% minocycline gel or 0.1% chlorhexidine subgingival irrigation to augment scaling and root planing in patients with moderate to advanced chronic adult periodontitis. 32 healthy patients with moderate to advanced chronic adult periodontitis were enrolled in the study. In each patient, the quadrants that had 2 or more teeth with $5{\sim}8mm$ probing pocket depth and radiographic evidence of alveolar bone loss were selected and divided into test side and control side according to the split-mouth design. All patients received standardized oral hygiene instructions at the beginning of the study and all remaining teeth received scaling and root planing until 0 week. The 2% minocycline gel was applied to periodontal pocket at 0, 1, 2, 3 week in the test side. The 0.1% chlorhexidine solution and the normal saline were irrigated subgingivally for about 30 seconds in the positive control side and negative control side respectively. The clinical and microbiological analysis carried out at 0, 4, 8, and 12 weeks . The results of this study were as follows; 1. In saline irrigation group, there was no adjunctive effects in probing pocket depth reduction, sulcular bleeding index and no significant changes in relative proportions of subgingival bacteria. 2. The chlorhexidine irrigation as an adjunct to scaling and root planing results in reduction in the plaque index and sulcular bleeding index, but there was not statistically significant. The relative proportion of spirochetes was significantly reduced, but the proportion of motile rods was no significant reduction. 3. The minocycline gel delivered subgingivally as an adjunct to scaling and root planing provide significant benefit in reducing probing depths and sulcular bleeding index compared to saline and chlorhexidine irrigation groups. 4. The relative proportions of spirochetes and motile rods were significantly reduced and the proportions of cocci and non-motile bacteria were correspondingly increased in the minocycline gel group. In conclusion, minocycline gel delivered subgingivally as an adjunct to scaling and root planing induces clinical and microbial responses more favorable for periodontal health than saline and chlorhexidine subgingival irrigation.

• The Journal of Fisheries Business Administration
• /
• v.29 no.2
• /
• pp.111-141
• /
• 1998

Why are auctions so prevalent in fisheries fields\ulcorner One answer is, perhaps, that fisheries products have no standard value. The price of any catch of fish (at least of fish destined for the fresh fish market) depends on the demand and supply conditions at a specific moment of time, influenced by prospective market developments and prices must be remade for each transaction. There are various auction schemes including written-bid method in Korea. It is difficult to make decision the application of auction selling in market distribution. One reason is the absence of adequate data on which to base firm statements. There is very little precise information about the relative volume handled by auction scheme as compared with other sales schemes Because of the paucity reliable data, one must depend largely on qualitative in attempting to above this problem. This paper is designed to examine which auction scheme is more efficient as a economic tool by introducing the three auctions, as samples, utilized in Koheung peninsula. Koheung coast with abundant fisheries resource, locates on the Middle-South part in Korea and has three auction firm operating by fisheries cooperatives. fur selling of dry fish included sea weed, live fish and fresh fish respectively, As a result, 1 found that there are three interesting auction schemes as follow : 1. More than one winners are selected as buyers. The highest bidder can at first get fishes he wants to buy, second winner can get surplus fishes after the highest bidder employes one's privilege with the highest pay, and next winner would be a buyer if fishes would be left in sequence after being sold with higher price. Every fisherman can sell one' s fishes with equal unit price if he delivery it to the winner within one day. Therefore, all the vendors feel they are equal members of fisheries cooperation. 2. Written-bid pricing on the cover of handy book. It is easy to write and to erase the figure more than on the small black board, and is convenient also to keep in the pocket. 3. Auctioning on the fixed platform with fixed fish tank is a very fast auction scheme in spite of short displaying time. Auctioneer presides bidding at one place on the fixed platform, instead of moving, vendors should carry a container of live fishes in the fish tank into showing table in front of would-be buyers and auctioneer. Although the applicability of the auction system to a marketing problem depends in part on subjective considerations by those making decision, basically it is a matter of comparative economic efficiency. In general, if the scheme maximizes returns in relation to the effort expanded by both buyers and sellers, it will be utilized. If it does not, a more efficiency may take place over a period of time, but, even more important, those making decisions may become aware of the potentialities of new schemes. Therefore, in order to applicate the three interesting auction schemes introduced in this paper to other fisheries market, it is necessary not only to analyze many other auction schemes but also to compare the economic efficiency those schemes utilizing in other fisheries market.