• 아시안잔디학회지
• /
• 제17권1호
• /
• pp.45-51
• /
• 2003

본 연구는 녹지주변의 토지이용형태의 차이가 녹지내의 기온저감효과에 미치는 영향을 정량적으로 파악하기 위해 녹지내외의 기온분포를 관측하였다. 그 데이터를 바탕으로 녹지내의 토지피복현황과 기온, 녹지주변의 기온저감효과와 그 영향범위 및 수목그루와 기온저감효과와의 관련성을 회귀분석 등에 의해 해석하였다. 그 결과 녹지내의 고온역은 포장면, 나지 주변에서 저온역은 수림지, 수면 주변에서 형성되었다. 또한 녹지를 중심으로 풍하 쪽의 관측치는 최저기온보다 최고기온이 편차가 크지만, 전체적으로는 녹지에 가까워질수록 기온이 낮아지는 경향을 보였다. 토지피복비율과 기온과의 관계를 보면, 수림지, 초지 및 수면은 기온저감에 효과적이고, 그 토지피복비율의 증감에 따라 기온저감효과가 서로 달랐다. 녹지주변의 토지이용형태의 차이가 녹지내의 기온저감효과에 미치는 영향은 Shakuzi park(주거전용지역)보다 Ageomaruyama Park (시가화조정구역) 상대적으로 효과가 컸다.

• Asian Journal of Atmospheric Environment
• /
• 제10권4호
• /
• pp.179-189
• /
• 2016

Here we evaluated the effect of using water retentive pavement or WRP made from fly ash as material for main street in a real city block. We coupled computational fluid dynamics and pavement transport (CFD-PT) model to examine energy balance in the building canopies and ground surface. Two cases of 24 h unsteady analysis were simulated: case 1 where asphalt was used as the pavement material of all ground surfaces and case 2 where WRP was used as main street material. We aim to (1) predict diurnal variation in air temperature, wind speed, ground surface temperature and water content; and (2) compare ground surface energy fluxes. Using the coupled CFD-PT model it was proven that WRP as pavement material for main street can cause a decrease in ground surface temperature. The most significant decrease occurred at 1200 JST when solar radiation was most intense, surface temperature decreased by $13.8^{\circ}C$. This surface temperature decrease also led to cooling of air temperature at 1.5 m above street surface. During this time, air temperature in case 2 decreased by $0.28^{\circ}C$. As the radiation weakens from 1600 JST to 2000 JST, evaporative cooling had also been minimal. Shadow effect, higher albedo and lower thermal conductivity of WRP also contributed to surface temperature decrease. The cooling of ground surface eventually led to air temperature decrease. The degree of air temperature decrease was proportional to the surface temperature decrease. In terms of energy balance, WRP caused a maximum increase in latent heat flux by up to $255W/m^2$ and a decrease in sensible heat flux by up to $465W/m^2$.

• 동력기계공학회지
• /
• 제9권4호
• /
• pp.137-142
• /
• 2005

The effects of temperature and initial crack length on impact fracture behavior of side plate material of 35 ton class FRP ship, which are composed by glass fiber and unsaturated polyester resin, were investigated. Impact fracture toughness of GF/PE composites displayed maximum value when the temperature of specimen is room temperature and $50^{\circ}C$, and with decrease in temperature of specimen, impact fracture toughness decreased. Impact fracture energy of GF/EP composites decreased with increase in initial crack length of specimen, and this value decreased rapidly when the temperature of specimen is lowest, $-25^{\circ}C$,. It is believed that sensitivity of notch on impact fracture energy were increased with decrease in temperature of specimen. As the GF/EP composites exposed in low temperature, impact fracture toughness of composites decreased gradually owing to the decrease of interface bonding strength caused by difference of thermal expansion coefficient between the glass fiber/polyester resin. Further, decrease of interface bonding strength of composites with decrease in specimen temperature was ascertained by SEM photograph of impact fracture surface.

• 수산해양기술연구
• /
• 제45권3호
• /
• pp.188-193
• /
• 2009

The present study was undertaken to evaluate the effect of temperature on the results of Charpy impact test for glass fiber reinforced polyurethane(GF/PUR) composites. The Charpy impact test were conducted in the temperature range from -50$^{\circ}$ to 50$^{\circ}$. The impact fracture toughness of GF/PUR composites was considerably affected by temperature and it was shown that the maximum value was appeared at room temperature. It is believed that sensitivity of notch on impact fracture energy were increased with decrease in temperature of specimen. As the GF/PUR composites exposed in low temperature, impact fracture toughness of composites decreased gradually owing to the decrease of interface bonding strength caused by difference of thermal expansion coefficient between the glass fiber/polyurethane resin. And decrease of interface bonding strength of composites with decrease in specimen temperature was ascertained by SEM photographs of Charpy impact fracture surface.

• 환경생물
• /
• 제20권1호
• /
• pp.10-19
• /
• 2002

녹지의 규모와 녹지내외의 기온저감효과와의 관련성을 명확히 밝히는 것을 목적으로 규모가 서로 다른 4개의 녹지를 대상으로 기온분포를 관측하였다. 그 데이터를 근거로 녹지내외의 기온분포, 녹지주변의 기온저감효과와 그 영향범위, 녹지내의 기온저감효과와 그 강도 및 토지피복비율과 기온, 그리고 녹지의 규모와 기온저감효과와의 관련성을 회귀분석 등에 의해 해석하였다. 그 결과, 토지피복현황의 차이가 기온변화에 영향을 미치고 있는 것을 알았다. 풍상과 풍하쪽의 기온저감효과의 영향범위를 비교하면, 풍하쪽에는 저온역이 형성되었고, 그 효과는 녹지의 규모가 크면 클수록 기온저감효과의 영향범위가 확대되었다. 더욱이 녹지내외의 기온저감효과는 녹지의 규모와 거의 비례하는 경향을 보였다

• 제어로봇시스템학회논문지
• /
• 제13권2호
• /
• pp.173-178
• /
• 2007

This paper is to establish an appropriate model for predicting the temperature decreases in the batch transferred from the refining process to the caster in steel-making companies. Mathematical modeling of the temperature decreases between the processes is difficult, since the reaction mechanism by which the temperature changes in a molten steel batch is dynamic, uncertain and complex. Three soft computing techniques are examined using the same data, namely the multiple regression, fuzzy regression, and neural net (NN) models. To compare the accuracy of these three models, a limited number of input variables are selected from those variables significantly affecting the temperature decrease. The results show that the difference in accuracy between the three models is not statistically significant. Nonetheless, the NN model is recommended because of its adaptive ability and robustness. The method presented in this paper allows the temperature decrease to be predicted without requiring any precise metallurgical knowledge.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제2권1호
• /
• pp.1-14
• /
• 2002

High temperature operating test, temperature humidity test and temperature cycling were performed at various test levels for solid aluminum electrolyte capacitors made by domestic manufacturing company and foreign advanced manufacturing company. It was found that main failure mode of solid aluminum electrolyte capacitors was the decrease of their capacitances. The decrease of their capacitances has the same pattern in these tests. Test result for comparison of characteristics between domestic products and foreign advanced products shows that domestic products have the shorter lifetime and their capacitances decrease more rapidly in high temperature operating test and temperature humidity test. Also in these tests, accelerated tests for high temperature operating test and temperature humidity test were developed.

• Structural Engineering and Mechanics
• /
• 제65권3호
• /
• pp.343-348
• /
• 2018

This paper reports mechanical behavior of recycled fine aggregate concretes after high temperatures. It is found that compressive strength of recycled fine aggregate concretes decline significantly as the temperature rises. The elastic modulus of recycled fine aggregate concretes decreases with the increase in temperature, and the decrease is much quicker than the decrease in compressive strength. The split tensile strength of recycled fine aggregate concrete decrease as the temperature rises. Through the regression analysis, the relationship of the mechanical behavior with temperature are proposed, including the compressive behavior, elastic modulus and split tensile strength, which are fitting the test data.

• 한국균학회지
• /
• 제34권2호
• /
• pp.88-91
• /
• 2006

가평에서 낮은 생산성을 보이는 저온성 품종과 고온성 품종의 균사상태 및 골목 표면에 형성된 해균에 대한 조사를 시도했다. 순수배지에서의 균사생장력을 조사한 결과, 저온성 균주는 분리균에 비해 보존균의 생장력이 1.1% 정도 떨어지는 것으로 나타났으며, 고온성 균주는 분리균의 생장력이 보존균의 생장력에 비해 8.0% 정도 떨어지는 것으로 나타났다. 톱밥배지에서의 균사생장력을 조사한 결과, 고온성 분리균은 보존균에 비해 10.8%정도 생장력이 떨어졌으며, 저온성 분리균은 보존균에 비해 25.1% 떨어지는 것으로 나타났다. 중량감소율 조사결과, 고온성 분리균은 보존균에 비해 20.1% 정도 중량감소율이 낮았으며, 저온성 분리균도 보존균에 비해 19.0%정도 낮은 것으로 나타났다. 무처리에 비해서는 고온성 보존균이 107.0%, 고온성 분리균이 49.5%, 저온성 보존균이 85.4%,저온성 분리균이 50.0% 더 감소된 것으로 나타났다. 대치배양한 결과, 고온성 분리균과 저온성 분리균 모두 각각의 해당 보존균들과 동일한 균주임을 확인할 수 있었다. 또한 골목에서 검은혹버섯(Hypoxylon truncatum), 구름버섯(Coriolus versicolor), 기와층버섯(Inonotus xeranticus), 삼색도장버섯(Daedaleopsis tricolor), 이중껍질버섯(Graphostroma platystoma), 점균류(Myxomycetes) 2종, 푸른 곰팡이(Trichoderma sp.), Hypoxylon fragiforme, Hypoxylon howeianum, Nitschkia confertula 등 총 11종의 해균이 발견되었으며, 골목들의 상태는 좋지 않았다.

• Journal of Welding and Joining
• /
• 제32권1호
• /
• pp.66-70
• /
• 2014

In Ti active brazing of YSZ to STS 430 using Ag-Cu Filler Metal, the effect of Ti contents on the shear bonding strength were investigated together with the effect of brazing temperature and holding time. The addition of Ti in Ag-Cu Filler Metal increased the bonding strength up to 4.68% Ti, followed by the decrease with further addition. This seems to be caused by formation of TixOy at the reaction layer. Brazing temperature was optimized at $960^{\circ}C$ among a given temperature ranges. The addion of Sn to Ag-Cu filler metal brought the decrease of its melting temperature its melting temperature without a significant decrease of bonging strength.