• Title/Summary/Keyword: Defect potential

Search Result 303, Processing Time 0.031 seconds

High Quality Nano Structured Single Gas Barrier Layer by Neutral Beam Assisted Sputtering (NBAS) Process

  • Jang, Yun-Sung;Lee, You-Jong;Hong, Mun-Pyo
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2012.08a
    • /
    • pp.251-252
    • /
    • 2012
  • Recently, the growing interest in organic microelectronic devices including OLEDs has led to an increasing amount of research into their many potential applications in the area of flexible electronic devices based on plastic substrates. However, these organic devices require a gas barrier coating to prevent the permeation of water and oxygen because organic materials are highly susceptible to water and oxygen. In particular, high efficiency OLEDs require an extremely low Water Vapor Transition Rate (WVTR) of $1{\times}10^{-6}g/m^2$/day. The Key factor in high quality inorganic gas barrier formation for achieving the very low WVTR required ($1{\times}10^{-6}g/m^2$/day) is the suppression of defect sites and gas diffusion pathways between grain boundaries. In this study, we developed an $Al_2O_3$ nano-crystal structure single gas barrier layer using a Neutral Beam Assisted Sputtering (NBAS) process. The NBAS system is based on the conventional RF magnetron sputtering and neutral beam source. The neutral beam source consists of an electron cyclotron Resonance (ECR) plasma source and metal reflector. The Ar+ ions in the ECR plasma are accelerated in the plasma sheath between the plasma and reflector, which are then neutralized by Auger neutralization. The neutral beam energies were possible to estimate indirectly through previous experiments and binary collision model. The accelerating potential is the sum of the plasma potential and reflector bias. In previous experiments, while adjusting the reflector bias, changes in the plasma density and the plasma potential were not observed. The neutral beam energy is controlled by the metal reflector bias. The NBAS process can continuously change crystalline structures from an amorphous phase to nano-crystal phase of various grain sizes within a single inorganic thin film. These NBAS process effects can lead to the formation of a nano-crystal structure barrier layer which effectively limits gas diffusion through the pathways between grain boundaries. Our results verify the nano-crystal structure of the NBAS processed $Al_2O_3$ single gas barrier layer through dielectric constant measurement, break down field measurement, and TEM analysis. Finally, the WVTR of $Al_2O_3$ nano-crystal structure single gas barrier layer was measured to be under $5{\times}10^{-6}g/m^2$/day therefore we can confirm that NBAS processed $Al_2O_3$ nano-crystal structure single gas barrier layer is suitable for OLED application.

  • PDF

Development of A-ABR system for identifying difficulty in hearing (난청 감별을 위한 자동청성뇌간반응검사(A-ABR) 측정기 개발)

  • No, Hyung-Wook;Kim, Soo-Chan;Cha, Eun-Jong;Kim, Deok-Won
    • Proceedings of the KIEE Conference
    • /
    • 2008.04a
    • /
    • pp.141-142
    • /
    • 2008
  • Hearing loss is the most common birth defect among infants. Yet most hearing-impaired children are not identified until 1 to 3 years of age - which is well beyond the critical period(6 month) for healthy speech and language development. However, if a hearing-impairment is identified and treated in its early stages, child's speech and language skills will be comparable to his or her normal- hearing peers. For these reasons, hearing screening at birth and routinely throughout childhood is extremely important. Auditory brain-stem response(ABR) is nowadays one of the most reliable diagnostic tools in the early detection of hard of hearing. In this study, we developed the system that detects auditory evoked potential using micro-processor. Furthermore, it is required to develop a portable system to measure in not only soundproof room but also nursery for infants.

  • PDF

Fabrication of Organic-Inorganic Superlattice Films Toward Potential Use For Gas Diffusion Barrier

  • Yun, Gwan-Hyeok;Muduli, Subas Kumar;Seong, Myeong-Mo
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2012.08a
    • /
    • pp.394-394
    • /
    • 2012
  • We fabricated organic-inorganic superlattice films using molecular layer deposition (MLD) and atomic layer deposition (ALD). The MLD is a gas phase process in the vacuum like to atomic layer deposition (ALD) and also relies on a self-terminating surface reaction of organic precursor which results in the formation of a monolayer in each sequence. In the MLD process, 'Alucone' is very famous organic thin film fabricated using MLD. Alucone layers were grown by repeated sequential surface reactions of trimethylaluminum and ethylene glycol at substrate temperature of $80^{\circ}C$. In addition, we developed UV-assisted $Al_2O_3$ with gas diffusion barrier property better than typical $Al_2O_3$. The UV light was very effective to obtain defect-free, high quality $Al_2O_3$ thin film which is determined by water vapor transmission rate (WVTR). Ellipsometry analysis showed a self-limiting surface reaction process and linear growth of each organic, inorganic film. Composition of the organic films was confirmed by infrared (IR) spectroscopy. Ultra-violet (UV) spectroscopy was employed to measure transparency of the organic-inorganic superlattice films. WVTR is calculated by Ca test. Organic-inorganic superlattice films using UV-assisted $Al_2O_3$ and alucone have possible use in gas diffusion barrier for OLED.

  • PDF

Thin Film Encapsulation with Organic-Inorganic Nano Laminate using Molecular Layer Deposition and Atomic Layer Deposition

  • Yun, Gwan-Hyeok;Jo, Bo-Ram;Bang, Ji-Hong;Seong, Myeong-Mo
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2016.02a
    • /
    • pp.270-270
    • /
    • 2016
  • We fabricated an organic-inorganic nano laminated encapsulation layer using molecular layer deposition (MLD) combined with atomic layer deposition (ALD). The $Al_2O_3$ inorganic layers as an effective single encapsulation layer were deposited at 80 degree C using ALD with alternating surface-saturation reactions of TMA and $H_2O$. A self-assembled organic layers (SAOLs) were fabricated at the same temperature using MLD. MLD and ALD deposition process were performed in the same reaction chamber. The prepared SAOL-$Al_2O_3$ organic-inorganic nano laminate films exhibited good mechanical stability and excellent encapsulation property. The measurement of water vapor transmission rate (WVTR) was performed with Ca test. We controlled thickness-ratio of organic and inorganic layer, and specific ratio showed a lowest WVTR value. Also this encapsulation layer contained very few pin-holes or defects which were linked in whole area by defect test. To apply into real OLEDs panels, we controlled a film stress from tensile to compressive and flexibility defined as an elastic modulus with organic-inorganic ratio. It has shown that OLEDs panel encapsulated with nano laminate layer exhibits better properties than single layer encapsulated in acceleration conditions. These results indicate that the organic-inorganic nano laminate thin films have high potential for flexible display applications.

  • PDF

Effect of Printing Conditions on Fluting in Heatset Web Offset Printing (Heatset 윤전 오프셋 인쇄에서 인쇄주름에 대한 인쇄조건의 영향)

  • Jeon, Sung-Jai;Youn, Jong-Tae
    • Journal of Korea Technical Association of The Pulp and Paper Industry
    • /
    • v.41 no.1
    • /
    • pp.52-60
    • /
    • 2009
  • A printing defect known as fluting (or waviness) of the web printed by heatset web offset printing process is one of the chronically serious problems deteriorating print quality. In this paper, fluting occurrence on uncoated papers was explored in terms of many printing conditions including drying temperature, fountain solution amount, ink supply, and press configurations. For this purpose, fluting on prints from real press runs was appraised in a quantitative manner. As results, ink supply was a distinctive factor for fluting such that the lower ink amount, the milder fluting. However increase in fountain solution seemed to make fluting severer while the effect of drying temperature was inconsistent for each paper. This result might indicate variable drying requirements for each paper. Thereby it was suggested that the optimum drying conditions related to the printabilities of each paper need to be established to minimize fluting potential. A press with short dryer and drastic cooling unit produced higher fluting. Suggestions for future work were given along with interpretation for the results.

Design of the Ground Resistance Measuring System using high Performance Filter System (고성능 필터를 이용한 접지저항 측정시스템의 설계)

  • 이기홍;정재기;주형준
    • Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
    • /
    • v.15 no.6
    • /
    • pp.43-48
    • /
    • 2001
  • This paper represents the design of the ground resistance measuring system insensitive to the noise in the earth. Generally, conventional ground resistance measuring instruments may fail to give a precise values for ground resistance under the situations where there is a high ground potential produced by unbalanced power system currents, haromonic currents and noise etc. To make up the defect of conventional ground resistance measuring instruments, in this paper the ground resistance measuring system using high-performance L-C resonant filter and digital signal processor is designed and the insentivity of the designed ground resistance measuring system for noise in the earth is verified by field test on power service and off power service.

  • PDF

Environmental Testing for Precision Parts and Instruments (정밀부품 및 기기에 대한 환경시험기술)

  • Choi, Man-Yong;Park, Jeong-Hak;Yun, Kyu-Tek
    • Journal of the Korean Society for Nondestructive Testing
    • /
    • v.21 no.6
    • /
    • pp.642-649
    • /
    • 2001
  • Precision parts and instruments are tested to evaluate performance in development-process and product-step to prement a potential defect due to a failure design. In this paper, Environmental test technology, which is the basis of reliability analysis, is introduced with examples of test criterion, test method for products, encoder and traffic signal controller, and measuring instruments. Recently, as the importance of the environmental test technology is recognised. It is proposed that tranining of test technician and technology of jig design and failure analysis are very essential.

  • PDF

DENTAL TREATMENT IN A CHILD WITH WISKOTT-ALDRICH SYNDROME : A CASE REPORT (Wiskott-Aldrich syndrome 환아의 치과치료에 관한 임상적 연구)

  • Yang, Cheol-Hee;An, Soo-Hyeon;Rho, Yong-Kwan;Kim, Jae-Gon;Baik, Byeong-Ju
    • Journal of the korean academy of Pediatric Dentistry
    • /
    • v.24 no.1
    • /
    • pp.293-299
    • /
    • 1997
  • Wiskott-Aldrich syndrome is a rare, hereditary disease occurring in males and was first described in 1937. It is characterized by cutaneous eczema, thrombocytopenic purpura and an increased susceptibility to infection due to an immunologic defect. Patients with Wiskott-Aldrich syndrome have a poor antibody response to polysaccharide antigens, low levels of IgM and high levels of IgA and IgE in serum. Oral manifestations of Wiskott-Aldrich syndrome was observed a spontaneous gingival bleeding, palatal petechiae, ulcer and gingival hyperplasia. We report on dental treatment of a 5 years old boy with severe spontaneous gingival bleeding and ulcer suffered from Wiskott-Aldrich syndrome. Prophylactic antibiotics to prevent infection and all potential measures including platelet concentrate therapy to prevent postoperative bleeding should be undertaken. Good oral hygiene should be maintained for prevention of infection by oral normal flora.

  • PDF

Synergistic Inhibition of Membrane ATPase and Cell Growth of Helicobacter pylori by ATPase Inhibitors

  • Ki, Mi-Ran;Yun, Soon-Kyu;Lim, Wang-Jin;Hong, Bum-Shik;Hwang, Se-Young
    • Journal of Microbiology and Biotechnology
    • /
    • v.9 no.4
    • /
    • pp.414-421
    • /
    • 1999
  • Helicobacter pylori were found to be resistant to azide but sensitive to vanadate, suggesting that defect in the P-type ATPase activity rather than F-type ATPase would be lethal to cell survival or growth. To elucidate the relationship between this enzyme inhibition and H. pylori death, we determined the effect of omeprazole (OMP) plus vanadate on enzyme activity and cell growth. The minimum inhibitory concentration (MIC; ca. 0.8$\mu$mol/disk) of vanadate for H. pylori growth was lowered over l0-fold with the aid of OMP, whereby its inhibitory potential toward the P-type ATPase activity was diametrically increased. Alternatively, we found that this enzyme activity was essential for active transport in H. pylori. From these observations, we strongly suggest that the immediate cause of the growth inhibition of H. pylori cells with OMP and/or vanadate might be defective in the cell's active transport due to the lack of P-type ATPase activity. From the spectral data with circular dichroism (CD) spectroscopy, we found that activated OMP (OAS) at concentration below MIC did not disrupt helical structures of membrane proteins. Separately, we determined the cytopathic effect of OAS by SDS-PAGE, indicating the change in the production of cytoplasmic protein but not cell membrane.

  • PDF

Pulmonary Trunk Translocation from LV to RV in Double-Outlet Left Ventricle -A case report- (양대혈관 좌심실기시에서 좌심실에서 우심실로의 폐동맥간 전위술의 치험 -1례 보고-)

  • 김상익;최진호;전태국;박표원
    • Journal of Chest Surgery
    • /
    • v.34 no.11
    • /
    • pp.854-857
    • /
    • 2001
  • Double-outlet left ventricle(DOLV) is a rare congenital cardiac malformation, defined as the origin of both the aorta and the pulmonary artery being entirely or predominantly above the morphologically left ventricle, which is difficult to diagnose accurately. A 3-year old male was admitted for cyanosis and dyspnea. At the age of 2 months, he had undergone pulmonary artery banding and coarctoplasty. He was diagnosed as DOLV with subaortic ventricular septal defect(VSD). Biventricular repair was achieved by patch closure of VSD, primary closure of PFO, and pulmonary trunk translocation from left ventricle to right ventricle. The advantages of this procedure using native tissue for right ventricular outflow tract reconstruction are growth potential and preserved valve function, which contribute to a decreased likelihood of reoperation related to the right ventricular dysfunction related to pulmonary insufficiency.

  • PDF