• 한국해양공학회지
• /
• 제34권6호
• /
• pp.419-427
• /
• 2020

In this study, a particle image velocimetry (PIV)-based pressure estimation method was investigated, with application to the wave-in-deck loading phenomenon. An experimental study was performed in a two-dimensional wave tank using a fixed deck structure under a focused wave, obtaining local pressures by pressure sensors, global loads by load cells, and instantaneous velocity fields using the PIV measurement technique. The PIV-based pressure estimation method was applied using the Euler equation as the governing equation, and the proper time step for the wave impact pressure was studied using the normalized root-mean-square deviation. The pressure estimation method showed good agreement for the local impact pressure in comparison with the measured pressure by the pressure sensors. However, some differences were observed in the peak pressure due to the limitations of the Euler equation and the sampling rate of the measurement system. Using the estimation method, the pressure fields during wave-in-deck loading were determined in the study, with an analysis of the mechanism of impact and negative pressure occurrence.

• 화약ㆍ발파
• /
• 제29권1호
• /
• pp.1-9
• /
• 2011

에어데크 공법은 노천광 및 대규모 발파현장에서 널리 쓰이는 대표적인 발파기술 중 하나이다. 에어데크 공법의 효율성 극대화를 위해 그간 많은 연구와 실험이 이루어졌으며, 공내에서 어떠한 압력 거동을 일으키는가를 규명하기 위한 노력들이 있었다. 본 연구에서는 다양한 에어데크 조건하에서 각 에어데크 구간이 어떠한 압력의 차이를 일으키는가에 대해 수치해석적으로 분석하였고, 에어데크의 위치와 에어데크 구간의 길이에 대한 압력변화를 알아보았다. 기본적으로 모든 수치해석은 JWL 상태방정식을 사용하였으며 2차원 평면상에서 진행 하였다. 순수한 압력의 변화만을 관찰하기 위해 암반의 밀도와 강도만을 달리하고 모든 암반은 균질한 상태로 가정하였다.

• 대한조선학회논문집
• /
• 제50권5호
• /
• pp.273-281
• /
• 2013

In this paper, the effects of bow deck shape on the green water are studied by numerical and experimental method. Varying the deck shapes to triangular, elliptic and circular, the thickness and advancing velocity of green water leading edge are compared using numerical method. Also the motion, the pressure on the vertical wall and the height on the deck of green water are compared among the three bow deck shapes in the heave and pitch motion free condition by experimental method. To remove the effects of the difference of motions among the deck shapes, numerical simulations are performed varying the deck shape with the same motion. In the same motion condition, smallest impulsive pressure occurred in the condition of elliptic deck shape.

• 대한조선학회논문집
• /
• 제56권4호
• /
• pp.343-351
• /
• 2019

Green water impact may sometimes cause some structure damages on ship's bow deck. Prediction of proper design pressure against the green water impact is an essential task to prevent the possible damages on bow deck. This paper presents a computational method of the bow deck's design pressure against the green water impact. Large heave and pitch motions of ship are calculated by the time domain nonlinear strip method. Green water flow and pressure on bow deck are simulated by the predictor-corrector second kind upstream finite difference method. This green water simulation method is based on the shallow water wave equations expanded for moving bottom conditions. For various kind of ships such as container ship, VLCC, oil tanker and bulk carrier, the green water design pressures on bow deck are computed and discussed. Also, the obtained results of design pressure on bow deck are compared with those of the classification society rules and discussed.

• Wind and Structures
• /
• 제4권5호
• /
• pp.399-412
• /
• 2001

Simultaneous pressure and force measurements have been conducted on a stationary box deck section model for two configurations (namely without and with New Jersey traffic barriers) at various angles of incidence. The mean and fluctuating aerodynamic coefficients and pressure coefficients were derived, together with their spectra and with the coherence functions between the pressures and the total aerodynamic forces. The mean aerodynamic coefficients derived from force measurements are first compared with those derived from the integration of the pressures on the deck surface. Correlation between forces and local pressures are determined in order to gain insight on the wind excitation mechanism. The influence of the angle of incidence on the pressure distribution and on the fluctuating forces is also analysed. It is evidenced how particular deck section areas are more responsible for the aerodynamic excitation of the deck.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 가을학술발표대회논문집
• /
• pp.225-226
• /
• 2023

This study examined the lateral deformation of double deck plate wall formworks against the lateral pressure of fresh concrete and then compared with the construction specification.

• 한국안전학회지
• /
• 제30권1호
• /
• pp.60-65
• /
• 2015

This study is to explore floor impact sound and sound insulation of reinforced concrete structure with void-deck slab system which combines polystyrene void foam and T-shaped steel deck plate. A void-deck slab system can effectively reduce the amount of concrete used and hence the mass of a reinforced concrete slab. Also void slab system has dynamically favorable for bending. Three-bay 2-story building was constructed as a mock up test specimen using void-deck slab system and floor impact sound was measured to valuate sound insulation performance. Light weight floor impact and heavy weight floor impact were investigated. Light weight floor impact pressure levels were 32dB, 28dB, and 29db at representative locations which are $1^{st}$ level in the floor impact sound insulation performance grading system. The heavy-weight floor impact pressure levels were 44dB, 45dB, and 43dB at representative locations which are $2^{nd}$ level in the floor impact sound insulation performance grading system. Therefore void-deck slab system can be used in public housing apartment building in terms of not only effectively reduced construction materials but also floor impact sound insulation.

• Journal of Advanced Research in Ocean Engineering
• /
• 제2권3호
• /
• pp.136-149
• /
• 2016

Green water impact occurs frequently on offshore platform due to waves with a height greater relative to the freeboard of the structure. This phenomenon exerts a large impact load on the deck. In this paper, offshore platform models with green water protectors of various shapes were fixed to the center of a 3D wave tank to measure the impact pressure acting on the various points on deck and protectors. The impact pressure distribution differed depending on the protector shape, and various patterns of wave creeping up the protector were observed. The protector shape that exerted the lowest pressure impact on the deck will be useful in the deck design of offshore platform, and the model test results will be expected to be used for designers to select the best protector form.

• 한국구조물진단유지관리공학회 논문집
• /
• 제25권6호
• /
• pp.60-67
• /
• 2021

최근 기존 재래식 거푸집 시스템의 다양한 문제를 해결하기 위하여, 데크플레이트를 거푸집으로 활용하는 방법이 개발되어 사용되고 있다. 이러한 데크플레이트 거푸집 시스템은 대부분 데크플레이트를 부재에 매립하여 영구 존치 시키는 방법으로 기존 거푸집 시스템에 비해 경제적이며 시공성이 높다. 그러나 매립형 데크플레이트 거푸집 시스템의 경우 폭이 좁고 철근 배근이 복잡한 보와 같은 부재에 대해서는 콘크리트의 충진을 확인하기 어렵고 데크플레이트의 부식 등 시공 및 유지관리 측면에서 다양한 문제점이 있음이 보고되고 있다. 이에 본 연구에서는 보 부재 제작 시 콘크리트 양생 후 데크플레이트를 제거할 수 있는 탈형 보-데크 거푸집 시스템을 개발하고자 하였다. 본 시스템은 거푸집 역할을 수행할 수 있는 데크플레이트 모듈과 콘크리트 측압에 의한 변형을 막아주는 프레임과 선 배근되는 철망 그리고 이를 결합하는 접합부로 구성되어 있다. 연구결과 개발 시스템의 경우 시공성이 우수하고 콘크리트의 측압에 의한 변형을 효율적으로 막아주며, 손쉽게 제거가 가능함을 확인하였다.

• 한국전산구조공학회논문집
• /
• 제33권3호
• /
• pp.187-192
• /
• 2020

덤프 트럭 데크의 경량화를 통한 연료 소비를 줄이고 에코 친화적인 설계를 위해서는 정확한 구조 분석이 필요하다. 지금까지 데크의 하중은 정수압 또는 토압 이론을 기반으로 계산되었다. 이 방법으로 데크의 하중 불균일을 계산할 수 없다. 하중 분포는 골재 입자의 크기 분포 및 상호 작용에 따라 달라진다. 이산요소법은 유한요소법보다 효과적으로 골재의 거동을 시뮬레이션할 수 있다. 본 논문에서는 벌크 밀도와 안식각을 측정하여 주요 특성을 얻었다. 15톤 덤프 트럭 데크는 범핑, 브레이킹 및 회전 시의 운동 조건을 적용하여 얻은 하중을 사용했다. 시뮬레이션은 이산요소해석 소프트웨어인 EDEM을 사용했다. 데크의 응력 및 변형 분포는 NASTRAN에 의해 계산되었다. 측정된 값과 비교하였고, 이를 통해 DEM 시뮬레이션의 결과는 수학적 가정에 의한 결과보다 정확함을 확인하였다.