• 한국막학회:학술대회논문집
• /
• 한국막학회 1999년도 The 7th Summer Workshop of the Membrane Society of Korea
• /
• pp.83-86
• /
• 1999

The imidization effect of a poly (amic acid) dope solution on membrane formation has been investigated. Poly (amic acid) solution in S-methyl-2-pyrrolidione hs been thermally imidized at $120^{\circ}C$ with different curing time and its degree of imidization was determined by infrared spectroscopy. The solution properties have been studied as a function of concentration and curing time by dynamic light scattering. The quality of a solvent was changed from good to poor with increasing imidization of poly(amic acid).The reduced polymer-solvent interaction diminishes the membrane formation time. The morphology of a membrane was able to be controlled by the characteristics of dope solution.

• Macromolecular Research
• /
• 제14권3호
• /
• pp.318-323
• /
• 2006

We investigated the rheological behaviors and orientation of three different types of layered silicate composite systems under external flow: microcomposite, intercalated and exfoliated nanocomposites. Rheological measurements under shear and uniaxial extensional flows, two-dimensional, small-angle X-ray scattering and transmission electron microscopy were conducted to investigate the properties, as well as nano- and micro-structural changes, of polymer/layered silicate nanocomposites. The preferred orientation of the silicate layers to the flow direction was observed under uniaxial extensional flow for both intercalated and exfoliated systems, while the strain hardening behavior was observed only in the exfoliated systems. The degree of compatibility between the polymer matrix and clay determined the microstructure of polymer/clay composites, strain hardening behavior and spatial orientation of the clays under extensional flow.

• 반도체디스플레이기술학회지
• /
• 제22권4호
• /
• pp.1-6
• /
• 2023

In CO₂ laser surface machining of plastic films in modern display manufacturing, scattering of fume particles could be a major source of well-recognized film surface contamination. This computational fluid dynamics research investigates the suction air flow patterns over a film surface as well as the dispersion of micron-sized fume particles with low-Reynolds number particle drag model. The numerical results show the recirculatory flow patterns near laser machining point on film surface and also over the surface of vertical suction slot, which may hinder the efficient removal of fume particles from film surface. The dispersion characteristics of fume particles with various particle size have been tested systematically under different levels of suction flow intensity. It is found that suction removal efficiency of fume particles heavily depends on the particle size in highly nonlinear manners and a higher degree of suction does not always results in more efficient particle removal.

• 대한수의학회지
• /
• 제19권1호
• /
• pp.23-26
• /
• 1979

In order to compare the effects of epinephrine, cortisone or insulin on the hepatic storage of triglycerides, the fatty liver was induced in mice by the subcutaneous injection for 30 days of either epinephrine, cortisone or insulin. The morphological characteristics of fatty liver in relation to the inducing agents was observed with the following results. 1. The fatty liver induced by epinephrine or cortisone was characterized by the centrilobular accumulation of triglycerides although the degree of accumulation by epinephrine appeared to be much higher than that by cortisone. 2. The fatty liver produced by insulin, however, was characterized by the infiltration of small-sized lipid droplets scattering all over the hepatic lobules.

• 설비공학논문집
• /
• 제3권1호
• /
• pp.34-41
• /
• 1991

The effect of flow conditions on flow measurement is difficult to identify from the inherent characteristics of the flowmeters and flow standard system. A new experimental approach has been attempted to detect the turbine meter error due to inlet flow conditions. In this try not only the design of the turbine meter package but also the data analysis method was altered. It was found that k factor slope of the turbine meter responds to the change of flow conditions in the test line with higher sensitivity than the degree of the data scattering. The flow standard system of $0.1m^3/s$ was chosen for the investigation. The systematic and random error of the system were less than ${\pm}0.08%$ and ${\pm}0.13%$ respectively.

• 한국연소학회:학술대회논문집
• /
• 대한연소학회 2003년도 제27회 KOSCO SYMPOSIUM 논문집
• /
• pp.19-26
• /
• 2003

Experimental measurements of flame structure and soot characteristics were performed for ethene inverse diffusion flames (IDF). IDF has been considered as the excellent flow field to study the incipient soot because soot particle do not experience the oxidation process. In this study, LIF image clarified the reaction zone of IDF with OH signal and PAH distribution. laser light scattering technique also identified the being of soot particle. To address the degree of soot maturing, C/H ratio and morphology of soot sample were investigated. From these measurements, the effect of flow residence time and temperature on soot inception could be suggested, and more details on soot characteristic in the IDF was determined according to fuel dilution and flame condition. The fuel dilution results in a decrease of temperature and enhancement of residence time, but the critical dilution mole fraction is existed for temperature not to effect on soot growth. Also, the soot inception evolved on the specific temperature and its morphology are independent of the fuel dilution ratio of fuel.

• 한국자동차공학회논문집
• /
• 제10권6호
• /
• pp.44-50
• /
• 2002

The spray characteristics of GDI(Gasoline Direct Injection) injector affects on engine efficiency and emission of a GDI engine. Thus, many researchers have investigated the spray characteristics and the mixture formation of GDI injector. In this study, it was tried to provide the fundamental data for GDl injector design which effects on the spray macroscopic characteristics such as penetration and spray angle. In addition, the mixture formation analyzed by using entropy analysis. The entropy analysis is based on the concept of statistical entropy, and it identifies the degree of homogeneity in the fuel concentration. The results show that as injection pressure increases but as ambient pressure increases, spray penetration decreases and spray angle doesn't affected by increasing injection pressure and ambient temperature. From the entropy analysis results, we could find that the direct diffusion phenomena is a dominant factor in the formation of a homogeneous mixture at downstream of GDI spray especially in vaporizing conditions.

• Bulletin of the Korean Chemical Society
• /
• 제35권2호
• /
• pp.501-504
• /
• 2014

A thermoresponsive polymer, poly(2-(dimethylamino)ethyl methacrylate) (PDMAEMA), was successfully synthesized by atom transfer radical polymerization (ATRP). Different amounts of 1,3-propanesultone were used as quaternization agent to transit the PDMAEMA into partially modified poly(zwitterions), resulting in p[DMAEMA-co-3-dimethyl(methacryloyloxyethyl)ammonium propanesulfonate] (PDMAEMA-co-PDMAPS). Molecular weight, molecular weight distribution, and degree of quarternization were determined by gel permeation chromatography (GPC) and 1H NMR spectroscopy. The transmission spectra of the 1.0 wt % aqueous solutions of the resulting polymers at 650 nm were measured as a function of temperature. Results showed that the lower critical solution temperature (LCST) and the upper critical solution temperature (UCST) could be easily controlled by the different composition of dimethylamino and zwitterion groups. The effect of partial quaternization on thermoresponsive properties was also studied by dynamic light scattering (DLS) with the same aqueous concentration (1.0 wt %) as employed for turbidimetry studies. The LCST and UCST values measured by DLS correlated well with those determined by turbidimetry.

• 대한수학회보
• /
• 제57권1호
• /
• pp.139-165
• /
• 2020

Mirror symmetry for del Pezzo surfaces was studied in [3] where they suggested that the mirror should take the form of a Landau-Ginzburg model with a particular type of elliptic fibration. This argument came from symplectic considerations of the derived categories involved. This problem was then considered again but from an algebro-geometric perspective by Gross, Hacking and Keel in [8]. Their construction allows one to construct a formal mirror family to a pair (S, D) where S is a smooth rational projective surface and D a certain type of Weil divisor supporting an ample or anti-ample class. In the case where the self intersection matrix for D is not negative semi-definite it was shown in [8] that this family may be lifted to an algebraic family over an affine base. In this paper we perform this construction for all smooth del Pezzo surfaces of degree at least two and obtain explicit equations for the mirror families and present the mirror to dP₂ as a double cover of ℙ².

• 한국세라믹학회지
• /
• 제29권10호
• /
• pp.779-784
• /
• 1992

In producing cordierite glass-ceramics by sintering, following experiments were conducted in order to determine the optimum heat-treatment schedule for high-crystallinity and dense sintered body. The glass composition of 11.67MgO-29.46Al2O3-52.88SiO2-5P2O5-1B2O3 (wt%) was selected on the basis of the early experiment. The 3-step heat treatment schedule was determined by the results of DTA, Dilatometric measurement and high-temperature XRD, where the particle-size-controlled glass powder was used. The degree of densification and the crystallinity were evaluated by the measurement of the bulk density and X-ray scattering intensity. The specimen fired with the optimum conditions showed ${\alpha}$-cordierite phase, relative density ∼98%, crystallinity ∼92%, thermal expansion coefficient ∼30${\times}$10-7/$^{\circ}C$, dielectric constant ∼5.5 and resistivity ∼1.0${\times}$1012 {{{{ OMEGA }}cm, respectively.