• 제목/요약/키워드: Deformation limit

검색결과 361건 처리시간 0.05초

Carbon-induced reconstructions on W(110)

  • 김지현;;;김재성
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2009년도 제38회 동계학술대회 초록집
    • /
    • pp.362-362
    • /
    • 2010
  • Today, vast attention has been paid to periodic arrays of nanostructures due to their potential for applications such as memory with huge storage density. Such application requires large-scale fabrication of well ordered nano-sized structures. One of the most widely used methods for the ordered nanostructures is lithography. This top-down process, however, has the limit to reduce size. Here the promising alternative is the self-organization of ordered nano-sized structures such as large scale 2d carbon-induced reconstructions on W(110). In the present study, we report on the first well-resolved atomic resolution STM studies of the well-known R($15{\times}3$) and R($15{\times}12$) carbon induced reconstruction of the W(110). From the atomic image of R($15{\times}3$) for different values of tunneling gap resistance, we can tell there are no missing atoms in unit cells of R($15{\times}3$) and some atomic displacements are substantial from the clean W(110), even though not all the imaged position of atoms correspond to tungsten, but may include those of carbon. We are considering two cases; First case is related to lattice deformation, or top layer of W(110) is deformed in the process of relief of strain caused by random inserting of carbon atoms possibly in the interstitial position. In the second case, R($15{\times}3$) unit cell results from a coincidence lattice between clean W(110) substrate and tungsten carbide overlayer which has rectangular atomic arrangement and giving R($15{\times}3$) coincidence lattice. beta-W2C showing rectangular unit cell should be a candidate. Further, we report on new reconstructions. Unlike the well-known R($15{\times}12$) consisting of two parts, two inner structures between two "Backbone" structures. The new reconstruction, which we found for the first time, contains more parts between the "Backbone"s. Sometimes we can observe the reconstruction consists of only inner parts without "Backbone" parts. Thus, the observed reconstruction can be built by constructing of two types of "Lego"-like block. Moreover, the rectangle shape of "Backbone" transform to parallelogram-like shape over time, the so-called wavy-R($15{\times}12$). Adsorption of hydrogen can be the reason for this transformation.

  • PDF

그라우트 주입율 변화에 따른 사질토의 동적계수 특성 (Characteristics of Dynamic Parameter of Sandy Soil According to Grout Injection Ratio)

  • 안광국;박준영;오종근;이준대;한기환
    • 한국지반환경공학회 논문집
    • /
    • 제12권5호
    • /
    • pp.59-63
    • /
    • 2011
  • 전단탄성계수와 감쇠비와 같은 동적지반계수는 반복하중과 동적하중을 받는 지반구조물 설계에서 중요한 요소이다. 선형 한계변형률 내에서 미소변형률에 관한 전단탄성계수와 감쇠비는 변형률과 관계없이 일정하다. 전단탄성계수는 최대전단탄성계수로 감쇠비는 최소 감쇠비로 고려하였다. 동적변형특성 범주내의 최대선형탄성계수에 관련된 많은 시험들이 수행됨과 동시에 간극비, 과압밀비, 구속압, 지질이력, PI 그리고 하중주기수에 관련된 많은 인자들이 동적지반특성에 영향을 미친다. 그러나 그라우팅에 의해 향상된 지반동적특성에 관한 연구는 지하연속벽시공, 심층혼합처리공법, 강관다단그라우팅과 같이 미비한 실정이다. 본 논문에서는 그라우팅에 의해 향상된 동적지반특성을 연구하기 위하여 함수비(20%, 25%, 30%), 그라우트 주입율(5%, 10%, 15%),양생기간(7일, 28일)을 변화시키면서 공진주시험을 실시하였다. 그 결과, 밀크 그라우트의 주입율과 재령, 함수비에 따라 동적계수인 전단탄성계수와 감쇠비가 영향을 받는 것으로 나타났다.

Shaking table tests of prestressed damping-isolation units using a spring and rubbers

  • Yang, Keun-Hyeok;Mun, Ju-Hyun;Im, Chae-Rim;Won, Eun-Bee
    • Earthquakes and Structures
    • /
    • 제23권4호
    • /
    • pp.373-384
    • /
    • 2022
  • To improve the seismic performance of suspended ceiling structures, various vibration-damping devices have been developed. However, the devices made of metals have a limit in that they cause large deformation and seriously damages the exterior of the suspended ceiling structure from the wall. As a results, their strengthening effect of the suspended ceiling structure was minimal. Thus, this study employed a spring and vibration-proof rubber effectively controlled vibrations without increasing horizontal seismic loads on the ceiling to enhance the seismic resistance of suspended ceiling structures. The objective of the study is to examine the dynamic properties of a seismic damping-isolation unit (SDI) with various details developed. The developed SDI was composed of a spring, embossed rubbers, and prestressed bolts, which were the main factors enhancing the damping effect. The shaking table tests were performed on eight SDI specimens produced with the number of layers of embossed rubber (ns), presence or absence of a spring, prestressed force magnitude introduced in bolts (fps), and mass weight (Wm) as the main parameters. To identify the enhancement effect of the SDI, the dynamic properties of the control specimen with a conventional hanger bolt were compared to those of the SDI specimens. The SDI specimens were effective in reducing the maximum acceleration (Ac max), acceleration amplification factor (αp), relative displacement (δR), and increasing the damping ratio (ξ) when compared to the control specimen. The Ac max, αp, and δR of the SDI specimens with two rubbers, spring, and fps of 0.1fby, where fby is the yielding strength of the screw bolt were 57.8%, 58.0%, and 61.9% lower than those of the conventional hanger bolt specimens, respectively, resulting in the highest ξ (=0.127). In addition, the αp of the SDI specimens was 50.8% lower than those specified in ASCE 7 and FEMA 356. Consequently, to accurately estimate the αp of the SDI specimens, a simple model was proposed based on the functions of fps, stiffness constant of the spring (K), Wm, and ns.

반복 하중이 Full veneer crown의 유지력에 미치는 영향에 관한 연구 (THE EFFECT OF CYCLIC LOADING ON THE RETENTIVE STRENGTH OF FULL VENEER CROWNS)

  • 김기연;이선형;정헌영;양재호;허성주
    • 대한치과보철학회지
    • /
    • 제38권5호
    • /
    • pp.583-594
    • /
    • 2000
  • Dislodgement of a crown or extension bridge and the loosening of a retainer of a bridge is a serious clinical problem in fixed restoration. Generally these problems are considered to be associated with deformation of the restoration. During biting, the restoration is subjected to complex forces and deforms considerably within the limit of its elasticity. Deformation of the restoration under the occlusal force induces excessive stress in the cement film, which then leads to the cement fracture. Such a fracture may eventually cause loss of the restoration. Because most of the past retention tests for full veneer crown were done without fatigue loading, they were not exactly simulating intraoral environment. And the purpose of this study was to evaluate the effect of cyclic cantilever loading on the retentive strength of full veneer crowns depending on different type of cements and taper of prepared abutment. Steel dies with $8^{\circ}\;or\;16^{\circ}$ convergence angle were fabricated through milling and crowns with the same method. These dies and crowns were divided into 8 groups. Group 1 : $16^{\circ}$ taper die, cementation with zinc phosphate cement, without loading Group 2 : $16^{\circ}$ taper die, cementation with zinc phosphate cement, with loading Group 3 : $8^{\circ}$ taper die, cementation with zinc phosphate cement, without loading Group 4 : $8^{\circ}$ taper die, cementation with zinc phosphate cement, with loading Group 5 : $16^{\circ}$ taper die, cementation with Panavia 21, without loading Group 6 : $16^{\circ}$ taper die, cementation with Panavia 21, with loading Group 7 : $8^{\circ}$ taper die, cementation with Panavia 21 without loading Group 8 : $8^{\circ}$ taper die, cementation with Panavia 21, with loading After checking the fit of die and crown, the luting surface of dies and inner surface of crowns were air-abraded for 10 seconds. The crowns were cemented to the dies, with cements mixed according to the manufacturer's recommendations. A static load of 5kg was then applied for 10 minutes with static loading device. Twenty-four hours later, group 1, 3, 5, 7 were only thermocycled, group 2, 4, 6, 8 were subjected to cyclic loading after thermocycling. Retentive tests were performed on the Instron machine. From the finding of this study, the following conclusions were obtained 1. Panavia 21 showed significantly higher retentive strength than zinc phosphate cement for all groups (p<0.05). 2. There was a significant difference in the retentive strength between $8^{\circ}\;and\;16^{\circ}$ taper for zinc phosphate cement(p<0.05), but no significant difference for Panavia 21 (p>0.05). 3. Cyclic loading significantly decreased the retentive strength for all groups(p<0.05). 4. For zinc phosphate cement, there was 35% reduction of the retentive strength after loading in the $16^{\circ}$ taper die, 25% in the $8^{\circ}$ taper die, and for Panavia 21, 21% in the $16^{\circ}$ taper die, 18% in the $8^{\circ}$ taper die.

  • PDF

한반도 남동부 제3기 암맥군과 화신암류의 $^{40}Ar/^{39}Ar$ 연대 ([ $^{40}Ar/^{39}Ar$ ] Ages of the Tertiary Dike Swarm and Volcanic Rocks, SE Korea)

  • 김종선;손문;김진섭;김정민
    • 암석학회지
    • /
    • 제14권2호
    • /
    • pp.93-107
    • /
    • 2005
  • 신생대 제3기 동안 지각변형과 화산활동이 활발하였던 한반도 남동부에 분포하는 제3기 암맥군과 화산암류를 대상으로 $^{40}Ar/^{39}Ar$ 연대측정을 실시하였다. 선행연구에서 연일구조선을 중심으로 동서 양편의 염기성 암맥들이 각각 남북방향과 북동방향의 서로 다른 방향의 평균 관입면을 가지나, 동일한 마그마에서 기원된 것들임을 밝혀 연일구조선이 제3기 마이오세 지각변형을 규제한 주요 지구조선임을 보고하였다. 이번 연구에서 연일구조선 동서 양편 염기성 암맥군의 관입연령이 각각 $47.3\pm0.8Ma$$48.0\pm1.3Ma$로써 매우 유사함이 밝혀졌다. 이 결과는 연일구조선이 제3기 지각변형 동안 지괴의 시계방향 수평회전운동을 규제한 주요 지구조선임을 확인시켜 주는 것이다. 또한 염기성 암맥들이 암맥군으로 빈번하게 산출되는 것은 약 48Ma경에 한반도 남동부가 동서방향의 인장 응력장하에 놓여 있었음을 지시한다. 이 시기는 인도와 유라시아 대륙의 충돌시기와 태평양판의 운동방향이 북북서에서 서북서방향으로 변화된 시기에 해당된다. 출현 빈도가 낮은 중성암맥과 산성암맥에서는 각각 $55.9\pm1.5Ma$$53.0\pm1.0Ma$의 연령을 구했다. 화산암류에 대한 연대측정 결과, 효동리화산암류 내 안산암질 용암과 용동리응회암류 내 데사이트질 용암은 각각 $24.0\pm0.5Ma$$21.6\pm0.4Ma$의 연령을, 추령각력암을 관입 및 피복하고 있는 데사이트질 암석에서는 각각 $21.8\pm0.1Ma$$22.0\pm0.5Ma$의 연령을 얻었다. 이들 연령 자료는 전기 마이오세 동안 현무암질 화산활동에 비해 안산암-데사이트질 화산활동이 먼저 발생하였다는 최근의 야외조사 결과와 부합된다.

조임회전력이 임플랜트-지대주 나사 연결부의 안정성에 미치는 영향 (Influence of Tightening Torque on Implant-Abutment Screw Joint Stability)

  • 신현모;정창모;전영찬;윤미정;윤지훈
    • 대한치과보철학회지
    • /
    • 제46권4호
    • /
    • pp.396-408
    • /
    • 2008
  • 연구목적: 임플랜트 치료에서 가장 흔히 발생하는 기계적 문제점 중 하나는 나사의 풀림이다. 지대주 나사에 조임회전력을 가하는 목적은 나사를 신장시켜, 신장된 나사의 인장력에 의한 지대주와 고정체간의 압축력을 통해 연결부의 안정성을 부여하는 데 있다. 조임 회전력의 결과로 나타나는 전하중의 크기는 다양한 요소에 의해 영향을 받기 때문에, 동일한 조임회전력을 적용하였다 할지라도 임플랜트 시스템의 종류에 따라 전하중의 크기가 달라질 수 있다. 따라서 지대주 나사 연결부의 안정성을 위한 다양한 임플랜트 시스템의 적정 조임회전력 크기에 관한 연구가 필요하다. 본 연구에서는 external butt joint와 두 가지 internal cone 연결형태를 갖는 임플랜트 시스템들에서 지대주 나사의 조임회전력이 임플랜트-지대주 나사 연결부의 안정성에 미치는 영향을 하중 전후의 풀림회전력 측정을 통해 알아보고자 하였다. 연구재료 및 방법: External butt joint 형태를 가지는 US II 시스템과 $8^{\circ}$ internal cone 연결형태의 SS II 및 $11^{\circ}$ internal cone 연결형태의 GS II 시스템에서 20 Ncm, 30 Ncm, 그리고 40 Ncm의 각기 다른 조임회전력을 적용한 후 초기 풀림회전력 및 상실률과 $10^5$회의 반복하중 후의 풀림회전력 및 상실률을 비교 분석하였다. 연구결과 및 결론: 1. 초기 풀림회전력과 하중 후 풀림회전력은 조임회전력의 크기가 증가할수록 크게 나타났다 (P < .05). 2. 초기 풀림회전력 상실률은 SS II 시스템에서는 조임회전력 크기에 따른 차이가 없었으나 (P > .05), GS II와 US II에서는 20 Ncm 보다 40Ncm의 조임회전력에서 더 낮게 나타났다 (P < .05). 3. 하중 후 풀림회전력 상실률은 세 시스템 모두 30 Ncm의 조임회전력을 가했을 때 가장 낮게 나타났다 (P < .05). 4. 하중 후 풀림회전력 상실률은 SS II, GS II, 그리고 US II 순으로 높아지는 경향을 보였다. 5. 초기 풀림회전력과 하중 후 풀림회전력 상실률 간에는 상관관계가 없었다 (P > .05). 이상의 결과로부터 임플랜트 시스템의 종류뿐만 아니라 조임회전력의 크기 또한 지대주 나사의 풀림회전력 상실에 영향을 준다는 것을 알 수 있다. 따라서 임플랜트-지대주 나사 연결부 안정성 유지를 위해서는 임플랜트 시스템마다 적정 조임회전력이 제시되어야 하고, 또한 임상에서 이를 준수하는 것이 매우 중요하다고 생각된다.

발열반응 촉매제와 열처리를 이용한 석면함유 슬레이트의 무해화 연구 (Transformation of Asbestos-Containing Slate Using Exothermic Reaction Catalysts and Heat Treatment)

  • 윤성준;정현이;박병노;김용운;김혜수;박재봉;노열
    • 자원환경지질
    • /
    • 제52권6호
    • /
    • pp.627-635
    • /
    • 2019
  • 슬레이트는 석면을 이용한 대표적인 건축자재 중 하나로써 백석면(10~20%)과 시멘트 성분을 결합하여 만든 제품이다. 슬레이트에 포함되어 있는 석면은 인체에 유입되면 세포 손상이나 변형을 일으키고 체외로 잘 배출되지 않아 폐암, 석면폐, 악성중피종 및 흉막비후 등과 같은 질병을 일으키는 원인이 되는 것으로 입증되어 1977년 세계보건기구(WHO) 산하 국제암연구소(IARC)에서는 1군 발암물질로 지정하였다. 현재 이러한 슬레이트는 대부분 지정매립장에 매립하여 처리하고 있으나 매립용량이 한계에 다다르고 있고 매립한다고 하여도 추후 외부환경으로 노출될 수 있는 잠재적인 위험성이 있어 매립 처리방법 이외에 슬레이트에 포함된 석면을 무해화하여 안전하게 처리할 수 있는 방법이 필요하다. 따라서 이 연구에서는 발열반응 촉매제와 열처리를 이용하여 슬레이트에 함유된 석면 무해화 가능성을 확인하고자 하였다. 실험은 석면해체·제거 사업장에서 발생한 석면함유 슬레이트를 이용하였고 발열반응 촉매제는 염화칼슘(CaCl2), 염화마그네슘(MgCl2), 수산화나트륨(NaOH), 규산소듐(Na2SiO3), 카올린[Al2Si2O5(OH)4)], 활석[Mg3Si4O10(OH)2]을 이용하여 총 6가지의 촉매제를 제조하였다. 6가지의 촉매제를 슬레이트에 각각 도포한 후 열중량-시차열분석(TG-DTA)을 실시하여 분석결과를 토대로 슬레이트 무해화를 위한 열처리 온도를 750℃로 결정하였다. 슬레이트에 6가지 촉매제를 각각 도포한 후 750℃에서 2시간 열처리하여 X-선 회절 분석(XRD), 주사전자현미경 분석(SEM-EDS), 투과전자현미경 분석(TEM-EDS)을 한 결과 슬레이트 내 백석면[chrysotile, Mg3Si2O5(OH5)]이 주상의 고토감람석(forsterite, Mg2SiO4)으로 상전이 됨을 확인하였다. 또한, 슬레이트 원시료와 발열반응 촉매제 도포 후 열처리한 시료에 물리적인 힘을 가하여 광물의 형상 변화를 비교 관찰한 결과, 슬레이트 내 백석면은 섬유형을 유지하였으나 촉매제 도포 및 열처리를 한 시료는 무정형 형태로 깨지는 것을 확인할 수 있었다. 따라서 발열반응 촉매제와 열처리를 통하여 낮은 온도에서 경제적으로 석면함유 슬레이트를 안전하게 처리할 수 있는 하나의 방안을 제시할 수 있을 것으로 사료된다.

현대회화에서의 형태와 물질 -Digital Transfiguration에 관한 연구- (Digital painting: Image transfonnation, simulation, heterologie and transfonnation)

  • 정숙영
    • 조형예술학연구
    • /
    • 제10권
    • /
    • pp.161-181
    • /
    • 2006
  • The words which appeared in my theoretical study and work are image transformation to digital painting, simulation, heterologie and transfiguration, etc. Firstly, let's look into 'digital era' or 'new media era'. Nowadays, the image world including painting within the rapid social and cultural change, which is called as digital era, is having the dramatic change. Together with the development of scientific technology, large number of events which was deemed to be impossible is happening as real in image world Moreover, these changes in image world is greatly influencing to our life. The word which compresses this change of image world and shows is 'digital'. Digit, which means fingers in Latin, indicates separately changing signal, and to be more narrow, it indicates the continual signal of '0' and ' 1' in computer. The opposite word is 'analogue'. As analogue is the word meaning 'infer' or 'similarity', it indicates the signal or form which continuously changes along the series of time when it is compared to digital. Instead of analogue, digital is embossed as a major ruler along the whole area of our current culture. In whole culture and art area, and in whole generalscience, digital is appearing as it has the modernism and importance. The prefix, 'digital', e.g. digital media, digital culture, digital design, digital philosophy, etc, is treated as the synonym of modernism and something new. This advent of digital results the innovative change to the image world, creates the new beauty experience which we could not experience before, and forecasts the formation of advanced art and expansion of creative area. Various intellectual activities using computer is developing the whole world with making the infrastructure. Computer in painting work immediately accomplishes the idea of painters, takes part in simulation work, contingency such as abrupt reversal, extraction, twisting, shaking, obscureness, overlapping, etc, and timing to stimulate the creativity of painters, and provides digital formative language which enables new visual experience to the audience. When the change of digital era, the image appeared in my work is shown in 'transfiguration' like drawing. The word, 'transfiguration' does not indicate the completed and fixed real substance but indicate endlessly moving and floating shape. Thus, this concept is opposite to the substantial consideration, so that various concepts which is able to replace this in accordance with the similar cases are also exist such as change, deterioration, mutation, deformity of appearance and morphing which is frequently used in computer as a technical word. These concepts are not clearly classified, and variably and complicatedly related. Transfiguration basically means the denial of "objectivity' and '(continual) stagnation' or deviation from those. This phenomenon is appeared through the all art schools of art ever since the realism is denied in the 19th century. It is called as 'deformation' in case of expressionism, futurism, cubism, etc, in the beginning of the century, which its former indication is mostly preserved within the process of structural deviation and which has the realistic limit which should be preserved. On the contrary, dramatic transfiguration which has been showing in the modern era through surrealism is different in the point that dramatic transfiguration tends to show the deterioration and deviation rather than the preservation of indicated object. From this point, transfiguration coming out from morphing using computer deteriorates and hides the reality and furthermore, it replaces the 'reality'. Moreover, transfiguration is closely approached to the world of fake or 'imaginary' simulation world of Baudrillard. According to Baudrillard, the image hides and deteriorates the reality, and furthermore, expresses 'not existing' to 'imaginary' under the name of transfiguration. Certain reality, that is, image which is absent from the reality is created and overflowed, so that it finally replaces the reality. This is simulation as it is said by Baudrillard. In turn, Georges Bataille discusses about the image which is produced by digital technology in terms of heterologie. Image of heterologie is the visual signal which is established with the media. Image of media is to have the continuous characteristics of produce, extinction, and transformation, and its clear boundary between images becomes meaningless. The meaning of composition, excess, violation, etc of digital image is explained to heterological study or heteologie suggested as important meaning of Georges Bataille who is a heretic philosopher. As the form and image of mutation shows the shape in accordance with mechanical production, heterologie is introduced as very low materialism (or bas materialisme), in this theory. Heterologie as low materialism which is gradually changing is developing as a different concept and analysis because of the change of time in the late 20s century beside high or low meaning. Including my image, all images non-standardizes and transforms the code. However, reappearance and non-standardization of this code does not seem to be simple. The problem of transformation caused by transfiguration which appears in my digital drawing painting, simulation, heterologie, etc, are the continual problems. Moreover, the subject such as existence of human being, distance from the real life, politics and social problems are being extended to actual research and various expressing work. Especially, individual image world is established by digital painting transfiguration technique, and its change and review start to have the durability. The consciousness of observers who look at the image is changing the subject. Together with theoretical research, researchers are to establish the first step to approach to various image change of digital era painting through transfiguration technique using our realistic and historical image.

  • PDF

순환식 막 모듈 여과장치를 이용한 산성용액의 수처리 공정 시 발생하는 한외여과막 오염에 관한 연구 (A Study on the Fouling of Ultrafiltration Membranes Used in the Treatment of an Acidic Solution in a Circular Cross-flow Filtration Bench)

  • 김남준;최창민;최용훈;이준호;김환진;박병재;주영길;강진석;백윤기
    • 멤브레인
    • /
    • 제19권3호
    • /
    • pp.252-260
    • /
    • 2009
  • 산성 용액의 수처리가 폴리아크릴로니트릴계 중공사형 한외여과막에 미치는 영향을 십자흐름 방식의 순환식 막 모듈 여과 장치를 이용하여 연구하였다. 막 모듈 여과장치를 이용하여 pH 2인 강산성 용액의 수처리를 시작한 지 약 80시간이 경과되었을 때 막 투과량(permeate flux)이 급격히 감소하는 것을 관측하였다. 또한, 수처리 시간 별로 막 모듈 여과장치의 공급조에서 채취한 샘플 용액의 자외선/가시광선 흡수 스펙트럼과 기체 크로마토그래피/질량분석(gas chromatography/mass spectrometry, GC/MS) 스펙트럼을 분석한 결과 수처리 시간이 경과함에 따라 막 모듈을 통과한 농축액 속에 새로운 유기 화합물이 생성된다는 사실을 알아내었다. 질량스펙트럼 분석을 통해 이 화합물을 1,6-dioxacyclododecane-7,12-dione이라고 예측하였으며, 각종 플라스틱 특히 폴리우레탄 제조 시 사용되는 첨가제 중 하나라는 사실도 알아내었다. 수처리에 사용된 막에 대한 전자주사 현미경 사진 및 고체 NMR 분석 등의 추가 실험을 통해 산성 용액 수처리 과정에서 발생한 막 투과량의 감소는 산성 용액 하에서 일어나는 UF막의 변형에 의한 것이 아니라 막 모듈 여과장치에 사용된 폴리우레탄 튜브에서 산과의 반응에 의해 용출된 저 분자량의 유기화합물이 막 오염 현상을 일으켰기 때문인 것으로 결론지었다. 이번 연구 결과는 산성 용액의 수처리 공정 시 UF막 자체의 산에 대한 반응성 뿐 아니라 막 모듈을 포함한 수처리 장치 자체의 산에 대한 반응성 역시 산 용액의 수처리 효율은 물론, 산을 이용한 막의 화학 세정 효율 및 수처리 막의 pH 사용 한계를 결정하는 데 매우 중요한 요소 중 하나라는 것을 보여준다.

임플란트 지대주나사의 조임회전력이 연결부 안정성에 미치는 영향에 관한 3차원 유한요소해석 연구 (Effect of Tightening Torque on Abutment-Fixture Joint Stability using 3-Dimensional Finite Element Analysis)

  • 엄태관;서승우;전계록;신정욱;정창모
    • 대한치과보철학회지
    • /
    • 제47권2호
    • /
    • pp.125-135
    • /
    • 2009
  • 연구목적: 임플란트 치료에서 흔히 발생하는 기계적인 문제점을 하나가 지대주나사의 풀림과 파절이다. 일반적으로 나사 연결의 안정성을 위해서는 지대주나사의 조임회전력에 의한 전하중을 나사의 탄성한계까지 증가시킬 필요가 있다. 그러나 저작운동에 의한 기능부하는 전하중이 가해진 지대주나사에 추가적인 인장력을 가하게 되어 나사의 풀림이나 파절의 가능성을 높인다. 이러한 풀림이나 파절을 방지하면서 동시에 최대의 결합 강도를 가지는 조임회전력을 찾는 연구가 필요하다. 본 연구는 지대주나사의 조임회전력이 임플란트-지대주 연결부 안정성에 미치는 영향을 3차원 유한요소 분석을 통하여 확인하고자했다. 연구 재료 및 방법: External butt joint를 가진 임플란트를 기반으로 3차원 유한요소 해석모형을 설계하였다. 조임회전력에 따른 지대주나사의 전하중을 이론치, 실험치 및 해석치를 비교하여 해석모형을 검증하였다. 검증한 해석모형에서 대해 조임회전력을 10 Ncm, 20 Ncm, 30 Ncm, 그리고 40 Ncm로 각각 적용하고 지대주에 30도 경사지게 250 N의 외부하중을 가하여 유산요소 해석을 실시하였다. 그 결과를 통해 지대주나사의 최대 등가응력을 계산하고 고정체와 지대주 연결부의 응력분포 및 이개거리(gap distance)를 산출하였다. 결과 및 결론: 본 연구조건 하에서 다음과 같은 결과를 얻었다. 1. 전하중은 조임회전력이 클수록 증가하였다. 2. 조임회전력 적용 후 최대 등가응력은 지대주나사 경부에서 발생하였으며, 나사산 체결부에서는 주로 경부쪽 네 개의 나사산에 응력이 집중되었다. 3. 외부하중을 가했을 때에도 조임회전력을 적용했을 때와 동일하게 최대 등가응력은 주로 지대주나사 경부에서 발생하였으나, 10 Ncm의 조임회전력을 적용한 경우에서는 지대주나사 두부밑면에서 발생하였다. 4. 외부하중을 가했을 때 10 Ncm와 20 Ncm의 조임회전력을 적용한 경우에서는 연결부 이개(joint opening) 현상이 관찰 되었다. 5. 조임회전력이 40 Ncm인 경우에는 경사하중에 의해 지대주나사의 경부에 발생하는 최대등가응력이 나사의 소재인 티타늄 합금의 허용응력을 초과하였다. 이상의 결과로 볼 때, 조임회전력은 고정체와 지대주 연결부의 안정성에 영향을 미치는 것이 확인되었다. 임플란트 지대주나사는 임상에서 발생하는 기능 하중을 고려하여 고정체와 지대주 연결의 안정성을 유지할 수 있는 적정 조임회전력의 크기가 제안되어야 한다.