• Archives of Plastic Surgery
• /
• 제34권6호
• /
• pp.792-795
• /
• 2007

Purpose: Scoliosis is a multifactorial disorder caused by genetic, biochemical, developmental, neuromuscular factors and causes complex deformities which include skeletal deformity, pain, cardiovascular dysfunction, motor function disorder. Until now, the treatment of scoliosis have been focused on orthopedic correction, preservation of cardiopulmonary and neurologic function. But recently, as aesthetic demands increases, the needs for the correction or improvement of the trunk and extremity contour does. So, the correction of soft tissue contour deformity can be a new concept for the treatment of scoliosis. Methods: We corrected a deformed contour with prefabricated silicone implant in a scoliosis patient who had been operated for orthopedic correction previously. Submuscular pocket was made under trapezius and latissimus dorsi muscle. Silicone implant was placed in the pocket and fixed to thoracolumbar fascia with sutures. Results: We had a satisfactory results for the correction of contour deformity. There was no significant complication. Conclusion: Silicone implant is a new trial for the correction of scoliosis contour deformity. This method is simple, safe and brings on satisfactory results.

• 대한골관절종양학회지
• /
• 제1권2호
• /
• pp.244-248
• /
• 1995

사구종 환자 8례중 단순 절제만으로 전례에서 동통 소실과 함께 종괴 제거 후 세심한 조상 봉합을 함으로써 손톱의 변형을 최소화 할 수 있었고, 수술시 손톱을 완전히 제거하지 않고 다시 제 위치에 고정함으로써 수술후 창상치료가 간편하였으며, 환자가 조기에 손가락을 사용하는데 불편함을 최소화 할 수 있었다.

• 대한정형도수물리치료학회지
• /
• 제23권1호
• /
• pp.73-78
• /
• 2017

Background: The purpose of this study was to identify the effects of morphological Change of cervical spine to apply to neck retraction and extension regarding the straight deformity of cervical spine. Methods: A 40-year male subject with straight deformity of cervical spine participated in this study. The study subject underwent a cervical lateral radiography on the static position, neck retraction and neck extension on standing. Measurement method were using computer-based digital radiogram on a picture achieving computer system forthe centroid method, Cobb's angle and Jackson's angle. Results: Neck retraction was increased kyphosis on the C2-4 with lordosis on the C5-7. Neck extension was increased lordosis on the C2-7. Conclusions: These findings suggest that neck retraction was increased kyphosis and neck extension was increased lordosis based on the straight deformity of cervical spine. Therefore, we should be consider that neck extension exercise when increased lordosis for the patients of straight deformity of cervical spine.

• Archives of Plastic Surgery
• /
• 제33권2호
• /
• pp.135-143
• /
• 2006

The characteristics of the cleft lip nasal deformity is defined in this article in three planes. The alar flaring is explained in X axis, the lower positioning of the alar free margin is imagined in Y axis and the short hemicolumella is in Z axis. Most cleft surgeons have focused on the malposition of the lateral crus of alar cartilage while the author defined it in X and Y axises and tried to correct that deformity of short hemicolumella in Z axis. For the last 13 years the author applied that method in 818 cases of secondary cleft lip nose deformity. Through the columellar splitting incision extended to free margin of the alar not beyond the nasal dorsum, the skin and soft tissue of the webbing deformed the nasal tip was excised in crescent fashion. The dissected short hemicolumella including the medial crus was thus elevated and advanced into the space of the deformed nasal tip after the crescent excision. This procedure should be followed by the correction of the deformities in X and Y axis. The medial crus elevation is more effective and critical way to have the constant and nice outcome than the lateral crus reposition in secondary cleft lip nasal deformity

• 대한족부족관절학회지
• /
• 제23권3호
• /
• pp.135-138
• /
• 2019

According to a recent systemic review, hallux valgus deformity has a prevalence rate of about 23% among adults aged 18 to 65 years. To date, more than 100 operative methods have been reported for the correction of hallux valgus deformity. For young female with mild to moderate hallux valgus deformity, minimally invasive surgery can be considered for aesthetic demands. Here, we report a case of a young female patient with mild hallux valgus deformity treated by minimally invasive surgery using intramedullary low profile plate fixation. This can be the favorable method for secure fixation of the osteotomy site and prevention of medial skin irritation symptoms derived from a sharp osteotomy margin.

• Archives of Plastic Surgery
• /
• 제46권2호
• /
• pp.114-121
• /
• 2019

Background Bilateral cleft lip deformity is much more difficult to correct than unilateral cleft lip deformity. The complexity of the deformity and the sensitive relationships between the arrangement of the muscles and the characteristics of the external lip necessitate a comprehensive preoperative plan for management. The purpose of this study was to evaluate the repair of bilateral cleft lip using the Byrd modification of the traditional Millard and Manchester methods. A key component of this repair technique is focused on reconstruction of the central tubercle. Methods Fourteen patients with mean age of 5.7 months presented with bilateral cleft lip deformity and were operated on using a modification of the Millard and Manchester techniques. Patients with a very wide cleft lip and protruded or rotated premaxilla were excluded from this study. We analyzed 30 normal children for a comparison with our patients in terms of anthropometric measurements. Results By the end of the follow-up period (between 9 and 19 months), all our patients had obtained a full central segment with adequate white roll in the central segment and a deep gingivolabial sulcus, and we obtained nearly normal anthropometric measurements in comparison with age-matched normal children. Conclusions We recommend this modified technique for the treatment of bilateral cleft lip deformity.

• 대한족부족관절학회지
• /
• 제25권3호
• /
• pp.145-148
• /
• 2021

A checkrein deformity can occur after a distal tibiofibular fracture. Usually, a checkrein deformity due to a dysfunction of the extensor hallucis longus muscle is rarer than that of the flexor hallucis longus. Only a few related studies have been reported. The authors encountered an extensor hallucis longus checkrein deformity due to extensor retinaculum syndrome while managing a triplane fracture. In magnetic resonance imaging, an increase in the heterogeneous signal was observed on the T2-weighted images suggesting muscle necrosis or ischemic changes in a part of the extensor hallucis muscle. Postoperative great toe motor weakness, unintentional movement, sensory changes, and weakness improved spontaneously during the follow-up.

• 대한물리의학회지
• /
• 제16권3호
• /
• pp.21-27
• /
• 2021

PURPOSE: This study examined the relationship between the severity of a hallux valgus (HV) deformity and the kinetic three-dimensional ground reaction force (GRF) through a motion analysis system with force platforms in individuals with a HV deformity during normal speed walking. METHODS: The participants were 36 adults with a HV deformity. The participants were asked to walk on a 6 m walkway with 40 infrared reflective markers attached to their pelvic and lower extremities. A camera capture system and two force platforms were used to collect kinetic data during gait. A Vicon Nexus and Visual3D motion analysis software were used to calculate the kinetic GRF data. RESULTS: This research showed that the anterior maximal force that occurred in the terminal stance phase during gait had a negative correlation with the HV angle (r = -.762, p < .01). In addition, the HV angle showed a low negative correlation with the second vertical maximal force (r = .346, p < .05) and a moderate positive correlation with the late medial maximal force (r = .641, p < .01). CONCLUSION: A more severe HV deformity results in greater abnormal translation of the plantar pressure and a significantly reduced pressure force under the first metatarsophalangeal joint.

• 대한치과교정학회지
• /
• 제52권4호
• /
• pp.258-267
• /
• 2022

Objective: This study aimed to evaluate the superimposition accuracy of digital modes for measuring tooth movement in patients requiring anterior retraction after premolar extraction based on the proposed reference regions. Methods: Forty patients treated with bilateral maxillary first premolar extraction were divided into two groups: moderate retraction (< 7.0 mm) and maximum retraction (≥ 7.0 mm). Central incisor displacement was measured using cephalometric superimpositions and three-dimensional (3D) digital superimpositions with the 3rd or 4th ruga as the reference point. The Wilcoxon signed-rank test and linear regression analyses were performed to test the significance of the differences and relationships between the two measurement techniques. Results: In the moderate retraction group, the central incisor anteroposterior displacement values did not differ significantly between 3D digital and cephalometric superimpositions. However, in the maximum-retraction group, significant differences were observed between the anteroposterior displacement evaluated by the 3rd ruga superimposition and cephalometric methods (p < 0.05). Conclusions: This study demonstrated that 3D digital superimpositions were clinically as reliable as cephalometric superimpositions in assessing tooth movements in patients requiring moderate retraction. However, the reference point should be carefully examined in patients who require maximum retraction.

• 대한족부족관절학회지
• /
• 제27권3호
• /
• pp.112-116
• /
• 2023

A 74-year-old female patient, who underwent surgery for a left distal tibiofibular fracture 40 years earlier, visited the hospital with an ankle varus deformity due to malunion. The patient complained of discomfort while walking due to the ankle and hindfoot varus deformity but did not complain of ankle pain. Therefore, correction using supramalleolar osteotomy was planned, and through virtual surgical simulation, it was predicted that a correction angle of 24° and an osteotomy gap open of 12 mm would be necessary. An osteotomy guide and an osteotomy gap block were made using three-dimensional (3D) printing to perform the osteotomy and correct the deformity according to the predicted goal. One year after surgery, it was observed that the ankle varus was corrected according to the surgical simulation, and the patient was able to walk comfortably. Thus, for correction of deformity, virtual surgical simulation and a 3D-printed osteotomy guide can be used to predict the target value for correction. This is useful for increasing the accuracy of correction of the deformity.