• Journal of Positioning, Navigation, and Timing
• /
• v.12 no.3
• /
• pp.237-244
• /
• 2023

A signal generation simulator is an economical and useful solution in Global Navigation Satellite System (GNSS) receiver design and testing. A software-defined radio approach is widely used both in receivers and simulators, and its flexible structure to adopt to new signals is ideally suited to the testing of a receiver and signal processing algorithm in the signal design phase of a new satellite-based navigation system before the deployment of satellites in space. The generation of highly accurate delayed sampled codes is essential for generating signals in the simulator, where its sampling rate should be chosen to satisfy constraints such as Nyquist criteria and integer and non-commensurate properties in order not to cause any distortion of original signals. A high sampling rate increases the accuracy of code delay, but decreases the computational efficiency as well, and vice versa. Therefore, the selected sampling rate should be as low as possible while maintaining a certain level of code delay accuracy. This paper presents the lower limits of the sampling rate for GNSS signal generation simulators. In the simulation, two distinct code generation methods depending on the sampling position are evaluated in terms of accuracy versus computational efficiency to show the lower limit of the sampling rate for several GNSS signals.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.1
• /
• pp.104-115
• /
• 1997

This paper investigates PN code acquistion algorithm and demodulation performance of the RAKE receiver in the DS/CDMA(direct sequence code division multiple access) sysytems under a multipath fading channel with multiusers. To speed up the acquisition process, PN matched filter is applied and postdetection integration technique comable withthe dynamic threshold set method is proposed. the Maximum-Likelihood algorithmin serial fashion is able to find PN code delay estimates for the RAKE branches using sliding window in a multipath fading channel. The correct acquistion probability and mean acquistion time are used as a performance measure of the system using the Monte Carlo method. The performance of the RAKEreceiver, afte the code acquisition is achieved is the CDMA systems, is also investigated for three major combining techniques.

• Proceedings of the IEEK Conference
• /
• 2000.07a
• /
• pp.501-504
• /
• 2000

In this paper, performance of a pseudonoise (PN) code tracking loop is analyzed and simulated for a direct-sequence/code-division multiple access ( DS/CDMA) system with imperfect power control in a multipath fading channel. A noncoherent first-order delay-locked loop (DLL) is considered as a PN code tracking loop. Power control error is modeled as a log-normally distributed random variable. From the simulation results, it is shown that for smaller discriminator offset, tracking jitter performance is improved while MTLL performance is degraded. It is shown that large power control error and heavy shadowing substantially degrade the PN tracking performance. The analysis in this paper can be applicable to design of PN code tracking loop for a DS/CDMA system.

• Journal of Satellite, Information and Communications
• /
• v.5 no.1
• /
• pp.54-57
• /
• 2010

The navigation system like GPS which is core technology is based on Code Division Multiple Access(CDMA) techniques. To receive satellite signal smoothly in CDMA, received signals have to synchronize with spread code. In this paper, we focus on the code tracking methods among synchronization techniques. The conventional delay lock loop(DLL) is unsuitable for multi-path channel. We will introduce how it overcomes distortion by multi-path. We will propose method that separates out multi-path signals and tracks the each path signals. And we will confirm performance of proposed method using Spirent simulator.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.1
• /
• pp.774-777
• /
• 2005

In this paper, we propose performance improvement algorithm for high data rate wireless personal area network (HDR-WPAN) system using turbo code. Turbo code increase detection delay and computation according to iterate counts. However, turbo code has been shown to be very close th the Shanon limit, can be classified as a block-based error correction code. Turbo code has gain about E$_b$/N$_o$=5.8dB at 10$^{-4}$ in the multipath indoor channel. In the result, HDR-WPAN system adopted turbo code has reliable communication by low power.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.299-302
• /
• 2010

Recently, the malicious code is not easily detectable in the vaccine for the virus, malicious code as a compressed file by modulation pattern is the tendency to delay. Among the many antivirus engines on the market a compressed file that can be modulated by malicious code, and test whether the pattern will need to know. We cover a multi-compressed files, malicious code modulated secreted by examining patterns of test engine is being detected is through a computer simulation. Analysis of secreted activities of malicious code and infect the host file tampering with the system driver files and registry, it gets registered is analyzed. this study will contribute hidden malicious code inspection and enhance vaccine efficacy in reducing the damage caused by malicious code.

• Journal of Satellite, Information and Communications
• /
• v.4 no.2
• /
• pp.39-45
• /
• 2009

This paper proposes the specific code synchronization technique for DS-SS(Direct Sequence-Spread Spectrum transmission in the DVB-RCS +M standard. DS-SS is better than multi-carrier transmission method under nonlinear channel but imposes a long acquisition time. To improve the synchronization aspect, the robust correlation structure is introduced for acquisition and the nonlinear delay lock loop is done for tracking. MAT(Mean Acquisition Time) performances is shown to validate its superiority. In addition, code tracking and jitter performances are done when code tracking algorithm based on 2 oversamples which is not influenced by sampling clock timing offset and carrier freq. offset is used.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.4
• /
• pp.724-730
• /
• 2017

SpaceWire invented for spacecrafts has Time-Code defined for time synchronization over SpaceWire network. A Time-Code suffers transmission delay of 14[bit-period] and jitter up to 10[bit-period] whenever it passes through a SpaceWire link, which is the primary cause of time synchronization error. This work presents a simple method to improve the time synchronization which uses two extended Time-Codes. Nodes on a SpaceWire network can find how much delay and jitter a received Time-Code has suffered while it passes through the network, and they can correct time synchronization error with this information. The proposed method was validated in a simulation environment developed based on OMNeT++. The simulation result showed that time synchronization error less than a few bit-periods can be achieved. The proposed method is cost effective and suitable for small-scale SpaceWire network systems.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2000.12a
• /
• pp.13-16
• /
• 2000

In the recent mobile communication systems, the performance of Turbo Code using the error correction coding depends on the interleaver influencing the free distance determination and the recursive decoding algorithms that is executed in the turbo decoder. However, performance depends on the interleaver depth that need great many delay over the reception process. Moreover, Turbo Code has been known as the robust coding methods with the confidence over the fading channel. The International Telecommunication Union(ITU) has recently adopted as the standardization of the channel coding over the third generation mobile communications the same as IMT-2000. Therefore, in this paper, we proposed of that has the better performance than existing Turbo Decoder that has the parallel concatenated four-step structure using MAP algorithm. In the real-time voice and video service over the third generation mobile communications, the performance of the proposed method was analyzed by the reduced decoding delay using the variable decoding method by computer simulation over AWGN and lading channels.