• Proceedings of the Korea Contents Association Conference
• /
• 2015.05a
• /
• pp.251-252
• /
• 2015

본 연구는 국방규격서의 전문어, 오용어, 어문규정 및 순화어 미(未)준수 어휘를 추출, 정의 또는 순화어로 정제하는 맵핑구조를 제시, 민 군규격용어 표준화를 위한 정보업무 로드맵을 구축하여 민간용어와의 호환성 및 일관성을 유지할 수 있는 지원체계를 연구하였다. 대상 규격용어는 KS용어표준 원칙을 기본으로 한 신뢰도 평가와 텍스트 마이닝 (text mining)빈도분석을 이용하여 선정하였으며, 시소러스(thesaurus) 체계를 삽입, 개념기반 서비스의 확장성을 제시하였다. 이를 기반으로 산출된 규격용어 DB는 민간 및 국방 관련분야의 용어표준관리 정보체계에 검색 및 용어설명에 활용될 수 있다.

• Journal of the Korea Society for Simulation
• /
• v.14 no.2
• /
• pp.15-24
• /
• 2005

The goal of a distributed simulation such as battle field simulation is to combine all kinds of simulations in the same synthetic environment and to make people interact at the same time. It is a key issue to share the same synthetic environment among simulations. To support reusability and affordability in the modeling and simulation area, DMSO(Defense Modeling and Simulation Office) of USA developed concepts such as HLA(High Level Architecture) and SEDRIS (Synthetic Environmental Data Representation and Interchange Specification). In the industrial simulation area, the digital manufacturing is the main stream. To reduce cost and to reuse simulation environment, the standardization becomes the focus of digital manufacturing. This study proposes to use SEDRIS to improve interoperability of manufacturing data. The simulation data of DELMIA, which is a leading commercial digital manufacturing solution, is mapped and translated into the SEDRIS transmittal format. Mapping of the manufacturing simulation data and the synthetic environment are implemented and verified through experiments.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.10
• /
• pp.27-33
• /
• 2016

Military textiles with breathable waterproof materials are expanding as form of winter clothes. Waterproof moisture-permeable clothes are very important for soldiers to survive in cold weather operations because they prevent loss of body heat from the penetration of water into the human body. Korea military uses the water resistance and moisture permeability to test the performance of waterproof moisture-permeable materials. Moisture permeability is measured according to the amount of evaporated water vapor passing through a fabric under specified temperature and humidity by using acetic acid potassium presented in KS K 0594. However, the test procedure for measuring the moisture permeability in the standard is presented only briefly and the preparation procedures for the test in accredited testing institutions are applied differently, leading to significant deviation of the results. This paper compares the procedures of testing institutions and examines the factors that affect moisture permeability. Finally, we propose a procedure to reduce the deviation of results and apply the proposed procedure in testing institutions. Our analysis results with one-way ANOVA under significant level (0.05) confirm that the deviation of results is reduced.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.9
• /
• pp.97-104
• /
• 2021

Since 1993, Successfully localized naval combat System has made steady development on various domestic and foreign ships. On the other hand, Engineering Control System(ECS) is dependent on foreign companies. Therefore, there is a lot of interest and research in the localization of ECS in the navy defense industry. As one of various studies, a preliminary study of domestic ECS software that can be commonly applied to naval ships is in progress. This paper propose Ecs Obts Scalable Platform(EOSPA) as the standard architecture of ECS On-Board Training System(OBTS) software by applying object-oriented programming and standardization. And this introduces EOSPA's structure, function, and features of each component. Furthermore, high reusability and maintainability are expected in the development of ECS OBTS software applying EOSPA in various naval ships.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.9
• /
• pp.492-500
• /
• 2018

The performance evaluation of cold weather clothing is mainly carried out with thermal resistance. However, the results of the revised test method regarding the same specimen were decreased compare to previous one. In addition, there were deviations of the results among the authorized testing institutes according to the different interpretation of the KS test method. This makes it a considerable difficulty to the quality assurance of combat supplies. The purpose of this study is to minimize the variation of the results before and after the revision by analyzing the cause of the decrease in the heat insulation rate according to the revised test method. For this purpose, the difference between the test conditions before and after the revision of KS is analyzed and the possible results are reviewed. In addition, we want to minimize the result deviation between testing laboratories by analyzing the cause of the result deviation between test laboratories according to arbitrary interpretation of the standard. Based on this, we propose a standardized test method to prevent the decrease of the heat insulation rate by checking the pre-revision test method and the condition with the least deviation.

• Journal of the Korea Society for Simulation
• /
• v.28 no.2
• /
• pp.159-167
• /
• 2019

In the field of defense M&S, we are actively pursuing researches that interoperable multiple war game models to simulate various combat environments at the same time. Although the 'unit DB(Database)' for operating the war game models is originated from the identical data, it has been recognized that the method of expressing the attribute of the data is different and the cross reference is impossible. As a result, it makes unnecessary time and effort in establishing the same unit DB in the organizations that operate the war game model. In this study, a method of reusing the unit DB of the training war game model to the analysis war game model with similar resolution and simulated logic was applied to the actual field. For this purpose, we defined the procedure for converting the unit DB by analyzing metadata of the 'Chang-Jo21', a combat training model for corps and division, and the 'Vision21', an analysis model for corps and division operation plan. And we introduced an algorithm that can map different metadata of two unit DBs. This study was meaningful as the first attempt to map and integrate heterogeneous metadata semantically for the reuse of unit DB between different war game models in defense M&S field. Also, it provided implications for the necessity of paradigm shift that reuse of the unit DB between two different war game models is possible and the need for standardization of the unit DB metadata in the defense M&S filed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.6
• /
• pp.757-765
• /
• 2021

To carry out multi-domain operations included in the U.S. Department of Defense's national security strategy in 2018, timely data sharing between C4I systems is critical. Several studies of the Korean military have also raised the problems of interface and standardization between C4I systems, and it is necessary to establish a new plan to solve this problem. In this study, a solution to the problem was derived through case analysis that the U.S. Department of Defense has been pursuing for about 20 years to implement the data strategy after establishing the data strategy in 2003. and by establishing a data strategy suitable for the ROK military C4I system operating environment, developing a data model, selecting a standard for data sharing, and proposing a shared data development procedure, we intend to improve the data sharing capability between ROK military C4I systems.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.16 no.9
• /
• pp.3029-3042
• /
• 2022

For over half a century, the United States (US) and its coalition military aircrafts have been using Ultra High Frequency (UHF) band analog modulation (AM) radios in ground-to-air communication and short-range air-to-air communications. Evolving from this, since 2007, the US military and the North Atlantic Treaty Organization (NATO) adopted HAVE QUICK to be used by almost all aircrafts, because it had been revealed that intercepting and jamming of former aircraft communication signals was possible, which placed a serious threat to defense systems. The second-generation Anti-jam Tactical UHF Radio for NATO (SATURN) was developed to replace HAVE QUICK systems by 2023. The NATO Standardization Agreement (STANAG) 4372 is a classified document that defines the SATURN technical and operational specifications. In preparation of this future upgrade to SATURN systems, in this paper, the SATURN technical and operational specifications are reviewed, and the network synchronization, frequency hopping, and communication setup parameters that are controlled by the Network (NET) Time, Time Of Day (TOD), Word Of Day (WOD), and Multiple Word of Day (MWOD) are described in addition to SATURN Edition 3 (ED3) and future Edition 4 (ED4) basic features. In addition, an anti-jamming performance analysis (in reference to partial band jamming and pulse jamming) and the time delay queueing model analysis are conducted based on a SATURN transmitter and receiver assumed model.

• Journal of Positioning, Navigation, and Timing
• /
• v.7 no.4
• /
• pp.295-305
• /
• 2018

Network RTK is a highly practical technology that can provide high positioning accuracy at levels between cm~dm regardless of user location in the network by extending the available range of RTK using reference station network. In particular, unlike other carrier-based positioning techniques such as PPP, users are able to acquire high-accuracy positions within a short initialization time of a few or tens of seconds, which increases its value as a future navigation system. However, corrections must be continuously received to maintain a high level of positioning accuracy, and when a time delay of more than 30 seconds occurs, the accuracy may be reduced to the code-based positioning level of meters. In case of SSR, which is currently in the process of standardization for PPP service, the corrections by each error source are transmitted in different transmission intervals, and the rate of change of each correction is transmitted together to compensate the time delay. Using these features of SSR correction is expected to reduce the performance degradation even if users do not receive the network RTK corrections for more than 30 seconds. In this paper, the simulation data were generated from 5 domestic reference stations in Gunwi, Yeongdoek, Daegu, Gimcheon, and Yecheon, and the network RTK and SSR corrections were generated for the corresponding data and applied to the simulation data from Cheongsong reference station, assumed as the user. As a result of the experiment assuming 30 seconds of missing data, the positioning performance compensating for time delay by SSR was analyzed to be horizontal RMS (about 5 cm) and vertical RMS (about 8 cm), and the 95% error was 8.7 cm horizontal and 1cm vertical. This is a significant amount when compared to the horizontal and vertical RMS of 0.3 cm and 0.6 cm, respectively, for Network RTK without time delay for the same data, but is considerably smaller compared to the 0.5 ~ 1 m accuracy level of DGPS or SBAS. Therefore, maintaining Network RTK mode using SSR rather than switching to code-based DGPS or SBAS mode due to failure to receive the network RTK corrections for 30 seconds is considered to be favorable in terms of maintaining position accuracy and recovering performance by quickly resolving the integer ambiguity when the communication channel is recovered.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.1
• /
• pp.185-194
• /
• 2018

This study investigates the limitations of blockchain technology and the ways to improve it by using Delphi technique. Limit factors and improvement measures are classified into technology, service, and legal system. First, from a technical point of view, lack of standardization of the technology, insufficiency of integration, lack of scalability, unclear cancellation or correction policy, excessive cost of transaction verification, insufficient personal information protection and not enough to respond to hacking defense were the limiting factors. In order to improve these, the followings; ensuring standardization, securing integration and scalability, establishing cancellation of each applicable data, establishment of correction policy, efficiency of verification cost, the protection of personal information and countermeasure against hacking are provided. The related technology development and countermeasures must be established to effectively introduce the blockchain technology to the market. Second, in the early stage of blockchain service, it showed lack of utilization of the blockchain, security threat, shortage of skilled workers, and lack of legal liability. As a solution to these problems, it is necessary to suggest various applications, against security threat, training professional manpower, and securing legal responsibility. It should also provide a foundation for providing institutionally stable services. Third, from as legal system point of view, inadequate legal compliance, lack of relevant regulation, and uncertainty in the regulation were the limiting factors. Therefore establishing a legal system, which is the most important area for activating the service, should be accompanied by the provision of legal countermeasures, clearness of regulations and measures to be taken by relevant governmental authorities. This study will contribute as a reference for a research, related to the blockchain.