• Imaging Science in Dentistry
• /
• v.54 no.2
• /
• pp.171-180
• /
• 2024

Purpose: This study was conducted to identify the typical sites and patterns of peri-implant bone defects on cone-beam computed tomography (CBCT) images, as well as to evaluate the detectability of the identified bone defects on panoramic images. Materials and Methods: The study population included 114 patients with a total of 367 implant fixtures. CBCT images were used to assess the presence or absence of bone defects around each implant fixture at the mesial, distal, buccal, and lingual sites. Based on the number of defect sites, the presentations of the peri-implant bone defects were categorized into 3 patterns: 1 site, 2 or 3 sites, and circumferential bone defects. Two observers independently evaluated the presence or absence of bone defects on panoramic images. The bone defect detection rate on these images was evaluated using receiver operating characteristic analysis. Results: Of the 367 implants studied, 167 (45.5%) had at least 1 site with a confirmed bone defect. The most common type of defect was circumferential, affecting 107 of the 167 implants(64.1%). Implants were most frequently placed in the mandibular molar region. The prevalence of bone defects was greatest in the maxillary premolar and mandibular molar regions. The highest kappa value was associated with the mandibular premolar region. Conclusion: The typical bone defect pattern observed was a circumferential defect surrounding the implant. The detection rate was generally higher in the molar region than in the anterior region. However, the capacity to detect partial bone defects using panoramic imaging was determined to be poor.

• Korean Journal of Construction Engineering and Management
• /
• v.20 no.5
• /
• pp.104-114
• /
• 2019

This study explored to analyze the winning determinants of the lawsuit cases on the urban and housing redevelopment project based on jurimetric methods. Based on affirm-rate and staircase matrix tables, 441 lawsuit judgments are analyzed. Research findings in affirm-rate analysis indicate that past legal relation, no own defect of accreditation, no ownership or association member status, lapse of period of litigation, and no legal interest are identified as higher rate in order for the reason for plea on the merit. And so are defect on calculation of consent rate, defect in relation with written consent, approval before zoning designation, defect in relation with general meeting, and defect on zoning designation for the issue on the merit. It is noteworthy from the staircase matrix table analysis that the criteria for affecting the lawsuit outcome is determined based on key forecasting variables such as past legal relation and no ownership or association member status. This study intends to provide the implication that the unnecessary disputes can be reduced in the urban and housing redevelopment project by the implementation of jurimetric quantitative analysis methodology from the perspective of empirical law.

• Journal of the Korean Institute of Plant Engineering
• /
• v.23 no.4
• /
• pp.29-38
• /
• 2018

Through process quality information, the time required for process quality analysis has been drastically shortened, the process defect rate has been reduced, and the manufacturing lead time has been shortened and the on-time delivery rate has been improved. Therefore, The purpose of this study is to develop a quality information analysis system model that effectively shortens the time required for process quality analysis in automobile safety belt parts manufacturing process. As a result of experiments on communication operation between manufacturing execution system (MES) quality server, injection machine control computer, injection machine programmable logic controller (PLC) and terminal, in analyzing quality information, the conventional handwriting input method took an average of 20 minutes, but the new multi-network method took about 2 minutes on average. In addition, the process defect rate was reduced by 13% and the manufacturing lead time was shortened from 28 hours to 20 hours. The delivery compliance rate improved from 96 to 99%.

• Journal of the Korea Society of Computer and Information
• /
• v.23 no.2
• /
• pp.9-16
• /
• 2018

Recently, as various IP set-top boxes based on Android OS have been widely used in general households and public facilities, complaints about services and set-top boxes have continued to increase as much as other smart devices. In order to reduce this problem, the manufacturer performs the testing work before the product is commercialized. However, the testing can reduce potential defects in the product, but it can not prove that the product is free of defects. Therefore, the quality of the product can vary depending on how effective testing techniques are introduced. In this paper, we propose a new exploratory testing method that minimizes test case creation time and makes it easier to plan and execute test while simultaneously learning how to run the product under test. Using the first proposed method, the test time is reduced by about 16.7 hours and the defect detection rate is 25.4% higher than the formal specification-based testing method. Informally, the test time was shortened by about 4.7 hours and the defect detection rate was 13% higher than the informal experience-based testing method.

• Journal of Information Processing Systems
• /
• v.16 no.5
• /
• pp.1008-1014
• /
• 2020

Aiming at the defect detection quality of denim fabric, this paper designs an improved algorithm based on the optimized Gabor filter. Firstly, we propose an improved defect detection algorithm of jean fabric based on the maximum two-dimensional image entropy and the loss evaluation function. Secondly, 24 Gabor filter banks with 4 scales and 6 directions are created and the optimal filter is selected from the filter banks by the one-dimensional image entropy algorithm and the two-dimensional image entropy algorithm respectively. Thirdly, these two optimized Gabor filters are compared to realize the common defect detection of denim fabric, such as normal texture, miss of weft, hole and oil stain. The results show that the improved algorithm has better detection effect on common defects of denim fabrics and the average detection rate is more than 91.25%.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.11a
• /
• pp.187-188
• /
• 2019

The supply of apartments has continuously increased, and the housing supply rate has exceeded 100 percent and the demands and standards of tenants have also been raised as technology has developed. This has led to the conflict and caused social and economic losses. In this study, the case investigation and research methods of the prior research are analyzed as the basis for identifying the defects cases of causes and influences occurring in the apartment building. To analyze various studies, we divided the prior research into the defect management process and the study on the type of defects and countermeasures, and investigated the features and limitations. Future research will be conducted on apartment buildings within 10 years of completion among conglomerate's nationwide apartments to compensate for the limitations of prior research. In addition, AHP static method and relational chart will be used to identify the relationship between the type of defect and the cause and the importance of the influencing factors.

• Proceedings of the IEEK Conference
• /
• 2009.05a
• /
• pp.163-165
• /
• 2009

Automatic Vision Inspection(AVI) systems automatically detect defect features and measure their sizes via camera vision. It is important to predict the performance of an AVI to meet customer's specification in advance. In this paper, we propose a statistical method for prediction of false alarm rate regarding inconsistency of defect size measuremet process. We only need are a simple experimental trial for repeated defect size measurement test. The statistical features from the experiement are utilized in the prediction process. Therefore, the proposed method is swift and easy to implement and use. The experiment shows a close prediction compared to manual inspection results.

• Journal of the Korean Society of Safety
• /
• v.21 no.6 s.78
• /
• pp.64-73
• /
• 2006

Due to the lack of available land for housing in Korea, apartment has been supplied in great quantities to raise the rate for land-use since the middle of 1980s. Many people in Korea live in apartment because the number of apartment occupies more than half of total houses. Nevertheless, the concern on the house management with respect to the quality is insufficient, it is currently required the concern on the quality of housing. Moreover, many defects in apartment has been occurred repeatedly now, so, it is necessary to analyze the defect in order to raise the quality of living environment. This study aimed to survey the types of defect in apartment according to the construction types through the questionnaire analysis about apartment residents in Gwangju city for the purpose of reducing the defects.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.9
• /
• pp.906-908
• /
• 2009

AVI (Automatic Vision Inspection) systems automatically detect defect features and measure their sizes via camera vision. It is important to predict the performance of an AVI to meet customer's specification in advance. Also the prediction can indicate the level of current performance of an AVI system. In this paper, we propose a statistical method for prediction of false alarm rate regarding inconsistency of defect size measurement process. For this purpose, only simple experiments are needed to measure the defect sizes for certain number of times. The statistical features from the experiment are utilized in the prediction process. Therefore, the proposed method is swift and easy to implement and use. The experiment shows a close prediction compared to manual inspection results.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.39
• /
• pp.5.1-5.9
• /
• 2017

Many congenital and acquired defects occur in the maxillofacial area. The buccal fat pad flap (BFP) is a simple and reliable flap for the treatment of many of these defects because of its rich blood supply and location, which is close to the location of various intraoral defects. In this article, we have reviewed BFP and the associated anatomical background, surgical techniques, and clinical applications. The surgical procedure is simple and has shown a high success rate in various clinical applications (approximately 90%), including the closure of oroantral fistula, correction of congenital defect, treatment of jaw bone necrosis, and reconstruction of tumor defects. The control of etiologic factors, size of defect, anatomical location of defect, and general condition of patient could influence the prognosis after grafting. In conclusion, BFP is a reliable flap that can be applied to various clinical situations.