• 방사성폐기물학회지
• /
• 제17권3호
• /
• pp.313-319
• /
• 2019

A-KRS는 한국원자력연구원에서 개발한 파이로프로세싱 처리된 폐기물을 처분하는 개념이다. 고준위 방사성폐기물은 파이로프로세싱에 의하여 최소화되며, 최종 발생된 고준위 방사성폐기물은 모나자이트 세라믹 폐기물 형태로 제조된다. 모나자이트 세라믹 폐기물은 처분공에 영구 처분되어 열을 발생시킨다. 발생된 열은 폐기물을 보호하는 캐니스터 및 완충재의 온도를 상승시켜 설계 기준을 초과 시킬 수 있다. 온도는 처분공 간의 거리로 조절 가능하며 한국원자력연구원에서 해석한 바 있다. 한국원자력연구원에서 해석한 경계조건은 완벽 접촉을 가정한 것이기 때문에, 최초 처분 시에 발생하는 간격에 의해 발생하는 열 저항에 의한 온도 분포는 알 수 없다. 이를 보완하기 위하여, 본 논문에서는 최초 처분 시 존재하는 간격에 의한 열 전달 해석을 수행하였다. 또한 발열체와 캐니스터 간의 공극을 추가하여 온도 분포 해석을 수행하였다. COMSOL 전산해석 소프트웨어를 이용하여 열전달 해석을 수행하였다.

• 대한기계학회논문집B
• /
• 제20권12호
• /
• pp.4013-4026
• /
• 1996

A numerical simulation has been carried out for the jet impinging on a flat plate and a semi-circular concave surface. In this computation finite volume method was employed to solve the full Navier-Stokes equation based on a non-orthogonal coordinate with non staggered variable arrangement. The standard k-.epsilon. turbulent model and low Reynolds number k-.epsilon. model(Launder-Sharmar model) with Yap's correction were adapted. The accuracy of the numerical calculations were compared with various experimental data reported in the literature and showed good predictions of centerline velocity decay, wall pressure distribution and skin friction. For the jet impingement on a semi-circular concave surface, potential core length was calculated for two different nozzle(round edged nozzle and rectangular edged nozzle) to consider effects of the nozzle shape. The result showed that round edged nozzle had longer potential core length than rectangular edged nozzle for the same condition. Heat transfer rate along the concave surface with constant heat flux was calculated for various nozzle exit to surface distance(H/B) in the condition of same jet velocity. The maximum local Nusselt number at the stagnation point occurred at H/B = 8 where the centerline turbulent intensity had maximum value. The predicted Nusselt number showed good agreement with the experimental data at the stagnation point. However heat transfer predictions along the downstream were underestimated. This results suggest that the improved turbulence modeling is required.

• Nuclear Engineering and Technology
• /
• 제52권6호
• /
• pp.1252-1258
• /
• 2020

This study explores the ability of non-destructive assay techniques to detect a partial material defect in which 100 g of plutonium are diverted from the center of a 1000 g can of PuO₂ powder. Four safeguards measurements techniques: neutron multiplicity counting, calorimetry, gravimetry, and gamma ray spectroscopy are used in an attempt to detect the defect. Several materials are added to the partial defect PuO₂ can to replicate signatures of the diverted material. ²⁵²Cf is used to compensate for the doubles neutron counts, ²⁴¹Am is used to compensate for the decay heat, and aluminum is used to compensate for the weight. Although, the doubles and triples difference before and after diversion are statistically indistinguishable with the AWCC in fast and thermal mode, the difference in the singles counts are statistically detectable in both modes. The relatively short half-life of ²⁵²Cf leads to a decrease (three sigma uncertainty) in the doubles neutron counts after 161 days. Combining this with the precise quantity of ²⁴¹Am needed (10.7 g) to mimic the heat signature and the extreme precision in ²⁵²Cf mass needed to defeat neutron multiplicity measurements gives reassurance in the International Atomic Energy Agency's ability to detect partial material defects.

• 방사성폐기물학회지
• /
• 제2권1호
• /
• pp.13-22
• /
• 2004

This study presents the thermal analyses of a spent fuel dry storage cask under normal and off-normal conditions. The environmental temperature is assumed to be 15 $^{\circ}C$ under the normal condition. The off-normal condition has an environmental temperature of 38 $^{\circ}C$. An additional off-normal condition is considered as a partial blockage of the air inlet ducts. Two of the four air inlet ducts are assumed to be completely blocked. The significant thermal design feature of the storage cask is the air flow path used to remove the decay heat from the spent fuel. Natural circulation of the air inside the cask allows the concrete and fuel cladding temperatures to be maintained below the allowable values. The finite volume computational fluid dynamics code FLUENT was used for the thermal analysis. The maximum temperatures of the fuel rod and concrete overpack were lower than the allowable values under the normal and off-normal conditions.

• 한국식품위생안전성학회지
• /
• 제10권4호
• /
• pp.263-270
• /
• 1995

In order to promote the prevention of microbial and enzymatic spoilage and to retain the freshiness, sweet persimmons harvested in Gyeongsangnam-do were treated with graperfruit seed extract(GFSE)-CaCO3 mixture and stored in the proper packaging conditions. A low concentration of GFSE showed effective growth inhibition of plant pathological bacteria and fungi, Enterobacter pyrinus and Fusarium sp., which were involved in the decay of fruits and vegetables. GFSE was stable to heat treatment; its antimicrobial activity was not changed by heat treatment upto 10$0^{\circ}C$. However, when the temperature was raised to 12$0^{\circ}C$, about 90% of total activity was retained within 30 min. GFSE was also highly stable to broad pH changes; its activity was not changed in the range of pH 2.0 to pH 12.0. The physiological function of cell membrane in the spores of Bacillus cereus and the hyphae of Fusarium sp. was destroyed by treating with GFSE. It was observed that treating sweet persimmons with GFSE minxture and storing them in strech-wrapped packages could prolong the greshness of sweet persimmons and reduce quality deterioration.

• 설비공학논문집
• /
• 제14권11호
• /
• pp.914-922
• /
• 2002

Thermo-acoustic waves can be thermally generated in a compressible flow field by rapid heating and cooling, and chemical reaction near the boundary walls. This mechanism is very important in the space environment in which natural convection does not exist. Also this may be a significant factor for heat transfer when the fluids are close to the thermodynamic critical point. In this study, the generation and transmission characteristics of thermo-acoustic waves in an air-filled confined domain with two-step pulsed heating are studied numerically. The governing equations are discretized using control volume method, and are solved using PISO algorithm and second-order upwind scheme. For the purpose of stable solution, time step was set to the order of $1\times10_-9s,\;and\;grids\;are\;50\times2000$. Results show that temperature and pressure distributions of fluid near the boundary wall subjected to a rapid heating are increased abruptly, and the induced thermo-acoustic wave propagates through the fluid until it decays due to viscous and heat dissipation. Pressure waves have sharp front shape and decay with a long tail in the case of step heating, but these waves have sharp pin shape in the case of pulsed heating.

• 한국연초학회지
• /
• 제18권2호
• /
• pp.120-125
• /
• 1996

Dried tobacco leaf debris infected with tobacco mosaic virus (TMV) was subjected to heat treatment (6$0^{\circ}C$~10$0^{\circ}C$) with or without addition of moisture and to room temperature for natural decay to examine the periods of time required for the inactivation of PMV in the inoculum source. Wet conditions (60% moisture content of the debris) for heat treatment were more efficient than dry conditions to inactivate the virus at 7$0^{\circ}C$~10$0^{\circ}C$, and which decrease of temperature, the time needed for the viral inactivation increased greatly. At 6$0^{\circ}C$ and 7$0^{\circ}C$, the temperaturein a compost heap during the actively decomposing period, it takes about 15 days or more for the complete inactivation of the virus. However, considering the decrease of the viral infectivity during the decomposition, a shorter period of time will be required to inactivate TMV in the conditions mentioned above, suggesting that a well decomposed organic manure containing tobacco leaf debris may not have infective TMV and may not provide a potential inoculum source.

• 대한기계학회논문집B
• /
• 제28권11호
• /
• pp.1289-1301
• /
• 2004

Direct numerical simulation (DNS) of strongly-heated air flows moving upward in a vertical tube has been conducted to investigate the effect of gas property variations on turbulence modification. Three heating conditions(q$_1$$^{+}$=0.0045, 0.0035 and 0.0018) are selected to reflect the experiment of Shehata and McEligot (1998) at the inlet bulk Reynolds numbers of 4300 and 6000. At these conditions, the flow inside the heated tube remains turbululent or undergoes a transition to subturbulent or laminarizing flow. Consequently, a significant impairment of heat transfer occurs due to the reduction of flow turbulence. The predictions of integral parameters and mean profiles such as velocity and temperature distributions are in excellent agreement with the experiment. The computed turbulence data indicate that a reduction of flow turbulence occurs mainly due to strong flow acceleration effects for strongly-heated internal gas flows. Thus, buoyancy influences are secondary but not negligible especially for turbulent flow at low heating condition. Digital flow visualization also shows that vortical structures rapidly decay as the heating increases.s.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.352-353
• /
• 2007

The spectrum for $0_{\circ}$, $90_{\circ}$-polarized light coincides with the spectrum for non-polarized light and also with the spectrum was observed in the LB film deposited using a fresh solution. And, the formation and dissociation of J-aggregates, anisotropic behavior was no longer observed in the heat treated merocyanine dyes LB films. But, in the optical absorption spectra of same LB films by UV irradiation at room temperature, their were observed only dissociation of J-aggregates, that is decrease of absorbance peak without change spectral shape. On the other hand, in the case of optical absorption spectra of the LB films by the heat treatment at $70^{\circ}C$ in the air, both of the shifted absorption bands decay and a monomer absorption peak of about 530 nm appears instead.

• Nuclear Engineering and Technology
• /
• 제54권3호
• /
• pp.877-887
• /
• 2022

A new reactor concept is described that directly couples a supercritical CO₂ (sCO₂) power cycle with a CO₂-cooled, heavy water moderated pressure tube core. This configuration attains the simplification and economic potential of past direct-cycle sCO₂ concepts, while also providing safety and power density benefits by using the moderator as a heat sink for decay heat removal. A 200 MWe design is described that heavily leverages existing commercial nuclear technologies, including reactor and moderator systems from Canadian CANDU reactors and fuels and materials from UK Advanced Gas-cooled Reactors (AGRs). Descriptions are provided of the power cycle, nuclear island systems, reactor core, and safety systems, and the results of safety analyses are shown illustrating the ability of the design to withstand large-break loss of coolant accidents. The resulting design attains high efficiency while employing considerably fewer systems than current light water reactors and advanced reactor technologies, illustrating its economic promise. Prospects for the design are discussed, including the ability to demonstrate its technologies in a small (~20 MWe) initial system, and avenues for further improvement of the design using advanced technologies.