• Industrial Engineering and Management Systems
• /
• v.12 no.4
• /
• pp.380-388
• /
• 2013

Large variation in electrocardiogram (ECG) waveforms continues to present challenges in defining R-wave locations in ECG signals. This research presents a procedure to extract the R-wave locations by forward-backward (FB) algorithm and classify the arrhythmic beat conditions by using RR intervals. The FB algorithm shows forward and backward searching rules from QRS onset and eliminates lower-amplitude signals near the baseline using a statistical process control concept. The proposed algorithm was trained the optimal parameters by using MIT-BIH arrhythmia database (MITDB), and it was verified by actual Holter ECG signals from a local hospital. The signals are classified into normal (N) and three arrhythmia beat types including premature ventricular contraction (PVC), ventricular flutter/fibrillation (VF), and second-degree heart block (BII) beat. This work produces 98.54% accuracy in the detection of R-wave location; 98.68% for N beats; 91.17% for PVC beats; and 87.2% for VF beats in the collected Holter ECG signals, and the results are better than what are reported in literature.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.06a
• /
• pp.349-352
• /
• 2005

The energy management of an HEV using optimal control and global optimization is thought to be closest to the best operation of the system. However, there are some controversies on the ways of defining the optimization problems and constituting the optimal control simulators. Here, we presented a simulator which adopts the concept of equivalent fuel economy and leads the vehicle to run in a more efficient way. In order to realize the optimal operation of the HEV and check the validity of the control logics, we also developed a forward-facing simulator. The simulator was developed with the Cruise and MATLAB co-simulation interface. Especially, neural network controller was used for the hybrid control module in the simulator. With the simulator, the optimal operation could be converted into hybrid control rules and the validity of the operation was verified.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.57
• /
• pp.3-34
• /
• 2013

In the international sales contract, long-term contracts often face hardship in fulfilling the original contract terms by relevant parties due to rapid change and uncertainty of political and economic circumstance. In this case, party who faces hardship of fulfillment terminates contract or demands adaptation to contract condition but if opponent doesn't accept this, it proceeds to commercial dispute needing legal interpretation. Generally it is wise to set forth governing law in contract between parties in the case of international contract, for legal stability. One of universal governing law which relevant parties select by agreement to solve economical hardship of fulfillment is PICC. PICC defines the hardship in detail for renegotiation on following hardship of fulfillment unexpected. In the case of failing renegotiation, Court(arbitral tribunal) conducts termination to contract or adaptation to contract condition through arbitration or mediation. In conclusion, when signing international long-term contract, it is desirous to handle dispute effectively by inserting provisions which can deal with economical hardship in contract or defining PICC as governing law in the case of hardship incurred. It is because it is realistic to handle dispute smoothly to the extent that both parties can be satisfied in the case of hardship incurred, though international contract should be fulfilled.

• Structural Engineering and Mechanics
• /
• v.76 no.2
• /
• pp.193-205
• /
• 2020

The growing need for assuring efficient and sustainable investments in civil engineering structures has determined a renovated interest in the rational design of such structures from designers, clients and authorities. As a result, risk-informed decision-making methodologies are increasingly being used as a direct decision tool or as an upper-level layer from which performance-based approaches are then calibrated against. One of the most important and challenging aspects of today's structural design is to adequately handle the system-level effects, the known unknowns and the unknown unknowns. These aspects revolve around assessing and evaluating relevant damage scenarios, namely those involving unacceptable/intolerable damage levels. Hence, the importance of risk analysis of disproportionate collapse, and along with it of robustness. However, the way robustness has been used in modern design codes varies substantially, from simple provisions of prescriptive rules to complex risk analysis of the disproportionate collapse. As a result, implementing design for robustness is still very much a grey area and more so when it comes to defining means to quantify robustness. This paper revisits the most common robustness frameworks, highlighting their merits and limitations, and identifies one among them which is very promising as a way forward to solve the still open challenges.

• The KIPS Transactions:PartD
• /
• v.11D no.7 s.96
• /
• pp.1443-1450
• /
• 2004

The clustering characteristics for a number of classes, and defining the inheritance relations between the classes is a difficult and complex problem in an early stage of object oriented software development. We discuss a traditional iterative approach for the reuse of the existing classes in a library and an integrated approach to creating a number of new classes presented in this study. This paper formulates a character-istic clustering problem for zero-one integer programming and presents a network solution method with illustrative examples and the basic rules to define the inheritance relations between the classes. The network solution method for a characteristic clustering problem is based on a distance parameter between every pair of objects with characteristics. We apply the approach to a real problem taken from industry.

• Journal of Communications and Networks
• /
• v.3 no.4
• /
• pp.297-306
• /
• 2001

In the last couple of years service management has gained more and more momentum in the research community. Nowadays, as complexity of IT-services is increasing, these services are usually composed of interdependent, layered services hosted by various providers. Therefore, a strong cooperation of providers involved in service provisioning is needed, especially regarding their management processes and systems. One important step is to establish a common understanding about service-related terms in order to be able to specify service functionality and the resulting management tasks. Additionally, means to analyze and identify the necessary actors and the corresponding inter- and intra-organizational relationships are needed. This paper presents an extended version of the MNM service model which provides a generic model defining commonly needed service-related terms, concepts and structuring rules in a general and unambiguous way. Furthermore, we demonstrate the application of the MNM service model by modeling a riser help desk service based on a concrete scenario. The experience gained from modeling is used to discuss the benefits of service modeling in general.

• Structural Engineering and Mechanics
• /
• v.21 no.4
• /
• pp.407-422
• /
• 2005

Plate elements in fully profiled sandwich panels are generally subjected to local buckling failure modes and this behaviour is treated in design by using the conventional effective width method for plates with a width to thickness (b/t) ratio less than 100. If the plate elements are very slender (b/t > 1000), the panel failure is governed by wrinkling instead of local buckling and the strength is determined by the flexural wrinkling formula. The plate elements in fully profiled sandwich panels do not fail by wrinkling as their b/t ratio is generally in the range of 100 to 600. For this plate slenderness region, it was found that the current effective width formula overestimates the strength of the fully profiled sandwich panels whereas the wrinkling formula underestimates it. Hence a new effective width design equation has been developed for practical plate slenderness values. However, no guidelines exist to identify the plate slenderness (b/t) limits defining the local buckling, wrinkling and the intermediate regions so that appropriate design rules can be used based on plate slenderness ratios. A research study was therefore conducted using experimental and numerical studies to investigate the effect of plate slenderness ratio on the ultimate strength behaviour of foam supported steel plate elements. This paper presents the details of the study and the results.

• Journal of Information Processing Systems
• /
• v.10 no.3
• /
• pp.365-383
• /
• 2014

Service-oriented computing offers efficient solutions for executing complex applications in an acceptable amount of time. These solutions provide important computing and storage resources, but they are too difficult for individual users to handle. In fact, Service-oriented architectures are usually sophisticated in terms of design, specifications, and deployment. On the other hand, workflow management systems provide frameworks that help users to manage cooperative and interdependent processes in a convivial manner. In this paper, we propose a workflow-based approach to fully take advantage of new service-oriented architectures that take the users' skills and the internal complexity of their applications into account. To get to this point, we defined a novel framework named JASMIN, which is responsible for managing service-oriented workflows on distributed systems. JASMIN has two main components: unified modeling language (UML) to specify workflow models and business process execution language (BPEL) to generate and compose Web services. In order to cover both workflow and service concepts, we describe in this paper a refinement of UML activity diagrams and present a set of rules for mapping UML activity diagrams into BPEL specifications.

• Journal of Korean Society for Quality Management
• /
• v.44 no.4
• /
• pp.735-749
• /
• 2016

Purpose: This study is addressing the establishment of the knowledge information system supplying the quality management of weapon system. It is going to support the continuous quality management through the linkages and integration between the product structure and the quality information. Methods: The interrelated relationship of the product structure information and quality information of weapon system would be expressed explicitly by taking advantage of the ontology concept. The quality information of distributed systems would be integrated through the SOA(Service Oriented Architecture)-based Web services. After defining the inference rules, which could be utilized in the quality management, in the constructed knowledge information system, the quality information would be inferred through the queries. Results: By building the integrated quality information knowledge system through the ontology and SOA, the connectivity between the product structures and dispersed quality information was enhanced. The utility and applicability of this study were checked up through the inferences on the products and quality information by using the information built by the semantic relationship of facts. Conclusion: We established the knowledge and information system as a systematic approach to support the quality management of weapon system. This is not affected by the organizations and systems, and it seems that it could be utilized across the quality management as the efficient knowledge sharing architecture supporting the quality management of weapon systems in the aspect of the product integration.

• The Korean Society of Law and Medicine
• /
• v.15 no.1
• /
• pp.11-34
• /
• 2014

Promulgation of the medical practice rule without specific definition in Medical Law has brought about many constitutional issues. The major issue is that the law has the government punish unlicensed medical practice without defining what it is. Instead, the law chooses a license-centered structure of criminal punishment for medical malpractice, saying "no one can practice medicine without the government-approved license." This regulation violates the rule of "void for vagueness" based on the principle of "nulla poena nullum crimen sine lege." Judicial interpretation should be required for a citizen to understand the Medical Law provision intuitively. In addition, the law infringes upon the freedom of occupation of the unlicensed and the licensed who wish to extend his or her practice area for "holistic medicine." The central issue of the law is that it was established under no ground of professionalism even though medical practice has been understood professional. The government has centrally controlled the medical field for its needs. Lastly, the current law violates the right of medical selection of the consumers of medicine. Because patients have the right of health and life, they have to hold the latitude of selection for medical treatments. Especially, they should have an opportunity for considering the Complementary and Alternative Medicine if they want. But under the current rules, this medicine is not permitted. To correct those problems, a new provision for the definition of medical practice should be adopted at once.