• 한국멀티미디어학회논문지
• /
• 제18권9호
• /
• pp.997-1007
• /
• 2015

In this paper, we propose a method for automatically analyzing the bone formation in a mouse model of frontal bone defect. We perforate two holes of 0.8mm diameter in the frontal bone and observe the bone formation process using a micro CT. Because the conventional analysis software of the micro CT does not support automatic analysis of the bone formation status, we have to use a manual analysis method. However the manual analysis is very cumbersome and requires a lot of time, we propose an automatic analysis method. It rotates the image around three axes directions so that the mouse's skull come into regular position. It calculates the cumulative image of the voxel values for the perforated bone surface. It estimates the hole location by finding the darkest point in the cumulative image. The proposed method was applied to 24 CT images of saline administration group and PTH administration group and hole location was estimated. BV/TV index was calculated for the estimated hole to evaluate the bone formation status. Experimental results showed that bone formation process is more active in PTH administration group. The method proposed in this paper could replace successfully the cumbersome and time consuming manual job.

• Archives of Reconstructive Microsurgery
• /
• 제22권2호
• /
• pp.43-47
• /
• 2013

Purpose: Un-healing and centrally located defect on back area, it is sometimes a challenge for the reconstructive surgeon. Although skin grafts are considered as the first choice for reconstruction of large skin defect on the back region, it is not always helpful but vascularized flaps provide a superior functional and aesthetic outcome. The present study was designed to investigate the clinical anatomy of the lumbar artery perforator flap to reconstruct back ulcer. Materials and Methods: Clinical anatomy study was undertaken using computed tomographic angiographic analysis. We identified the courses of lumbar arteries and its perforators, measured pedicle length by layers. The location of the perforator vessel was charted against anatomical landmarks. Results: The pedicle lengths of the third and fourth lumbar artery perforator reached a mean of 27.8 mm and 37.1 mm respectively from superficial fascia to deep fascia. The fourth perforator was more laterally located than the third perforator and less than 1 cm above the iliac crest. A case in which the fourth lumbar artery perforator was used as flap pedicle is described. Conclusion: For the reconstruction of central defect on the back area, the lumbar artery perforator flap coverage may be a good alternative option. Computed tomographic angiography can easily identify the course and location of lumbar artery perforators and can be helpful to elevate the flap successfully.

• 한국임상수의학회지
• /
• 제19권1호
• /
• pp.110-113
• /
• 2002

An atrial septal defect (ASD) is a congenital hole in the atrial septum that allows flow between the two atria. Small ASDs are usually well-tolerated defects and do not result in significant clinical abnormalities. In large ASDs or in the presence of other cardiac defects, clinically significancy is increased. Atrial septal defects in 2 Dogs with cardiac and respiratory signs were diagnosed at seoul animal medical center. In ascultation, systolic murmur and the splitting of second heart sound were heard at pulmonary or tricuspid valve region. In radiograph, right-sided cardiomegaly, pulmonary artery dilation, increased pulmonary vasculature makings, and pleural effusion or pulmonary edema signs were observed. In echocardiography, the region, location and size of septal defect was identified. Also, the direction and degree of shunt was measured. These dogs were treated with medicine for cardiac failure. One dog is well-tolerated, the other dog died.

• 대한기계학회논문집A
• /
• 제28권4호
• /
• pp.402-409
• /
• 2004

The purpose of this study is to investigate the effect of local wall thinning on the collapse of elbow subjected to internal pressure and bending moment. Thus, the nonlinear three-dimensional finite element analyses were performed to obtain the collapse moment of elbow containing various wall thinning defects located at intrados and extrados under two loading modes (closing and opening modes) with internal pressure. From the results of analysis, the effect of wall thinning defect on the global moment-rotation behavior of elbow was discussed, and the dependence of collapse moment of elbow on wall thinning depth, length, and circumferential angle was investigated under different loading mode and defect location.

• Journal of Trauma and Injury
• /
• 제31권2호
• /
• pp.91-95
• /
• 2018

Managing large infected midline abdominal defects are clinically challenging and technically demanding. The alloplastic materials, regional flaps, and component separation are usually infeasible because of the size, location, depth, and state of the defects. In these cases, the free flap is the only option with a large well-vascularized tissue that is free to inset regardless of the location. Herein, we report a case of 44-year-old man with a large infected midline abdominal wall defect who was completely treated with a latissimus dorsi myocutaeous free flap followed by negative pressure wound therapy.

• 한국건축시공학회지
• /
• 제20권6호
• /
• pp.567-576
• /
• 2020

본 연구는 공동주택의 하자소송의 사례분석을 통해 하자소송단계에서 추가적으로 하자로 인정되는 하자 항목을 제안한다. 이 하자 항목은 하자소송에서 추가적인 비용의 증가, 일정 지연, 재감정 혹은 추가소송을 방지할 수 있을 것이다. 하자소송에서는 입주자 및 건설사에서 사전에 인지하지 못한 새로운 하자항목이 발생되며, 이를 새로운 하자인정항목으로 정의하였다. 이를 위해 본 연구에서는 국내의 15개의 하자소송의 사례분석을 실시하였다. 이를 통해 77개의 소송하자를 1차 선별하고 전문가 자문을 통해 최종적으로 23개의 소송하자를 도출하였다. 이후 하자의 요인을 분석하여 최종적으로 23개의 소송항목을 총 10개의 요인항목으로 정립하였으며, 사례연구를 통해 효용성을 분석하였다. 본 연구의 결과는 하자의 발생을 저감하고 분쟁을 최소화하는 데 기여할 수 있을 것이다.

• 제어로봇시스템학회논문지
• /
• 제13권11호
• /
• pp.1060-1066
• /
• 2007

When a high-energy ultrasound propagates through a solid body that contains a crack or a delamination, the two faces of the defect do not ordinarily vibrate in unison, and dissipative phenomena such as friction, rubbing and clapping between the faces will convert some of the vibrational energy to heat. By combining this heating effect with infrared imaging, one can detect a subsurface defect in material efficiently. In this paper a detection of the welding defect of thin SUS 304 plates using the UIR (ultrasonic infrared imaging) technology is described. A low frequency (20kHz) ultrasonic transducer was used to infuse the welded thin SUS 304 plates with a short pulse of sound for 280ms. The ultrasonic source has a maximum power of 2kW. The surface temperature of the area under inspection is imaged by a thermal infrared camera that is coupled to a fast frame grabber in a computer. The hot spots, which are a small area around the defect tip and heated up highly, are observed. From the sequence of the thermosonic images, the location of defective or inhomogeneous regions in the welded thin SUS 304 plates can be detected easily.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제16권1호
• /
• pp.245-265
• /
• 2022

In response to problems such as insufficient extraction information, low detection accuracy, and frequent misdetection in the field of Thangka image defects, this paper proposes a YOLOv5 prediction algorithm fused with the attention mechanism. Firstly, the Backbone network is used for feature extraction, and the attention mechanism is fused to represent different features, so that the network can fully extract the texture and semantic features of the defect area. The extracted features are then weighted and fused, so as to reduce the loss of information. Next, the weighted fused features are transferred to the Neck network, the semantic features and texture features of different layers are fused by FPN, and the defect target is located more accurately by PAN. In the detection network, the CIOU loss function is used to replace the GIOU loss function to locate the image defect area quickly and accurately, generate the bounding box, and predict the defect category. The results show that compared with the original network, YOLOv5-SE and YOLOv5-CBAM achieve an improvement of 8.95% and 12.87% in detection accuracy respectively. The improved networks can identify the location and category of defects more accurately, and greatly improve the accuracy of defect detection of Thangka images.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 춘계학술대회 논문집
• /
• pp.293-298
• /
• 2003

This study deals with the source location method of defect which can be occurred in structure. The existing methods was very difficult to be applied to predict it because of using very complex numerical formula. The triangulation method which was proposed in his study can predict the source location predicted easily with small amount of data. Wave arrival time data can be directly converted into source-sensor distance is known. For this purpose, the propagation velocity was measured by Rayleigh wave, and the propagation behavior was analyzed. For the consideration of jointed part in structure, the source location method was applied to the welded workpiece. The signal propagation velocity was measured in welding part for the purpose of application to the part and the revised algorithm of source location was proposed.

• 비파괴검사학회지
• /
• 제30권2호
• /
• pp.91-97
• /
• 2010

본 연구는 전단위상 위상잠금 적외선열화상기술을 이용한 금속재료 시편의 내부결함을 평가하는 방법에 대한 연구 결과이다. 특히, STS304와 Cu-Zn 시편에 대한 비파괴시험 및 평가는 종래에는 적정한 실험 조건하에서 주로 시행됨에 따라 결항의 형태나 존재를 알 수 없는 상황에서는 최적실험조건을 찾는 일은 오랜 시간이 걸리는 단점이 있었다. 본 연구에서는 위상잠금방볍과 전단위상검출방법을 활용하여 60 MHz 신호로 설정된 가열 조건에서 결함의 위치 및 크기를 평가하였다. 전단위상분포는 시편 내부결함의 크기와 위치를 정량적으로 결정하기 위하여 최대, 최소, 영점을 이용하는 방법이다. 연구 결과로써 인공결함을 갖는 STS 304와 Cu7-Zn3 시험편에 대하여 제안된 기법의 적용을 검증하였으며, 결함평가에 영향을 주는 인자를 추출하고 그 영향을 분석하였다.