• 대한족부족관절학회지
• /
• 제18권2호
• /
• pp.76-79
• /
• 2014

In treatment of failure in ankle joint replacement therapy, talar avascular necrosis with massive bone defect, talus fracture with severe comminution and bone defect and ankle dislocation, treatment of large bone defects is considerably important for ankle joint stability and union, therefore, the choice of treatment for large bone defects is use of femoral head or iliac crest bone graft and rigid internal fixation. Because first generation total ankle arthroplasty performed for the first time using a cemented fixation technique requires a large amount of bone resection during re-surgery and there is some possibility of a larger bone defect after removal of implants, in cases where prosthesis for the defect is needed, performance of palliative femoral head or iliac crest bone graft and rigid internal fixation can be difficult. We report on a case of a 48-year-old woman who had experienced ankle pain for 25 years since undergoing total ankle arthroplasty. Because the patient had little ankle motion and rigid soft tissue despite a large bone defect caused by aseptic loosening, a good outcome was obtained only for the femoral cancellous bone graft using allo femoral head without internal fixation.

• 한국산학기술학회논문지
• /
• 제19권1호
• /
• pp.596-602
• /
• 2018

최근 나노임프린트 리소그래피 공정이 마이크로/나노 스케일의 소자 개발에 있어서 경제적으로 대량 생산할 수 있는 기술로 주목 받고 있다. 자외선경화 방식의 나노임프린트의 경우 상온 및 저압의 장점과 함께 비진공 환경에서 공정을 통하여 설비 비용의 저감과 생산공정의 고속화를 달성할 수 있다. 그러나 이 경우 비진공 환경에서 발생하는 기포결함의 문제를 해결해야만 한다. 본 연구에서는 비진공 환경에서의 자외선경화 방식의 나노임프린트 공정에서 몰드 중공부 단면의 형상과 기포결함 발생 관계를 연구하였다. 일반적으로 많이 사용되는 사각형 단면과 타원형 단면 그리고 삼각형 단면에 대하여 2차원 유동해석 및 VOF 방법을 통하여 기포결함을 시뮬레이션 하였고 단면의 형상과 다양한 접촉각에 따른 유동선단의 특성을 분석하였다. 해석결과 몰드 중공부 형상은 기포결함 발생에 매우 중요한 영향을 미치며, 고려된 형상 모두 몰드와의 접촉각이 작을수록, 기판과의 접촉각이 클수록 기포결함 발생 가능성이 작아짐을 알 수 있었다. 또한 타원형 형상이 기포결함 발생방지 측면에서 가장 효과적임을 확인하였다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제40권
• /
• pp.11.1-11.5
• /
• 2018

Background: Squamous cell carcinoma (SCC) is the most commonly occurring malignant tumor in the oral cavity. In South Korea, it occurs most frequently in the mandible, tongue, maxilla, buccal mucosa, other areas of the oral cavity, and lips. Radial forearm free flap (RFFF) is the most widely used reconstruction method for the buccal mucosal defect. The scar of the forearm donor, however, is highly visible and unsightly, and a secondary surgical site is needed when such technique is applied. For these reasons, buccal fat pad (BFP) flap has been commonly used for closing post-surgical excision sites since the recent decades because of its reliability, ease of harvest, and low complication rate. Case presentation: In the case reported herein, BFP flap was used to reconstruct a cheek mucosal defect after excision. The defect was completely covered by the BFP flap, without any complications. Conclusion: Discussed herein is the usefulness of BFP flap for the repair of the cheek mucosal defect. Also, further studies are needed to determine the possibility of using BFP flap when the defect is deep, and the maximum volume that can be harvested considering the changes in volume with age.

• 한국컴퓨터그래픽스학회논문지
• /
• 제29권3호
• /
• pp.79-84
• /
• 2023

이미지 생성 모델은 다양한 분야에 적용되어 데이터 부족 문제와 시간 및 비용 문제를 극복하고 있다. 그러나 규칙적 패턴 이미지에서의 이미지 생성과 해당 데이터의 결함 검출에는 한계를 가진다. 본 논문에서는 이미지 생성 모델의 패턴 이미지 생성의 가능성을 확인하고 OLED 패널의 결함 검출을 위한 데이터 증강에 적용하였다. OLED 결함 검출 모델을 학습하기 위해 필요한 데이터는 OLED 패널의 높은 비용 문제로 실제 데이터 세트를 확보하기 어렵다. 그렇기 때문에 해당 데이터 세트를 확보한다 하더라도 여러가지 결함 유형을 정의하고 분류하는 작업이 필요하다. 이를 위한 가상의 기반 데이터 세트를 획득할 OLED 패널 결함 데이터 획득 시스템을 소개하고, 이미지 생성 모델로 해당 데이터를 증강한다. 또, 확산모델에서의 패턴 이미지 생성의 어려움을 확인하여 가능성을 제안하고, 이미지 생성 모델 이용한 데이터 증강 및 결함 검출 데이터 증강의 제한 사항을 개선하였다.

• Clinical and Experimental Pediatrics
• /
• 제54권2호
• /
• pp.86-89
• /
• 2011

Traumatic ventricular septal defect (VSD) resulting from blunt chest injury is a very rare event. The mechanisms of traumatic VSD have been of little concern to dateuntil now, but two dominant theories have been described. In one, the rupture occurs due to acute compression of the heart; in the other, it is due to myocardial infarction of the septum. The clinical symptoms and timing of presentation are variable, so appropriate diagnosis can be difficult or delayed. Closure of traumatic VSD has been based on a combination of heart failure symptoms, hemodynamics, and defect size. Here, we present a case of a 4-year-old boy who presented with a traumatic VSD following a car accident. He showed normal cardiac structure at the time of injury, but after 8 days, his repeated echocardiography revealed a VSD. He was successfully treated by surgical closure of the VSD, and has been doing well up to the present. This report suggests that the clinician should pay great close attention to the patients injured by blunt chest trauma, keeping in mind the possibility of cardiac injury.

• 한국생산제조학회지
• /
• 제21권5호
• /
• pp.726-732
• /
• 2012

Pipe and Pressure Vessels that is used in power plant and chemical industry have many Internal Defects that is corrosion caused by the flow of fluid. These Internal Defects that have possibility of explosion are very dangerous because it can not see from the outside. This days many companys using NDT method to find an Internal Defect. Most of the NDT methods have limitations that are constraint of shape and materials. But Sheargoraphy have many advantages compared conventional NDT method. It has very fast measuring speed, non-destructive and non contacting measurement. As well as it hasn't constraint of shape and materials. As a paper on the analysis of measurement of error, the important factors were the Shearing Amount and pressure, and discovered measurement of the Internal Defect of the object by using shearography. The optimal Shearing Amount and pressure was discovered and utilized.

• Archives of Reconstructive Microsurgery
• /
• 제7권1호
• /
• pp.10-14
• /
• 1998

When covering a skin defect of the finger with a local flap is difficult, a vascular island flap is often used. For a palmar skin defect, it is desirable to add a sensory supply to the flap. This report describes a neurovascular island flap that was used to repair a palmar skin defect, the donor skin coming from the dorsal region of the middle phalanx. This flap is elevated with a vascular pedicle of the palmar digital artery and its dorsal skin branch, including the dorsal digital veins, palmar digital nerve and its cutaneous branches. The advantage of this flap are that it can be transferred with ease and without any tension. No special manipulation is required under a microscope and operation can be performed under a simple nerve-block. There if little possibility that the flap itself undergoes ischemic change or congestion. The disadvantage of this flap are that a skin graft is required at the donor skin site and one palmar digital aretery is lost. We think that this neurovascular island flap is one of the useful methods for skin defects that are difficult to cover with a local flap.

• 경영과정보연구
• /
• 제22권
• /
• pp.211-229
• /
• 2007

The ISO/TS16949 APQP goal of defect prevention and decrease of spread waste, is the customer satisfaction which leads a continuous improvement and profit creation. The quality expense where the most is caused by but with increase of production initial quality problem occurrence is increasing to is actuality. Like this confirmation amendment. with the problem which is forecast in the place development at the initial stage which it does completeness it does not confront not to be able, production phase to be imminent, the problem accumulates and it talks the development shedding of which occurs. In opposition, prediction confrontation. is forecast in development early stage to and it is a structure which does not occur a problem to production early stage. Like this development is a possibility of accomplishing competitive company from production phase. Which attains an goal of, chance cause it leads a APQP activity (common cause) with special cause prevention & detection the connection characteristic of the focus technique against a interaction is important. And the customer requirement satisfaction and must convert a APQP goal of attainment at the key characteristics action step. (1) The Prevention - with Design FMEA application prevention of the present design management/detection, (2) the Detection (prevention/detection) - with Process FMEA application prevention of the present process control/detection, (3) Special Cause - statistical process control (SPC) 4M cause spread removal, (4) Common Cause - statistical process control (SPC) the nothing zero defect which leads the continuous improvement back of spread with application it will be able to attain with application.

• 한국재료학회지
• /
• 제32권9호
• /
• pp.396-402
• /
• 2022

In this study, surface roughness and interfacial defect characteristics were analyzed after forming a high-k oxide film on the surface of a prime wafer and a test wafer, to study the possibility of improving the quality of the test wafer. As a result of checking the roughness, the deviation in the test after raising the oxide film was 0.1 nm, which was twice as large as that of the Prime. As a result of current-voltage analysis, Prime after PMA was 1.07 × 10 A/cm² and Test was 5.61 × 10 A/cm², which was about 5 times lower than Prime. As a result of analyzing the defects inside the oxide film using the capacitance-voltage characteristic, before PMA Prime showed a higher electrical defect of 0.85 × 10¹² cm^-2 in slow state density and 0.41 × 10¹³ cm^-2 in fixed oxide charge. However, after PMA, it was confirmed that Prime had a lower defect of 4.79 × 10¹¹ cm^-2 in slow state density and 1.33 × 10¹² cm^-2 in fixed oxide charge. The above results confirm the difference in surface roughness and defects between the Test and Prime wafer.

• 한국공작기계학회논문집
• /
• 제17권1호
• /
• pp.50-58
• /
• 2008

The SM45C metallic coupons have been tested under static tensile loading with acoustic emission (AE) as the load-deflection curve mainly. In this study, we used AE to detect the yielding of material and AE techniques was applied to rapidly estimate the mechanical characteristics of a material. First, coupons without an artificial defect were tested at different cross-head speed. For all cases in this analysis, yielding point of SM45C coupons did not appear definitely compared to mild steel, whereas coupons start to generate AE counts upon yielding. So all cases are normalized to know the possibility of accelerated life test of a material. And next, coupons with different from sizes of circular hole defects were tested at the same cross-head speed of 5 mm/min. Results were classified into 3 classes and analyzed by AE amplitude & signal strength as a function of time. Summarizing the specific conclusions, we need to additional research considering plate with width-ratio in order to estimate the fracture mechanism.