• The Korean Journal of Ceramics
• /
• v.1 no.1
• /
• pp.45-54
• /
• 1995

Four kinds of silicon nitride based ceramic materials have been hot pressed. Effect of the sintering additives on the phase transformation, microstructural development and mechanical properties was investigated. While sintering under the same condition a big difference among the microstructures of the specimens, they appeared alike if sintered to have a similiar $\alpha$-$\beta$ phase ratio. The specimen of the stoichiometric $\alpha$-$\beta$ sialon composition showed very limited amount of the intergranular glassy phase and a significant degree of the residual stress. It exhibited almost no strength degradation up to $1300^{\circ}C$, and the strength of the specimen degraded more as its composition deviated from the stoichiometry.

• Archives of Pharmacal Research
• /
• v.9 no.1
• /
• pp.39-43
• /
• 1986

Bovine serum albumin microspheres containing cytarabine were prepared using cross-linking agent, formaldehyde. The shape and the size distribution of them were observed. The shape of them was spherical and the susrface was compact and smooth. The size distribution of them was affected by dispersion forces during emulsfication. The release of cytarabine from albumin microspheres was dependent upon cross-linking time, amount of cross-linking agent and drug/albumin ratio. However, the difference of drug release by the dispersion forces was not great. After release test, the shape of albumin microspheres was nonspherical and the albumin matrix seemed to be a little relaxed. The degradation tests of albumin microspheres by the proteolytic enzyme showed that albumin microspheres were progressively digested according to the cross-linking degree.

• Korea-Australia Rheology Journal
• /
• v.14 no.3
• /
• pp.121-128
• /
• 2002

A series of thermoplastic polymers and their blends were melt-processed with high intensity ultrasonic wave in an intensive mixer. For the effective transfer of ultrasonic energy, an experimental apparatus was specially designed so that polymer melt can directly contact with ultrasonic horn. It was observed that significant variations in the rheological properties of polymers occur due to the unique action of ultrasonic wave without any aid of chemical additives. It was also found that the direct sonication on immiscible polymer blends in melt state reduces the domain sizes considerably and stabilizes the phase morphology of the blends. The degree of compatibilization was strongly affected by viscosity ratio of the components and the morphology was stable after annealing in properly compatibilized blends. It is suggested that ultrasound assisted melt mixing can lead to in-situ copolymer formation between the components and consequently provide an effective route to compatibilize immiscible polymer blends.

• Journal of the Korean Home Economics Association
• /
• v.39 no.1
• /
• pp.191-204
• /
• 2001

The purposes of this study are to find the general trends of patriarchal characteristics at workplace and to investigate the differences according to related variables. The concept of patriarchal characteristics at workplace is defined in terms of three aspects of work, human relation, and sexual harassment. The data were obtained through 880 employed women living in Chonbuk-Province. The major findings were as follows : 1) As to the aspects of work and human relation, it was found that employed women very highly experienced the inequality such as sexual division of labor, sex-discrimination, sexual segregation, and women degradation. 2) Over the 90% of respondents reported that they had experienced the victimization of sexual harassment at workplace at least once. 3) The work-related variables(the type of occupation, the size of workplace, the length of employed women's continuance service, the ratio of employed women at workplace) in the degree of patriarchal characteristics were more important then demographic variables(age, education, marriage status)

• The KIPS Transactions:PartC
• /
• v.12C no.5 s.101
• /
• pp.665-672
• /
• 2005

We present a novel pilot-aided channel estimation method for OFDM (Orthogonal Frequency Division Muitiplexing) system using WT(Wavelet transform) and interpolation. Due to excellent AWGN (Additive White Gaussian Noise) cancellation capability of n, pilot channels are estimated quite exactly and then, Dey are used in 2-degree polynomial interpolating the other remaining data symbol channels. The simulation results for Short WATM (Wireless Asynchronous Transfer Mode) channel show that the degradation in BER (Bit Error Ratio) performance of OFDM system iか this estimator is negligible compared to the case of perfect knowledge of CSI (Channel State Information).

• Clean Technology
• /
• v.25 no.1
• /
• pp.33-39
• /
• 2019

A.C (activated carbon) is mainly used to remove VOCs (volatile organic compounds), however, it has many problems such as fire risk due to increasing of adsorbent surface temperature during VOCs ad/desorption, increased cost by frequent replacement cycles requirement and performance degradation when containing moisture. In order to solve these problems, many researches, hydrophobic zeolite adsorbents, have been reported. In this study, $NH_4{^+}Y$-zeolite was synthesized with Y-zeolite through steam treatment and acid treatment, which is one of the hydrophobic modification methods, to secure high surface area, thermal stability and humidity resistance. The Y, Y-550-HN, Y-600-HN and Y-650-HN had adsorption capacities of $23mg\;g^{-1}$, $38mg\;g^{-1}$, $77mg\;g^{-1}$, $61mg\;g^{-1}$. The change of Si/Al ratio, which is an index to confirm the degree of modification, was confirmed by XRF (X-ray fluorescence spectrometer) analysis. As a result, the adsorbtion performance was improved when Y-zeolite modified, and the Si/Al ratio of Y, Y-550-HN, Y-600-HN, Y-650-HN were increased to 3.1765, 6.6706, 7.3079, and 7.4635, respectively. Whereas it was confirmed that structural crystallization due to high heat treatment temperature affected performance degradation. Therefore, there is an optimal heat treatment temperature of Y-zeolite, optimum modification condition study could be a substitute for activated carbon as a condition for producing an adsorbent having high durability and stability.

• Korean Journal of Materials Research
• /
• v.9 no.5
• /
• pp.503-508
• /
• 1999

We have investigated the physical and diffusion barrier property of Ti-Si-N film for Cu metallization. The ternary compound was deposited by using reactive rf magnetron sputtering of a TiSi$_2$target in an Ar/$N_2$gas mixture. Resistivities of the films were in range of 358$\mu$$\Omega$-cm, to 307941$\mu$$\Omega$-cm, and tended to increase with increasing the $N_2$/Ar flow rate ratio. The crystallization of the Ti-Si-N compound started to occur at 100$0^{\circ}C$ with the phases of TiN and Si$_3$N$_4$identified by using XRD(X-ray Diffractometer). The degree of the crystallization was influenced by the $N_2$/Ar flow ratio. The diffusion barrier property of Ti-Si-N film for Cu metallization was determined by AES, XRD and etch pit by secco etching, revealing the failure temperature of 90$0^{\circ}C$ in 43~45at% of nitrogen content. In addition, the very thin compound (10nm) with 43~45at% nitrogen content remained stable up to $700^{\circ}C$. Furthermore, thermal treatment in vacuum at $600^{\circ}C$ improved the barrier property of the Ti-Si-N film deposited at the $N_2$(Ar+$N_2$) ratio of 0.05. The addition of Ti interlayer between Ti-Si-N films caused the drastic decrease of the resistivity with slight degradation of diffusion barrier properties of the compound.

• Ocean and Polar Research
• /
• v.36 no.1
• /
• pp.25-37
• /
• 2014

To understand the degradation processes of organic matter related to sulfate reduction by Sulfate Reduction Bacteria (SRB) in the tidal flat sediments of Hwang-do and Sogeun-ri, Tae-an Peninsula in Chungnam-do, biogeochemical characteristics were analyzed and highlighted using specific microbial biomarkers. The organic geochemical parameters (TOC, ${\delta}^{13}C_{org}$, C/N ratio, long-chain-n-alkane) indicate that most of the organic matter has been derived from marine phytoplankton and bacteria in the fine-grained sediment of Sogeun-ri, although terrestrial plant components have occasionally been incorporated to a significant degree in the coarse-grained sediment of Hwang-do. The concentration of sulfate in pore water is a constant tendency with regard to depth profile, while methane concentration appears to be slightly different with regard to depth profile at the two sites. Especially, the sum of bacteria fatty acid (a-C15:0 + i-C15:0 + C16:1w5) confirms that the these concentrations in Sogeun-ri are related to the degradation of Benzene, Toluene, Ethylbenzene and Xylene (BTEX) compounds from the crude oil retained in the sediments as a result of the Hebei Spirit oil-spill accident in 2007. The methane-related microbial communities as shown by lipid biomarkers (crocetane, PMI) are larger in some sedimentary sections of Hwang-do than in the Sogeunri tidal flat. These findings suggest that methane production by microbiological processes is clearly governed by SRB activity along the vertical succession in organic-enriched tidal flats.

• Structural Engineering and Mechanics
• /
• v.39 no.6
• /
• pp.795-812
• /
• 2011

Estimation of damage probability of buildings under a future earthquake is an essential issue to ensure the seismic reliability. Fragility curves are useful tools for showing the probability of structural damage due to earthquakes as a function of ground motion indices. The purpose of this study is to compare the damage probability of R/C buildings with low and high level of strength and ductility through fragility analysis. Two different types of sample buildings have been considered which represent the building types mentioned above. The first one was designed according to TEC-2007 and the latter was designed according to TEC-1975. The pushover curves of sample buildings were obtained via pushover analyses. Using 60 ground motion records, nonlinear time-history analyses of equivalent single degree of freedom systems were performed using bilinear hysteretic model and peak-oriented hysteretic model with stiffness - strength deterioration for each scaled elastic spectral displacement. The damage measure is maximum inter-story drift ratio and each performance level considered in this study has an assumed limit value of damage measure. Discrete damage probabilities were calculated using statistical methods for each considered performance level and elastic spectral displacement. Consequently, continuous fragility curves have been constructed based on the lognormal distribution assumption. Furthermore, the effect of hysteresis model parameters on the damage probability is investigated.

• Korean Journal of Food Science and Technology
• /
• v.23 no.4
• /
• pp.465-470
• /
• 1991

In order to investigate the thermal and oxidative stability of different frying oils including soybean oil, palm oil, two blended oils of soybean-palm (5 : 5 and 7 : 3) and shortening, physico-chemical properties such as acid value, peroxide value, TBA value, degree of coloring, refractive index and specific gravity of the frying oils were measured during the preparation of French fried potatoes by repeated frying. The instability of soybean oil against thermal and oxidative degradation could be lessened by using blended oils in which the ratio of palm oil to soybean oil is more than 50%.