• 한국수처리학회지
• /
• 제26권6호
• /
• pp.61-72
• /
• 2018

In this study, applicability of the decentralized water supply system were investigated by the high flux evaluation using ceramic membrane with combined pretreatment process. A) filtration process increased the transmembrane pressure of 1.4 kPa and 89.5 kPa on 2 and $5m^3/m^2{\cdot}d$ of filtration flux, respectively, the physical backwashing recovery rate were less than 28.6%. The (B) Coag./Floc. - Sedi. combined process with 4 mg / L of A-PAC showed that the transmembrane pressure increased to within 6 kPa, the physical backwashing recovery rate was over 37.9 % higher than (A) Filtration process. (C) Coag./Floc. combined process showed an increase of transmembrane pressure compared with (B) Coag./Floc. - Sedi. combined process, physical backwashing recovery rate was over 84%. As a result of the membrane fouling analysis using the resistance in series model, the combined pretreatment process showed that the cake resistance (Rc) was more than 92% at membrane filtration flux of $2m^3/m^2{\cdot}d$. In the (C) Coag./Floc. combined process, cake resistance(Rc) was over 86% on high flux conditions. The coagulation floc contained in influent was removed by the membrane, and the cake layer formed with the removed floc was identified as reversible fouling resistance which could be recovered by physical backwashing. The decentralized water supply system, which has the limitation of site area and installation space, is considered to could be operation of high flux of ceramic membrane by applying (C) Coag./Floc. combined process without sedimentation process.

• 한국물환경학회지
• /
• 제36권1호
• /
• pp.29-35
• /
• 2020

To manage the non-point source pollution and restore the water circulation, many technologies including infiltration or reservoir systems were installed in the urban area. These facilities have many problems regarding maintenance as their operation period becomes lengthier. The purpose of this study was to estimate the optimal maintenance timing through a long-term load test on the infiltration trench as one of the low impact development techniques. An infiltration trench was installed in the demonstration test facility, and stormwater was manufactured by Manual on installation and operation of non-point pollution management facilities from the Ministry of Environment, Korea and entered into the infiltration trench. Particle size distribution (PSD), suspended solids (SS) removal efficiency, and infiltration rate change tests were performed on inflow and outflow water. In case of the PSD, the maximum particulate size in the outflow decreased from 64 ㎛ to 33 ㎛ as the operating duration elapsed. The SS removal efficiency improved from 97 % to 99 %. The infiltration rate changed from 0.113 L/sec to 0.015 L/sec during the operation duration. The maintenance timing was determined based on the stormwater runoff requirements with these changes in water quality and infiltration rate. The methodologies in this study could be used to estimate the timing of maintenance of other low impact development techniques.

• Industrial Engineering and Management Systems
• /
• 제12권4호
• /
• pp.317-329
• /
• 2013

In recent years, for the purpose of solving the problem regarding environment protection and resource saving, certain measures and policies have been promoted to establish a green supply chains (GSC) with material flows from collection of used products to reuse of recycled parts in production of products. In this study, we propose an optimal operation of the GSC while considering the collection incentive of the used products and quality for recycling of used products. Two types of decision-making approaches are used for product quantity, collection incentive of used products and lower limit of quality level of reusable parts in the used products for recycling in the GSC. One is the decision-making under an independent policy in decentralized supply chains where a retailer and a manufacturer make decisions so as to maximize profits individually. The other is the decision-making under a cooperative policy in centralized supply chains where a retailer and a manufacturer make decisions cooperatively so as to maximize the whole system's profit. Additionally, we also discuss supply chain coordination as a manufacturer-retailer partnership based on profit sharing. Furthermore, we show the effect of the quality of the reusable parts on the optimal decisions. The collection incentive of the used products was found to bring more profitability to the GSC activity.

• Industrial Engineering and Management Systems
• /
• 제14권3호
• /
• pp.248-274
• /
• 2015

This study discusses a contract to promote collection and recycling of used products in a green supply chain (GSC). A collection incentive contract is combined with a reward-penalty contract. The collection incentive contract for used products is made between a retailer and a manufacturer. The reward-penalty contract for recycling used products is made between a manufacturer and an external institution. A retailer pays an incentive for collecting used products from customers and delivers them to a manufacturer with a product order quantity under uncertainty in product demand. A manufacturer remanufactures products using recyclable parts with acceptable quality levels and covers a part of the retailer's incentive from the recycled parts by sharing the reward from an external institution. Product demand information is assumed as (i) the distribution is known (ii) mean and variance are known. Besides, the optimal decisions for product quantity, collection incentive of used products and lower limit of quality level for recyclable parts under decentralized integrated GSCs. The analysis numerically investigates how (1) contract for recycling activity, (ii) product demand information and (iii) quality of recyclable parts affect the optimal operation for each GSC. Supply chain coordination to shift IGSC is discussed by adopting Nash Bargaining solution.

• 한국통신학회논문지
• /
• 제42권5호
• /
• pp.1093-1101
• /
• 2017

스마트 그리드를 구성하는 기본 단위 요소인 마이크로그리드(Microgrid)는 전력의 중앙 공급방식에서 벗어나 독립된 하나의 체계를 이룬다. 본 논문은 전력변환장치(Power Conditioning System)를 기반으로 마이크로그리드를 계통으로부터 전기적으로 독립시키고, 신재생 에너지원과 에너지 저장장치(Energy Storage System) 등의 분산자원(Distributed Energy Resource)을 활용하여 효과적으로 독립 상태를 유지하고 운영할 수 있는 방법을 제안한다. 계통의 위상검출과 동기화를 통해 계통에 연계하거나 독립 시에 부하에 미치는 영향을 최소화할 뿐만 아니라 계통의 정전 상황에서도 안정적으로 운영이 가능하다.

• Membrane and Water Treatment
• /
• 제7권1호
• /
• pp.11-22
• /
• 2016

The characterization of treatment performance with respect to mixed liquor suspended solids (MLSS) concentration enables greater control over system performance and contaminant removal efficiency. Hybrid membrane bioreactors (HMBRs) have yet to be well characterized in this regard, particularly in the context of greywater treatment. The aim of this study, therefore, was to determine the optimal MLSS concentration for a decentralized HMBR greywater reclamation system under typical loading conditions. Treatment performance was measured at MLSS concentrations ranging from 1000 to 4000 mg/L. The treated effluent was characterized in terms of biochemical oxygen demand ($BOD_5$), chemical oxygen demand (COD), turbidity, ammonia ($NH_3$), total phosphorus (TP), total kjeldahl nitrogen (TKN), and total nitrogen (TN). An MLSS concentration ranging from 3000 to 4000 mg/L yielded optimal results, with $BOD_5$, COD, turbidity, $NH_3$, TP, TKN, and TN removals reaching 99.2%, 97.8%, 99.8%, 99.9%, 97.9%, 95.1%, and 44.8%, respectively. The corresponding food-to-microorganism ratio during these trials was approximately 0.23 to 0.28. Operation at an MLSS concentration of 1000 mg/L resulted in an irrecoverable loss of floc, and contaminant residuals exceeded typical guideline values for reuse in non-potable water applications. Therefore, it is suggested that operation at or below this threshold be avoided.

• Journal of Communications and Networks
• /
• 제6권4호
• /
• pp.295-306
• /
• 2004

In this paper, a novel air-interface is presented for Fleet-Net1, a self-organizing network for inter-vehicle and vehicle-toroadsidecommunication. The air-interface is based upon the lowchip-rate version of UMTS/TDD. To adapt the cellular UMTS standard to an air-interface for ad hoc networks, changes of the physical layer, medium access control sub-layer and radio resource management are required. An overview of the required modifications is given here. Particularly, a decentralized synchronization mechanism is presented and analyzed by means of simulations. Furthermore, changes for the medium access control are explained in detail, which allow for an efficient operation in partly meshed networks and prioritization. Performance results of the overall system considering throughput and delay are derived by means of analytical evaluations and event-driven simulations. Based on realistic mobility models, it is shown that the presented solution provides a robust communication platform even in vehicular environments. The proposed air-interface is a cost-effective solution not only for inter-vehicle communication, but also for ad hoc networking in general, benefiting from the mass-market of UMTS.

• 디지털융복합연구
• /
• 제6권2호
• /
• pp.23-32
• /
• 2008

This paper tried to discuss response of local government facing governance era. Governance is intended to introduce a variety of residents' participating systems to revive the citizen's society and strengthen the foundation for that purpose, thus seeking the paradigm for decentralized operation of the nation. As widely accepted, governance has many meanings connected with controling method of interdependence activity. However bureaucracy do not make decisions as one-side and vertical like past but is form of public decisions that stakeholder in policy. Firstly, we reviewed the terms of governance and policy issues and policies on governance. And also survey on actual performer associated with governance in Gumi. Next, proposals of the development of policy in governance, role of local government are made in terms of construction of governance.

• 대한산업공학회지
• /
• 제41권4호
• /
• pp.330-337
• /
• 2015

A bucket-brigade is a way of transporting items where items are passed from one person to the next. The operation of the bucket brigade imitates the cooperative behavior of ants when brood, food or other resources are moved. Koo (2009) presented a bucket brigade-based assembly cell where each worker follows a simple rule: perform assembly operations on a product until the next worker downstream takes it over; then go back to the previous worker upstream to take over a new assembly job. In this way, the flow line is self-balanced without any predetermined job assignment. However, there are some productivity losses related to hand-off and blocking. This paper examines the hand-off and blocking losses and presents a new bucket brigade-based assembly cell where working areas for each assembler is restricted with the help of buffer interfaces. Simulation experiments are used to validate the performance of the new assembly system.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2006년 제4회 한국유체공학학술대회 논문집
• /
• pp.313-316
• /
• 2006

As Decentralized Generation(DG) becomes more reliable and economically feasible, it is expected that a higher application of DG units would be interconnected to the existing grids. This new market penetration of DG technologies is linked to a large number of factors like technologies costs and performances, interconnection issues, safety, market regulations, environmental issues or grid connection constrains. Korea Electric Power Corporation (KEPCO) has researched performance characteristics of the 60k W class 1) basic start-up & shutdown operation analysis 2) interconnection test 3) MGT -absorption chiller-heater system in the local condition. Variations of heat recovery from exhaust gas has measured according to micro gas turbine output of 15, 30, 45, 60kW. From those results, the performance of the MGT-absorption chiller/heater system has been evaluated. The suggested strategy and experience for the evaluation of the distributed generation will be used for the introduction of other distributed generation technologies into the grid in the future.