During the casting process, it is possible to minimize shrinkage and blowholes by modifying the casting design. However, it is impossible to eliminate these factors completely. Therefore, mechanical design engineers apply a sufficient safety factor owing to the possibility of insufficient performances of the cast products. In this paper, prediction method of the fatigue life of cast products containing shrinkage is conducted by using CT (computed tomography) and the SSM (shape simplification method), and additional fatigue analyses are carried out. The analysis results are then compared to results from actual experiments on samples with shrinkage defects. It is found to be that the considering actual shrinkage in cast products by means of stress and fatigue analyses is more accurate and effective. It is also considered that the proposed hot spot method provides us a good tool to predict the fatigue lifes of cast product.
Medical leech therapy is a treatment for the venous congestion of tissue flaps, grafts, and replants. We report a case of methicillin-resistant Staphylococcus aureus (MRSA) following leech application at a congested flap after mastectomy. A 45-year-old woman had an invasive ductal carcinoma. Modified radical mastectomy was performed. The chest wall defect was reconstructed with a local rotation flap. On postoperative day (POD) 1, congestion and color change were observed, and 10 medical leeches were applied to the congested area. On POD 4, another 10 medical leeches were applied. On POD 12, wound necrosis progressed and a pus-like discharge appeared. A wound swab culture revealed MRSA. Debridement was carried out on POD 15. From POD 16, vancomycin and piperacillin/tazobactam were injected for 18 days. The wound culture on POD 18 also revealed MRSA. A split-thickness skin graft was performed on POD 28. MRSA has not been clearly identified in the literature as a leech enteric bacterium. Although MRSA may have come from another source, the present case raises the possibility of MRSA infections following leech application at congested flaps. When medical leeches are applied at the congestion site of a flap, an aseptic cradle will be helpful. Vancomycin irrigation may be needed if infection occurs.
Hydraulic units are important components of agricultural and construction machinery, and thus require high-quality castings. However, gas defects occurring inside the sand cores of the castings due to the resin used is a problem. This study therefore aimed to develop a casting simulation method that can clarify the gas defect positions. Gas defects are thought to be caused by gas generated after the molten metal fills up the mold cavity. The gas constant is the most effective factor for simulating this gas generated from sand cores. It is calculated by gas generating temperature and analysis of composition in the inert gas atmosphere modified according to the mold filling conditions of molten metal. It is assumed that gases generated from the inside of castings remain if the following formula is established. [Time of occurrence of gas generation] + [Time of occurrence of gas floating] > [Time of occurrence of casting surface solidification] The possibility of gas defects is evaluated by the time of occurrence of gas generation and gas floating calculated using the gas constant. The residual position of generated gases is decided by the closed loops indicating the final solidification location in the casting simulation. The above procedure enables us to suggest suitable casting designs with zero gas defects, without the need to repeat casting tests.
As the variability of recent rainfall is increasing, it is becoming important to recognize the possibility of changes in the current reservoir state in advance and to inspect the stability based on accurate evaluation standards. However, the evaluation standards for the state change factors of reservoirs are still not suitable for agricultural reservoirs and thus much improvement is needed. Therefore, in this study, the evaluation criteria for state change factors specialized for small reservoirs were categorized and standards were prepared by considering factors that may cause state changes on the dam crest, upstream slope, and downstream slope of the embankment. The categorized results were configured based on the number of mentions of the precision safety inspection report on major defects in 102 reservoirs and the defect factors found in field investigations. The findings of the study indicated that the current state change standards require many revisions for excessive or unnecessary state change factors in the reservoir. Specifically, the deletion of measurement gauges not applicable to the reservoir, the addition of defects found in the reservoir, and the scope of use of the term were proposed. The results of this study can contribute to efficient system operation and management by improving the deficiencies in the system and introducing a new state change factor.
대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
/
pp.70-75
/
2002
The penetration potential of TIG welding in one single run is limited, though the process itself generates high quality welds with good weld cosmetics. This is one of the main reasons, which has contributed to its development in high duty applications such as those encountered in aeronautical, aerospace, nuclear & power plant applications. For these applications, stainless steels, titanium k nickel based alloys are most often used. As these materials remain very sensible to weld heat input k atmospheric pollution, stringent processing conditions are imposed. For example welding of titanium alloys requires argon shielding of weld zone and for 5 mm thick plates multi-pass runs & filler additions are required. This multi-run operation not only raises the welding cost, but also increases defect risks. In recent years, extensive interest has been raised by the possibility to increase weld penetrations through flux applications & the process is designated ATIG-activated TIG, or FBTIG-flux bounded TIG. The improved welding performance of such flux assisted TIG is related to arc constriction and surface tension effects on weld pool. The research work by authors has lead to the formulation of welding fluxes for stainless steels k titanium alloys with TIG Process. These fluxes are now commercialized & some applications in industry have already been carried out. FBTIG for aluminum has been proposed with silica application for AC mode TIG welding. The paper highlights the fundamentals of flux role in TIG welding and illustrates some industrial applications.
The process design of backward and forward extrusion of axisymmetric part has been studied in this paper. The important factors of cold forging process with complex geometry are the design of initial billet shape, the possibility of forming by one-stage operation and the determination of preform shapes, etc. Based on the systematic procedure of process sequence design, the forming operation of cold forged part is analyzed by the commercial finite element program, DEFORM. The design criteria are forming load, geo- metrical filling without defect and a sound distribution of effective strain in final product. It is noted that one step of preform operation is required to obtain the final product. Numerical result is compared with experi- mental one. It is found that the analyzed result is in good agreement with actual forming result.
근래에 기도 협착의 발생빈도는 수술요법의 괄목할만한 진전과 Low pressure cuff가 개발된 후 현저히 감소하고 있으나 호흡부전으로 Ventilator를 사용하는 경우와 심한 상기도 감염이나 손상이 있을 때 또는 장기간 삽관을 함으로서 발생하는 기관 협착증은 아직도 이비인후과 영역에 있어서 난제라고 하겠다. 이러한 기도 협착증의 치료로는 기계적으로 확장을 하거나 협착 부위를 수술적으로 제거하고 조직을 이식하는 여러 방법들이 있어서 그적응증에 따라 각각 사용되어 오고 있으나 아직까지도 만족할만한 결과를 얻지 못하는 때가 많은 실정이다. 1959년 Lester가 우연히 늑골의 잔존 연골피막으로부터 신생 연골이 재생된 것을 발견한 이후 Skoog(1972), Sohn(1974), Ohlsen(1975)등은 동물 실험을 통하여 연골 피막으로 부터의 연골 재생에 관하여 다각적인 보고를 하였다. 임상적으로 이개, 비중격, 늑골 및 피부편등 여러 가지 다양한 조직들이 기관의 결손 또는 협착 부위의 재생에 사용되어 왔으나 기관의 정상적인 지지 조직의 연골이며 또한 연골피막이 연골의 재생을 가능케 한다는 점에 입각하여 기관의 재건에 연골피막의 사용가능성을 알아 보고저 다음의 실험을 하였다, 가토의 이개연골에서 연골피막을 취한후 인위적으로 만든 가토의 기관 결손부위에 이식한 다음 2주부터 8주경과 할때 까지의 재생 변화를 관찰하여 다음과 같은 결론을 얻었다. (결론) 1) 기관결손 부위의 재생은 대조군에서는 결손부위에 섬유질 및 혈관으로 구성되었으나 이식군에서는 비후된 연골피막과 섬유질로 구성되었다. 2) 점막의 재생은 대조군과 이식한군 모두에서 2주경과 표본부터 정상점막으로 완전히 재생 되었다. 3) 이식 부위의 변화를 보면 2주-모세혈관의 확장과 염증반응을 동반하며 섬유조직의 증식시작이 관찰되었다. 4주-점차 모세혈관의 확장이 감소하며 염증반응의 감소가 있으며 점막하층의 섬유조직의 증식이 있고 1개의 표본에서 연골피막내에 미숙연골 세포군이 존재. 6주-경도의 모세혈관의 확장과 만성염증반응이 존재하며 점막하층의 섬유조직화가 존재하였으며 2개의 표본에서 연골피막내에 연골 세포군 및 골화현상이 존재하였다. 8주-경미한 모세혈관의 확장이 존재하였으나 염증반응은 소실되었고 점막하층에 심한 섬유화를 동반하였다. 표본 2개에서 연골 피막내에 연골 세포군의 존재가 관찰되었다. 4 ) 이식방법을 달리한 경우에도 연골 및 점막의 재생에는 유의한 차이를 발견할 수 없었다. 5) 연골피막 이식부위에서 미숙연골 세포군과 endo-chondrial ossification을 관찰할 수 있었으나 대조군에서는 결손부위의 섬유화만이 관찰되었다. 이상의 결과로 볼때 연골피막은 기관결손부위의 재진에 적합한 조직이라할 수 있었다. 그러나 40 례의 표본중 5례의 표본에서만 연골의 세포군을 관찰할 수 있어 이로 미루어 볼때 연골피막으로 부터 신생 연골이 재생된다 확인하기는 불충분하다고 생각되며 앞으로의 추시가 요망된다 하겠다.
Journal of the Korean Association of Oral and Maxillofacial Surgeons
/
제36권5호
/
pp.380-385
/
2010
Introduction: The iliac crest has been the accepted place to obtain bone for reconstruction in oral and maxillofacial surgery. The iliac crest has many advantages because of its accessibility, large amount of cancellous bone, relative ease of bone harvest, possibility of two team approach and ability to close the wound primarily. This study evaluated retrospectively the morbidity of bone harvesting from the anterior iliac crest to provide a logical guide for recognizing the complications and morbidities of an iliac crest bone graft. Materials and Methods: Fifty healthy patients (mean age of 35.5 years; range 7 to 59) underwent iliac crest bone harvesting for a maxillofacial reconstruction from January 2007 to September 2009 at the Department of Oral and Maxillofacial Surgery in Kyungpook National University Hospital. Age, sex, size and kind of grafted bone, duration of pain on donor site, duration of gait disturbance, sensory deficit, scar, contour defect were measured in each patients by retrospective research. Results: The mean duration of pain is 6.7 days, and mean duration of gait disturbance is 7.2 days. Most patients were free from gait disturbances and pain within 2 weeks and there was no correlation between the size of the harvesting block bone and the duration of gait disturbance or pain. However, this study showed that the duration of pain is associated with gait disturbance. In addition, most patients had no complaints regarding their surgical scar and contour defect, and only one patient had permanent impairment of the sensory function. Moreover, an iliac bone graft did not extend the length of hospitalization. Conclusion: This study suggests that split thickness bone harvesting from the inner table of the anterior iliac crest is a well accepted procedure with relatively low morbidity.
Journal of the Korean Association of Oral and Maxillofacial Surgeons
/
제35권1호
/
pp.13-20
/
2009
Background In contrast to defects of the mandible and mouth floor region, in the defect of maxilla, the availability of firmly attached oral and nasal mucosal linings is needed. In addition to it, in consider of operation field, operating convenience, and esthetics, reconstruction using prelaminated flap is strongly recommended. Therefore we consider the prelaminated flap through the cases that is reconstructed using prelaminated forearm flap and prelaminated scapular flap. Patients and Methods From 2001 to 2008, in OMFS SNUDH, there were 6 cases that had reconstruction using prelaminated forearm free flap and other 3 cases that had reconstruction using prelaminated scapular flap of maxilla. The average age of patients that were reconstructed using prelaminated forearm free flap was 47.5 years, the average prelaminated period (after $1^{st}$ operation ${\sim}$ until $2^{nd}$ operation) was 51.8 days and the average follow-up period after $2^{nd}$ operation was 35.3 months. As well, the average age of patients that were reconstructed using prelaminated scapular free flap was 37 years, the average prelaminated period (after $1^{st}$ operation ${\sim}$ until $2^{nd}$ operation) was 57 days and the average follow-up period after $2^{nd}$ operation was 42.3 months. Results Except 1 case that were reconstructed using prelaminated scapular flap, we could get firmly attached oral and nasal stable skin(mucosal like) lining, more adequate thickness flap than any other flap and improved esthetic and functional results in the other 8 cases that were reconstructed using prelaminated flap. The complications of the prelaminated forearm flap cases were inconvenient swallowing, sputum, limitation of mouth opening and difficult mastication. It came from flap shrinkage of the flap in some aspect, as well as other combined operations such as mass resection or RND. The difficult point of the reconstruction of prelaminated scapular flap was the possibility of vascular damage at preparation of flap in $2^{nd}$ surgery. The damage could cause the failure of the prelaminated scapular flap. And the skin-lining of the prelaminated flap had limitations, so it is needed to study about the cultured oral epithelium-lining flap instead of the skin-lining flap. Conclusion We considered about advantages, complications and notable things of prelaminated flap through maxillary reconstruction cases using prelaminated forearm flap and prelaminated scapular flap so far. Furthermore, we should go on studying for functional reconstruction of prelaminated fasciomucosal flap using cultured oral epithelium.
This study was undertaken to investigate possibility of the allogenic type I collagen inducing osteoinduction or osteoconduction at critical sized bone defect in the rabbit. Twenty Newzealand white rabbit, weighted from 2.8 kg to 3.5 kg, were used in this study. The skull was exposed and two bony defects were created with diameter of 10 mm. Group I(n=10), the bony defects was grafted from the other side bone. Group II(n=10), the bony defects was grafted by the allogenic type I collagen with bone morphogenic protein(BMP). Group III(n=10), the bony defects was grafted by the allogenic type I collagen only. Group IV(n=10), the bony defects was lefted with no grafts. The grafted bones and allogenic type I collagen were investigated with radiologic densitometry, histologic analysis and immunohistochemistry after 12 weeks. No major difference was observed in the gross finding between Group I, II, III, but dura mater was exposed in bony defect,the Group IV. The radiologic study demonstrated more bony opacity in the Group I, but the other groups did not demonstrate a significant difference. In the histologic study, grafted bone edge was completely consolidated with original bone in group I and new bone ingrew into the grafted allogenic type I collagen(group II, III),but there is no bone regeneration from the original bony edge in the group IV. The percent of the new bone formation by cross-sectional area was considered statistically significant at a p value of less than 0.05(p<0.05). In the immunohistochemistry study about BMP antibodies, the group IV demonstrated osteogenic activity in front of advancing original bone edge, in which the osteoblast stained strongly for BMP antibodies, but other group does not demonstrated any osteoblastic expression. There was no immunologic rejection. In conclusion, this results do not demonstrate that the allogenic type I collagen is useful for bone substitute, but the characters of the collagen, such as pliability, easy-handling, sponge-like structure, are useful in interpositional bone graft substitutes. The further evaluation of long term results about the resorption, immunologic tissue reaction, response of applied tissue growth factor to the allogenic collagen is needed.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.