• 비파괴검사학회지
• /
• 제28권2호
• /
• pp.137-143
• /
• 2008

안경용 구면 렌즈는 굴절력에 따라 (+)디옵터와 (-)디옵터 렌즈로 구분할 수 있다. 렌즈에 가해지는 외부 열원에 의해서 생기는 열변형은 디옵터의 종류에 따라 다르게 나타난다. 본 논문에서는 빛의 가간섭성을 이용하여 물체의 변형을 비접촉으로 정확하게 측정할 수 있는 전자처리 스페클법을 이용하여 렌즈에 발생되는 열변형을 정량적으로 측정하였다. 외부 열원에 의한 온도 분포의 측정은 실시간 비접촉으로 온도를 측정할 수 있는 적외선 열화상 카메라를 사용하였다. 실험은 총 14종의 플라스틱 상용 안경 렌즈를 대상으로 수행하였다. 동일한 온도차에서 (+)디옵터 렌즈의 경우에는 디옵터의 증가에 따라서 열변형량이 증가하였다. 반면에 (-)디옵터 렌즈는 디옵터의 증가와 관계없이 열변형량이 거의 선형적이었다. 또한 동일한 디옵터에서 (+)디옵터 렌즈의 열변형량이 (-)디옵터 렌즈의 열변형량 보다 작았다. 따라서 본 논문에서는 렌즈에 열이 가해지는 경우 렌즈의 열변형량을 정량적으로 측정할 수 있음을 확인하였다.

• Design & Manufacturing
• /
• 제2권6호
• /
• pp.43-48
• /
• 2008

Magnesium alloys have given high attention to the industry of light-weigh as automobile and electronics with aluminium, titanium and composite alloys due to their high strength, low specific density and good damping characteristics. But the magnesium contained structures under high temperature have the problems related to creep deformation and rupture life, which is a reason of developing the new material against creep deformation to use them safely. The purpose of this study is to predict the creep deformation mechanism and rupture time of AZ31 magnesium alloy. For this, creep tests of AZ31 magnesium alloy were done under constant creep load and temperature with the equipment including automatic temperature controller with acquisition computer. The apparent activation energy Qc, the applied stress exponent n and rupture life have been determined over the temperature range below 0.5Tm and stress range of 109~187MPa, respectively, in order to investigate the creep behavior. AZ31 Magnesium alloy identify the activation energy for creep deformation and the stress dependence to creep rate at below 0.5Tm, and then investigate the mechanism for creep deformation and creep rupture life of AZ31 Magnesium alloy.

• Design & Manufacturing
• /
• 제7권1호
• /
• pp.60-63
• /
• 2013

Recently, Silicone that one of the thermo-sets is used to making optical products such as LED lenses because of excellent thermal properties. LED lenses are required to keep the precise dimensions, so they must be molded to have the minimum deformation. Thermo-sets have the expansion characteristic on the part of thermal property, it is important to optimize the cure condition so that the deformation of the part become minimum. In this study, to investigate the relationship between the shrinkage by the curing and expansion by the thermal properties of the resin, reactive injection experiment was performed by setting the variables such as mold setting temperature, cure time. As a result, it was confirmed that there was a interval while the thermal properties were transferred to more active during the cure process. It is expected to help in determining the reactive injection molding conditions of the thermo-set parts as well as LED lens in order to reduce the amount of deformation.

• 대한조선학회논문집
• /
• 제53권3호
• /
• pp.195-200
• /
• 2016

In this study, compression tests for the polyisocyanurate foam which is recognized as the insulation material for the storage tank of the liquefied natural gas (LNG) were carried out for investigation of the material characteristic of mechanical behavior. Deformation recovery ratio according to the various initial deformation levels were estimated and the mechanical behavior of foams that are experienced compressive deformation was also obtained experimentally. The test results were analyzed based on the conditions of initially applied strain level and engineering strain rate.

• 한국지반신소재학회논문집
• /
• 제3권4호
• /
• pp.29-40
• /
• 2004

지오그리드의 장기설계 인장강도는 크리프 변형, 시공시 손상 및 환경적 요인(온도, 화학적 손상, 생물학적 손상)에 영향을 받는다. 특히, 크리프 변형 및 시공시 손상이 가장 크게 영향을 미치는 요인으로서 반영된다. 따라서 본 연구에서는 국내에서 많이 사용되고 있는 6종류의 지오그리드를 대상으로 일련의 현장 내시공성시험 및 크리프시험을 수행하여, 다양한 성토재 종류별 지오그리드의 시공시 강도감소와 크리프 변형 특성을 평가하였다. 연구결과, 지오그리드의 장기 설계인장강도는 지오그리드의 재료 및 제조방식에 크게 영향을 받으며, 최대인장강도의 크기에는 그다지 영향을 받지 않는 것으로 나타났다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 춘계학술대회 논문집
• /
• pp.588-595
• /
• 2014

In this paper, analysis of the vibration Characteristic for the Mine Detectable Test Platform is described. The test platform system is the multi-sensor mine detectable vehicle. This multi-sensor mine detectable unit is more efficient detection performance than other conventional methods. The test platform system has five subsystems, the UWB(Ultra Wide Band) sensor scanner, the MD(Metal Detector) sensor scanner, the neutron sensor scanner, and the detectable vehicle. We perform the vibration tests for the test platform and analyze the vibration characteristic, such as the max displacement, the max deformation and the max Von-Misses Stress.

• 한국소음진동공학회논문집
• /
• 제24권12호
• /
• pp.927-934
• /
• 2014

In this paper, analysis of the vibration characteristic for the mine detectable test platform is described. The test platform system is the multi-sensor mine detectable vehicle. This multi-sensor mine detectable unit is more efficient detection performance than other conventional methods. The test platform system has five subsystems, the UWB(ultra wide band) sensor scanner, the MD(metal detector) sensor scanner, the ND(neutron detector) sensor scanner, and the detectable vehicle. We perform the vibration tests for the test platform and analyze the vibration characteristic, such as the max displacement, the max deformation and the max Von-Misses stress.

• 조명전기설비학회논문지
• /
• 제15권6호
• /
• pp.58-64
• /
• 2001

본 논문은 LVI시험기 및 모델 변압기의 설계와 제작에 관하여 기술하였다. 이들을 이용하여 LVI 시험 분석기 술을 개발하였다. LVI시험기는 본테, 터미널 박스 및 케이블로 구성하였고, ANSI규격에서 요구하는 출력특성을 갖는 것으로 평가되었다. 모델변압기는 탭들을 만들어 변압기의 권선변형 모델을 만들 수 있도록 하였고, LVI시험기로써 실험을 실시하여 LVI시험분석 기술에 관하여 논하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.330-333
• /
• 2002

This study Presents improvement of Precision in the non-contacted laser application measuring techniques. The phase map of deformation obtained by phase shifting method in Electronic Speckle Pattern Interferometry displays the wrapped image by the arctangent function, which is a characteristic of 4-step phase shifting method. To obtain deformation distribution from the results, the wrapped phase map is processed by an unwrapping method. But a previous method cannot apply discontinuous object as like plate with a circular hole to obtain precious deformation distribution To solve this problem, new algorithm is developed and the result is compared with previous method.

• 한국공작기계학회논문집
• /
• 제11권4호
• /
• pp.26-33
• /
• 2002

One characteristic of Fine-Blanking is that the size and the direction of stress and strain are very complex in the plastic flow according to the condition of blanking. Especially, they are affected by the clearance of punch and die, by the force of blanking holder and by the force of counter punch. The purpose of this research is to how the deformation behavior in shear zone more clearly, based on Green & Cauch's large deformation theory. The deformation behavior and cracks were investigated in each step of shear, according to punch penetration increase, the use of V-indenter ring and the hardness of materials. This research found that the transforming behavior was the same as pure discretion and the cracks could be prevented when hardness is low.