• 보존과학회지
• /
• 제24권
• /
• pp.57-66
• /
• 2008

출토 부분탄화 목제유물은 물성이 다른 부위가 공존하는 것에 의해 박리와 변형이 일어나기 쉬운 것으로 오래전부터 보고되어 왔지만, 실험연구 등을 통한 연구성과는 많지 않았다. 이번 실험에서는 당알코올법과 일반적으로 널리 사용되고 있는 친수성 수지인 Pdyethyleneglycol(PEG)법을 비교 대상 처리법으로 설정하였다. 중량변화율과 수축변화율, 전자현미경(SEM)관찰에 의한 목재조직의 변화양상을 검토한 결과 PEG4000법은 80%이상 농도까지 단계적 함침이 필요하며 Sugar Alcohol(S A)법은 40%농도 함침에서부터 안정적인 양상을 보여 단기간 함침의 가능성을 나타냈다. 본 연구에 사용한 판상 부분 탄화재의 변형은 주로 미탄화부의 수축에 의한 현상으로 생각되며 PEG4000법의 경우 최종 함침농도가 20%, 40%, 60%에서, S A법은 20%농도에 함침한 샘플에서 목재세포조직의 수축이 확인되었다.

• 한국안전학회지
• /
• 제27권3호
• /
• pp.57-62
• /
• 2012

The purpose of this paper is to find dangerous factors of a water purifier when water leaks due to inappropriate use and analyze the patterns of damaged parts in order to provide data for the examination of the cause of the problem. If the water purifier is inspected and managed by a non-specialist, when the FLC(Float Level Controller) at the top is inclined, water leakage may occur to the water purifier. The leaked water flows onto the cables and hoses and enters the thermostat terminal, heater, PCB, power supply connection connector, etc., becoming a dangerous factor that may cause a system failure, fire, etc. Due to the water that entered the input terminal, low noise and white smoke were generated at first. However, the flame gradually propagated due to the continuous inflow of moisture. It was found that when moisture reached the PCB, a carbonized conductive path was formed at the varistor terminal, input terminal, semiconductor device terminal, etc., and the flame became larger, which might result in a fire. From the metal microscope analysis of a damaged condenser terminal, it was found that the amorphous structure unique to copper cable disappeared, and voids, boundary surface and disorderly fine particles occurred. Also, in the case of the connector into which moisture penetrated, fusion and deformation occurred at the cable connection clips. The result of analysis of the power supply cable connector using a thermal image camera showed that most of the heat was generated from the cable connection clips and the temperature at the connection center was normal.