• 전기학회논문지
• /
• 제62권12호
• /
• pp.1798-1802
• /
• 2013

We present a technique for measuring low resistance ranges of a decade resistor with a 4-Terminal connection. With the technique the accuracy of 0.8 % was obtained for a 1 $m{\Omega}$ resistance of the decade resistor. We suggested a proper pattern 4-Terminal measurement results with several 4-Terminal pattern and adapters. Additionally, we should that precise measurements for low resistance can be made usung a digital multimeter(DMM) only.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제54권11호
• /
• pp.503-507
• /
• 2005

Both ratio error and phase angle error in voltage transformer(VT) depend on values of VT burden used. Thus, precise measurement of burden is very important for the evaluation of VT. A method of evaluation for VT burden has been developed by employing the portable decade resistor, with AC-DC resistance difference less than 10-3. The burden value(value and power factor) can be obtained by conductance and susceptance, obtained by measuring the change of ratio error and phase angle error caused by the resistance change of decade resistor. The burden value and power factor obtained by the method are consistent with those obtained using power analyzer within corresponding uncertainties.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제55권8호
• /
• pp.403-407
• /
• 2006

Standard capacitors, as like as Hamon resistor standards, of series connection/parallel connection ratio $10{\mu}F/1000{\mu}F\;and\;100{\mu}F/10000{\mu}F$ were fabricated for calibration of impedance bridges or analyzers with measuring ranges up to 1 F. The calculated correction terms to the ratio of one measured value in series connection to the value in parallel connection were evaluated to be $1.92{\times}10^{-7}$. These capacitors were designed to be used not only as 100:1 capacitance standards but also as single capacitors or decade capacitors with decade values at frequencies up to 1 kHz.

• 전기학회논문지
• /
• 제56권7호
• /
• pp.1268-1274
• /
• 2007

A recently developed methods for the on-site calibration of the voltage transformer (VT) comparator system have been reviewed in the paper. The method utilizes the several traveling standards consisting of the VT, the non-reactive standard resistors, the wide ratio error VT, and the decade resistors. The VT is used for the absolute evaluation of a standard VT belonging to the industry. The non-reactive standard resistor and wide ratio error VT are used for the linearity check of errors in the voltage comparator of the industry. The decade resistors are used for evaluation of a VT burden of the industry.

• ETRI Journal
• /
• 제31권5호
• /
• pp.576-584
• /
• 2009

A novel tunable transconductor is presented. Input transistors operate in the triode region to achieve programmable voltage-to-current conversion. These transistors are kept in the triode region by a novel negative feedback loop which features simplicity, low voltage requirements, and high output resistance. A linearity analysis is carried out which demonstrates how the proposed transconductance tuning scheme leads to high linearity in a wide transconductance range. Measurement results for a 0.5 ${\mu}m$ CMOS implementation of the transconductor show a transconductance tuning range of more than a decade (15 ${\mu}A/V$ to 165 ${\mu}A/V$) and a total harmonic distortion of -67 dB at 1 MHz for an input of 1 Vpp and a supply voltage of 1.8 V.

• 전자공학회논문지SC
• /
• 제37권1호
• /
• pp.40-48
• /
• 2000

저전압 저전력 신호 처리를 위한 새로운 바이폴라 선형 트랜스컨덕터와 이것을 이용한 연산 트랜스컨덕턴스 증폭기를 제안한다. 이 트랜스컨덕터는 이미터 디제네레이션 저항을 갖는 npn 차동쌍과 이 차동쌍에 직렬로 연결된 pnp 차동쌍으로 구성된다. 이 구성에서 넓은 선형성과 온도 안정성을 위해 pnp 차동쌍의 바이어스 전류는 npn 차동쌍의 출력 전류를 사용하고 있다. 제안한 OTA는 선형 트랜스컨덕터와 세 개의 전류 미러를 갖는 트랜스리니어 전류 셀로 구성된다. 제안된 트랜스컨덕터는 종래의 그것과 비교하였을 때 우수한 선형성과 저전압 저전력 특성을 갖는다. 실험 결과, 50 ${\mu}S$의 트랜스컨덕턴스를 갖는 트랜스컨덕턴스가 공급 전압 ${\pm}$3V에서 입력 전압 범위가 -2V에서 +2V 사이에 ${\pm}$0.06% 보다 작은 선형 오차를 갖는다. 전력 소비는 2.44 mW이다. 25 ${\mu}S$의 트랜스컨덕턴스를 갖는 OTA 시작품을 바이폴라 트렌지스터 어레이를 가지고 만들었다. OTA의 선형성은 제안한 트랜스컨덕터와 같다. OTA 회로는 또한 0.5 S/A의 감도로 바이어스 전류 변화에따라 4-디케이드(decade)에 걸쳐서 선형적인 트랜스컨덕턴스를 갖는다.