• Journal of the Korean Physical Society
• /
• v.73 no.11
• /
• pp.1794-1798
• /
• 2018

We have grown famatinite $Cu_3SbS_4$ films by using sulfurization of Cu/Sb stack film. Sulfurization at $500^{\circ}C$ produced famatinite $Cu_3SbS_4$ phase, while $400^{\circ}C$ and $450^{\circ}C$ sulfurization exhibited unreacted and mixed phases. The fabricated $Cu_3SbS_4$ film showed S-deficiency, and secondary phase of $Cu_{12}Sb_4S_{13}$. The secondary phase was confirmed by X-ray diffraction, Raman spectroscopy, photoluminescence and external quantum efficiency measurements. We have also fabricated solar cell in substrate type structure, ITO/ZnO/(Zn,Sn)O/$Cu_3SbS_4$/Mo/glass, where $Cu_3SbS_4$ was used as a absorber layer and (Zn,Sn)O was employed as a Cd-free buffer. Our best cell showed power conversion efficiency of 0.198%. Characterization results of $Cu_3SbS_4$ absorber indicates deep defect (due to S-deficiency) and low shunt resistance (due to $Cu_{12}Sb_4S_{13}$ phase). Thus in order to improve the cell efficiency, it is required to grow high quality $Cu_3SbS_4$ film with no S-deficiency and no secondary phase.

• Current Photovoltaic Research
• /
• v.11 no.3
• /
• pp.87-95
• /
• 2023

As the demand for the Internet of Things grows, research into indoor photovoltaics for wireless power is becoming important. In particular, perovskite has attracted considerable attention due to its superior performance compared to other candidates. However, various surface defects present in perovskite are a limiting factor for high performance. In particular, deep-level surface defects caused by uncoordinated Pb²⁺ ions directly limit charge transport. In low light environments, this appears to be a more significant hurdle. In this study, ethylenediamine, which can provide covalent bonding to uncoordinated Pb²⁺ ions through nitrogen, was used as a surface treatment material for indoor photovoltaics. X-ray photoelectron spectroscopy confirmed that the uncoordinated Pb²⁺ ions were effectively passivated by the terminal nitrogen of ethylenediamine. As a consequence, a V_OC of 0.998 V, a JSC of 0.139 mA cm^-2 and a fill factor of 83.03% were achieved, resulting in an indoor photoelectric conversion efficiency of 38.02%.

• Journal of the Daesoon Academy of Sciences
• /
• v.19
• /
• pp.125-143
• /
• 2005

This study offers an analysis of how Protestant Christianity in South Korea incorporated many beliefs and practices of Korean traditional religions in order to make the new faith more appealing to the masses. The paper also examines the way in which specific Protestant doctrines and practices were modified or accentuated to suit the disposition of the Korean people. In agreement with Confucianism, for example, Protestant churches in general emphasized the values of diligence, self-cultivation, righteous living, and, most importantly, filial piety. By overtly and subtly permitting ancestral rites to be conducted by Christians, moreover, Protestant Christianity evaded successfully the potential alienation of the tradition-bound Koreans. From Buddhism, Protestant Christianity syncretized such elements as the daily dawn prayer and all-night prayer as well as the practices of baekilgido ("a hundred-day prayer") and chunilgido ("a thousand-day prayer"). Hundreds of prayer centers that exist deep in the mountains also manifest a Buddhist influence. Shamanistic influences are also evident in Korean Protestantism, replete with the latter's emphasis on this-worldly success (health, prosperity, long life, etc.), faith healing, and conceptualization of God as being merciful and generous. What all of this reveals is that Christian conversion in South Korea did not involve an exclusivistic change of religious affiliation, meaning that it did not require the repudiation of traditionally held beliefs. Instead, millions of South Koreans eagerly embraced Protestant Christianity precisely because the new faith was advanced as an extension or continuation of traditional religious practices.

• Convergence Security Journal
• /
• v.24 no.2
• /
• pp.161-165
• /
• 2024

Recently, speech recognition models have been advancing, accompanied by the development of various speech processing technologies to obtain high-quality data. In the defense sector, efforts are being made to integrate technologies that effectively remove noise from speech data in noisy battlefield situations and enable efficient speech recognition. This paper proposes a method for effective speech recognition in the midst of diverse noise in a battlefield scenario, allowing commanders to convey orders. The proposed method involves noise removal from noisy speech followed by text conversion using OpenAI's Whisper model. Experimental results show that the proposed method reduces the Character Error Rate (CER) by 6.17% compared to the existing method that does not remove noise. Additionally, potential applications of the proposed method in the defense are discussed.

• Journal of Chest Surgery
• /
• v.36 no.8
• /
• pp.559-565
• /
• 2003

By improving the flow pattern in Fontan circuit, total cavopulmonary connection (TCPC) could result in a better outcome than atriopulmonary connection Fontan operation. For the patients with impaired hemodynamics after atriopulmonary Fontan connection, conversion to TCPC can be expected to bring hemodynamic and functional improvement. We studied the results of the revision of the previous Fontan connection to TCPC in patients with failed Fontan circulation. Material and method: From October1979 to June 2002, eight patients who had failed Fontan circulation, underwent revision of previous Fontan operation to TCPC at Yonsei University Hospital. Intracardiac anomalies of the patients were tricuspid atresia (n=4) and other functional single ventricles (n=4). Mean age at TCPC conversion was 14.0$\pm$7.0 years (range, 4.6~26.2 years) and median interval between initial Fontan operation and TCPC was 7.5 years (range, 2.4~14.3 years). All patients had various degree of symptoms and signs of right heart failure. NYHA functional class was 111 or IV in six patients. Paroxysmal atrial fibrillation (n:f), cyanosis (n=2), intraatrial thrombi (n=2), and protein losing enteropathy (PLE) (n=3) were also combined. The previous Fontan operation was revised to extracardiac conduit placement (n=7) and intraatrial lateral tunnel (n=1). Result: There was no operative death. Major morbidities included deep sternal infection (n=1), prolonged pleural effusion over two weeks (n=1), and temporary junctional lachyarrhythrnia (n=1). Postoperative central venous Pressure was lower than the preoperative value (17.9$\pm$3.5 vs. 14.9$\pm$1.0, p=0.049). Follow-up was complete in all patients and extended to 50,1 months (mean, 30.3$\pm$ 12.8 months). There was no late death. All patients were in NYHA class 1 or 11. Paroxysmal supraventricular tachycardia developed in a patient who underwent conversion to intraatrial lateral tunnel procedure, PLE was recurred in two patients among three patients who had had PLE before the convertsion. There was no newly developed PLE. Conclusion: Hemodynamic and functional improvement could be expected for the patients with Fontan circulatory failure after atriopulmonary connection by revision of their previous circulation to TCPC. The conversion could be performed with low risk of morbidity and mortality.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.7
• /
• pp.699-707
• /
• 2020

With the development of deep learning technology, voice processing-related technology is applied to various areas, such as STT (Speech To Text), TTS (Text To Speech), ChatBOT, and intelligent personal assistant. In particular, the STT is a voice-based, relevant service that changes human languages to text, so it can be applied to various IT related services. Recently, many places, such as general private enterprises and public institutions, are attempting to introduce the relevant technology. On the other hand, in contrast to the general IT solution that can be evaluated quantitatively, the standard and methods of evaluating the accuracy of the STT engine are ambiguous, and they do not consider the characteristics of the Korean language. Therefore, it is difficult to apply the quantitative evaluation standard. This study aims to provide a guide to an evaluation of the STT engine conversion performance based on the characteristics of the Korean language, so that engine manufacturers can perform the STT conversion based on the characteristics of the Korean language, while the market could perform a more accurate evaluation. In the experiment, a 35% more accurate evaluation could be performed compared to the existing methods.

• Asian-Australasian Journal of Animal Sciences
• /
• v.31 no.11
• /
• pp.1766-1772
• /
• 2018

Objective: This experiment was to investigate the effect of increasing levels of apparent metabolizable energy ($AME_n$) on the laying performance, egg quality, blood parameters, blood biochemistry, intestinal morphology, and apparent total tract digestibility (ATTD) of energy and nutrients in diets fed to laying hens. Methods: A total of three-hundred twenty 33-week-old Hy-Line Brown laying hens (Gallus domesticus) were evenly assigned to four experimental diets of 2,750, 2,850, 2,950, and 3,050 kcal $AME_n/kg$ in pens with floors covered with deep litter of rice hulls. There were four replicates of each treatment, each consisting of 20 birds in a pen. Results: $AME_n$ intake was increased (linear, p<0.05) with inclusion level of $AME_n$ in diets increased. Feed intake and feed conversion ratio were improved (linear, p<0.01), but hen-day egg production tended to be increased with an increasing level of $AME_n$ in diets. During the experiment, leukocyte concentration and blood biochemistry (total cholesterol, triglyceride, glucose, total protein, calcium, asparate aminotransferase, and alanine transferase were not influenced by increasing level of $AME_n$ in diets. Gross energy and ether extract were increased (linear, p<0.01) as the inclusion level of $AME_n$ in diets increased. Conclusion: Laying hens fed high $AME_n$ diet (i.e., 3,050 kcal/kg in the current experiment) tended to overconsume energy with a positive effect on feed intake, feed conversion ratio, nutrient digestibility, and intestinal morphology but not on egg production and egg mass.

• Journal of Chest Surgery
• /
• v.36 no.5
• /
• pp.329-334
• /
• 2003

Backgound: Cryoablation and radiofrequency ablation have been used to treat the atrial fibrillation. Some reports insisted that the microwave ablation Is a better method for a deep and extensive lesion. Material and Method: From December 2001 to July 2002, we peformed 8 microwave ablations in patients who needed mitral valve surgery (7 MVR, 1 MVR+AVR). There were 3 men and 5 women, and their mean age was 43.4$\pm$8.3 years and mean follow up period was 5.6$\pm$2.4 months respectively. The microwave was applied on endocardium or epicardium by Lynx (Afx, inc.) using a power of 45 watts for 25 seconds. We studied the left atrial dimension, the left atrial function and the sinus conversion with echocardiography and electro-cardiography at three times; 1) before the operation, 2) immediately after the operation, and 3) 6 months after the operation. Result: There was no complication and no mortality. The mean aortic clamping time was 104.6$\pm$25.0 minutes, and the mean total bypass time was 130.5$\pm$28.7 minutes. The rate of sinus conversion was 75%, A wave across the mitral valve was a mean of 77.0$\pm$24.8 cm/sec, and the AVE was a mean of 0.46$\pm$0.17 at 5.6 months postoperatively Conclusion: There was no difference in the early result of microwave ablation compared to other methods. The microwave ablation was an acceptable method due to its convenient application especially in beating heart.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.15 no.1
• /
• pp.63-79
• /
• 1993

To repair bony defects with tansplanted bone in the body, fresh autogenous bone is undoubtly, the most effective bone graft for clinical applications. But the demineralized bone has the matrix-induced bone formation which was suggested by Urist in 1965. Many authors assisted that demineralized bone powder induces phenotypic conversion of mesenchymal cells into osteoblasts, with high-density bone formation. The process of inducing differentiated cells becomes osteogenic properties. The purpose of this study was to evaluate the osteoinductive capacity of allogenic freeze-dried demineralized bone block (FDD, $7{\times}7mm$) and to compare FDD with the same sue of deep-frozen allogenic bone(DF), fresh autogenous bone (A) after implantation. The histological and ultrastructural features of tissue responses were examined after 1, 2, 4, 6, 8 weeks implantation of each experimental groups in the operative site of the New Zealand white rabbits. The results were as follows : 1. Inflammatory cell infiltration generally has appeared at 1 week, but reduced at 4 weeks in each group, but most severe in DF group. 2. Osteoblastic activity has increased for 4 weeks, but decreased at 6 weeks in each group and there was no significant difference among experimental groups. 3. New bone formation has begun at 1week, least activations in A groups, and showed the revesal line of bone formation among each group at 6 to 8 weeks. 4. Bone resorption has appeared at 1 week, but disappeared at 4 weeks in both A and DF groups, but more severe in DF than A groups. 5. In ultrastructural changs, the DF group have showed the most remarkable osteoclastic activities among experimental groups. 6. Osteoid or tangled collagen fibrils near the implanted sites were replaced by more mature, lamellated bony trabeculae during bone remodeling. There was little difference among each experimental groups. 7. During the convertion osteoblasts to osteocytes which embedded within the bone matrix, there was organ-less-poor cytoplasm, increased nuclear chromatin, abundant rough endothelial reticulum (RER) in each groups. From the above the findings, the DF group shored more bone resorption and foreign body reaction than FDD and A groups, and FDD group showed more new bone formation or osteoblastic activity than DF and A groups in early stage. There was no significant difference of cellular activities among the FDD DF, and A groups according to the time.

• Journal of the Mineralogical Society of Korea
• /
• v.15 no.3
• /
• pp.231-240
• /
• 2002

Microbial metal reduction influences the biogeochemical cycles of carbon and metals as well as plays an important role in the bioremediation of metals, radionuclides, and organic contaminants. The use of bacteria to facilitate the production of magnetite nanoparticles and the formation of carbonate minerals may provide new biotechnological processes for material synthesis and carbon sequestration. Metal-reducing bacteria were isolated from a variety of extreme environments, such as deep terrestrial subsurface, deep marine sediments, water near Hydrothemal vents, and alkaline ponds. Metal-reducing bacteria isolated from diverse extreme environments were able to reduce Fe(III), Mn(IV), Cr(VI), Co(III), and U(VI) using short chain fatty acids and/or hydrogen as the electron donors. These bacteria exhibited diverse mineral precipitation capabilities including the formation of magnetite ($Fe_3$$O_4$), siderite ($FeCO_3$), calcite ($CaCO_3$), rhodochrosite ($MnCO_3$), vivianite [$Fe_3$($PO_4$)$_2$ .$8H_2$O], and uraninite ($UO_2$). Geochemical and environmental factors such as atmospheres, chemical milieu, and species of bacteria affected the extent of Fe(III)-reduction as well as the mineralogy and morphology of the crystalline iron mineral phases. Thermophilic bacteria use amorphous Fe(III)-oxyhydroxide plus metals (Co, Cr, Ni) as an electron acceptor and organic carbon as an electron donor to synthesize metal-substituted magnetite. Metal reducing bacteria were capable of $CO_2$conversion Into sparingly soluble carbonate minerals, such as siderite and calcite using amorphous Fe(III)-oxyhydroxide or metal-rich fly ash. These results indicate that microbial Fe(III)-reduction may not only play important roles in iron and carbon biogeochemistry in natural environments, but also be potentially useful f3r the synthesis of submicron-sized ferromagnetic materials.