• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 하계학술발표대회 논문집
• /
• pp.725-730
• /
• 2008

In this study, we found out charged particle's deposition characteristic by experiments of $0.5{\mu}m$, $1.0{\mu}m$, $3.0{\mu}m$ size particle's concentration decay. We carried out the experiments on charged particle deposition onto the vertical cleanroom wall panel and some other fundamental experiments. The particle deposition mechanism is consist of sedimentation, convection, diffusion, thermophoresis, electrostatic and so on. Particle size determines mainly working deposition mechanism. The charged particle is made with corona discharge that are constituted field charging and diffusion charging. In addition, this combinational mechanism is called combined charging. The type of corona discharge determines quantity of particle electrical charge. In conclusion, we assumed that quantity of particle electrical charge accelerations deposition velocity onto the vertical cleanroom wall panel and proved it. And we figured out particle's deposition characteristic through compared between our experiment's results.

• 대한기계학회논문집B
• /
• 제29권3호
• /
• pp.322-329
• /
• 2005

The flow characteristics in the blade passage and in the wake region of a low speed axial flow fan have been investigated by experimental analysis using a rotating hot-wire sensor for design and off-design operating conditions. The results show that the tip leakage vortex is moved upstream when flow rate is decreased, thus disturbing the formation of wake flow near the rotor tip. The tip leakage vortex interfaces with blade pressure surface, and results in high velocity fluctuation near the pressure surface. From axial velocity distributions downstream of the fan rotor, large axial velocity decay near the rotor tip is observed at near stall condition, which results in large blockage compared to that at the design condition. Although the wake flow downstream of the rotor blade is clearly measured at all operating conditions, the trough of the high velocity fluctuation due to Karmann vortex street in the wake flow is mainly observed at a higher flow condition than the design flow rate.

• 대한전자공학회논문지TC
• /
• 제44권6호
• /
• pp.57-63
• /
• 2007

본 논문에서는 모노 펄스 추적용 배열안테나에서 주로 사용하는 선전원에 의한 차패턴 합성법을 새로이 제안한다. 제안한 방법에서는 잘 알려진 Bayliss의 차패턴 합성법과는 달리 Taylor의 선전원 합패턴 공식을 적절히 수정하여, 원하는 개별 sidelobe 레벨을 갖는 차패턴을 최적 합성한다. 즉, 차패턴과 해당 소스 분포함수와의 관계를 해석적으로 설정하고, 패턴이 갖는 null점을 최적으로 섭동시킴으로써 원하는 패턴과 해당 소스 분포함수를 동시에 도출한다. 더욱이 이 방법은 기존의 방법보다 빠른 sidelobe 감쇠율을 가지도록 한다. 수치적인 결과들로부터 제안한 합성과정의 타당성과 유용성을 보인다.

• Applied Science and Convergence Technology
• /
• 제26권6호
• /
• pp.201-207
• /
• 2017

An electron-excited temperature ($T_{ex}$) is not determined by the Boltzmann plots only with the spectral data of $4p{\rightarrow}4s$ in an Ar-plasma jet operated with a low frequency of several tens of kHz and the low voltage of a few kV, while $T_{ex}$ can be obtained at least with the presence of a high energy-level transition ($5p{\rightarrow}4s$) in the high-voltage operation of 8 kV. The optical intensities of most spectra that are measured according to the voltage and the measuring position of the plasma column increase or decay exponentially at the same rate as that of the intensity variation; therefore, the excitation temperature is estimated by comparing the relative optical-intensity to that of a high voltage. In the low-voltage range of an Ar-jet operation, the electron-excitation temperature is estimated as being from 0.61 eV to 0.67 eV, and the corresponding radical density of the Ar-4p state is in the order of $10^{10}{\sim}10^{11}cm^{-3}$. The variation of the excitation temperature is almost linear in relation to the operation voltage and the position of the plasma plume, meaning that the variation rates of the electron-excitation temperature are 0.03 eV/kV for the voltage and 0.075 eV/cm along the plasma plume.

• 반도체디스플레이기술학회지
• /
• 제18권4호
• /
• pp.134-137
• /
• 2019

In this paper, the data retention characteristics were analyzed to find out the thickness effect on the trap energy distribution of silicon nitride in the silicon-oxide-nitride-oxide-silicon (SONOS) flash memory devices. The nitride films were prepared by low pressure chemical vapor deposition (LPCVD). The flat band voltage shift in the programmed device was measured at the elevated temperatures to observe the thermal excitation of electrons from the nitride traps in the retention mode. The trap energy distribution was extracted using the charge decay rates and the experimental results show that the portion of the shallow interface trap in the total nitride trap amount including interface and bulk trap increases as the nitride thickness decreases.

• Earthquakes and Structures
• /
• 제16권2호
• /
• pp.209-219
• /
• 2019

Unbonded Post-Tensioned (UPT) precast concrete systems have been shown to provide excellent seismic resistance. In order to improve understanding of the dynamic response of UPT systems, a series of snap back tests on four UPT systems was undertaken consisting of one Single Rocking Wall (SRW) and three Precast Wall with End Columns (PreWEC) systems. The snap back tests provided both a static pushover and a nonlinear free vibration response of a system. As expected the SRW exhibited an approximate bi-linear inertia force-drift response during the free vibration decay and the PreWEC walls showed an inertia force-drift response with increased strength and energy dissipation due to the addition of steel O-connectors. All walls exhibited negligible residual drifts regardless of the number of O-connectors or the post-tensioning force. When PreWEC systems of the same strength were compared the inclusion of further energy dissipating O-connectors was found to decrease the measured peak wall acceleration. Both the local and global wall parameters measured at pseudo-static and dynamic loading rates showed similar behaviour, which demonstrates that the dynamic behaviour of UPT walls is well represented by pseudo-static tests. The SRW was found to have Equivalent Viscous Damping (EVD) between 0.9-3.8% and the three PreWEC walls were found to have maximum EVD of between 14.7-25.8%.

• 한국수소및신에너지학회논문집
• /
• 제26권2호
• /
• pp.96-104
• /
• 2015

Reactivity of commercial WGS catalyst and four new catalysts(RMC-3, PC-73, PC-67SU, PC-59) manufactured with various compositions by Korea Electric Power Research Institute(KEPCO RI) were compared to select suitable WGS catalyst for SEWGS system. Steam/CO ratio, gas velocity, flow rates of syngas, and temperature were considered as operating variables. As a result, commercial catalyst showed the highest CO conversion and RMC-3 catalyst showed also high CO conversion. Therefore, commercial and RMC-3 catalysts were selected as applicable catalysts. However, PC-73 catalyst showed low CO conversion at low temperature($200^{\circ}C$) but showed good reactivity at high temperature($225{\sim}250^{\circ}C$), and therefore, PC-73 catalyst was selected as applicable catalyst for high temperature operation. Continuous operations up to 24 hours for those three catalysts(commercial, RMC-3, PC-73) were conducted to check reactivity decay of catalysts. All three catalysts maintained their original reactivity.

• 한국식품저장유통학회지
• /
• 제30권4호
• /
• pp.562-572
• /
• 2023

In this study, we aimed to evaluate the quality of Aralia elata shoots according to different packaging methods during storage at 2℃. The highest level of dehydration and wilting incidences were observed in polypropylene containers with polyvinyl chloride wrap (PP+PVC), and these levels continually increased during the entire storage period, compared to other packaging methods. The overall marketability of A. elata shoot packaged in polyethylene terephthalate container (PET) and PP with the mineral-coted functional warp (PP+F) constantly declined during storage with a similar level of 38.6 and 36.0% at 15 days in storage, respectively. PP with PET cover packaging (PP+PET) showed the lowest decay and wilting rates during the entire storage, and the wilting score at 10th day was 51.9, 58.0, 51.8% suppressed, as compared to PET, PP+PVC, and PP+F, respectively. Consequently PP+PET packaging effectively decreased the deterioration of A. elata and maintained marketability for 10 days of storage at 2℃.

• 한국산림과학회지
• /
• 제105권1호
• /
• pp.93-102
• /
• 2016

본 연구는 우리나라 밤 주요재배 품종을 대상으로 저장온도($4^{\circ}C$, $-1^{\circ}C$) 및 품종에 따른 밤 과실의 저장 중 품질변화를 분석하였다. 저장기간(16주) 동안 밤 과실의 외피색, 경도, 당도, 부패율, 관능평가 등을 조사하여 품질변화 양상을 비교하였다. 저장기간 동안 외피색의 변화는 '축파(Tsukuba)'와 '석추(Ishizuchi)'가 적었던 반면 '이평(Riheiguri)'과 '대보(Daebo)'에서는 유의적으로 크게 나타났다. 저장 온도에 따른 밤 품종들의 외피색의 변화는 $4^{\circ}C$ 처리구보다 $-1^{\circ}C$ 처리구에서 적게 나타났다. 저장온도 $-1^{\circ}C$에서 품종에 따른 경도를 비교시 '유마(Arima)'와 '단택(Tanzawa)' 품종은 감소하는 경향을 보였고 가장 낮게 나타났다. 저장온도에 따른 밤 품종들의 경도를 비교하면 $4^{\circ}C$에 보관한 밤들의 경도가 $-1^{\circ}C$에 보관한 밤에서 보다 높게 나타났다. 저장기간 동안 당도가 가장 많이 증가한 품종은 '이평(Riheiguri)'이었고, '유마(Arima)'는 가장 적게 증가하였다. 저장기간 동안 당도는 저장온도 $4^{\circ}C$와 $-1^{\circ}C$ 모두 처리구에서 증가하였고, 저장온도 $-1^{\circ}C$처리구에서 더 많이 증가하였다. 부패율은 저장온도 $4^{\circ}C$ 처리구보다 $-1^{\circ}C$ 처리구에서 더 낮았으며, '석추(Ishizuchi)'와 '이평(Riheiguri)'의 부패율이 높았으나, '대보(Daebo)', '옥광(Okkwang)', '단택(Tanzawa)'은 낮게 나타났다. 관능평가의 경우, 식감과 단맛을 조사한 결과, '이평(Riheiguri)', '대보(Daebo)', '축파(Tsukuba)'는 단단한 식감과 강한 단맛을 나타낸 반면, '단택(Tanzawa)'은 다른 품종에 비해 상대적으로 식감이 물렀다. 저장기간 동안 '유마(Arima)'와 '옥광(Okkwang)'은 약한 단맛을 나타냈다. 식감은 저장온도 $4^{\circ}C$의 과실이 더 단단했으며, 단맛은 저장온도 $-1^{\circ}C$의 과실에서 더 높았다. 저장온도 $4^{\circ}C$에 저장한 밤의 식감이 우수하고 단단하여 $4^{\circ}C$는 1개월 이내 단기저장에 좋은 온도인 것으로 보이며, 4개월 이상 장기저장 시에는 $-1^{\circ}C$가 적합할 것으로 판단된다. 본 연구 결과는 우리나라 밤 주요재배 품종의 수확 후 관리에 대한 기초자료를 제시하고 고부가가치 향상 및 임업 소득 증대에 기여될 것으로 전망된다.

• 생물환경조절학회지
• /
• 제26권1호
• /
• pp.19-26
• /
• 2017

본 연구에서는 동양배 '진황'의 1-MCP처리 후 유통온도에 따른 과실의 품질 변화를 관찰하였다. 과실의 감모율의 경우 저장온도가 낮을수록 적었으며 1-MCP처리구가 무처리구 보다 유의하게 적은 감모를 보였다. 수확 후 1-MCP처리는 과육경도에서 유통온도(18, 25 및 $30^{\circ}C$)와 관계없이 20N이상으로 무처리구보다 높게 유지되었다. 과피색의 변화는 모든 처리구에서 저장기간이 길어질수록 어두워졌으며, $a^*$값은 18 및 $25^{\circ}C$에서는 처리구간 차이를 보이지 않았지만, $30^{\circ}C$에서는 1-MCP처리구가 유의하게 적은 변화를 보였다. 과실의 생리장해에서 과심갈변, 분질과 발생은 저장온도가 낮을수록 발생이 적었으며, 1-MCP 처리구가 무처리구 보다 낮은 발생을 보였다. '진황'과실에서 1-MCP처리후 유통온도에 따른 과실의 품위유지 기간은 18 및 $25^{\circ}C$에서는 28일 내외이며, $30^{\circ}C$에서는 21일 내외로 1-MCP 처리로 유통기간을 약 7일 이상의 품위유지에 효과를 보였다. 이러한 결과는 특히 고온의 시장조건에서는 조생종 '진황' 과실에 1-MCP처리가 품위유지에 효과적인 것으로 사료된다.