• Restorative Dentistry and Endodontics
• /
• v.23 no.1
• /
• pp.296-303
• /
• 1998

The purpose of this study was to assess the effects of cavity designs on the marginal leakage of class 5 glass ionomer restorations. The five cavity designs were as follows ; notch shape(A group), notch shape with groove(B group), combined lesion(C group), combined lesion with groove and deep chamfer margin(D group) and combined lesion with groove and shoulder(E group), and each design had 10 cavities. After the cavities were restored with GIC, they were immersed in 0.5% basic fuchsin solution for 6 hours. The specimens were washed thoroughly and sectioned longitudinally in a buccolingual direction through the center of the restorations. The degree of marginal leakage was measured as the extent of dye penetration under the stereoscope. The results of this study were as follows 1. The enamel margins of all groups showed lesser leakage than dentin/cementum margins(p<0.05). 2. The combined lesion(C group) showed more leakage than notch shape(A group), but there was no siginificant difference(p>0.05). 3. In the notch shape, there was no influence on the marginal leakage by the groove preparation. 4. In the combined lesion, marginal leakage was decreased by the groove preparation and marginal modification.

• The Research Journal of the Costume Culture
• /
• v.11 no.3
• /
• pp.375-386
• /
• 2003

The purpose of this study is to seek the change of body surface according to cycling motions and to give suggestions to the pattern and spare space between body and wear in each bodily parts to be heavily considered for making the bicycle wear. The cycling motions were analyzed by taking the sequential pictures of cycling covering motion by a digital camera. The experiments with gypsum were toward a woman in her twenties. We draw the line standard of the body's surface, separated their gypsum-replicated fragments of body's surface following the analyses of the change in their lengths. As the motions were made, we decided the degree of the changed length as spare space when compared the erected posture with the cycling posture, presenting the pattern of the cycling wear with the preparation of wears for testing. After that, the essential experiments were conducted toward three cycle players wore our experimental wears. Regards their evaluated appearance, evaluations over three points were obtained from all parameters except the width of front armhole. Accordingly, our experimental wears were remarkably understood as a relatively proper wear as bicycle wear.

• Restorative Dentistry and Endodontics
• /
• v.13 no.1
• /
• pp.151-158
• /
• 1988

The purpose of this study was to evaluate the effect of canal filling methods and post-space preparation time on the apical seal of endodontically treated teeth. Seventy-six single-rooted human teeth were divided into 6 groups and each tooth was obturated and prepared post-space according to the purpose of this study. After all specimens were immersed in Indian ink, decalcified and cleared, the degree of dye penetration into the root canals observed by magnifying glass (X20) and measured by caliper. The results were as follows: 1. In the thermatic condensation, no significant difference in ink penetration occured when the post-spaces were created immediately after obturation or when they were made a week later. 2. In the lateral condensation, no significant difference in ink penetration existed between teeth whose post-space were prepared immediately or delayed. 3. In comparison of experimental groups and control groups, no significant difference showed when the groups were obturated with McSpadden compactor but when the teeth were laterally condensed, the experimental groups showed less ink penetration than controls. 4. Thermatic condensed teeth with McSpadden compactor were less ink penetration thn laterally condensed teeth.

• Preventive Nutrition and Food Science
• /
• v.20 no.3
• /
• pp.183-189
• /
• 2015

In the present study, an optimum protease was selected to hydrolyze the egg white liquid protein for the antioxidant peptides. Alcalase treatment yielded the highest amount of ${\alpha}$-amino groups (15.27 mg/mL), while the control (no enzymatic hydrolysis) showed the lowest amount of ${\alpha}$-amino groups (1.53 mg/mL). Alcalase also gave the highest degree of hydrolysis (DH) value (43.2%) and was more efficient for egg white liquid hydrolysis than the other enzymes. The Alcalase hydrolysate had the highest radical-scavenging activity (82.5%) at a concentration of 5.0 mg/mL. The conditions for enzymatic hydrolysis of egg white liquid with Alcalase were selected as substrate : water ratio of 2:1. Five percent Alacalse treatment did not show significant (P>0.05) increases of DH and ${\alpha}$-amino nitrogen content after 24 hhydrolysis. Thirty two hour-hydrolysis with 5% Alcalase is sufficient to make antioxidative egg white liquid hydrolysate from egg white liquid. DPPH and ABTS radical-scavenging activities were significantly (P<0.05) higher after enzymatic digestion. These results suggest that active peptides released from egg-white protein are effective radical-scavengers. Thus, this approach may be useful for the preparation of potent antioxidant products.

• Journal of the Korean Wood Science and Technology
• /
• v.22 no.2
• /
• pp.30-36
• /
• 1994

Steam explosion process is one of the most efficient, pretreatment method for the utilization of lignocellulosic biomass. The carbxymethyl-cellulose(CMC) was prepared with steam exploded wood(EXW), pine(Pinus densiflora) and oak(Quercus mongolica), by standard method using isopropyl alcohol and monochloroacetic acid. The range of water solubility of carboxymethylated pine exploded wood was 45.2~66.8 % and those of oak was 60.7~84.7 %. The degree of substitution(D.S) of carboxymethylated pine exploded wood was 0.11~0.33 and oak exploded wood was 0.48~0.76. The color of carboxymethylated pine and oak exploded wood was brown-black. When carboxymethylated EXW was purified by sulfuric acid, the yield of carboxymethylated wood was lower than non-treated one. However, the color was still brown-black although after delignification. In carboxymethylated EXM prepared after delignification, the water solubility and degree of substitution(D.S) of pine were 81.4~95.9 % and 0.71~0.79, and those of oak were 76.2~89.5 % and 0.79~1.05. The values were higher than non-treated. The degree of substitution of purified carboxymethylated wood prepared with delignified EXM, pine and oak were 0.50~0.71 and 0.70~0.88. The color of carboxymethylated wood was white. In carboxymethylated wood preparde after delignification of EXM, swelling ratio and water retention value of pine were 95.9~96.5 and 580.0~751.2, those of oak were 76.2~89.5 and 124.3~307.6.

• Korean Journal of Materials Research
• /
• v.22 no.5
• /
• pp.227-236
• /
• 2012

Ionomer is a thermoplastic that is composed of covalent bonds and ionic bonds. It is possible to use this material in processes such as injection molding or extrusion molding due to the material's high oil resistance, weatherproof characteristics, and shock resistance. In this study, a new ionomer having a multifunctional group was prepared by a stepwise neutralization system with the addition of acidic and salt additives. In step I, to increase the contents of the multifunctional group and the acid degree in ethylene acrylic acid (EAA), MGA was added to the ionomer resin (EAA). A new ionomer was prepared via the traditional preparation method of the ionic cross-linking process. In step II, metal salt was added to the mixture of EAA and MGA. The extrusion process was performed using a twin extruder (L/D = 40, size : ${\varphi}30$). Ionomer film was prepared for evaluation of gas permeability by using the compression molding process. The degree of neutralized and ionic cross-linked new ionomer was confirmed by FT-IR and XRD analysis. In order to estimate the neutralization of the new ionomer film, various properties such as gas permeation and mechanical properties were measured. The physical strength and anti-scratch property of the new ionomer were improved with increase of the neutralization degree. The gas barrier property of the new ionomer was improved through the introduction of an ionic site. Also, the ionic degree of cross-linking and gas barrier property of the ionomer membrane prepared by stepwise neutralization were increased.

• Journal of the Korean Ceramic Society
• /
• v.36 no.7
• /
• pp.698-704
• /
• 1999

Li rich Li1+xMn2-xO4(x=0.07) spinel powders were prepared by an oxalate precipitation of wet chemical methods at temperature lower than $600^{\circ}C$. The FTIR results showed that the powders prepared at $600^{\circ}C$ had high degree of crystal quality comparing with the spinel powders prepared by solid state reaction at 75$0^{\circ}C$ which was the lowest synthesis temperature of the solid state reaction method. The particle size of powders prepared by the oxalate precipitation at $600^{\circ}C$ was smaller than 0.2${\mu}{\textrm}{m}$ and the specific surface area was 11.01 m2/g A heat treatment over 90$0^{\circ}C$ formed second phase in the precipitates. It was shown that there were phase transitions at temperatures. T1,T2 and T2. The transitions involved weight loss and gain during heating and cooling. The low temperature synthesis below $600^{\circ}C$ avoided the second phase formation and the prepared powders showed improved compositional and physical properties for secondary lithium battery applications.

• Korean Journal of Food Science and Technology
• /
• v.15 no.2
• /
• pp.155-159
• /
• 1983

Alpha-barley were prepared by means of soaking, heating, and drying treatment. The degree of gelatinization ${\alpha}-barley$ were determined. The yield of ${\alpha}-barley$ prepared by microwave heating, steaming, and autoclaving were in the range of 95-98%, whereas by boiling, only 74-89% of ${\alpha}-barley$ were obtained. The degree of gelatinization of ${\alpha}-barley$ prepared by 5 min microwave heating and 10 min and 20 min steaming were around 90%. Alpha-barley prepared by boiling, autoclaving and 30 min steaming showed above 95% of degree of gelatinization.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.4 no.1
• /
• pp.21-33
• /
• 1998

This Evaluation was made through 300 persons who had attended the lecture organized by O. M. P. T. (Orthopeadic Manual Physical Therapy) during the period of January to June 1998 in Seoul and in other six(6) cities. The result of evaluation is summarized as follows : 1. With regard to general satisfaction with lecture, it was evaluated as 'more than good 'by 204 person(68.0%) for 'Preparation for lecture of lecturer' and by 194 person (64.7%) for 'Teaching Method'. Statistically, the significance was largely given to 'Place and Preparation for Lecture of Lecturer' and 'Preparation for Lecture as per each Lecturer' (P< 0.001). 2. With regard to understanding of lecture, it was evaluated as 'more then good' by 190 persons(63.3%) for 'Appropriate Teaching Hours' and by 149 persons(49.7%) for 'Appropriate Degree of Lecture Difficulties'. Statistically, the significance was largely given to 'Lecturer and Appropriateness of Teaching Hours' (P< 0.05) and 'Appropriateness of Teaching Courses and Degree of Lecture Difficulties' (P< 0.01). 3. With regard to satisfaction with lecture's performance, it was evaluated as 'more than good' by 194 persons(64.7%) for 'Lecturer's Zeal for Teaching' and by 198 persons(66.8%) for 'Suitability of Textbook'. Statistically, the significance was largely given to 'Sex Distinction and Lectuer's Zeal for Teaching' (P< 0.01) and 'Lecturer and Suitability of Textbook' (P< 0.05). 4. With regard to teaching environment, it was evaluated as 'more than good' by 102 persons(37.4%) for 'Appropriateness of Teaching Environment' and by 193 persons(64.3%) for 'Provision of Appropriate Audio-Visual Aids for Teaching'. Statistically, the significance was largely given to 'Place and Appropriateness of audio-visual aids for Teaching' (P<0.05). 5. With regard to parctical use of lecture, it was evaluated as 'more than good' by 172 persons(54.7%) for 'Usefulness to clinical demonstration' and by 209 person(69.6%) for 'Attitude towards study'. With the result of evaluation made as in the above, we are able to see that the education of orthopedic physical therapy which is organized by Orthpedic Physical Therapy Society of Korea, is being successfully conducted and evaluated by its members, and furthermore the staff of this society has to make his best endeavoures for the growth of this society and for the development of this education.

• Quality Improvement in Health Care
• /
• v.8 no.2
• /
• pp.160-171
• /
• 2001

Background : This study was conducted to compare the level of satisfaction between mothers who were educated on the care of newborns by video-taped method and those by verbal one before discharge. Methods : Fifty-two mother (verbal method group) from a free standing OB & GY hospital in Wonju City and forty-seven mothers (videotaped method group) from the OB & GY section of Wonju Christian Hospital(WCH) were selected for a study sample. The knowledge and understanding of newborn care and the degree of maternal satisfaction were assessed after the education by self-administered questionnaires. The opinions of the 11 nurses of WCH who were involved in the education were also collected by a questionnaire. Results : With respect of the level of understanding and satisfaction with the discharge education on newborn care, there is no significant difference between the videotaped educated group and verbal educated one. The correlation analysis of the video education group revealed a strong correlation between the score of understanding and satisfaction with the discharge preparation(r=0.409, p=0.01), and between the satisfaction scores for discharge preparation and discharge education(r=0.844, p=0.001). As for the verbal education group, the score of understanding also correlated significantly with both the score of satisfaction with the discharge education(r=0.272, p=0.001) and the discharge preparation(r=.680, p=0.001). Conclusions : This study showed that the discharge education to mothers regarding newborn care by a videotaped method does not improve the understanding or satisfaction of the mothers. However, the response to the mode of discharge education varies by the characteristics of the mothers. In conclusion, the characteristics of the mother should be considered in order to improve the understanding and knowledge of newborn care when the mode discharge education is chosen.