• 제목/요약/키워드: Decay Length

검색결과 101건 처리시간 0.028초

자장감쇠법을 이용한 $(Bi,Pb)_2Sr_2Ca_2Cu_3O_x$/Ag 초전도선재의 접합저항 측정 (Measurement of Joint Resistance of $(Bi,Pb)_2Sr_2Ca_2Cu_3O_x$/Ag Superconducting Tape by Field decay Technique)

  • 김정호;이승묵;주진호
    • Progress in Superconductivity
    • /
    • 제14권1호
    • /
    • pp.1-10
    • /
    • 2012
  • We fabricated a closed coils by using resistive-joint method and the joint resistance of the coils were estimated by field decay technique in liquid nitrogen. We used the Runge-kutta method for the numerical analysis to calculate the decay properties. The closed coil was wound by $(Bi,Pb)_2Sr_2Ca_2Cu_3O_x$/Ag tape. Both ends the tape were overlapped and soldered to each other. The current was induced in a closed coils by external magnetic flux density. Its decay characteristic was observed by means of measuring the magnetic flux density generated by induced current at the center of the closed coil with hall sensor. The joint resistance was calculated as the ratio of the inductance of the loop to the time constants. The joint resistances were evaluated as a function of critical current of loop, contact length, sweep time, and external magnetic flux density in a contact length of 7 cm. It was observed that joint resistance was dependent on contact length of a closed coil, but independent of critical current, sweep time, and external magnetic flux density. The joint resistance was measured to be higher for a standard four-probe method, compared with that for the field decay technique. This implies that noise of measurement in a standard four-probe method is larger than that of field decay technique. It was estimated that joint resistance was $8.0{\times}10^{-9}{\Omega}$ to $11.4{\times}10^{-9}{\Omega}$ for coils of contact length for 7 cm. It was found that 40Pb/60Sn solder are unsuitable for persistent mode.

A Nuclide Decay Chain Transport Model by the Method of Characteristics

  • Lee, Youn-Myoung;Kang, Chul-Hyung;Hahn, Pil-Soo;Chun, Kwan-Sik
    • Nuclear Engineering and Technology
    • /
    • 제29권4호
    • /
    • pp.320-326
    • /
    • 1997
  • The nuclide transport in the one-dimensional porous medium is considered as a first step in developing a decay chain transport in multidimensional inhomogeneous media. A method of solving conventional advection-dispersion equation with decay chain of arbitrary length by using the method of characteristics (MOC) is introduced. In specific cases where the advection are dominant rather than dispersion, the method is known to be useful : one of the most distinctive advantages in applying the model is that the MU minimizes the numerical dispersion, which is distinguished in such common numerical schemes as finite element method and finite difference method. The suggested model is considered to be effective through several illustrations for the case that decay chain of arbitrary length is involved during transport which is difficult to solve by standard numerical solutions if the medium becomes more complicated.

  • PDF

가입자 통신 선로에서의 뇌격 파라미터 분석과 측정 (Analysis and Measurement of Lightning Parameters on Subscriber Telecommunication Lines)

  • 오호석;박동철
    • 한국전자파학회논문지
    • /
    • 제18권11호
    • /
    • pp.1309-1317
    • /
    • 2007
  • 본 논문은 낙뢰에 의해 전송 선로에 유기되는 유도뢰 전압을 해석하고 낙뢰 위치 및 선로 길이에 따른 유도뢰 전압의 크기, 파두장, 파미장 등에 대한 낙뢰 파라미터 변화를 분석하였다. 분석한 결과를 확인하기 위해 실제 통신 선로를 대상으로 유도뢰 전압을 측정하였다. 선로 길이가 길어짐에 따라 그리고 낙뢰 위치가 선로와 멀어짐에 따라 파두장, 파미장이 증가하는 경향을 확인하였다. 전체 선로 길이보다는 가공 선로 길이가 상대적으로 유도 전압 크기에 영향을 끼침을 확인하였다.

이차원 무한요소 형성에 관한 연구 (Study on the Formulation of Two Dimensional Infinite Elements)

  • 신용태;임장근
    • 대한기계학회논문집
    • /
    • 제17권5호
    • /
    • pp.1066-1073
    • /
    • 1993
  • Using regular finite elements and infinite elements simultaneously, elastic boundary value problems with infinite domain can be analyzed more effectively and accurately. In this paper, two dimensional infinite elements have been formulated by means of applying the derived mapping function to the coordinates and multiplying the regular displacement shape functions by a decay function. Orders(m, n) of the mapping and decay functions are found for the purpose of obtaining the convergent solutions without respect to the various decay lengthes. As a result of numerical tests for an infinite plate with a hole under internal pressure, two sets of function orders are obtained as follows. (a) n=0, m=1.5 (b) n=m=0.65

지수감쇠 기법을 이용한 반사경 손실측정 시스템의 오차특성 연구 (Study of the error chsracteristics in a mirror loss measurement system using an exqonential decay metod)

  • 조민식
    • 한국광학회지
    • /
    • 제12권2호
    • /
    • pp.77-82
    • /
    • 2001
  • 손실 200 ppm급과 30 ppm급인 두 종류의 시험 반사경을 대상으로, 지수감쇠 방법을 이용한 반사경 손실측정 시스템의 오차 특성이 조사되었다. 공진기 길이 떨림에 의한 공진기 감쇠신호의 지수함수 왜곡을 보상하기 위하여 감쇠신호 데이터 평균기법을 적용하였다. 감쇠신호 6개의 평균이 취해졌을 때 감쇠신호의 지수함수 곡선맞춤 오차개선이 뚜력시 관측되었으며 손실 200ppm급 시험 반사경의 경우 약 2.4배 손실 30ppm급 시험 반사경의 경우 약 1.3배의 반사경 손실 측정오차 개선효과를 얻을 수 있었다 시험 공진기에서의 일별(day-to-day) 반사경 손실측정 반복도 오차가 조사되었다. 손실 200ppm급 시험 반사경의 경우 약 5.0%, 30ppm급 시험 반사경의 경우 약 26.4%의 손실측정 반복도 오차가 관측되었다. 저손실 반사경 평가에서 확인된 낮은 감쇠신호 데이터 평균효과와 높은 손실측정 반복도 오차는 손실측정 시스템 자체의 측정오차 이외에 시험 반사경 표면의 불균일한 손실 공간분포와 주변 오염원 유입의 결과로 분석되었다 또한 공진기 길이 떨림의 크기와 공진기 길이 측정오차가 손실측정 시스템의 정확도에 미치는 영향을 계산을 통해 조사한 결과, 분해능 수 ppm 급 현재의 측정 시스템의 성능에 미칠수 있는 공진기 길이오차의 영향은 충분히 적은 것으로 확인되었다.

  • PDF

Effects of decay heat and cooling condition on the reactor pool natural circulation under RVACS operation in a water 2-D slab model

  • Min Ho Lee ;Dong Wook Jerng ;In Cheol Bang
    • Nuclear Engineering and Technology
    • /
    • 제55권5호
    • /
    • pp.1821-1829
    • /
    • 2023
  • The temperature distribution of the reactor pool under natural circulation induced by the RVACS operation was experimentally studied. According to the Bo' based similarity law, which could reproduce the temperature distribution of the working fluid under natural circulation, SINCRO-2D facility was designed based on the PGSFR. It was reduced to 1 : 25 in length scale, having water as a simulant of the sodium, which is the original working fluid. In general, temperature was stratified, however, effect of the natural circulation flow could be observed by the entrainment of the stratified temperature. Relative cooling contribution of the upper plenum (narrow gap) and lower plenum was approximately 0.2 and 0.8, respectively. In the range of decay heat from 0.2% to 1.0%, only the magnitude of the temperature was changed, while the normalized temperature maintained. Boundary temperature distribution change made a global temperature offset of the pool, without a significant local change. Therefore, the decay heat and cooling boundary condition had no significant effect on temperature distribution characteristics of the pool within the given range of the decay heat and boundary temperature distribution.

Effect of PGRs and various co-packing materials on storage quality in 'Shine Muscat' grapes

  • Kim, Sung-Joo;Kim, Yu-Rim;Choi, Cheol;Ahn, Young-Jik;Choi, Hyun-Jin;Chun, Jong-Pil
    • 농업과학연구
    • /
    • 제48권2호
    • /
    • pp.241-250
    • /
    • 2021
  • This investigation assessed the berry quality after two months of low-temperature storage (3 ± 1℃) of 'Shine Muscat' grapes, which were treated with CPPU (N-[2-chloro-4-pyridyl]-N'-phenylurea) or TDZ (1-phenyl-3-[1,2,3-thiadiazol-5-yl] urea) in combination with gibbrellic acid (GA3). The berry shatter rate was the lowest (1%) in 4 cm + CPPU treatment, while it was the highest (2.4%) in 3 cm floral length treated with CPPU. On the other hand, the 4 cm + TDZ treatment resulted in a shatter rate of 2.0%, which was twice as high as that observed after 4 cm + CPPU treatment. The 4 cm + TDZ treatment resulted in a 5.5% berry decay rate, which was the highest among all treatments. Alternatives to using a sulfur dioxide (SD) pad to maintain the quality of 'Shine Muscat' grapes, namely, using ethylene scrubbers (ESs, 3 g × 2 sachet) and alcohol releasers (ARs, 2 g × 2 sachet) in a 2 kg carton package for export, were explored in this study. The berry shatter rate with ES treatment (1.0%) was found to be comparable to that with SD treatment (0.6%) during three months of cold storage. Regarding the berry decay rate, that of the untreated control surged to 36.0% in the three months of storage, followed by 19.9% and 15.5% in samples subjected to AR and ES treatments respectively. Compared with the untreated control, the samples subjected to SD treatment showed a decay rate of 2.2%, which was the most effective in reducing berry decay by 95%. These results demonstrated that SD pad treatment of 'Shine Muscat' grapes was the most effective method of maintaining berry quality, and ES treatment partially reduced the berry shatter and berry decay rates.

어선 부가물 별 자유 횡 동요 감쇠 및 저항성능에 관한 연구 (Study on the Free Roll Decay and Resistance Performances of Fishing Vessels by Varying Appendages)

  • 윤미진;서장훈;박동우;이찬재;김인태;남동
    • 해양환경안전학회지
    • /
    • 제29권6호
    • /
    • pp.688-696
    • /
    • 2023
  • 본 연구에서는 어선의 운동성능을 향상하기 위해 부착되는 부가물의 조합과 파라미터 변경에 따른 어선의 자유 횡 동요 감쇠와 저항 성능을 평가하였다. 성능 평가를 위해 전산유체역학(Computational Fluid Dynamics)을 이용한 수치해석을 수행하였으며, 주요 부가물인 빌지킬과 선저킬의 조합과 치수 변경에 따른 횡 동요 주기와 감쇠 계수의 변화를 확인하였다. 선저킬의 경우 길이가 변화함에 따른 횡 동요 감쇠 계수의 변화가 상대적으로 크지 않음을 확인하였다. 반면 빌지킬의 경우 길이와 각도의 증가에 따라서 횡 동요 감쇠 계수가 증가함을 확인하였다. 4가지 부가물 조합 조건과 나선의 저항 성능을 비교하였으며, 부가물에 의한 어선의 자세와 압력분포의 변화로 인해 저항이 증가함을 확인하였다. 본 연구 결과를 통해 부가물 크기와 배치가 어선의 운동 및 저항 성능에 미치는 영향을 확인할 수 있었으며, 어선 적용 시에 도움이 될 수 있을 것으로 기대한다.

Comparison of the change in quality indices during distribution period by import season in three grape cultivars

  • Kim, Sung-Joo;Noh, Soo-In;Lim, Byung-Sun;Chun, Jong-Pil
    • 농업과학연구
    • /
    • 제46권1호
    • /
    • pp.45-56
    • /
    • 2019
  • As a result of analyzing the quality of imported grapes during the 2018 season, the hardness of the grape berry was found to be 10 N or less in total. In the case of Chilean grapes, the soluble solids tended to be lower as imports and distribution periods were delayed. The berry weight was the largest at 14.4 - 14.8 g for the 'Red Globe', 7.1 - 7.4 g for the 'Thompson Seedless' and 6.0 - 7.0 g for the 'Crimson Seedless'. The 'Crimson Seedless' grapes imported from Chile, which had a high berry shatter rate, had a shorter pedicel length, pad width and brush length than that of the other 2 varieties. Regardless of the grape varieties, the weight loss during the distribution at room temperature ($25^{\circ}C$) increased rapidly as the import season was delayed. Additionally, it was found that the later the distribution seasons, a higher stem browning index was observed regardless of the variety. The 'Thompson Seedless' was revealed to be more susceptible to browning than that of the other varieties. The shrinkage of the stem and the pedicel browning progressed within a short time during shelf-life as the distribution time was delayed. The incidence of berry decay of the imported grapes tended to increase with the progression of the distribution period. In the fruits distributed on April, except for the 'Crimson Seedless', the grapes were rapidly corrupted in the second half of the distribution. The 'Red Globe' grapes completely lost marketability due to a berry decay of 26.1% and 69.9% at 9 and 12 days after shelf-life, respectively.

균열 암반 매질에서의 핵종의 붕괴사슬 이동을 위한 연속시간 마코프 프로세스 모델 (Continuous Time Markov Process Model for Nuclide Decay Chain Transport in the Fractured Rock Medium)

  • 이연명;강철형;한필수;박헌휘;이건재
    • Nuclear Engineering and Technology
    • /
    • 제25권4호
    • /
    • pp.539-547
    • /
    • 1993
  • 이전에 제시한 모델 1-3을 다시 확장하여 균열 암반에서의 일차원적 핵종이동에 관한 추계적인 모델을 제시하였다. 이 모델은 처분장 근처의 암반내의 균열을 통한 무한 길이를 갖는 핵종의 붕괴 사슬에 의한 이동을 연속시간 마코프 프로세스를 이용하여 모사한다. 이전의 결정론적 해석해에 의한 모델들이 균일한 다공성매질과 같은 단순성을 요구하고 핵종의 붕괴사슬의 수를 제한하며 균열암반매질내에서의 이동의 경우에는 균열에서 암반으로의 확산등이 고려되지 않거나 그 해의 형태가 복잡하다. 또다른 결정론적인 해를 제시하는 수치모델의 경우에도 해를 얻기 위한 과정이 상당히 복잡하고 정확한 해를 제공하지는 못한다. 이에 반해 이 모델은 매질에서의 핵종의 농도에 관한 기대값과 그 분산으로서 비교적 용이하게 해를 제시한다. 모델을 검증하고 그 효율성가 정착성을 예시하기 위하여 암반으로의 확산이 무시된 단순화된 매질에 대하여 3개의 붕괴 사슬을 갖는 가상의 핵종에 대하여 이동거리와 시간에 대한 농도에 대하여 정확한 해석해와의 비교가 행하여 졌다. 매질을 나눈 구획의 수에 종속 하는 수치분산을 보정하여 계산된 결과에서 이 모델이 해석해와 잘 일치하는 것을 알 수 있었다.

  • PDF