• 지질공학
• /
• 제12권1호
• /
• pp.75-88
• /
• 2002

오염된 연약지반에 편재하중이 작용하게 되면 지반 중에 침하, 측방변위, 융기 및 전단파괴 등의 큰 소성 전단변형이 발생하게 되고, 때로는 지반과 구조물에 막대한 손상을 초래하게 된다. 따라서 본 연구는 오염된 연약지반의 식내모형실험을 실시하였으며 측방유동압의 결정방법을 기존의 이론식과 비교하여 분석하였다. 모형실험은 먼저 모형재하장치를 제작하고 토조 안에 오염된 지반시료를 채워 비배수상태에서 하중을 인정한 시간 간격으로 재하하여 변형상태를 관측하였다. 그 결과 편재 하중을 받는 오염된 연약지반에서의 측방유동압은 P=K$_{0}$YH식에 의해서 산정함이 비교적 적절하며, 측방유동압의 최대값은 토층두께(H)의 0.3H 부근에서 발생하였다. 또한 종합형과 Poulos의 분포형태 및 오염되지 않는 연약점토(CL, CH) 지반보다 지표면측으로 상승하여 발생하였다.

• 대한치과보철학회지
• /
• 제29권3호
• /
• pp.1-32
• /
• 1991

Tho osseointegrated dental prosthetic treatment has develped for the edentulous patient with severely resorbed alveolar ridge, and has given us a successful clinical results to date. Nowadays the partially edentulism is included among the indications of the osseointegrated prosthetic treatment. The purpose of this study was to analyze the stress distribution at supporting bone according to the types of connection modality between implant and tooth in the superstructure. Two dimensional finite element stress analysis was applied for this study. FEM models were created using software Super SAP for MBM 16bit personal computer. Three modalities of connection were modeled and analyzed under load condition. The results were as follws: 1. The stress develped at tooth and implant in the cancellous bone was lower in the case of rigid connection than in the case of norigid connection, but higher between the two implants in the case of rigid connection than in the case of nonrigid connection. 2. The stress developed at the cortical bone and at the supporting bone interface was lower in the case of rigid connection than in the case of nonrigid connection 3. The stress developed at the supporting tissue interface of the implant nearby the tooth, was lower in the case of rigid connection than in the case of nonrigid connection. 4. The stress developed at the supporting tissue interface of posteriormost implant, was same between the cases of rigid and nonrigid connection. 5. The stress distribution related to the freestanding case was generally similar to the stress distribution pattern of nonrigid connection case. 6. The magnitude of applied load which produces deformation within elastic limit, had influence on the absolute value of stress, but had no influence on the pattern of stress distribution of the same case.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제18권3호
• /
• pp.470-487
• /
• 1996

The purpose of this study was to investigate the dynamic response of the mandible to impact and provide insight into the fracture mechanism of the mandible, by 3-dimensional finite element method. The finite element model of the mandible was developed and calculated using NASTRAN/XL (MSC co. U.S.A.) and the linear dynamic transient analysis was performed according to the impulsive force direction, force type and impulse time to the mandible. At first, the load was applied on the mandibular symphysis, body, angle and subcondylar area in the horizontal mandibular plane and the computed stress-time histories at 14 locations of the mandible were obtained. Secondly, the impulsive force was directed to the symphyseal area with changing the force magnitude and impulse time, and calculated the node displacement at 8 locations of mandible. The conclusions from from this study were as follows. 1. The appearance of impulsive energy transmission was different to the direction of impulse to the mandible. 2. The impulsive stress and deformation were larger in lingual or medial side than buccal or lateral in the mandible. 3. The velocity, appearance of energy transmission and the fracture pattern in mandible were affected rather impulse time than force. 4. The horizontal impact to the one side of mandible did not have effect on the stress and displacement of contralateral mandible. From the above results, fracture pattern in symphysis can be showed as simple or comminuted, multiple or associated in body and angle and solitary in subcondyle area.

• 한국지구과학회지
• /
• 제35권7호
• /
• pp.501-517
• /
• 2014

주상절리에 관한 최근 연구를 살펴본 결과, 우리나라에 분포하는 주상절리를 이해하고, 활용하기 위한 연구 방향은 다음과 같다; 칼러네이드와 엔테블러춰의 기하학적 형태, 형성 메커니즘과 패턴의 변화, 수평단면과 내부 구조, 주상절리 상하부의 판상절리, 전분 혼합액의 건조실험, 절리 형성에 대한 수치 모델 및 컴퓨터 그래픽 활용, 화산암의 산출 상태에 따른 주상절리 형태와 크기, 모암의 암석학적 및 광물학적 연구. 이와 더불어 지표에 노출된 후의 변질, 풍화작용의 결과로 만들어진 너덜겅, 토르, 타포니 등과 같은 2차적인 경관에 대한 기재도 필요하다. 이 연구는 우리나라 주상절리와 신생대 용암류를 해석하는 중요한 역할을 할 것이다. 또한 연구 성과는 지질관광의 활성화와 지질학습장 측면에서 활용도가 높을 것이다.

• 패션비즈니스
• /
• 제20권6호
• /
• pp.94-110
• /
• 2016

A necessity for infants, diapers are not only used over long durations, but are also in direct contact to the infants' skin, making the choice of diaper to be of utmost importance. Current interest in cloth diapers is rapidly increasing because of issues concerning the baby's health, green environment, and economy. However, previous researches on cloth diapers are limited to simply investigating the form and material of commercial cloth diapers. There are few in-depth researches for the optimal cloth diaper development. This is therefore a fundamental research for the development of optimized cloth diapers, and analyzes the difference in absorption depending on the placement of seam line (liner, darts, and I pattern), the locations of liquid spraying (1 cm and 8 cm ahead of the center), and the amount of liquid capacity (10 and 20 ml). Currently, the development of diaper patterns considers the crotch shape of the infants and the skin length deformation. As a result, in the case of the I-pattern, the horizontal seam line prevents water from spreading to the front and back, thus reducing the absorbed area. This result was more clearly visible when water was sprayed at the center. The effect of the seam line became more obvious when there was more water (20 ml); also, when water was sprayed at the center, more leakage was observed. Using the results of this research, implementation of horizontal seam is expected to prevent the upward spread of urine.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1507-1510
• /
• 2005

This study was carried out as a part of the research on the development of a maskless and electroless process for fabricating metal micro/nanostructures by using a nanoindenter and an electroless deposition technique. $2-\mu{m}-deep$ indentation tests on Ni and Cu samples were performed. The elastic recovery of the Ni and Cu was 9.30% and 9.53% of the maximum penetration depth, respectively. The hardness and the elastic modulus were 1.56 GPa and 120 GPa for Ni and 1.49 GPa and 100 GPa for Cu. The effect of single-point diamond machining conditions such as the Berkovich tip orientation (0, 45, and $90^{\circ}$) and the normal load (0.1, 0.3, 0.5, 1, 3, and 5 mN), on both the deformation behavior and the morphology of cutting traces (such as width and depth) was investigated by constant-load scratch tests. The tip orientation had a significant influence on the coefficient of friction, which varied from 0.52-0.66 for Ni and from 0.46-0.61 for Cu. The crisscross-pattern sample showed that the tip orientation strongly affects the surface quality of the machined area during scratching. A selective deposition of Cu at the pit-like defect on a p-type Si(111) surface was also investigated. Preferential deposition of the Cu occurred at the surface defect sites of silicon wafers, indicating that those defect sites act as active sites for the deposition reaction. The shape of the Cu-deposited area was almost the same as that of the residual stress field.

• 대한전기학회논문지
• /
• 제38권4호
• /
• pp.307-315
• /
• 1989

본 논문에서는 열간압연공정중 소재가 가열로에서 추출되어 조압연 공정을 마치기 까지 소재인 slab의 온도변화추이를 해석키 위하여 rolling process 상에서 온도에 영얄을 미치는 인자인 1) 대기중 복사 및 대류에 의한 냉각 2) 소성가공발열 3) descaling water에 의한 수냉각 4) rolling roll, 운반 roll과의 접촉냉각등 제요인에 관한 사항을 rolling process 상에서의 문제로 평가도입하여 해석하고저 하는 slab 표면에서의 경계조건 설정과 관련한 적용기법을 정립하였고 소재의 냉각 현상을 two dimensional transient heat flow문제로 취급, 유한차분방정식을 이용하여 해석하는 과정과 관련 rollinh작업을 sequence화 하여 적용하는 기법을 제시하였다. simulation 결과 계산치와 실계측편차 (${\pm}18^{\circ}C$)범위내에서 일치함을 제시하였고 또한 rolling event 별로 나타나는 온도하강 pattern이 실제의 압연상황과 잘 일치함을 제시하므로서 본 computer simulation 과정에서 적용한 가정, 조건, 물성치 등의 적정성 등을 입증하였다.

• 한국안전학회지
• /
• 제27권3호
• /
• pp.57-62
• /
• 2012

The purpose of this paper is to find dangerous factors of a water purifier when water leaks due to inappropriate use and analyze the patterns of damaged parts in order to provide data for the examination of the cause of the problem. If the water purifier is inspected and managed by a non-specialist, when the FLC(Float Level Controller) at the top is inclined, water leakage may occur to the water purifier. The leaked water flows onto the cables and hoses and enters the thermostat terminal, heater, PCB, power supply connection connector, etc., becoming a dangerous factor that may cause a system failure, fire, etc. Due to the water that entered the input terminal, low noise and white smoke were generated at first. However, the flame gradually propagated due to the continuous inflow of moisture. It was found that when moisture reached the PCB, a carbonized conductive path was formed at the varistor terminal, input terminal, semiconductor device terminal, etc., and the flame became larger, which might result in a fire. From the metal microscope analysis of a damaged condenser terminal, it was found that the amorphous structure unique to copper cable disappeared, and voids, boundary surface and disorderly fine particles occurred. Also, in the case of the connector into which moisture penetrated, fusion and deformation occurred at the cable connection clips. The result of analysis of the power supply cable connector using a thermal image camera showed that most of the heat was generated from the cable connection clips and the temperature at the connection center was normal.

• 한국주조공학회지
• /
• 제34권5호
• /
• pp.170-178
• /
• 2014

Using the Gleeble test, the effects of [Mn/S] ratios and the presence of sulfides on the high-temperature fracture morphology of heavy-section steel castings were analysed via the observations of the microstructures. The specimens for which the [Mn/S] ratio was in the range of 60~80 showed a ductile fracture morphology with an area reduction of more than 60%, while some specimens with similar [Mn/S] ratios showed a brittle fracture morphology with an area reduction of 0.0% due to the liquidation of sulfides at the grain boundary. The fracture morphology was classified into three types in the Gleeble high-temperature tensile test specimens. The first type showed dimple formation at the grain boundary, the formation of globular MnS sulfides, and plastic deformation of sulfides at an elevated temperature, indicating a needle-point type of ductile fracture with area reductions of 96.0~97.8%. The second type was a knife-edge type brittle fracture with an area reduction of 0.0% due to the film-type liquidation of sulfides at the grain boundary, band-type liquidation, and the liquidation of a terraced nipple pattern. The third type was the typical ductile fracture with an area reduction of 31.3~81.0%, in accordance with the mixture of dimples with in the grains and terraced nipple pattern at the grain boundary.

• Journal of Chest Surgery
• /
• 제25권7호
• /
• pp.693-701
• /
• 1992

Extracorporeal cardiopulmonary bypass[CPB] has been associated with a wide variety of hematologic derangements, including a transient deformation and hemolysis of red blood cells[RBCs], which is supposed to be due to mechanical trauma and/or metabolic alterations. Since membrane integrity is, in part, maintained by energy requiring process, inadequate function of erythrocyte glycolytic pathway, which is inevitalble during CPB, may cause depletion of high energy phosphate pool and result in hemolysis. The authors performed an investigation to assess whether administration of Fructose-l, 6-diphsphate [FDP], which has been known to enhance intracellular glycolytic activities, could counteract erythrocyte hemolytic events caused by CPB. Sixty pateints with cyanotic congenital heart diseases, who underwent open heart surgery under CPB longer than 60 minutes, were randomly divided into two groups depending on whether use of FDP[Group FDP] or not[Group Control]. The age, sex, CPB time, preoperative hemoglobin level, disease entities were all similar[Table 1], and membrane type oxygenators were used in all patients. In Group, FDP, a dose of 250mg/kg body weight of FDP was administered by intravenous dripping every 12 hours from the morning of the operation to postoperative 48 hours, To demonstrate the degree and pattern of hemolysis of erythrocyte, reticulocyte count, indirect /direct bilirubin, haptoglobin, plasma hemoglobin, lactate dehydrogenase were measured every 12 hours from the time of cessation of CPB to 48 hours and RBC morphologic study, osmotic fragility test were done every 24 hours. All parameters revealed less hemolytic in group FDP [Fig. 1~5], though the differences between two groups were not significant, except plasma hemoglobin, lactate dehydrogenase changes. A pattern of sequential changes of plasma hemoglobin, lactate deh-ydrogenase showed the highest level at the time of CPB stop and abrupt decrease in following 24 hours in both groups, and statistically significant differences were demonstrated in group FDP at least for the first 12 hours postoperatively[p<0.05]. The authors conclude that they can expect the benificial effect of FDP on the maintenance of membrane stability of RBC probably by energy enhancement during the shock status of CPB, but FDP could not completely prevent the damaging effect on RBC by cardiopulmonary bypass