• 터널과지하공간
• /
• 제6권1호
• /
• pp.39-47
• /
• 1996

The results of the regression analysis and comparative study between 120 vibration events by dynamite blasting and 68 vibration events by finecker blasting which were monitored in the test blasting are as follows: The ground vibration velocity of dynamite blasting of 0.12 kg charge weight per delay at 7.4 m above the explosive is higher than that of finecker blasting of 0.96 kg charge weight per delay. In the case of 0.12 kg charge weight per delay, the ground vibration velocity of finecker blasting is equal to 5.5% of that of dynamite blasting at the 10 m distance from explosive. The decrement of ground vibration velocity of dynamite blasting of above 0.12 kg charge weight per delay is larger than that of finecker blasting of below 0.96 kg charge weight per delay. The rate of ground vibration velocity of the finecker blasting to that of dynamite blasting decreases with the distance from explosives, but increases with the decrease of charge weight per delay. The increment of ground vibration velocity of finecker blasting is less than that of dynamite blasting with the increase of charge weight per delay at the same distance from explosives. Under the condition of the constant critical ground vibration velocity or use the same charge weight per delay, the blasting working by finecker rather than by dynamite is able to be performed at the nearer place to structures.

• 화약ㆍ발파
• /
• 제23권3호
• /
• pp.11-18
• /
• 2005

MS 지발 전기뇌관을 사용하는 발파형태에 있어 파형은 거리와 주파수 정도에 따라 인접 단차 간 간섭의 정도가 상이하다. 이 간섭의 정도는 계측지점에서 발파진동의 크기에 영향을 미친다. 본 연구에서는 40ms 간격으로 분리되어 기폭되는 MS 지발 발파의 협동장약 특성을 고찰하고 MS지발 발파에서 발파진동의 협력을 최소화 할 수 있는 주파수에 따른 시차 설계 방법을 제시하였다.

• 화약ㆍ발파
• /
• 제13권4호
• /
• pp.39-46
• /
• 1995

This report was arrangemented and analysed by blasting previous instance of Nocsan, developing area of national factory town in Pusan since 1994. 11. our team have acquired sequential blasting machine which is used at open blasting sites of other countries. The result of study is that follow ; in case of delay electric detonator of Korea, it is possible to use 300 ~600 blasting holes in 2 charge per delay. But in our experience, it is best condition to use 100~200blasting holes at 1 charge per 1 delay.

• 화약ㆍ발파
• /
• 제41권4호
• /
• pp.41-50
• /
• 2023

본 연구에서는 굴착 물량 증대와 발파공해 저감을 위해서 전자뇌관을 이용한 수직방향 더블 데크 공법을 적용하였다. 더블 데크 공법은 상부 데크 발파 후 자유면이 완전히 형성되지 않은 상태에서 하부 데크 발파가 진행되면 발파 효율이 감소할 가능성이 있다. 이와 같은 이유로 더블 데크 공법은 데크 단차에 따라서 발파 효율이 달라진다. 따라서 본 연구에서는 홀 단차의 1~5배를 적용한 4가지 데크 단차를 제안하였고, 발파 후 파쇄도 분석을 통해 발파 효율을 평가하였다. 파쇄도 평가 결과 패턴 4(데크 단차=홀 단차×5)의 파쇄도가 가장 좋았으며, 패턴 3(데크 단차=홀 단차×3) 이상에서 파쇄효율이 큰 폭으로 증가하는 것을 확인할 수 있었다. 이에 따라 수직방향 더블 데크 발파 시 데크 단차는 최소 홀 단차의 3배 이상이 되어야 효율적인 발파 효과를 얻을 수 있다고 분석되었다.

• 화약ㆍ발파
• /
• 제32권3호
• /
• pp.18-25
• /
• 2014

발파에 의한 진동과 소음은 주변 지역에 대하여 인적 물적 피해를 일으킬 수 있는 대표적인 환경피해 요소이다. 본 연구에서는 지연시차를 7단계로 변화시키고 각 단계마다 3회씩 반복하여 총 21회의 발파를 수행하였으며, 총 50개의 측정값으로 환산거리에 의한 발파진동 추정식을 도출하였고, 진동속도 측정값과 주파수를 이용하여 Langefors 시차이론을 적용하였다. 지연시차가 8ms와 28ms일 경우 진동속도의 평균값은 각각 5.76cm/sec 및 5.75cm/sec로 비교적 낮은 값을 나타내었으며, 지연시차에 따라 주기적으로 높은 측정값과 낮은 측정값이 반복되어 간섭효과를 확인할 수 있었다. 진동속도와 주파수의 측정값으로 Langefors의 시차이론을 적용한 결과, 본 연구에서 발파진동을 저감할 수 있는 최적의 지연시차는 8ms와 24ms로 확인되었다.

• 화약ㆍ발파
• /
• 제13권1호
• /
• pp.20-31
• /
• 1995

Many methods and techniques to reduce ground vibrations are well known. Some of them are to adopt electric milisecond detonators with a sequential blasting machine or an initiating system with an adequate number of delay intervals. The types of electric detonators munufactured in Korea include instantaneous, decisecond and milisecond delays byt numbers of delay intervals are only limite from No.1 to No.20 respectively. It is not sufficient to control accurately milisecond time with these detonators in tunnel excavation. Sequential fire time refers to adding an external time delay to a detonators norminal firing time to obtain sequential initiation and it is determined by sequential timer setting. To reduce the vibration level, sequential blasting machine with decisecond detonatore was adopted. A total of 134 blasting was recorded at various sites. Blast-to-structure distances ranged from 20.3 to 42.0 meter, where charge weight varied from 0.25 to 0.75 kg per delay. The results can be summarized as follow : 1. The effects of sequential blasting machine on the vibration level are discussed. The vibration level by S.B.M. are decreased approximately 14.38~18.05 to compare to level of conventional blasting and cycle time per round can be saved. 2. The empirical equations of particle velocity were obtained in S,B.M. and conventional blastin. $V=K(D/W^{1/3})-n$. where the values for n and k are estimated to be 1.665 to 1.710 and 93.59 to 137 respectively. 3. The growth of cracks due to vibrations are found but the level fall to within allowable value.

• Geomechanics and Engineering
• /
• 제15권2호
• /
• pp.745-754
• /
• 2018

In the analysis of the effects of rock tunnel blasting vibration on adjacent existing buildings, the model of simplified equivalent load produces higher calculation result of vibration, due to the lack of consideration of the millisecond delay effect. This paper, based on the static force equivalence principle of blasting load, proposes a new determination method of equivalent load of blasting vibration. The proposed method, based on the elastic-static force equivalence principle of stress wave, equals the blasting loads of several single blastholes in the same section of millisecond blasting to the triangle blasting load curve of the exploded equivalent elastic boundary surface. According to the attenuation law of stress wave, the attenuated equivalent triangle blasting load curve of the equivalent elastic boundary is applied on the tunnel excavation contour surface, obtaining the final applied equivalent load. Taking the millisecond delay time of different sections into account, the time-history curve of equivalent load of the whole section applied on the tunnel excavation contour surface can be obtained. Based on Sailing Tunnel with small spacing on Sanmenxia-Xichuan Expressway, an analysis on the blasting vibration response of the later and early stages of the tunnel construction is carried out through numerical simulation using the proposed equivalent load model considering millisecond delay effect and the simplified equivalent triangle load curve model respectively. The analysis of the numerical results comparing with the field monitoring ones shows that the calculation results obtained from the proposed equivalent load model are closer to the measured ones and more feasible.

• 터널과지하공간
• /
• 제14권2호
• /
• pp.121-132
• /
• 2004

SB 발파에서 지발뇌관의 기폭초시 오차가 암반파괴 과정에 미치는 영향을 고찰하기 위해 기하조건이 다른 발파모델에 순발뇌관, 전자뇌관 그리고 DS뇌관의 기폭초시 오차를 고려하여 SB 발파에서의 암석파괴과정 해석을 수행하였다. 또한 전자 및 DS지발뇌관을 사용한 SB발파의 발파효과와 영향인자를 고찰하기 위해서 해석결과를 통계적으로 분석하였다.

• 화약ㆍ발파
• /
• 제16권3호
• /
• pp.16-24
• /
• 1998

Methods of Rock fragmentation are used rock of housing repair development at KU-SAN DONG area in seoul Youn-Pyong Ku. So, Theorical analyses of the effect of vibration and frequency on structural damage around old housed also discussed. The results can be summarized as follows: 1. A area(Rock area not more than 15m Ku-San Mention) Some Empirical equations were obtained $V=K\{{\frac{D}{W}}1/3\}^{-n}$ where the values for n and K are estimated to be -1.64 and 94 respectively, this values were obtained only theorical analyses. If we have 125g charge this area is impossible blasting operation, so this area must be worked by SRS(Super Rock Splitter) method. 2. B area(Rock area from 15m to 25m in a boundary line from Ku-San Mention) This area charge is about 125g in a delay time by some empirical equation s. So, this area can be blasting operations by small charge. 3. C area(Rock area from 25m to 35m in a boundary line from Ku-San Mention) This area charge is about 500g in delay time by some empirical equation s. So, this area can be blasting operations by middle charge. 4. D area(Rock area more then 35m in a boundary line from Ku-San Mention) This area charge is about 1000g in a delay time by some empirical equation s. So, this area can be blasting operations by middle charge.

• 화약ㆍ발파
• /
• 제32권3호
• /
• pp.10-17
• /
• 2014

본 연구에서는 2자유면을 가진 암반의 장공발파 시 천공간격과 뇌관의 기폭시차에 따라 발생되는 내부주변형률의 변화를 확인하기 위하여 Visual FEA 유한요소 프로그램으로 해석 암반의 단면을 모델링하여 인접공균열권 내의 주요 절점에서 최대주변형률을 분석하였다. 결과적으로, 장공발파 시 천공간격이 좁고 기폭시차가 길수록 인접공 균열권 내에 미치는 최대주변형률 값이 크게 나타났고, 장약장 내 폭약의 기폭 위치에 따라 최대 주변형률의 차이를 보였다.