• 천문학회보
• /
• 제46권1호
• /
• pp.45.2-46
• /
• 2021

The Hayabusa 2 mission target asteroid (162173) Ryugu is a near-Earth, carbonaceous (C-type) asteroid. Before the arrival, this asteroid is expected to be covered with mm- to cm- sized grains through the thermal infrared observations [1]. These grains are widely understood to be formed by past impacts with other celestial bodies and fractures induced by thermal fatigue [2]. However, the close-up images by the MASCOT lander showed lumpy boulders but no abundant fine grains [3]. Morota et al. suggested that there would be submillimeter particles on the top of these boulders but not resolved by Hayabusa 2's onboard instruments [4]. Hence, we conducted polarimetry of Ryugu to investigate microscopic grain sizes on its surface. Polarimetry is a powerful tool to estimate physical properties such as albedo and grain size. Especially, it is known that the maximum polarization degree (Pmax) and the geometric albedo (pV) show an empirical relationship depending on surface grain sizes [5]. We observed Ryugu from UT 2020 November 30 to December 10 at large phase angles (ranging from 78.5 to 89.7 degrees) to derive Pmax. We modified TRIPOL (Triple Range Imager and POLarimeter, [6]) to attach to the 1.8-m telescope at the Bohyunsan Optical Astronomy Observatory (BOAO). With this instrument, we observed the asteroid and determined linear polarization degrees at the Rc-band filter. We obtained sufficient data sets from 7 nights at this observatory to determine the Pmax value, and collaborated with other observatories in Japan (i.e., Hokkaido University, Higashi-Hiroshima, and Nishi-Harima) to acquire linear polarization degrees of the asteroid from total 24 nights observations with large phase angle coverage (From 28 to 104 degrees). The observational results have been published in Kuroda et al. (2021) [7]. We thus found the dominance of submillimeter particles on the surface of Ryugu from the comparison with other meteorite samples from the campaign observation. In this presentation, we report our activity to modify the TRIPOL for the 1.8-m telescope and the polarimetric performance. We also examine the rotational variability of the polarization degree using the TRIPOL data.

• 대한화상학회지
• /
• 제23권2호
• /
• pp.54-59
• /
• 2020

Purpose: A fourth degree burn is a full-thickness burn of the skin usually accompanied by damage to deep structures and commonly results in extensive damage to surrounding tissues which makes the treatment of the wound difficult. Coverage of these wound using free flap is known to effective but not commonly used. The purpose of our study is to review our experience and suggest early application of free flap surgery. Methods: A retrospective review was performed from 2010 to 2019, on a total of 34 fourth degree burn patients undergone free flap surgery as primary treatment in our hospital. We reviewed the location of the injury, etiology, TBSA (%), Presence of osteomyelitis, flap choice, complications, period of injury to surgery and healing. Results: Using free flap as a primary reconstrcuction, the outcome is satisfactory. The treatment period was shortened, and there was less loss of function due to complications. Also the incidence of osteomyelitis and amputation was significantly low. Conclusion: Applying free flap surgery as soon as possible in fourth degree burns is effective, such as reducing complications such as infection, reducing amputation, shortening treatment period, and preventing severe sequelae.

• 대한치과보철학회지
• /
• 제21권1호
• /
• pp.67-72
• /
• 1983

Path of insertion(1) can be defined that the direction of movement of an appliance from the point of initial contact of its rigid parts with the supporting teeth to the place of final rest. Krol(2) described that in the conventional path of insertion, all the rests are seated more or less simultaneously but in the use of the rotational path one segment of the partial denture is seated first then the remainder of the prosthesis is rotated into position. The rotational path of insertion is limited primarily to the tooth borne prosthesis. Its great advantages are the elimination of anterior clasps to improve ethetic and reduction of tooth coverage to minimize plaque accumulation. Either a rigid minor connector or proximal plate provides retention through its intimate contact with a proximal tooth surface below the height of contour as indicated at a o-degree tilt. A specially designed rest in conjunction with this retentive component satisfies the basic requirements of clasp design. The purpose of this study was a clinical evaluation of rotational path removable partial dentures. Author delivered rotational path removable partial dentures to three different cases of patients and evaluated function of the dentures, difficulties of removal and insertion of the dentures and supporting structures of the abutment teeth by means of clinical and X-ray examinations for eighteen months. According to the examination data author came to the conclusion that the prognosis of the rotational path removable partial dentures was excellent.

• 한국항해학회지
• /
• 제3권1호
• /
• pp.47-77
• /
• 1979

A microwave Navigational Aid system is suggested suitable for fishing boats too small to be equipped with Radar or Radio-Direction-Finder. The system proposed here is similar to that of Talking-Beacon developed in Japan, but the distinctive modification proposed is that an increase of sixteen times in peak transmitting power, thus an accompanying increase of coverage, is achieved with the same mean transmitting power as that of Japan without sacrificing the clearness of azimuth information, by adopting a pulse repetition modulation instead of pulse width modulation as in Japan system. An experimental land station transmitter of transmitting frequency of 9, 370MHz and of peak power of 35kw with a microwave beam of 1 degree in horizontal width and 7 degrees in vertical width rotating once every three minutes, and also an experimental receiver of 20-dB in sensitivity and of an assumed cost of 100 dollars, operated by a 12 volts battery source are made, and the sail test results are reported showing that a bearing infromation of an accuracy of within two degrees can be obtainable every three minutes at a distance of as far as 24 miles from the transmitter if the transmitter is located as high as 100 meters above sea-level.

• 국제학술발표논문집
• /
• The 7th International Conference on Construction Engineering and Project Management Summit Forum on Sustainable Construction and Management
• /
• pp.42-51
• /
• 2017

Due to the high degree of mechanization and the good environmental benefits, the prefabricated buildings are being promoted in China. The construction site layout of the prefabricated buildings has important influence on its safety benefit. However, few scholars have studied the safety problem on it. Firstly, in order to give a follow-up study foreshadowing the characteristics of prefabricated buildings are analyzed, the research assumptions are given and three types of safety buffers are established. And then a mult-objective model for the prefabricated buildings site layout is presented: taking into account the limits of noise, the coverage of the tower crane and the possibility of exceeding boundaries and overlapping, the constraints are and designed established respectively; Based on the improved System Layout Planning (SLP) method, the efficiency\cost\safety interaction matrices among the facilities are also founded for objective function. For the sake of convenience, a hypothetical facility layout case of the prefabricated building is used, the optimal solution of that is obtained in MATLAB with particle swarm algorithm (PSO), which proves the effectiveness of the model presented in this paper.

• 농촌계획
• /
• 제14권3호
• /
• pp.53-61
• /
• 2008

This study has intended to elicit the definition of rural landscape, to classify rural landscape type, and to develop the evaluation indicators of rural landscape, meeting the definition through delphi expert survey method. The survey was performed five times for 80 days by 20 experts. The delphi expert survey asked experts as follows: 1) to fill out open-ended questions regarding the definition of rural landscape, and classification of rural landscape types, and evaluation indicators; 2) to provide their own feasibility evaluation regarding the results of the previous answer; and 3) to reevaluate the feasibility of the definition, types, and indicators. Based on the survey results, this study has found the appropriate definition of rural landscape like the comprehensive complex of physical (objective) and nonphysical (subjective) factors characterizing natural and/or artificial scenary of rural village itself Also, this study has developed the evaluation indicators of rural landscape in accordance with space types and landscape units classified. The developed indicators included areal ratio, the degree of green naturality, the building coverage ratio for physical landscape field, and skyline, landscape adjectives, color landscape, semantic scale.

• 한국환경복원기술학회지
• /
• 제16권4호
• /
• pp.41-52
• /
• 2013

This study was carried out in order to analyze the succession characteristics of the slope of expressways and the results of analysis by collecting and analyzing various literatures and data from 2011 to 2012 and surveying 75 expressway slope, as follows : The construction methods applied to planting the slope of an expressway can be classified into 4 types including 3 Climber planting methods, 8 Vegetation thick-layer spray work methods, 4 Seed spray work methods, and 4 Stabilization work methods. The factors which affect the cover degree of the slope of an expressway were found to be development years, gradient, length, and azimuth. Like surrounding forest areas, the expressway slope was analyzed to begin the plant succession 20, 30, and 40 years after development, and plant succession was developed in diversity in a mixed stand forest according to surrounding forest floors. Species diversity, maximum species diversity, and the evenness of slope facing north were analyzed to be high comparing to those facing east, west, and south according to azimuth of slope. Species diversity, maximum species diversity, evenness of slope, and the plant succession of surroundings were analyzed to be high when the gradient of the slope was less than $40^{\circ}$. The dominant species which success on the slope of an expressway and its surrounding forest area included Miscanthus sinensis var. purpurascens, Zoysia japonica, Pinus thunbergii Parl, Rubus crataegifolius, Lespedeza cyrtobotrya, Amorpha fruticosa, Artemisia princeps var. orientalis, and Oenothera biennis.

• Bulletin of the Korean Chemical Society
• /
• 제34권11호
• /
• pp.3312-3316
• /
• 2013

Single crystals of hexagonal graphenes were successfully grown on Cu foils using the atmospheric pressure chemical vapor deposition (CVD) method. We investigated the effects of reaction parameters, such as the growth temperature and annealing time, on the size, coverage, and density of graphene domains grown over Cu foil. The mean size of the graphene domains increased significantly with increases in both the growth temperature and annealing time, and similar phenomena were observed in graphene domains grown by low pressure CVD over Cu foil. From the comparison of micro Raman spectroscopy in the graphene films grown with different annealing times, we found that the nucleation and growth of the domains were strongly dependent on the annealing time and growth temperature. Therefore, we confirmed that when reaction time was same, the number of layers and the degree of defects in the synthesized graphene films both decreased as the annealing time increased.

• 보험의학회지
• /
• 제27권2호
• /
• pp.85-95
• /
• 2008

When an insurance company receives an application for life or health insurance, the company must evaluate the degree of risk the individual for insurance coverage presents before the company agrees to issue the policy. A medical factor is a physical or psychological characteristic that may increases a hazard. A financial factor is financial information that is taken into account by underwriter to determine if a person is applying for more than he/she reasonably needs or can afford. A personal factor is a lifestyle choice. There are several medical risk selection systems in Korean life insurance market. They are attending physician's statement, direct examination by insurance doctors, and paramedic examination. However there is some dissatisfaction of current system. It is possible that cooperation of part-time insurance doctors system may be one of useful system of medical risk selection. Improvement of medical risk selection system will be an important matter of profitability of insurance company and it will contribute to sound life insurance system.

• The Journal of Asian Finance, Economics and Business
• /
• 제10권1호
• /
• pp.157-167
• /
• 2023

The purpose of this research was to determine the degree to which Small-to-Medium Enterprise (SME) owners and operators in Mountain Province were willing to take on financial risk to invest in the capital markets as a potential additional source of income, as well as the extent to which these five indicator variables-particularly their income, expenses, financial goals, liquid cash, and insurance coverage-were influenced by demographic factors. The study used a quantitative approach and employed a descriptive survey research method. The results show that the SME Owners and Operators in Mountain Province have minimal knowledge of capital market investments which makes them moderate investors with a neutral level of financial risk tolerance toward capital market investment. Their marital status, net income, and educational attainment significantly influence their financial risk tolerance level. The respondents also believe that engaging in the capital markets will grow their businesses. Further, the extent of influence of Income, Expenses, Liquid Cash, and Insurance Cover on the financial risk tolerance of the SME owners and operators in Mountain Province a great extent; thus, making them careful in investing in the capital markets, and it is primarily affected by their Net Income. Consequently, the financial goals of SME owners and operators in Mountain Province have a vital role in their financial risk tolerance level.