• Restorative Dentistry and Endodontics
• /
• 제29권3호
• /
• pp.233-238
• /
• 2004

The purpose of this study was to evaluate the effect of immediate or delayed composite resin filling on dentinal microtensile bond strength (${\mu}TBS$) after applied the adhesive. The coronal dentin of human third molars was exposed. Single-Bond or One-Step was applied on the dentin surfaces. and composite resin were constructed immediately (group 1) or 5min., 10min., 15min., 20min. and 30min. (groups 2-6) after an adhesive was applied. The specimens were sectioned and made bar-shaped. Each surface area of them was about $1\textrm{mm}^2$. The ${\mu}TBS$ test was performed by EZ test. The results were analysed by One-way ANOVA and Tukey's test at 95% significance level. The results suggested that the ${\mu}TBS$ of Single-Bond to dentin was decreased when the composite resin was constructed 20min. and 30min. after Single-Bond was applied. But the ${\mu}TBS$ of One-Step was not affected by delayed composite resin filling.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 추계학술대회논문집
• /
• pp.80-83
• /
• 2003

Transcribability of pit or land groove structures in replicating an optical disk substrate greatly affects the performance of a high-density optical disk. However, a solidified layer, generated during the polymer filling, deteriorates transcribability because the solidified layer prevents the polymer melt in filling the sub-micro patterns. Therefore, the development of the solidified layer during filling stage of injection molding must be delayed. For this delay, passive heating by insulation layer has been used. In the present study, to examine the development of the solidified layer delayed by passive heating, the flow of polymer melt with passive heating was analyzed. Passive heating markedly delayed the development of the solidified layer, reduced the viscosity of the polymer melt, and increased the fluidity of the polymer melt in the vicinity of the stamper surface with the sub-micro patterns. As a result, we predict that passive heating can improve transcribability of an optical disk substrate. To verify our prediction, we fabricated an optical disk substrate by using passive heating of a mold and measured the transcribability.

• 소성∙가공
• /
• 제13권1호
• /
• pp.39-44
• /
• 2004

Transcribability of pit or land groove structures in replicating an optical disk substrate greatly affects the performance of a high-density optical disk. However, a solidified layer, generated during the polymer filling, deteriorates transcribability because the solidified layer prevents the polymer melt from filling the sub-micro patterns. Therefore, the development of the solidified layer during filling stage of injection molding must be delayed. For this delay, passive heating by insulation layer has been used. In the present study, to examine the development of the solidified layer delayed by passive heating, the flow of polymer melt with passive heating was analyzed. Passive heating markedly delayed the development of the solidified layer, reduced the viscosity of the polymer melt, and increased the fluidity of the polymer melt in the vicinity of the stamper surface with the sub-micro patterns. As a result, we predict that passive heating can improve transcribability of an optical disk substrate. To verify our prediction, we fabricated an optical disk substrate by using passive heating of a mold and measured the transcribability of an optical disk substrate.

• 한국작물학회지
• /
• 제48권3호
• /
• pp.224-231
• /
• 2003

This study was conducted to investigate the varietal differences in leaf senescence during ripening stage and its relation to grain yield of rice. During grain filling period leaf senescence was evaluated by SPAD readings (an indirect indicator of chlorophyll content) for 74 varieties including local, improved domestic, and introduced varieties in the field condition. Leaf senescence was varied greatly among 74 varieties. Jodongji and Dadajo known as local rice varieties had significantly lower SPAD value than the other varieties and became senescent rapidly. However, SPAD value of the flag leaf and 2nd leaf of SNU-SG1 were much higher than the other varieties and leaves of SNU-SG1 also showed a tendency of delayed senescence compared to the other varieties. There were significantly positive correlation between cumulated SPAD value of upper leaf(flag leaf and 2nd leaf) during 35 days after heading and grain yield divided by sunshine hour during 40 days of grain filling and compensated for temperature effect, and cumulated SPAD value of the 4th leaf showed negative correlation with the yield. That is, the delayed senescence of the upper leaves and the rapid senescence of lower leaves were positively associated with grain yield increase.

• Restorative Dentistry and Endodontics
• /
• 제10권1호
• /
• pp.93-101
• /
• 1984

The experimental study was made to investigate the effect of the "Heliosit" composite resin on the dental pulp. The 36 class V cavities were prepared on the healthy permanent teeth of 3 days, and were divided into 5 groups and filled with the experimental filling materials. Control group: Zinc Oxide-Eugenol cement filling Experimental groups: Group 1: Dentin Adhesit application & Heliosit filling with or without dycal base Group 2: Heliosit filling with or without dycal base Group 3: Durafill filling with dycal base Group 4: Hipol filling with dycal base Animals were sacrificed after 1 weeks, 2 weeks, and 4 weeks following operation. The teeth were decalcified, sectioned and stained with hematoxylin and eosin. The results obtained form this study were as follows: 1. All experimental group showed slight pulp response. 2. Dentin Adhesit group showed minimal pulp response in both dycal bases and no base cases. 3. In group 2, mild pulp response was found in early stage and repairing process was found as the time elapsed. In no base cases, healing process was delayed slightly. 4. There was little difference in the result among Heliosit group, Durafill group and Hipol group.

• 한국작물학회지
• /
• 제48권3호
• /
• pp.216-223
• /
• 2003

This study was conducted to investigate the varietal differences in leaf senescence and the relationship between leaf senescence and photosynthesis during ripening stage of rice. During grain filling period, leaf senescence was evaluated by SPAD readings (an indirect indicator of chlorophyll content) for 3 rice varieties (SNU-SG1, Hwaseongbyeo, Nampungbyeo). SPAD value of flag leaf and 2nd leaf of SNU-SG1 were much higher than the other varieties and the leaves of SNU-SG1 also showed a tendency of delayed senescence as compared to the other varieties. Photosynthesis at light saturation (Pmax) of flag, 2nd and 3rd leaf in SNU-SG1 during grain filling period were much higher than Hwaseongbyeo and Nampungbyeo. The Pmax of the flag leaf in SNU-SG1 was especially higher over 20% than the other varieties. It was due to its higher mesophyll conductance and stomatal conductance as compared to the other varieties. Pmax, stomatal conductance and mesophyll conductance had positive correlation with SPAD value and nitrogen concentration of leaves. In conclusion, the stay green characteristics of SNU-SG1 would contribute to increasing the grain yield through the improved photosynthesis during grain filling.

• 정보저장시스템학회:학술대회논문집
• /
• 정보저장시스템학회 2005년도 추계학술대회 논문집
• /
• pp.26-30
• /
• 2005

Stamper surface temperature is very critical in replicating the high density optical disc substrates using injection molding as the pit or land/groove patterns on the optical disc substrate have decreased due to the rapid increase of areal density. During the filling stage, the polymer melt in the vicinity of the stamper surfaces rapidly solidifies and the solidified layer generated during polymer filling greatly deteriorates transcribability and fluidity of polymer melt. To improve transcribability and fluidity of polymer melt, stamper surface temperature should be controlled such that the growth of the solidified layer is delayed during the filling stage. In this study, the effect of heating on replication process was simulated numerically. Then, an injection mold equipped with instant active heating system was designed and constructed to raise the stamper surface temperature over the glass transition temperature during filling stage of the injection molding. Also, the closed loop controller using the Kalman filter and the linear quadratic Gaussian regulator was designed. As a result, the stamper surface temperature was controlled according to the desired reference stamper surface temperature.

• 정보저장시스템학회논문집
• /
• 제2권2호
• /
• pp.100-104
• /
• 2006

Stamper surface temperature is very critical in replicating the high density optical disc substrates using injection molding as the pit or land/groove patterns on the optical disc substrate have decreased due to the rapid increase of areal density. During the filling stage, the polymer melt in the vicinity of the stamper surfaces rapidly solidifies and the solidified layer generated during polymer filling greatly deteriorates transcribability and fluidity of polymer melt. To improve transcribability and fluidity of polymer melt, stamper surface temperature should be controlled such that the growth of the solidified layer is delayed during the filling stage. In this study, the effect of heating on replication process was simulated numerically. Then, an injection mold equipped with instant active heating system was designed and constructed to raise the stamper surface temperature over the glass transition temperature during filling stage of the injection molding. Also, the closed loop controller using the Kalman filter and the linear quadratic Gaussian regulator was designed. As a result. the stamper surface temperature was controlled according to the desired reference stamper surface temperature.

• Journal of Crop Science and Biotechnology
• /
• 제11권1호
• /
• pp.75-82
• /
• 2008

Functional stay-green is a beneficial trait that may increase grain yield through the sustained photosynthetic competence during monocarpic senescence in cereal crops. The temporal changes of photosynthesis and related characteristics throughout the grain filling period of a stay-green japonica rice "SNU-SG1" was compared in growth chamber conditions with three high-yielding cultivars(HYVs) and their $F_1$ hybrids with SNU-SG1. SNU-SG1 exhibited a typical characteristic of functional stay-green in terms of chlorophyll degradation and photosynthetic competence during grain filling. According to the photosynthesis-light response curve measured at 10 and 35 d after heading for the flag leaf, SNU-SG1 exhibited higher initial light conversion efficiency and thus higher gross photosynthetic rate at light saturation compared to HYVs. Light saturation point was not different among genotypes, ranging from 1000 to 1500 ${\mu}mol$ photon $m^{-2}s^{-1}$. Net photosynthetic rate at light saturation($P_{max}$) of the upper four leaves in SNU-SG1 was much higher and sustained longer throughout grain-filling than HYVs and $F_1$ hybrids. The sustained high photosynthetic competence of SNU-SG1 during grain filling was ascribed to the longer maintenance of high mesophyll conductance that resulted from not only high chlorophyll content and its delayed degradation but also the slow degeneration of photosystem II(PS II) as judged by chlorophyll fluorescence($F_v/F_m$) of flag leaves. $F_1$ hybrids showed slow degeneration of photosystem II similar to the male parent SNU-SG1 while chlorophyll degradation pattern close to female parents, thus exhibiting a little higher $P_{max}$ than female parents. These results suggest that SNU-SG1 has a typical functional stay-green trait that can be utilized for increasing rice yield potential through the improved dry matter production during grain filling.

• Journal of Korean Neurosurgical Society
• /
• 제40권3호
• /
• pp.159-163
• /
• 2006

Objective : Unique Internal carotid artery angiographic findings have been found especially in very poor grade aneurysmal subarachnoid hemorrhage[SAH] patients before and during the endovascular coiling. The author investigates their patterns and classifies them into lour subtypes. Methods : Among Hunt&Hess grade IV, V SAH patients, the author could gather eight patients who showed abnormal intracranial circulation in cerebral catheter-based angiography. Results : The author introduces new term 'misery collaterals' first and has classified them into four types with the case illustrations. Type 1 is the worst condition defined as almost no intracranial circulation. Type 2 is the condition of little intracranial circulation with contrast filling just only at vessels of brain base, type 3 is of no or little cortical circulation with contrast filling at bilateral large vessels of brain base through circle of Willis channel and type 4 is of visible bilateral cortical circulation but delayed intracranial circulation time. The prognosis of these eight patients showed misery collaterals were disappointed. Conclusion : These finding can be used as the supportive information in deciding a management plan in poor grade SAH patients.