• 오토저널
• /
• 제13권6호
• /
• pp.65-71
• /
• 1991

This paper describes briefly the effect of ultrasonic vibrations on the performance of four cycle diesel engine. Experiments were carried out to clarify the effect of ultrasonic vibrations on the characteristics of viscosity, structure of diesel oil, fuel consumption rate, brake thermal efficiency, smoke emissions, cylinder pressure of engine. The results are obtained as follows: 1. The ultrasonic vibrations of diesel oil result in the decrease of kinematic viscosity, Brachness Index of diesel oil. 2. The ultrasonic vibrations of diesel oil result in the decrease of fuel consumption rate, the improvement of brake thermal efficiency of engine. 3. The ultrasonic vibrations of diesel oil result in the decrease of smoke emissions of engine.

• 한국주조공학회지
• /
• 제9권4호
• /
• pp.327-335
• /
• 1989

The matrix structure and the morphology of CV graphite are affected by the addition of many kinds of elements, which are contained in the CV graphite cast iron, additives, fading time and cooling rate. The effects of cooling rate on the matrix structure, the shape of CV graphite, mechanical properties and propagation of ultrasonic wave in hypoeutectic CV graphite cast iron were studied. When the diameters of the samples are 50mm, 35mm and 20mm 1. CV graphite number showed average 17.9% increase and CV graphite length showed 10.3% decrease with decreasing diameter of the samples. 2. The amount of graphite and ferrite showed average 11.2, 4.1 % decrease and the amount of pearlite showed average 15.7% increase. 3. Hardness and tensile strength showed average 3.5%, 11.3% increase and impact strength showed average 1.5% decrease. 4. Ultrasonic wave velocity showed average 1.1% increase.

• 한국주조공학회지
• /
• 제9권4호
• /
• pp.336-344
• /
• 1989

The matrix structure and the morphology of CV graphite are affected by the addition of many kinds of elements, which are contained in the CV graphite cast iron, additives, fading time and cooling rate. The effects of cooling rate on the matrix structure, the shape of CV graphite, mechanical properties and propagation of ultrasonic wave in eutectic CV graphite cast iron were studied. When the diameters of the samples are 50mm, 35mm and 20mm 1. CV graphite number showed average 13.8% increase and CV graphite length showed 12.3% decrease with decreasing diameter of the samples. 2. The amount of graphite and ferrite showed average 10.6, 4.3% decrease and the amount of pearlite showed average 23.4% increase. 3. Hardness and tensile strength showed average 3.2%, 9.5% increase and impact strength showed average 1.3% decrease. 4. Ultrasonic wave velocity showed average 1.1% increase.

• Journal of Ginseng Research
• /
• 제15권2호
• /
• pp.139-143
• /
• 1991

This study investigated the relations between the photosynthetic rate and the activities of antioxidatile enzymes, glutathione reductase, ascorbate free radical reductase, ascorbate peroxidase, glutathione peroxidase, and ascorbate oxidase, in the leaves of Panax ginseng. Under the normal cultivation condition, Panax in showed lower g1utathione reductase and ascorbate free radical reductase activities the Glycine max. But P ginseng showed higher 91utathione Peroxidase, ascorbate Peroxidase, and ascorbate oxidase activities than C. Panax. Therefore, P. ginseng showed weak activities of reductases for the reduction of the oxidized antioxidants. Under the light intensity of 25 KLux, the reductases showed a decrease of over 75% after 24 hours. But the peroyoxidases decreased about 40%. These results showed that the decrease of reductases acitivities was consistent with the decrease of photosynthetic rate. Therefore, we consider that the regulation of antioxidative enzymes or the application of exogenous antioxidants will be effective means for the protection of photodamage in p. ginseng.

• 한국환경과학회지
• /
• 제30권3호
• /
• pp.245-255
• /
• 2021

In this study, we evaluated the effect of the type of sewage sludge (digested, non digested) on drying efficiency according to the polymer injection rate. The drying characteristics were shown using a near-infrared ray (NIR) and a microwave. As a result of the drying characteristics with NIR at a polymer dose ratio of 8%, the heating up period is up to 6 minutes after the start of the drying experiment. Afterwards, the constant rate drying period of the digested sludge (A, C and G sites) was 6 minute → 18 minute, showing a rapid decrease in moisture. On the other hand, non digested sludge (B, D, E, F, H, I, J and K sites) showed gradual drying characteristics compared to digested sludge until complete drying (10%). As the polymer dose ratio of 10% and 12%, the heating up period for digested sludge is up to 6 minute after the start of the experiment. Afterwards, the constant rate drying period of the digested sludge was 6 minute → 20 minute, showing a rapid decrease in moisture. On the other hand, the heating up period of non digested sludge was up to 10 minute after the start of the experiment, and the constant rate drying period was 10 minute → 22 minute, which was shorter than digested sludge. As a result of the drying characteristics with microwave at a polymer dose ratio of 8%, 10% and 12%, the constant rate drying period the digested sludge was 4 minute → 20~22 minute, showing a rapid decrease in moisture. On the other hand, non digested sludge of the constant rate drying period was 4 minute → 22~30 minute, which was longer than digested sludge.

• Bulletin of the Korean Chemical Society
• /
• 제33권2호
• /
• pp.670-674
• /
• 2012

The photovoltaic performance of solid-state dye-sensitized solar cells employing hole transport material (HTM), 2,2',7,7'-tetrakis-(N,N-di-p-methoxyphenyl-amine)-9,9'-spirobifluorene (spiro-MeOTAD), has been investigated in terms of HTM overlayer thickness. Two important parameters, soak time and spin-coating rate, are varied to control the HTM thickness. Decrease in the period of loading the spiro-MeOTAD solution on $TiO_2$ layer (soak time) leads to decrease in the HTM overlayer thickness, whereas decrease in spin-coating rate increases the HTM overlayer thickness. Photocurrent density and fill factor increase with decreasing the overlayer thickness, whereas open-circuit voltage remains almost unchanged. The improved photocurrent density is mainly ascribed to the enhanced charge transport rate, associated with the improved charge collection efficiency. Among the studied HTM overlayer thicknesses, ca. 230 nm-thick HTM overlayer demonstrates best efficiency of 4.5% at AM 1.5G one sun light intensity.

• 한국통신학회논문지
• /
• 제31권4B호
• /
• pp.255-269
• /
• 2006

The differentiated services(DiffServ) architecture provides packet level service differentiation through the simple and predefined Per-Hop Behaviors(PHBs). The Assured Forwarding(AF) PHB proposed as the assured services uses the RED-in/out(RIO) approach to ensusre the expected capacity specified by the service profile. However, the AF PHB fails to give good QoS and fairness to the TCP flows. This is because OUT(out- of-profile) packet droppings at the RIO buffer are unfair and sporadic during only network congestion while the TCP's congestion control algorithm works with a different round trip time(RTT). In this paper, we propose an Adaptive Regulating Drop(ARD) marker, as a novel dropping strategy at the ingressive edge router, to improve TCP fairness in assured services without a decrease in the link utilization. To drop packets pertinently, the ARD marker adaptively changes a Temporary Permitted Rate(TPR) for aggregate TCP flows. To reduce the excessive use of greedy TCP flows by notifying droppings of their IN packets constantly to them without a decrease in the link utilization, according to the TPR, the ARD marker performs random early fair remarking and dropping of their excessive IN packets at the aggregate flow level. Thus, the throughput of a TCP flow no more depends on only the sporadic and unfair OUT packet droppings at the RIO buffer in the core router. Then, the ARD marker regulates the packet transmission rate of each TCP flow to the contract rate by increasing TCP fairness, without a decrease in the link utilization.

• 성인간호학회지
• /
• 제21권4호
• /
• pp.435-445
• /
• 2009

Purpose: This study was to examine whether VRE infection control strategies have an effect on the decrease in incidence rates for VRE acquisition and VRE nosocomial infection in ICU. Methods: All the patients were examined for VRE carriers on ICU admission. Among them, patients hospitalized for over 48 hours were investigated for VRE acquisition rates and VRE nosocomial infection rate using VRE infection control strategies in ICU for the experimental group from September 2007 to April 2008. Before that, incidence of VRE acquisition and VRE nosocomial infection for the control group without Intervention were investigated from May to August 2007 retrospectively. Results: VRE acquisition rate in clinical specimens was 0.6% in the experimental group, that was significantly lower when compared to the control group. VRE carrier rate at admission to ICU was 15.4%. Out of 182 VRE carriers, 180 patients were identified by the active surveillance culture. Conclusion: These results suggested that active surveillance culture at admission was considered to be an essential measure for detection of VRE carrier. But without strict isolation and adherence rating after each intervention, hand washing and contact isolation alone did not significantly decrease VRE nosocomial infection, although it did significantly decrease incidence of VRE acquired from clinical specimen.

• 한국식품영양학회지
• /
• 제13권2호
• /
• pp.125-133
• /
• 2000

The purpose of this study was to investigate eating behavior, nutritional status and health condition of obese adult attending a weight control exercise. The subjects of this study consisted of 81 adult in some areas of Daegu. Their weight, height, triceps, midarm circumference were measured and their dietary intake and eating behavior were obtained by using questionnaires. Anthropometry was conducted to determine obesity. Average age of men and women were 38.1 and 35.2 years old respectively. Their intake of energy and protein were 69.5% and 97.4% of RDA respectively. Energy intake of normal and obese group was 74.4% and 64.9% of RDA respectively. Protein intake of normal and obese group was 99.7% and 95.3% of RDA respectively There was a negative correlation between PIBW and energy intake, PIBW and carbohydrate intake, BMI and energy intake, and BMI and carbohydrate intake. A relative magnitude of factors affecting weight decrease rate was analyzed by Stepwise multiple regression analysis. Overall results about relative influence of independent variables to dependent variable(weight decrease rate) indicated that the BMI(p<0.01) was the most significantly correlated with weight decrease rate in all subjects. The results of this study suggest that the extensive nutrition education in weight control program should be emphasized to prevent obesity early.

• 한국엔터테인먼트산업학회논문지
• /
• 제14권7호
• /
• pp.519-528
• /
• 2020

본 연구의 목적은 보행보조차 손잡이 높이에 따른 노인들의 상태불안과 심박수, 낙상효능감의 변화를 분석하는 데 있다. 연구대상은 정상노인 32명이다. 보행보조차는 유모차 형태로 손잡이 높이를 대상자들의 신장의 48%를 기준으로 설정하였으며, 손잡이 높이를 5%씩 감소시켜, 48, 43, 38 %로 구성하였다. 상태불안 평가는 한국판 상태불안 척도를 활용하였으며, 심박수 평가는 Fitbit Charge 2 손목형 심박수 측정기를 활용하였다. 낙삭효능감 평가는 한국판 낙상효능감 척도를 활용하였다. 그 결과, 보행보조차 손잡이 높이에 따라 상태불안과 심박수는 통계적으로 유의미한 증가가 나타났으며, 낙상효능감은 통계적으로 유의미한 감소가 나타났다. 사후검정 결과에서도 상태불안과 낙상효능감의 분석결과 각각의 보행보조차 손잡이 높이에 따라 통계적으로 유의미한 차이가 나타났으며, 심박수의 분석결과 48, 43%의 손잡이 높이와 38%의 손잡이 높이 간의 통계적으로 유의미한 차이가 나타났다. 따라서, 노인들의 보행보조차 사용시 상태불안과 심박수를 감소시키고 낙상효능감을 향상시키기 위해서, 보행손잡이 높이를 적절하게 위치하여야 할 것이며, 보행보조차 사용자 전체 신장의 48%의 위치로 조정하여야 할 것이다.