• 생물환경조절학회지
• /
• 제5권2호
• /
• pp.174-186
• /
• 1996

This study was carried out in order to understand the plan, design, constructing and actual condition of management of modernized horticultural facilities in Kyungpook Province which had been constructed from 1992 to 1995 funded by Government support. The aim of this study is to provide reference data for success of the forth project. It was performed by making up a question about driving of project and management condition of equipment after constructing. The results obtained from this study are as follows: 1. 73.5% of facilities horticulture farmhouse recognized that the prospect of greenhouse is bright, but 92.5% of the farmhouse also recognised that they need technical consultation on protected horticulture farming. Therefore, technical educations would must be enhanced about foundation of greenhouse and cultivation technique. 2. The holding times of explanatory meetings, cause of understanding to farmhouse, were one or two times in greenhouse construction, and 62.5% of the farmhouse expressed the insufficiency at the explanation and educational data. For this reason, it was judged that the construction contract had been delayed more than 5 months in 49.3% of the farmhouse after the decision of project budget. 3. In constructing after a contract, the rates of construction delay is 53.4% and defect occurrence is 41.1%. The biggest reasons of construction delay was insufficiency of worker and materials supply. Each percentage is 29.1%. And the reason of defect occurrence is badness of machinery equipment(62.9% ). 4. In management of greenhouse, a pipe-constructed plastic film greenhouse changes plastic film every one and three years because of sticking dust on plastic film. It was needed to about in cleaning technique of coverings. Because that used 3-5 years only half of the expected life span. 5. The order of broken rating in the subsidiary equipment is like this lollop ventilator (42.8%), a general control system(33.3%) especially, in the case of a general control system, the rate of all family can control is 52.7%. so, it is time to develop easy control equipment which every one could use as soon as possible. 6. When choose heat generator as decide capacity, the most priority is the mount of heat generator the percent is 45.5% heat generator and as decide model, the private purchase's percent is 77.3%. It is higher than a public bidding heat generator the percent is 22.7% heat generator when it compare with a public bidding. In the case of $CO_2$ generator, using rate is only 19.0%. The using rate is very low, so it needs education how to use depends on the way of the subsidiary equipment. 7. In the case of seedlings, it is asked to use factory-processed seedling effectively. because it's difficult to get security of labors(58.8%), hoped crops (55.9%) access same crops(29.4%) much more and changing of crops depends on market situation. that is the main reason the lack of knowhow.

• Journal of Nutrition and Health
• /
• 제24권4호
• /
• pp.356-365
• /
• 1991

유전에 의해 비만증을 타고나는 비만쥐 (ob/ob mouse)의 간으로 부터 유리된 세포막과 핵의 $L-triiodothyronine(T_3)$ 결합 능력이 그들과 한 배에서 태어난 정상 체중의 쥐들의 것들과 비교되었다. 세포막이 hypotonic 용액과 discontinuous sucrose density를 사용하여 원심분리기로 분리되었으며, 세포 각 부분의 marker enzyme들의 activity로 세포막의 순도가 측정되었다. 핵은 $Triton{\times}100$를 사용하여 윈심분리기로 얻어졌다. $T_3$ 수용체의 Bmax(최대결합용량)와 Kd(dissociation constant)가 세포막 혹은 핵을 여러 농도의 $^{125}I-T_3$와 함께 일정시간 incubation 시킨 후, 그 binding이 reverse Scatchard analysis에 의하여 계산하여 얻어졌다. 모든 실험과정은 비만쥐와 정상쥐에 대하여 평행으로 진행되었다. 간 핵의 $T_3$ 수용체의 최대결함용량은 비만쥐가 정상 체증의 쥐 보다 유의적으로 적었으나(p<0.001), $T_3$에 대한 친화력에는 차이가 없었다. 이는 이전의 보고들의 결과를 확인해 주는 것이다. 세포막에 있는 $T_3$ 수용체의 최대결합 능력과 친화력은 비만쥐와 정상쥐 간에 유의적인 차이가 없는 것으로 밝혀졌다. 이는 비만쥐의 세포막에 있는 $T_3$수용체의 기능에는 결함이 없음을 나타내며, 비만쥐의 말초조직에서 손상된 갑상선 홀몬의 작용은 세포막 수용체에 결합한 이후에 일어나는 과정에 원인이 있다는 것을 의미하고, 따라서 핵에 있는 $T_3$수용체의 결함이 비만쥐 (ob/ob mouse)의 비만증의 근본적인 원인일 수 있다는 제안을 뒷받침하여 주고 있다.

• Annals of Pediatric Endocrinology and Metabolism
• /
• 제23권4호
• /
• pp.204-209
• /
• 2018

Purpose: Growth hormone transduction defect (GHTD) is characterized by severe short stature, impaired STAT3 (signal transducer and activator of transcription-3) phosphorylation and overexpression of the cytokine inducible SH2 containing protein (CIS) and p21/CIP1/WAF1. To investigate the role of p21/CIP1/WAF1 in the negative regulation of the growth hormone (GH)/GH receptor and Epidermal Growth Factor (EGF)/EGF Receptor pathways in GHTD. Methods: Fibroblast cultures were developed from gingival biopsies of 1 GHTD patient and 1 control. The protein expression and the cellular localization of p21/CIP1/WAF1 was studied by Western immunoblotting and immunofluorescence, respectively: at the basal state and after induction with $200-{\mu}g/L$ human GH (hGH) (GH200), either with or without siRNA CIS (siCIS); at the basal state and after inductions with $200-{\mu}g/L$ hGH (GH200), $1,000-{\mu}g/L$ hGH (GH1000) or 50-ng/mL EGF. Results: After GH200/siCIS, the protein expression and nuclear localization of p21 were reduced in the patient. After successful induction of GH signaling (control, GH200; patient, GH1000), the protein expression and nuclear localization of p21 were reduced. After induction with EGF, p21 translocated to the cytoplasm in the control, whereas in the GHTD patient it remained located in the nucleus. Conclusion: In the GHTD fibroblasts, when CIS is reduced, either after siCIS or after a higher dose of hGH (GH1000), p21's antiproliferative effect (nuclear localization) is also reduced and GH signaling is activated. There also appears to be a positive relationship between the 2 inhibitors of GH signaling, CIS and p21. Finally, in GHTD, p21 seems to participate in the regulation of both the GH and EGF/EGFR pathways, depending upon its cellular location.

• 멤브레인
• /
• 제27권3호
• /
• pp.248-254
• /
• 2017

내염소성 원생동물인 크립토스포리디움, 지아디아 등 병원성 미생물의 제거에 대한 신뢰성을 확보하기 위해 정수처리 공정에서 막여과 시스템이 각광받고 있으며, 이러한 신뢰성을 보증하기 위해 막 완결성에 대한 연구가 중요시되고 있다. 막 완결성 시험은 크게 직접법과 간접법으로 분류되는데, 직접법 중 압력기반의 시험은 버블포인트 이론을 근간으로 병원성 미생물의 최소 크기인 $3{\mu}m$ 크기 이상을 감지할 수 있는 감도로 USEPA Guidance Manual에서 제시하고 있다. 간접법은 온라인 상태에서 연속적인 운전이 가능하다는 점에서 널리 사용되지만, 직접법에 비해 현저히 낮은 막 손상 감지 감도를 가지고 있으며, 손상 부위를 특정 지을 수 없는 한계가 있기에 이러한 감지 감도를 개선해야 할 필요가 있다. 따라서 본 연구에서는 압력 손실 시험에 의한 막 완결성 시험을 통해 막 파단 형태별, 파단 개수, 초기설정압력값에 따른 압력손실률과 LRVDIT 신뢰성 범위를 상호 비교함으로써 막 손상에 따른 감도의 결과를 정량화하여 UCL 기준을 나타내어 비교 평가하였다.

• Tribology and Lubricants
• /
• 제36권2호
• /
• pp.105-115
• /
• 2020

This paper presents a numerical study on the rotordynamic analysis of a dual-spool turbofan engine in the context of blade defect events. The blades of an axial-type aeroengine are typically well aligned during the compressor and turbine stages. However, they are sometimes exposed to damage, partially or entirely, for several operational reasons, such as cracks due to foreign objects, burns from the combustion gas, and corrosion due to oxygen in the air. Herein, we designed a dual-spool rotor using the commercial 3D modeling software CATIA to simulate blade defects in the turbofan engine. We utilized the rotordynamic parameters to create two finite element Euler-Bernoulli beam models connected by means of an inter-rotor bearing. We then applied the unbalanced forces induced by the mass eccentricities of the blades to the following selected scenarios: 1) fully balanced, 2) crack in the low-pressure compressor (LPC) and high pressure compressor (HPC), 3) burn on the high-pressure turbine (HPT) and low pressure compressor, 4) corrosion of the LPC, and 5) corrosion of the HPC. Additionally, we obtained the transient and steady-state responses of the overall rotor nodes using the Runge-Kutta numerical integration method, and employed model reduction techniques such as component mode synthesis to enhance the computational efficiency of the process. The simulation results indicate that the high-vibration status of the rotor commences beyond 10,000 rpm, which is identified as the first critical speed of the lower speed rotor. Moreover, we monitored the unbalanced stages near the inter-rotor bearing, which prominently influences the overall rotordynamic status, and the corrosion of the HPC to prevent further instability. The high-speed range operation (>13,000 rpm) coupled with HPC/HPT blade defects possibly presents a rotor-case contact problem that can lead to catastrophic failure.

• Archives of Plastic Surgery
• /
• 제38권4호
• /
• pp.359-368
• /
• 2011

Purpose: Aquacel Ag$^{(R)}$ is a hydrofiber wound dressing integrated with ionic silver. Sorbact$^{(R)}$ is a hydrophobiccoated dressing that uses the hydrophobic interaction with microbes. In this study, we compared the wound healing effects and the antibacterial effects of Medifoam$^{(R)}$, Betadine soaked, Aquacel Ag$^{(R)}$ and Sorbact$^{(R)}$ dressings against MRSA-infected wounds. Methods: Eighty rats were divided into four groups: Medifoam$^{(R)}$; Betadine soaked; Aquacel Ag$^{(R)}$; and Sorbact$^{(R)}$. A $1.5{\times}1.5cm$ square full-thickness wound was made on the dorsum of each rat and infected with MRSA. Twenty-four hours thereafter, each dressing was applied to the wound and changed every other day. One, 3, 7, 11 and 15 days after the wound infection, swab culture grade, wound bed appearance score, and wound defect size change were evaluated, and 7 and 15 days after, histologic evaluation was compared between the groups. Results: The bacteria load of wounds in the Sorbact$^{(R)}$ group decreased earlier than in the other groups. The wound bed appearance score of the Sorbact$^{(R)}$ group also increased quicker, compared with the other groups. However, the size of wounds of the Aquacel Ag$^{(R)}$ group decreased more rapidly, compared with other groups. From the histologic point of view, there was no significant difference between Betadine soaked, Aquacel Ag$^{(R)}$ and Sorbact groups. Conclusion: The hydrophobic dressing using Sorbact$^{(R)}$ showed a more rapid reduction in the MRSA load and an elevation in the wound bed appearance score, but a slower decrease in wound size change due to detachment of wound bed tissue when the dressing was eliminated in the low exudate wound. The silver-containing hydrofiber dressing using Aquacel Ag$^{(R)}$ was more effective in ultimate wound size reduction, but some debris was trapped in the wound tissue and induced foreign body reaction in the high exudate wound. Thus, ongoing selection process of treatment based on the evaluation of the infectious wound state will be very important.

• 한국터널지하공간학회 논문집
• /
• 제24권1호
• /
• pp.109-128
• /
• 2022

시설물안전법에 의한 터널의 정밀안전진단은 세부지침에 의거하여 수행되나, 현재의 TBM터널 세그먼트라이닝 평가체계에는 유압잭 사용의 장비특성, 세그먼트를 고려한 외관조사, 건전도를 위한 비파괴 시험방법 등의 결함특성을 반영하지 못하는 한계를 지닌다. 시설물정보관리시스템에 등재된 TBM터널은 1% 미만이지만 다중이용시설 및 국가 중요시설의 사용을 감안하여 많은 유지관리가 필요하다. 발파로 굴착하며 터널 축을 따라 6~12 m의 라이닝을 연속하여 현장 타설하는 NATM터널과 비교하여 TBM터널은 디스크커터와 커터비트가 달린 원형의 회전판을 회전하여 굴진하며 공장 제작된 폭 1.2~1.4 m 세그먼트를 조립하여 구조체를 형성한다. TBM터널에 대한 정확한 평가를 위해서는 설계, 시공, 운용단계의 특징이 고려되어야 한다. 11개 구간에서 운용중인 국내 지하철 TBM터널의 결함특성을 유형별로 분석하였으며 TBM터널 세그먼트라이닝의 공통된 결함 특성 이외에 특수한 결함에 대해서는 해외 논문 연구내용을 발췌하여 이해를 돕고자 하였다. 균열과 누수는 위치 및 형상에 따라 7가지 유형으로 구분하였으며, 박락 및 파손과 부식에 대해서는 3가지 유형으로 구분하여 분석하였다. 향후 설계, 시공의 피드백과 유지관리에 도움이 되고자 한다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.299-299
• /
• 2016

SiC는 넓은 에너지갭 (Eg=~3.4 eV)을 갖는 반도체로써, 고전압, 고온에서 동작이 가능하여 기존의 Si기반의 파워디바이스를 대체하기 위한 물질로 많은 연구가 이루어지고 있다. 파워 디바이스의 성능 향상을 위해서는 기판과 절연체 사이의 계면에 생성되는 계면 결함을 감소시켜야 한다. 따라서 본 연구에서는 SiC 기판에 high-k 물질인 HfO2를 증착하여 HfO2/SiC 계면에 유도된 결함을 분석하고 이를 감소시킬 수 있는 방법에 대한 연구를 수행하였다. HfO2 박막은 atomic-layer-deposition (ALD) 방법을 이용하여 SiC 기판 위에 $200^{\circ}C$에서 증착하였다. HfO2 박막 증착 후 NH3 분위기에서 rapid thermal annealing 방법을 이용하여 $600^{\circ}C$에서 1분 동안 열처리 진행하였다. Current-voltage (I-V) 측정을 통해 열처리 전 HfO2/SiC의 절연파괴 전압이 약 8.3 V 임을 확인하였다. NH3 열처리 후 HfO2/SiC의 절연파괴 전압이 10 V로 증가하였으며 누설 전류가 크게 감소하는 것을 확인하였다. 또한 capacitance-voltage (C-V) 측정을 통해 열처리 후 flat band voltage가 negative 방향에서 positive 방향으로 이동함을 확인하였고, 이를 통해 NH3 열처리 방법이 HfO2/SiC 계면에 존재하는 결함을 감소시킬 수 있음을 확인하였다. 전자 구조상의 conduction band edge에 존재하는 결함 준위를 분석하기 위해 x-ray absorption spectroscopy (XAS) 분석을 실시하였고, 열처리 전 HfO2/SiC 계면에 많은 결함 준위가 존재함을 확인하였으며, x-ray photoelectron spectroscopy (XPS) 분석을 통해 이 결함 준위가 oxygen deficiency state과 관련됨을 알 수 있었다. NH3 열처리 후 결과와 비교해보면, oxygen deficiency state가 감소함을 확인하였으며 이로 인해 conduction band edge에 존재하는 결함 준위가 감소함을 알 수 있었다. 따라서, NH3 열처리 방법을 이용하여 HfO2/SiC 계면에 존재하는 결함을 감소시킬 수 있으며, HfO2/SiC의 물리적, 전기적 특성을 향상시킬 수 있다는 결과를 도출하였다.

• 의료법학
• /
• 제9권1호
• /
• pp.413-459
• /
• 2008

The Law has intervened to define rare circumstances in which a person should choose continuing life in United States. On the one hand, the law has traditionally acted to preservelife and to respect the sanctity of life. On the other hand, one's control over one's own body, and the right to determine what kind of medical care one will receive, is equally well respected and historically grounded. The competent patients have the right to forgo life-sustaining treatment, courts in United States have left many unanswered questions about the nature of that right. The right to choose to forgo life-sustaining treatment is a manifestation of a patient's autonomy interest. In United States, The Karen Quilan case gave rise to legislative activity in the host of state capitals, and several states had adopted statutes that formally recognized some forms of written directives describing some circumstances in which certain kinds of medical care could be terminated. These statues were sometimes dominated 'living will' acts, sometimes 'right to die' acts and ocasionally 'natural death' acts. Today virtually every state has produced a living will statue. In Korea, courts do not permit a terminally ill person to withhold or withdraw life-sustaining treatment. Living wills apply in case of terminal illness owing to a defect in legislation. Now In Korea, these lively dispute of legal policy on the preconditions and concrete procedure of living will act and natural death act. Through the legislation of living will act and natural death act, we should prepare some circumstances to respect patient's autonomy on the right to die. We should frame the cultural standard to make a decision of forgoing life-sustainin1g treatment under the discreet procedure.

• Tribology and Lubricants
• /
• 제34권4호
• /
• pp.146-159
• /
• 2018

This paper presents a wear analysis procedure for calculating the wear of journal bearings of a four-strokes and four-cylinder engine operating at a constant angular crank shaft speed during firing conditions. To decide whether the lubrication state of a journal bearing is in the possible region of wear scar, we utilize the concept of the centerline average surface roughness to define the most oil film thickness scarring wear (MOFTSW) on two rough surfaces. The wear volume is calculated from the wear depth and wear angle, determined by the magnitude of each film thickness on a set of oil films with thicknesses lower than the MOFTSW at every crank angle. To calculate the wear volume at one contact, the wear range ratio during one cycle is used. The total wear volume is then determined by accumulating the wear volume at every contact. The fractional film defect coefficient, asperity load sharing factor, and modified specific wear rate for the application of the mixed-elasto-hydrodynamic lubrication regime are used. The results of this study show that wear occurs only at the connecting-rod big-end bearing. Thus, simulation results of only the big-end bearing are illustrated and analyzed. It is shown that the wear volume of each wear scar group occurs consecutively as the crank angle changes, resulting in the total accumulated wear volume.