• 한국콘텐츠학회논문지
• /
• 제9권7호
• /
• pp.110-120
• /
• 2009

최근 소프트웨어 품질평가 및 인종에 대한 인식의 제고와 더붙어 소프트웨어 개발 기업에서 품질투자를 통한 고품질 확보의 중요성에 대한 인식이 증대되고 있다. 그러나 실질적으로 어느 정도 수준에서 품질투자가 이루어져야 하는지, 품질투자를 통해 실질적으로 소프트웨어 품질 개선의 검증이 이루어지지 않음으로 해서 품질투자를 통한 품질개선을 원하는 기업들이 정확한 방향을 설정하지 못하고 있는 문제가 발생 하고 있다. 본 연구에서는 국제표준인 ISO/IEC 9126과 소프트웨어 시험에 관한 지침인 ISO/IEC 12119를 기반으로 메트릭을 구축하였으며 소프트웨어 시험사례를 통해 축적된 결함 데이터를 분석, 결과를 도출하고 미들웨어 소프트웨어의 품질 평가 사례를 조사/분석하여 품질수준과 결함 수준을 분석하고 개발 과정 에서 취약한 부분을 도출하여 대처 방안을 검토하였다. 본 연구를 통해 미들웨어 소프트웨어의 품질향상을 유도하고 양적/질적인 수요를 충족할 수 있다고 본다.

• 대한골관절종양학회지
• /
• 제19권2호
• /
• pp.56-63
• /
• 2013

목적: 골 종양의 수술적 치료 후 발생한 골 결손에 대해 골 대체물의 하나인 탈무기화 골 기질(Demineralized Bone Matrix, Genesis$^{(R)}$)을 이용하여 치료하고 그 결과를 임상적 및 방사선학적으로 분석하여 보고하고자 한다. 대상 및 방법: 2012년 2월부터 2013년 5월까지 골 종양의 수술적 치료 후 발생한 골 결손에 대해 골 대체물의 하나인 탈무기화 골 기질(Demineralized Bone Matrix, Genesis$^{(R)}$)을 이용하여 치료하였다. 총 25예의 양성 골 종양 환자에서 시행하였으며, 남자 15명, 여자 10명이었고, 평균연령은 30.3세였다. 양성 골 종양의 종류별로 보면 고립성 골낭종이 9예, 비경화 섬유종 5예, 섬유성 이형성증 5예, 동맥류상골낭종 3예, 내연골종 3예였다. 부위별로 원위 대퇴골 5예, 근위 경골 4예, 근위 대퇴골 3예, 근위 상완골 3예, 수지골 3예, 원위 요골 2예, 골반골 2예, 종골 2예, 견갑골 1예였다. 자가골을 함께 사용한 경우가 6예, DBM 단독으로 사용한 경우가 19예였다. 추시 기간은 최단 6개월에서 최장 14개월로 평균 8.7개월이었다. 주기적인 추시에서 관찰된 단순 방사선 사진에서 DBM의 이식물의 흡수 정도와 골 생성 정도를 술 후 사진과 비교하여 백분율로 표시하여 관찰하였다. 흡수 정도는 단순 방사선 사진에서 관찰할 수 있는 DBM의 부피의 변화로 측정하였고, 골 생성 정도는 결손부의 골 소주의 생성 정도로 측정하였다. 결과: 총 25예 중 23예에서 골 유합(Bone union)을 관찰 할 수 있었다. 골 유합을 보인 23예는 술 후 평균 4.3개월에 98% 이상의 DBM 흡수율을 관찰할 수 있었고 술 후 평균 6.9개월에는 98% 이상의 골 생성을 관찰 할 수 있었다. 골 결손의 양이 적은 경우 골 형성이 빨랐다(p=0.036). 하지만 그 외 환자의 성별, 나이, 자가골의 첨가 여부 등은 이식물의 흡수율이나 골 생성에 통계학적 유의성은 없었으며, 모든 경우에서 최종 추시 상 특이한 합병증은 없었다. 결론: 양성 골 종양의 수술적 치료 후 발생한 골 결손의 치료제로서 탈무기화 골 기질은 유용할 것으로 생각되나, 장기간의 추시 관찰이 필요할 것으로 사료된다.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제51권7호
• /
• pp.311-315
• /
• 2002

Chemical mechanical polishing (CMP) process was required for the global planarization of inter-metal dielectric(IMD), inter-level dielectric (ILD) layers of multi-layer interconnections. In this paper, we studied the characteristics of polishing pad, which can apply shallow trench isolation (STI)-CMP process for global planarization of multi-level interconnection structure. Also, we investigated the effects of different sets of polishing pad, such as soft and hard pad. As an experimental result, hard pad showed center-fast type, and soft pad showed edge-fast type. Totally, the defect level has shown little difference, however, the counts of scratch was detected less than 2 on JR111 pad. Through the above results, we can select optimum polishing pad, so we can expect the improvements of throughput and device yield.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제45권2호
• /
• pp.78-83
• /
• 2022

There are several subspecies of Bombyx mori, whose silk sericin variants differ. Silk sericin can induce bone morphogenic protein-2 (BMP-2) in macrophages, and silk sericin from different species may have different levels of BMP-2 induction ability. In this study, silk sericin from three B. mori subspecies (Baegokjam, Yeonnokjam, and Goldensilk) was prepared. They were administered to RAW264.7 cells and BMP-2 expression level was studied. Bone regeneration was evaluated using a rat calvarial defect model. BMP-2 expression level was the highest in the Baegokjam group. The bone volume in the Baegokjam group was significantly higher than that in the Yeonnokjam group (P = 0.003). In conclusion, sericin from Baegokjam showed higher levels of BMP-2 expression and bone regeneration than those from Yeonnokjam and Goldensilk.

• Journal of Chest Surgery
• /
• 제24권6호
• /
• pp.590-594
• /
• 1991

We experienced a case of leiomyoma on proximal thoracic esophagus. The patient, a 42-year-old female, noted the insidious onset of dysphagia and chest discomfort for 6 months. Esophagogram showed a smooth filling defect in upper third of thoracic esophagus, T1-T4 level and esophagoscopy revealed a firm mobile mass about 6cm in length with normal overlying mucosa. The lesion was approached the Rt. posterolateral thoracotomy through 4th ICS and enucleated of tumor without difficulty. The patient`s hospital course was uncomplicated.

• Journal of Periodontal and Implant Science
• /
• 제36권1호
• /
• pp.27-37
• /
• 2006

Although the main purpose of periodontal treatment to regenerate is the complete regeneration of periodontal tissue due to periodontal disease, most of the treatment cannot meet such purpose because healing by long epithelial junction. Therefore, diverse materials of resorbable and non-resorbable have been used to regenerate the periodontal tissue. Due to high risk of exposure and necessity of secondary surgical procedure when using non-resorbable membrane, guided tissue regeneration using the resorbable membrane has gain popularity, recently. However, present resorbable membrane has the disadvantage of not having sufficient time to regenerate date to the difference of resorption rate according to surgical site. Meanwhile, other than the structure stability and facile manipulation, acellular dermal matrix has been reported to be a possible scaffold for cellular proliferation due to rapid revascularization and favorable physical properties for cellular attachment and proliferation. The purpose of this study is to estimate the influence of acellular dermal matrix on periodontal ligament, cementum and alveolar bone when acellular dermal matrix is implanted to 1-wall alveolar bone defect. 4 dogs of 12 to 16 month old irrelevant to sex , which below 15Kg of body weight, has been used in this study. ADM has been used for the material of guided tissue regeneration. The 3rd premolar of the lower jaw was extracted bilaterally and awaited for self-healing. subsequently buccal and lingual flap was elevated to form one wall intrabony defect with the depth and width of 4mm on the distal surface of 2nd premolar and the mesial surface of 4th premolar. After the removal of periodontal ligament by root planing. notch was formed on the basal position. Following the root surface treatment, while the control group had the flap sutured without any treatment on surgically induced intrabony defect. Following the root surface treatment, the flap of intrabony defect was sutured with the ADM inserted while the control group sutured without any insertion. The histologic specimen was observed after 4 and 8 weeks of treatment. The control group was partially regenerated by periodontal ligament, new cementum and new alveolar bone. the level of regeneration is not reached on the previous formed notch. but, experimental group was fully regenerated by functionally oriented periodontal ligament fiber. new cementum and new alveolar bone. In conclusion, we think that ADM seems to be used by scaffold for periodontal ligament cells and the matrix is expected to use on guided tissue regeneration.

• Journal of Periodontal and Implant Science
• /
• 제38권2호
• /
• pp.153-162
• /
• 2008

Purpose: Recombining bone morphogenetic protein (BMP) is usually acquiredfrom high level animals. Though this method is effective, its high cost limits its use. The purpose of this study was to evaluate the effect of bone morphogenetic protein-2 with protein transduction domain (BMP-2/PTD;TATBMP-2) on bone regeneration. Rat calvarial defect model and osteoblastic differentiation model using MC3T3 cell were used for the purpose of the study. Materials and Methods: MC3T3 cells were cultured until they reached a confluence stage. The cells were treated with 0, 0.1, 1, 10, 100, 500 ng/ml of BMP-2/PTD for 21 days and at the end of the treatment, osteoblastic differentiation was evaluated usingvon Kossa staining. An 8mm, calvarial, critical-size osteotomy defect was created in each of 48 male Spraque-Dawley rats (weight $250{\sim}300\;g$). Three groups of 16 animals each received either BMP-2/PTD (0.05mg/ml) in a collagen carrier, collagen only, or negative surgical control. And each group was divided into 2 and 8 weeks healing intervals. The groups were evaluated by histologic analysis(8 animals/group/healing intervals) Result: In osteoblastic differentiation evaluation test, a stimulatory effect of BMP-2/PTD was observed in 10ng/ml of BMP-2/PTD with no observation of dose-dependent manner. The BMP-2/PTD group showed enhanced local bone formation in the rat calvarial defect at 2 weeks. New bone was observed at the defect margin and central area of the defect. However, new bone formation was observed only in 50% of animals used for 2weeks. In addition, there was no new bone formation observed at 8 weeks. Conclusion: The results of the present study indicated that BMP-2/PTD(TATBMP-2) have an positive effect on the bone formation in vitro and in vivo. However, further study should be conducted for the reproducibility of the outcomes.

• 한국건설관리학회논문집
• /
• 제18권5호
• /
• pp.59-67
• /
• 2017

공사 완료 시점에는 다양한 마감 공정들이 집중적으로 수행된다. 이는 현장관리자의 업무 부담을 가중시켜 경험에 근거한 임기응변적 품질관리 업무수행을 강제함으로써 감독자나 작업자의 개인역량에 따라 공사품질의 편차가 발생한다. 또한 품질관리와 관련된 정보가 시방서, 도면 등 다양한 유형의 문서에 산재하여 점검사항이 누락되는 경우가 빈번하다. 하자예방과 관련된 정보들을 체계적으로 저장하고, 상호참조 가능한 상태로 연계하여 실무자에게 점검업무 전 또는 수행 중에 효과적으로 제공할 수 있는 도구가 필요하다. 본 논문은 공동주택 마감공사의 품질점검 대상 액티비티 또는 실 단위로 필요한 정보를 체계적으로 저장 검색이 가능한 품질점검 지원 모델을 제안한다. 시방서, 설계기준, 체크리스트, 법규, 하자사례, 도면을 마감공사 프로세스 및 실과 연계하여 하자예방 정보베이스와 정보연계 넥서스를 구축하였으며 이를 바탕으로 정보등록 및 검색 인터페이스를 제시하였다. 내용적으로 다양한 하자예방 정보들을 마감공사 액티비티 및 실을 중심으로 연계하여 활용 가능한 틀을 제시함으로써 일정 수준 이상의 시공품질 확보에 기여할 수 있다.

• Journal of Information Technology Applications and Management
• /
• 제30권5호
• /
• pp.41-57
• /
• 2023

This paper aims to analyse the factors influencing the implementation of smart factories and their performance after implementation, using the grounded theory analysis method based on interview data. The research subjects were 21 companies that were selected by the Smart Manufacturing Innovation Promotion Group under the SME Technology Information Promotion Agency in 2020-2021 as the best case smart factory implementation companies, and introduced the intermediate stage 1 or above. A total of 87 concepts were generated as a result of the analysis. We were able to classify them into 16 detailed categories, and finally derived six broad categories. These six categories are "motivation for adoption", "adoption context", "adoption level", "technology adoption", "usage effect" and "management effect". As a result of the overall structure analysis, it was found that the adoption level of smart factory is determined by the adoption motivation, the IT technology experience affects the adoption level, the adoption level determines the usage and usage satisfaction, internal and external training affects the usage and usage satisfaction, and the performance or results obtained by the usage and usage are reduced defect rate, improved delivery rate and improved productivity. This study was able to derive detailed variables of environmental factors and technical characteristics that affect the adoption of smart factories, and explore the effects on the usage effects and management effects according to the level of adoption. Through this study, it is possible to suggest the direction of adoption according to the characteristics of SMEs that want to adopt smart factories.

• Journal of Chest Surgery
• /
• 제13권3호
• /
• pp.243-249
• /
• 1980

Truncus ateriosus is one of the cyanotic congenital heart disease. The incidence is relatively uncommon, as 0.4% of totoal congenital heart disease. Embryologically the defect is due to a lack of partitioning of the embryonic truncus and conus during the first few weeks of fetal life. The ventricular septal defect is invariable present. A single arterial vessel arises from the heart and supplies blood to the aorta, the lung, and the coronary arteries. In 1949, collett and Edwards classified this defect according to anatomic variation to four major types, such as type I, II, III, and IV. Type IV is defined that pulmonary arteries are absent, and the pulmonary arterial supply arises from the descending thoracic aorta. This patients often have a continuous murmur head particularly well in the interscapular area. No effective surgical treatment is available. We have experienced one case of truncus arteriosus, type IV of Collett and Edwards in the Department of Thoracic and Cardiovascular Surgery, Kyungbook National University Hospital. This patient was 10 year-old girl. The chief complaints were cyanosis and dyspnea on exertion since birth. She was admitted at this hospital on April 16, 1980. The continous machinery murmur was heard loudest at the interscapular area. The chest X-ray films revealed cardiomegaly with an increase in pulmonaryvascular markings. The pulmonary secotr was significantly concave. No filling of pulmonary arteries noticed by the right ventriculogram. There was possible biventricular hypertrophy in EKG. The echocardiogram showed that the demension of the aortic root was larger than normal and minimal increase of the left ventricular internal dimension. The cardiac catheterization data was obtained by use of the great saphenus vein approach. The systolic pressure of the right ventricular outflow tract was 80 mmHg and was similar to that of the aorta. The oxygen saturation data revealed the evidence of the left to right shunt at the level of ventricular septum. The patient was operated and the diagnosis was confirmed as trucus arteriosus, type IV. No effective surgical interventins were performed.