• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1991.11a
• /
• pp.126-132
• /
• 1991

Various diagnostic techniques have been proposed according to the development of the engineering. and the machine elements. Specially. since the bearing is an essential component in rotating Machine. Many researchers have been done an earler detection and a exact diagnosis of defects on bearing. In this study, the technique which differ from past diagnosises techniques in frequency domain such as Spectral analysis is proposed. Parametric ARMA model was utilized to define the system using tire series directly. Based on the resulted ARMA parameters, more precies and faster diagnosis system through Neural network was presented.

• Journal of Korean Neurosurgical Society
• /
• v.63 no.3
• /
• pp.314-320
• /
• 2020

Retained medullary cord (RMC) is a relatively recent term. Pang et al. newly defined the RMC as a late arrest of secondary neurulation leaving a non-functional vestigial portion at the tip of the conus medullaris. RMC, which belongs to the category of closed spinal dysraphism, is a cord-like structure that is elongated from the conus toward the cul-de-sac. Because intraoperative electrophysiological confirmation of a non-functional conus is essential for the diagnosis of RMC, only a tentative or an assumptive diagnosis is possible before surgery or in cases of limited surgical exposure. We suggest the term 'possible RMC' for these cases. An RMC may cause tethered cord syndrome and thus requires surgery. This article reviews the literature to elucidate the pathoembryogenesis, clinical significance and treatment of RMCs.

• Journal of Welding and Joining
• /
• v.21 no.6
• /
• pp.33-39
• /
• 2003

Wavelet transform analysis results show a spectrum energy distribution of CWT along scale factors distinguish the partial, full and over penetration in a electron beam welding by analyzing the curve of spectrum energy at small scale, middle and large scale range, respectively. Two types of signals collected by Ion collector and x-ray sensors and analyzed. The acquired signals from sensors are very complicated since these signals are very closely related the dynamics of keyhole which interact the very high density energy with materials during welding. The results show the wavelet transform is more effective to diagnosis than Fourier Transform, further for the general welding defects which are not a periodic based, but a transient, non-stationary and time-varying phenomena.

• Proceedings of the KACD Conference
• /
• 2001.05a
• /
• pp.241-242
• /
• 2001

Tooth resorption os perplexing problem for all dental practitioners. The etiology factors and diagnosis are vague, chosen treatment dose not prevent the rapid disappearance of the calcified dental tissues. Since the etiologic factors, diagnosis, treatment and prognosis differ for these various types of resorptive defects, it is important to diagnose resorption radiographically or clinicall and distinguish internal from external resorption. Following these cases are internal root resorption, external root resorption of serious complication subsequent to avulsion and traumatic injury.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.54 no.8
• /
• pp.343-349
• /
• 2005

The gas in oil analysis of transformer is the most widely used technology for diagnosis of transformer in the world. It has brought excellent results to prevention of transformer failure. The criteria for maintenance and judgement, however, is still required continuous supplement to improve the accuracy of the diagnosis on the basis of accumulated data of gas analysis and investigations in the transformer In this study, the relationship between the detection rate of the defects and the source of troubles are analyzed according to the investigation in the transformer, which was conducted by KEPCO in 2004. As a result, the validity of the criteria being used at present was examined thoroughly.

• Journal of Advanced Marine Engineering and Technology
• /
• v.26 no.2
• /
• pp.192-199
• /
• 2002

In continuous galvanizing process, the mass of zinc deposited and its distribution are controlled by the air pressure, effective distance from the air knife nozzle to the steel strip surface and line speed. Coating defects are resulted from the unbalance of these control factors and the inaccuracy of coating equipments. This paper investigates the main cause of coating deviation and a new air knife system for control of coating thickness was developed. We investigate dynamic pressure variation by air knife types. It is found that the coating deviation is caused by the unbalance of dynamic pressure, the irregularity of strip position, and the strip vibration. Formulating a useful coating model by using present working condition, an optimal working condition is suggested. The productivity and coating quality are improved by applying the result of this research at the shop floor.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.46 no.6
• /
• pp.428-434
• /
• 2020

Orbital floor blowout fractures can result in a variety of signs and symptoms depending on the severity of the bone defect. Large defects often result in enophthalmos and restriction of ocular movement; yet the timing of surgery can be delayed up to two weeks with good functional outcomes. In contrast, an orbital trapdoor defect with entrapment of the inferior rectus muscle usually elicits pain with marked restriction of the upward gaze and activation of the oculocardiac reflex without significant dystopia or enophthalmos. When autonomic cardiac derangement is diagnosed along with an orbital floor fracture, it has been suggested that the fracture should be treated immediately. Otherwise, it will result in continued hemodynamic instability and muscular injury and may require a second surgery. This article reports the management of an unusual presentation of a trapdoor blowout orbital floor fracture surgery with oculocardiac response in an adult, with emphasis on its pathophysiology, management, and differential diagnosis.

• Journal of The Korean Society of Inherited Metabolic disease
• /
• v.23 no.2
• /
• pp.21-30
• /
• 2023

Inherited metabolic disorders (IMD) are a group of disorders caused by defects in specific biochemical pathways. Up to 85% of IMD display predominantly neurological manifestations by affecting neurodevelopment or causing neurodegeneration. These neurometabolic disorders present with a variety of neurological and non-neurological manifestations. Early diagnosis of IMD is important because some disorders can be treated or improved with specific treatment if detected early. For prompt diagnosis and treatment, it is important to suspect IMD by being familiar with the clinical characteristics, biochemical abnormalities, and characteristic neuroimaging patterns that appear in IMD. Genetic testing, including next-generation sequencing, is also important in diagnosing IMD. During the follow-up of patients with IMD, it is necessary to conduct regular physical and neurological examinations in addition to disease-specific management.

• Childhood Kidney Diseases
• /
• v.21 no.2
• /
• pp.107-113
• /
• 2017

Purpose: This study aimed to evaluate the relationships between 99mTecnicium-dimercaptosuccinic acid (DMSA) scan findings and clinical parameters including age and fever duration. Methods: The positive rates for abnormal DMSA scans were analyzed according to the age of patients, fever duration prior to admission, and total fever duration. DMSA scan findings were divided into 3 categories: single defect, multifocal defects, and discrepant defects. We evaluated the detection rates of vesicoureteral reflux according to DMSA scan lesions. Results: Among a total 320 cases, 141 (44.1%) had abnormal DMSA scans. The infant group (0-1 year of age) had a shorter total fever duration, and a lower C-reactive protein (CRP) value and DMSA positive rate (39.8% vs. 60.6%, P=0.002) compared to children group (2-15 years of age). Patients with abnormal scans had a longer total fever duration and higher CRP compared to those with normal scans. The positivity rate of abnormal scans did not differ between the patients with a short fever duration prior to admission of ${\leq}2$ days and those with longer fever duration of ${\geq}3$ days. However, patients with longer total fever duration had a higher rate of abnormal DMSA scans (P=0.02). Among cases with a single defect, multifocal defects, and discrepant defects, vesicoureteral reflux was observed in 22.4%, 60% and 70.6% of cases, respectively (P=0.004). Conclusion: Although DMSA scan has limitations in early diagnosis, DMSA scan findings may aid in the prediction of the severity of systemic inflammation and detection of vesicoureteral reflux.

• Tribology and Lubricants
• /
• v.30 no.2
• /
• pp.124-129
• /
• 2014

The piping system accounts for a large portion of the machinery structure of a plant, and is considered as a very important mechanical structure for plant safety. Accordingly, it is used in most energy plants in the nuclear, gas, and heavy chemical industries. In particular, the piping system for a nuclear plant is generally complicated and uses the reactor and its cooling system. The piping equipment is exposed to diverse loads such as weight, temperature, pressure, and seismic load from pipes and fluids, and is used to transfer steam, oil, and gas. In ultrasound infrared thermography, which is an active thermography technology, a 15-100 kHz ultrasound wave is applied to the subject, and the resulting heat from the defective parts is measured using a thermography camera. Because this technique can inspect a large area simultaneously and detect defects such as cracks and delamination in real time, it is used to detect defects in the new and renewable energy, car, and aerospace industries, and recently, in piping defect detection. In this study, ultrasound infrared thermography is used to detect information for the diagnosis of nuclear equipment and structures. Test specimens are prepared with piping materials for nuclear plants, and the optimally designed ultrasound horn and ultrasound vibration system is used to determine damages on nuclear plant piping and detect defects. Additionally, the detected images are used to improve the reliability of the surface and internal defect detection for nuclear piping materials, and their field applicability and reliability is verified.