• Journal of Information Technology Applications and Management
• /
• v.9 no.3
• /
• pp.113-127
• /
• 2002

The effort for software process improvement is lately surging its interest though it does not satisfy both developer and receiver In terms of low productivity, quality, delay and increasing cost. According to current research, software process improvement contributes to improvement of productivity, its Duality, reduction of development time and cost, and the prediction of the time limit for delivery, which means software process improvement affects competitive advantage among developers. The latest research is whether the investment for information technology substantially had effect on improvement of productivity. That is, software process improvement and maturity of software industries has influence upon economic efficiency and as a result, it plays an important role in whole industries. This research is that how does software process improvement using CMM (Capability Maturity Model) and SPICE (Software Process Improvement and Capability dEtermination) have a effect on factors of software engineering, and how does it have influence upon competitive advantage among SI firms. For this research, reusability, customizability, participation, and review & inspection are set to independent variable and process flexibility and process predictability are set to mediate Variable. Finally, competitive advantage among SI firms Is set to dependent variable. The targets for survey are laborers who work for SI firms. The result of this research is as follows: 1 ) Reusability, Customizability and participation is not rejected but review and Inspection is rejected in process flexibility which has significant level 0.05. 2) Reusability, Customizability and participation is not rejected but review and inspection Is rejected in process predictability which has significant level 0.05. 3) Process flexibility is not rejected and process predictability Is rejected in the competitive advantage of 51 industries which has significant level 0.05

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.11
• /
• pp.25-35
• /
• 2000

A simple two-terminal cyclic current0voltage(I-V) technique was used to measure the current-transients in metal-oxide-semiconductor capacitors. Distinct charging/discharging currents were measured and analyzed as a function of the hold time, the delay time, the gate polarity during the FNT electron injection, the injection fluence and the annealing time after the injection had stopped. The charge-exchange current was distinguished from total current-transients containing the displacement current components. Charging/discharging current caused by the charge exchange was strongly dependent not only on the density of positive charges in the $SiO_2$, but also on the density of interface traps generated during the FNT electron injection. Several tentative mechanisms were suggested.

• Smart Structures and Systems
• /
• v.10 no.3
• /
• pp.229-251
• /
• 2012

Guided waves have shown a great potential for structural health monitoring (SHM) applications. In contrast to traditional non-destructive testing (NDT) methodologies, a key element of SHM approaches is the high process of automation. The monitoring system should decide autonomously whether the host structure is intact or not. A basic requirement for the realization of such a system is that the sensors are permanently installed on the host structure. Thus, baseline measurements become available that can be used for diagnostic purposes, i.e., damage detection, localization, etc. This paper contributes to guided wave-based inspection in anisotropic materials for SHM purposes. Therefore, computational strategies are described for both, the solution of the complex equations for wave propagation analysis in composite materials based on exact elasticity theory and the popular global matrix method, as well as the underlying equations of two active damage localization algorithms for anisotropic structures. The result of the global matrix method is an angular and frequency dependent wave velocity characteristic that is used subsequently in the localization procedures. Numerical simulations and experimental investigations through time-delay measurements are carried out in order to validate the proposed theoretical model. An exemplary case study including the calculation of dispersion curves and damage localization is conducted on an exemplary unidirectional composite structure where the ultrasonic signals processed in the localization step are simulated with the spectral element method. The proposed study demonstrates the capabilities of the proposed algorithms for accurate damage localization in anisotropic structures.

• The Bulletin of The Korean Astronomical Society
• /
• v.35 no.2
• /
• pp.51.1-51.1
• /
• 2010

We report an example of Pi2 pulsation exhibiting different frequency between dawn and dusk. This Pi2 pulsation occurred around 1932 UT on February 14, 2008, and was observed at low-latitude Bohyun (BOH, L = 1.35, MLT = 3.8) and Hermanus (HER, L = 1.83, MLT = 20.1) stations. The pulsation starts simultaneously at both stations but the frequency is higher at BOH than at HER. At the time of the Pi2, THEMIS-A (THA) and THEMIS-D (THD) were on dawn (L = 2.9, MLT = 5.3) and dusk (L = 2.8, MLT = 18), respectively, in the inner magnetosphere. We find a nearly identical waveform and period between THA ${\delta}Bz$ and BOH ${\delta}H$ and between THD ${\delta}Bz$ and HER ${\delta}H$ with a near $0^{\circ}$ phase delay. This observation implies that Pi2-associated fastmode wave in the inner magnetosphere is not excited globally as a single frequency at all longitudes. We suggest that the different frequency between dawn and dusk is due to dawn-dusk asymmetry of the plasmasphere.

• Structural Engineering and Mechanics
• /
• v.65 no.4
• /
• pp.491-504
• /
• 2018

Because of sandwich structures with low weight and high stiffness have much usage in various industries such as civil and aerospace engineering, in this article, buckling and free vibration analyses of coupled micro composite sandwich plates are investigated based on sinusoidal shear deformation (SSDT) and most general strain gradient theories (MGSGT). It is assumed that the sandwich structure rested on an orthotropic elastic foundation and make of four composite face sheets with temperature-dependent material properties that they reinforced by carbon and boron nitride nanotubes and two flexible transversely orthotropic cores. Mathematical formulation is presented using Hamilton's principle and governing equations of motions are derived based on energy approach and applying variation method for simply supported edges under electro-magneto-thermo-mechanical, axial buckling and pre-stresses loadings. In order to predict the effects of various parameters such as material length scale parameter, length to width ratio, length to thickness ratio, thickness of face sheets to core thickness ratio, nanotubes volume fraction, pre-stress load and orthotropic elastic medium on the natural frequencies and critical buckling load of double-bonded micro composite sandwich plates. It is found that orthotropic elastic medium has a special role on the system stability and increasing Winkler and Pasternak constants lead to enhance the natural frequency and critical buckling load of micro plates, while decrease natural frequency and critical buckling load with increasing temperature changes. Also, it is showed that pre-stresses due to help the axial buckling load causes that delay the buckling phenomenon. Moreover, it is concluded that the sandwich structures with orthotropic cores have high stiffness, but because they are not economical, thus it is necessary the sandwich plates reinforce by carbon or boron nitride nanotubes specially, because these nanotubes have important thermal and mechanical properties in comparison of the other reinforcement.

• Journal of KIISE:Information Networking
• /
• v.32 no.1
• /
• pp.80-88
• /
• 2005

In ubiquitous spaces, a user wants to be provided with a VOD service while moving one space to another freely. Since the traditional VOD system is dependent on user location, the VOD server transmits video data to a single client during a session. If the user moves to another space, he/she should close the old session and make a new request for the same video. However, the location-aware VOD system supports user mobility by closing and opening the session automatically. That is, the VOD system automatically perceives the movement of a user and allows the server to change the data flow so that a client near the user can receive the video data. This paper proposes a location-aware VOD service architecture and a session handoff scheme to provide a mobile user with continuous video delivery and implements a location-aware VOD prototype system based on Jini and Java. In experiment, we show that the proposed handoff scheme has a smaller handoff delay than the other handoff scheme.

• Fisheries and Aquatic Sciences
• /
• v.16 no.4
• /
• pp.253-260
• /
• 2013

We investigated the toxicological effects of Aroclor 1254 on the fertilized eggs, embryos and larvae of the olive flounder Paralichthys olivaceus. The survival rate and hatching success of the embryos decreased significantly in treated groups in an Aroclor 1254-dose-dependent manner. Significant differences were found at ${\geq}5{\mu}g/L$ Aroclor 1254 compared to the control group. Hatching success occurred at ${{\leq}}10{\mu}g/L$ Aroclor 1254, which was not significantly different to the control. Embryo malformation increased significantly at ${\geq}1{\mu}g/L$, and included yolk-sac and tail-flexure abnormalities. There was a significant decrease in the survival rate of the larvae at ${\geq}5{\mu}g/L$, which was accompanied by the malformations described above. Notably, concentrations as low as $1{\mu}g/L$ caused a significant increase in abnormalities in the larvae, including incidences of multi-focal hemorrhages, pericardial and yolk-sac edema, inhibition of swim bladder inflation and severe developmental delay. The responses to Aroclor 1254-induced toxicity were generally similar among fertilized eggs, embryos and larvae from three separate flounder hatcheries: Cheju Island, Yeosu and Chungnam, South Korea. These results indicate the high acute toxicity of Arolcor 1254 concentrations of which as low as $1{\mu}g/L$ in olive flounder larvae can affect unhatched embryos. To conclude, the average $LC_{50}$ values for Aroclor 1254 in the embryos and larvae were 50.92 and $3.08{\mu}g/L$, respectively. Additionally, the average $EC_{50}$ values, based on the rate of damage were 14.72 and 5.6$1{\mu}g/L$, respectively.

• Journal of Energy Engineering
• /
• v.16 no.3
• /
• pp.120-127
• /
• 2007

The purpose of this study is experimentally to analyze that the fuel mass fractions of multi-component mixed fuels have an effect on the characteristics of spray ignition and combustion under the ambient conditions of diesel combustion fields. The characteristics of ignition and combustion were investigated by chemiluminescence images and direct photography. The experiments were conducted in the RCEM(rapid compression expansion machine) with optical access. Multi-component fuels mixed with i-octane, n-dodecane and n-hexadecane are injected in RCEM by the electronic control of common rail injector. Experimental conditions set up 42, 72 and 112 MPa in injection pressure, 700, 800 and 900 K in ambient gas temperature. The results show that the ignition delay was dependent on high cetane number. In case of low ambient temperature, the more low boiling point fuels were mixed, the lower luminance regime had a remarkable effect and also shortened diffusion combustion by increasing heat release rate.

• Journal of Sensor Science and Technology
• /
• v.15 no.1
• /
• pp.34-39
• /
• 2006

This study provides the electrical model of combustible catalytic gas sensor. Physical characteristics such as thermal behavior, resistance change were included in this model. The finite element method analysis for sensor device structure showed that the thermal behavior of sensor is expressed in a simple electrical equivalent circuit that consists of a resistor, a capacitor and a current source. This thermal equivalent circuit interfaces with real electrical circuit using two parts. One is 'power to heat' converter. The other is temperature dependent variable resistor. These parts realized with the analog behavior devices of the SPICE library. The gas response tendency was represented from the mass transferring limitation theory and the combustion theory. In this model, Gas concentration that is expressed in voltage at the model, is converted to heat and is flowed to the thermal equivalent circuit. This model is tested in several circuit simulations. The resistance change of device, the delay time due to thermal capacity, the gas responses output voltage that are calculated from SPICE simulations correspond well to real results from measuring in electrical circuits. Also good simulation result can be produced in the more complicated circuit that includes amplifier, bios circiut, buffer part.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.11
• /
• pp.5229-5252
• /
• 2016

With proliferation of diverse network access technologies, users demands are also increasing and service providers are offering a Quality of Service (QoS) to satisfy their customers. In roaming, a mobile node (MN) traverses number of available networks in the heterogeneous wireless networks environment and a single operator is not capable to fulfill the demands of user. It is crucial task for MN for selecting a best network from the list of networks at any time anywhere. A MN undergoes a network selection situation frequently when it is becoming away from the home network. Multiple Attribute Group Decision (MAGD) method will be one of the best ways for selecting target network in heterogeneous wireless networks (4G). MAGD network selection process is predominantly dependent on two steps, i.e., attribute weight, decision maker's (DM's) weight and aggregation of opinion of DMs. This paper proposes Multi-Attribute Intuitionistic Fuzzy Group Decision Method (MAIFGDM) using TOPSIS for the selection of the suitable candidate network. It is scalable and is able to handle any number of networks with large set of attributes. This is a method of lower complexity and is useful for real time applications. It gives more accurate result because it uses Intuitionistic Fuzzy Sets (IFS) with an additional parameter intuitionistic fuzzy index or hesitant degree. MAIFGDM is simulated in MATLAB for its evaluation. A comparative study of MAIFDGM is also made with TOPSIS and Fuzzy-TOPSIS in respect to decision delay. It is observed that MAIFDGM have low values of decision time in comparison to TOPSIS and Fuzzy-TOPSIS methods.