• Journal of the Korean Academy of Esthetic Dentistry
• /
• v.23 no.1
• /
• pp.34-40
• /
• 2014

There are several treatment options for rehabilitation of partial edentulism including the use of conventional or implant-retained fixed prostheses. However, such prosthetic options cannot always be possible because of compromised general and oral health (i.e. loss of supporting tissues, medical reasons, extensive surgical protocol and osseointegration failure of dental implant) as well as the affordability of patients. In some cases, removable partial denture provides easier access for oral hygiene procedures and the ability to correct discrepancies in dental arch relationships than implant fixed prosthesis. Recently, Implant Supported Removable Partial Denture (ISRPD) where to place dental implant in strategic position has been suggested to improve the limitation and shortcomings of conventional RPD. ISPRD can overcome mechanical limition of conventional RPD by placing implant in a favorable position and can be cost-effective, prosthetic solution for partially edentulous patients who are not immediate candidates for extensive, fixed implant supported restorations. Incorporation of dental implants to improve the RPD support and retention and to enhance patient acceptance should be considered when treatment planning for RPD. In this case, 59 years old male patient who received dental treatment of implant fixed prosthesis on both side of the upper jaw and implant overdenture on lower jaw showed implant abutment screw fracture on #15i and osseointegration failure on multiple number of implants. After removing failed implants, we planned ISRPD using #15i,24i,25i,26i and #23 natural tooth for RPD abutment. We fabricated #23 surveyed crown,#24i=25i=26i surveyed bridge and #15i gold coping for support,retention and stability for RPD. Periodic follow up check for 2years has been performed since the ISRPD delivery to the patient. No sign of screw loosening, fracture or bone resorption around abutment implants were detected.

• Tuberculosis and Respiratory Diseases
• /
• v.42 no.6
• /
• pp.888-899
• /
• 1995

Background: Topical inhaled steroids, budesonide(Bu) and beclomethasone dipropionate (BOP), are now established as effective drugs in the management of chronic asthma. These drugs have high topical anti-inflammatory effect with low systemic activity. This study was performed to determine the effects of two inhaled corticosteroids, Bu and BOP, on the adrenocortical supression in 44 patients with bronchial asthma or chronic obstructive pulmonary disease. Methods: The adrenocortical function was assessed by measurement of serum cortisol concentration at 8 o'clock in morning and free cortisol in 24-hour urine collection at interval in 44 patients. No steroid was administered during the pretreatment period of 10 days and the final 6 days of the study. Each subject inhaled BOP or Bu, in daily doses of 800 or 1,600 micrograms for 12 days. The dose was delivered by metered dose inhaler (MDI) or diskhaler or large spacing device attached to MDI. Results: The levels of serum cortisol and 24-hour urinary free cortisol were decreased during the treatment period in patients inhaled Bu delivered by MDI in daily doses of 800 and 1,600 micrograms. In contrast, serum cortisol level was decreased on 6 and 12th day of treatment period in patients with BDP diskhaler in daily doses of 800 micrograms. In daily doses of 1,600 micrograms, the serum cortisol and 24hour urine free cortisol levels were decreased on 6, 9 and 12th day of treatment period in patients with BDP disk haler. The serum cortisol and 24-hour urinary free cortisol levels were not significantly decreased during the treatment period in patients inhaled Bu delivered by large spacing device attached to a MDI. Conclusion: These results showed that 1) the endogenous cortisol secretion was suppressed after inhalation of BDP and Bu in daily doses of 800 and 1,600micrograms, 2) Bu with MDI suppressed the adrenocortical function more than BDP with diskhaler, in daily doses of 1600 micrograms. and 3)large spacing device attached to a MDI might decrease the risk of suppression in the hypothalamic -pituitary- adrenal axis.

• Research in Community and Public Health Nursing
• /
• v.12 no.1
• /
• pp.288-298
• /
• 2001

This article makes an attempt to evaluate the extent of developing community health nursing knowledge and to suggest the direction of developing a body of knowledge henceforth through the results of analysis for contents and outcomes of all literatures. which have been published in the Journal related to community health nursing. Refer to the following for the result of this article. 1. The total number of literatures analyzed amounted to 100 pieces in Journal of community health nursing society. 78 in Journal of industrial nursing society, 134 in Journal of school health society. 40 in Journal of home care nursing society. 2. Journal of community health nursing society Health needs and educational-behavioral diagnoses, which are more concrete nursing assessments and diagnoses. formed the main current(54%) of articles published in Journal of community health nursing society since 1992. There was a quantitative growth as well as a qualitative advance. Through a classification by the type of a body of knowledge. It was found that the knowledge providing nursing practice with bases, commanded an overwhelming majority(71.8%). Also, Researches on systemic supports for nursing practice are showing a tendency to increase. 3. Journal of industrial nursing society 52.6% of research papers presented in Journal of industrial nursing society dealt with health problem of workers. assessment of risk factors, diagnosis of health behaviors. Because of the beginning of an industrial nursing, the domain of nursing management to establish the role and task, work condition, training. documentary system made up 23 percent of research, subjects. A knowledge providing nursing practice with bases have a majority, 69.2%. In addition. the subject concerning a systemic support and quality assurance was scarce but continuously presented. 4. Journal of school health society The major point of this journal is the identification of health problems and risk factors which belong to assessment and diagnosis domain(56.8%) regardless of year, Because of the interdisciplinary characteristic. The knowledge on quality assurance of nursing practice is relatively rare. But, articles related to a systemic support is plentiful. 5. Journal of home care nursing society In its infancy, there was a large number of papers concerning need assessment and diagnosis, Comparing others, this journal has introduced a good many of articles related to program management. delivery system. service fee, etc that belong to domain of systemic support for nursing practice. 6. It is showing definitely that quantity and extent of research have grown for a short period. See the analysis in terms of nursing process, studies related to the domain of assessment and diagnosis command an absolute majority regardless of kinds of journal. Although articles referring to program management and implementation is increasing in number, it is scarce to evaluate a nursing program and grope for an improvement. Also, program development based on a theoretical framework is little. Therefore much more scientific effort to ensure profession should be executed. 7. In the methodological aspect, longitudinal study needs to be carried out so that we could show the evidence based nursing theory. To develop a more general theory, we have to conduct a study of various subjects and improve a validity of tools through a repeat test. In addition, the effort for interdisciplinary cooperation is needed.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.39 no.10
• /
• pp.1535-1544
• /
• 2010

This study was conducted to evaluate the sanitation management practices in food manufacturing companies that supply food and food ingredients to school foodservice operations. Subjects consisted of 34 food manufacturing factories located in the Daegu and Gyeongbuk areas. Sanitation performance was self-evaluated using a Likert 5-point scale. The total mean score for factory sanitation performance was 4.72. Scores for perceived sanitation management performance in the factories were as follows: management of material (4.90); personal hygiene (4.78); management of work (4.71); management of workplace and vicinity (4.68); and food and raw material transportation (4.67). Participating companies that had HACCP certification programs scored high on the following sanitation inspection items: washing and sanitation guides, adequate equipment for correct hand washing, and sanitation of raw material delivery vans. The mean frequency for employee sanitation education was 2.8 times per month. Factory managers believed that their sanitation management programs kept their food safe and that the food was produced and delivered with a high degree of safety. However, they thought that food sanitation standardization was needed in order to supply high-quality and safe food items. In terms of traceability, 58.8% of the raw materials were traceable and 61.8% of the manufactured products were traceable. Sanitation management performance scores for the participating food manufacturing companies were high, although the soybean sprouts processing companies had comparatively low scores. Management reinforcement of employee sanitation education and a sense of duty and pride among factory employees will promote adequate and appropriate sanitation management performance for food safety and quality in factories that supply food and ingredients to school foodservice operations.

• Journal of Genetic Medicine
• /
• v.8 no.2
• /
• pp.113-118
• /
• 2011

Purpose: Placental corticotropin-releasing hormone receptor type 1 (CRHR1) expression is reduced in pregnancies with abnormal placental function such as preeclampsia (PE), and the levels and/or function of CRHR1 are genetically influenced. The aim of this study was to investigate the association between the c.33+8199C>T polymorphism in the CRHR1 gene and PE in a Korean population. Materials and Methods: Using a case-control design, the association between the CRHR1 polymorphism and the risk of PE was investigated in 203 individuals with PE and 211 normotensive controls. Genotypes were determined using a SNapShot kit and an ABI Prism 3100 Genetic analyzer. Results: Genotypes and allele frequencies for the CRHR1 polymorphism did not differ between PE and normotensive pregnancies. The variant T allele was more frequent than the ancestral C allele in both of the groups and was more frequent in the controls than in the cases. In risk analysis for PE, there was not an increased risk of preeclampsia in subjects who were concomitant homozygous rare allele genotypes (CC) (OR, 0.3; P=0.15) or heterozygous rare allele genotypes (TC) (OR, 0.8; P=0.29). There were no differences in the complications of PE such as severity or preterm delivery in patients with the CRHR1 polymorphism. Conclusion: Our findings indicate that the CRHR1 polymorphism was not associated with PE in the present Korean study group.

• Journal of Intelligence and Information Systems
• /
• v.20 no.3
• /
• pp.1-18
• /
• 2014

Over the past years RFID/SN has been an elementary technology in a diversity of applications for the ubiquitous environments, especially for Internet of Things. However, one of obstacles for widespread deployment of RFID technology is the inherent unreliability of the RFID data streams by tag readers. In particular, the problem of false readings such as lost readings and mistaken readings needs to be treated by RFID middleware systems because false readings ultimately degrade the quality of application services due to the dirty data delivered by middleware systems. As a result, for the higher quality of services, an RFID middleware system is responsible for intelligently dealing with false readings for the delivery of clean data to the applications in accordance with the tag reading environment. One of popular techniques used to compensate false readings is a sliding window filter. In a sliding window scheme, it is evident that determining optimal window size intelligently is a nontrivial important task in RFID middleware systems in order to reduce false readings, especially in mobile environments. In this paper, for the purpose of reducing false readings by intelligent window adaption, we propose a new adaptive RFID data cleaning scheme based on window sliding for a single tag. Unlike previous works based on a binomial sampling model, we introduce the weight averaging. Our insight starts from the need to differentiate the past readings and the current readings, since the more recent readings may indicate the more accurate tag transitions. Owing to weight averaging, our scheme is expected to dynamically adapt the window size in an efficient manner even for non-homogeneous reading patterns in mobile environments. In addition, we analyze reading patterns in the window and effects of decreased window so that a more accurate and efficient decision on window adaption can be made. With our scheme, we can expect to obtain the ultimate goal that RFID middleware systems can provide applications with more clean data so that they can ensure high quality of intended services.

• Journal of Intelligence and Information Systems
• /
• v.16 no.2
• /
• pp.73-94
• /
• 2010

The attending system is a medical system that allows doctors in clinics to use the extra equipment in hospitals-beds, laboratory, operating room, etc-for their patient's care under a contract between the doctors and hospitals. Therefore, the system is very beneficial in terms of the efficiency of the usage of medical resources. However, it is necessary to develop a strong support system to strengthen its weaknesses and supplement its merits. If doctors use hospital beds under the attending system of hospitals, they would be able to check a patient's condition often and provide them with nursing care services. However, the current attending system lacks delivery and assistance support. Thus, for the successful performance of the attending system, a networking system should be developed to facilitate communication between the doctors and nurses. In particular, the nursing records in the attending system could help doctors monitor the patient's condition and provision of nursing care services. A nursing record is the formal documentation associated with nursing care. It is merely a data repository that helps nurses to track their activities; nursing records thus represent a resource of primary information that can be reused. In order to maximize their usefulness, nursing records have been introduced as part of computerized patient records. However, nursing records are internal data that are not disclosed by hospitals. Moreover, the lack of standardization of the record list makes it difficult to share nursing records. Under the attending system, nurses would want to minimize the amount of effort they have to put in for the maintenance of additional records. Hence, they would try to maintain the current level of nursing records in the form of record lists and record attributes, while doctors would require more detailed and real-time information about their patients in order to monitor their condition. Therefore, this study developed a system for assisting in the maintenance and sharing of the nursing records under the attending system. In contrast to previous research on the functionality of computer-based nursing records, we have emphasized the practical usefulness of nursing records from the viewpoint of the actual implementation of the attending system. We suggested that nurses could design a nursing record dictionary for their convenience, and that doctors and nurses could confirm the definitions that they looked up in the dictionary through negotiations with intelligent agents. Such an agent-based system could facilitate networking among medical institutes. Multi-agent systems are a widely accepted paradigm for the distribution and sharing of computation workloads in the scientific community. Agent-based systems have been developed with differences in functional cooperation, coordination, and negotiation. To increase such communication, a framework for a multi-agent based system is proposed in this study. The agent-based approach is useful for developing a system that promotes trade-offs between transactions involving multiple attributes. A brief summary of our contributions follows. First, we propose an efficient and accurate utility representation and acquisition mechanism based on a preference scale while minimizing user interactions with the agent. Trade-offs between various transaction attributes can also be easily computed. Second, by providing a multi-attribute negotiation framework based on the attribute utility evaluation mechanism, we allow both the doctors in charge and nurses to negotiate over various transaction attributes in the nursing record lists that are defined by the latter. Third, we have designed the architecture of the nursing record management server and a system of agents that provides support to the doctors and nurses with regard to the framework and mechanisms proposed above. A formal protocol has also been developed to create and control the communication required for negotiations. We verified the realization of the system by developing a web-based prototype. The system was implemented using ASP and IIS5.1.

• Journal of the Korean Institute of Navigation
• /
• v.4 no.2
• /
• pp.45-79
• /
• 1980

The aim of this paper is to analyze the mechanics of price formation in the tramp shipping. For the purpose of this study, the main characteristics of tramp freight rates and the market is examined, and a brief examination of the nature ofthe costs of operation is given which are essential for the understanding of the functioning of shipping firms as well as for the understanding of developments in the tramp freight market. The demand and supply relationships in the market is also analysed in detail. Tramp shipping is an industry that has a market which functions under conditions that are not dissimilar to the theoretical model of perfect competition. However, it does notmean that tramp shipping market is a perfectly competitive market. It is apparent that this realworld competitive system has its imperfections, which means that the market for tramp shipping is near to being a perfectly competitive market on an internaitonal scale and it is freight are therefore subjext to the laws of supply and demand. In theory, the minimum freight rate in the short term is that at which the lowest cost vessels will lay-up in preference to operating, and is equal to the variable costs minus lay-up costs; and this would imply that in all times except those of full employment for ships there is a tendency for newer low-cost, and, probably, faster vessels to be driving the older high-cost vessels in the breaker's yards. In this case, shipowners may be reluctant to lay-up their ships becasue of obligations to crews, or because they would lose credibility with shippers or financiers, or simply because of lost prestige. Mainly, however, the decision is made on strictly economic grounds. When, for example, the total operating costs minus the likely freight earnings are greater than the cost of taking the ship out of service, maintaining it, and recommissioning it, then a ship may be considered for laying-up; shipowners will, in other words, run the ships at freight earnings below operating costs by as much as the cost of laying them up. As described above, the freight rates fixed on the tramp shipping market are subject to the laws of supply and demand. In other words, the basic properties of supply and demand are of significance so far as price or rate fluctuations in the tramp freight market are concerned. In connection with the same of the demand for tramp shipping services, the following points should be brone in mind: (a) That the magnitude of demand for sea transport of dry cargoes in general and for tramp shipping services in particular is increasing in the long run. (b) That owning to external factors, the demand for tramp shipping services is capable of varying sharphy at a given going of time. (c) The demad for the industry's services tends to be price inelastic in the short run. On the other hand the demand for the services offered by the individual shipping firm tends as a rule to be infinitely price elastic. In the meantime, the properties of the supply of the tramp shipping facilities are that it cannot expand or contract in the short run. Also, that in the long run there is a time-lag between entrepreneurs' decision to expand their fleets and the actual time of delivery of the new vessels. Thus, supply is inelastic and not capable of responding to demand and price changes at a given period of time. In conclusion, it can be safely stated that short-run changes in freight rates are a direct result of variations in the magnitude of demand for tramp shipping facilities, whilest the average level of freight rates is brought down to relatively low levels over prolonged periods of time.

• Development and Reproduction
• /
• v.10 no.3
• /
• pp.185-192
• /
• 2006

It is known that maternal diabetes induces a premature delivery and a congenital malformation. Although it was suggested that hyperglycemia is a main cause, little has been known. The effects of subtotal pancreactomized animal as a diabetic model on the embryo and the offspring were investigated. 1) Although survival rate of offsprings from the 90% pancreactomized female was lower than that of control, body weight of the survived offsprings was similar to that of control until 6 weeks after birth. When the liver was investigated, abnormal tissue was observed in both female and male offsprings from the pancreactomized mother. The level of major urinary protein(MUP) that is synthesized in the liver and secrets into urine was decreased in both female and male, supporting the liver abnormality. 2) In the pancreactomized female, size of the Langhan's island was increased and the liver also was observed abnormal. However, blood glucose level of the pancreactomized mother was not different from that of control. The low body weight and survival rate of offsprings from the $inhibin-{\alpha}$ overexpressed mice was very similar to those of the offsprings from diabetic mother. Thus when the mother itself was investigated after DNA injection, blood glucose level in the $inhibin-{\alpha}$ overexpressed mice was not different from that of control although size of the Langhan's island was decreased. Taken together, subtotal pancreactomy affected the offspring and embryo and influenced deeply the mother itself. However glucose level of the mother was not changed during investigation. It suggested that the relationship between the diabetic mother and embryo through offspring is very complex.

• Archives of design research
• /
• v.12 no.2
• /
• pp.157-168
• /
• 1999

Stone in the Cho Sun Dynasty has been used as the material of industry arts, widely building materials and an important material for the artistic design. But it has been generally used as an use of practical living Product like, suban, a metal printing type, a fire place, a pillowcase, a pencil case, etc, and ornament with the quality of stone material and the aesthetic view. There are several problems as like size, quantity, delivery and processing method with the stne material according to its variety and selection. Accordingly it has been studied through the whole process of shape, a material selection of design and processing method as well as studying about small stone crafts which were manufactured in the Cho Sun Dynasty, considering these problems. Stone crafts in Cho Sun Dynasty has been widely used as a living tool. There was some what difference on manufacturing purpose on its technique of folk crafts of stone crafts, but, through the research of collected crafts, they were almost the same that social need, user's taste and hobby in those days were reflected in. In the result of analysis as dividing the stone crafts into daily living product, stationery and tool, the major of daily products have been manufactured with emphasis of practicability. And they have been manufactured from agalmatolite for the propose of use. further, kitchen product had no design due to the function and living products which has been used in the main living room has been carved with the decorative expression of the various form by using intaglic, relieve, inlaid technique, etc. For the stationery, it has been characterized with aesthetic point considering the decorative effects & selection of material in accordance with use. A material for manufacturing has been used in the range of agalmtolite, atopaz, a sapphire, white stone etc. As the result of this research, It was noticeable that there was the spleudidness on the expression of design and carving. It was also noticeable that black stone and guanite have been widely esed because it didn't need the delicacy as a tool.