• 제목/요약/키워드: Deburring Characteristics

검색결과 37건 처리시간 0.033초

디버링 휠의 회전수 변화에 따른 디버링 특성에 관한 실험적 연구 (An Experimental Study on the Deburring Characteristics according to rpm Change of Deburring Wheel)

  • 천경호;김해지
    • 한국기계가공학회지
    • /
    • 제17권5호
    • /
    • pp.103-110
    • /
    • 2018
  • The modern aircraft consists of tens/hundreds of thousands of components. A large proportion of these components are manufactured using a machining process. A deburring process must be performed after to machining. This study investigates the effect of changes in the deburring wheel rpm on the deburring force and radius. The deburring wheel is used to trim sharp edges off machined parts of the aircraft. The deburring wheel used consists of a core and a nylon hair(this new concept is protected under patent). We find that higher deburring wheel rpm results in increased deburring force and radius. For deburring wheel rotation rates of 500~750rpm, deburring force of 3.4~6.5kgf and deburring radius of 0.4~0.5mm were observed.

호닝의 버 생성 분석과 제거가공에 관한 연구 (Characteristics of Burr Generation and Deburring in Honing)

  • 최민석;김정두
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 1996년도 추계학술대회 논문집
    • /
    • pp.100-104
    • /
    • 1996
  • This paper describes the characteristics of micro-burr formation in the cross hatch and deburring in honed surfaces. Two types of micro-burrs formed in the cross hatch were defined as upper edge burr (type A) and side edge burr (type B). The size of micro-burrs were measured for the honed surfaces of several cross hatch angle. Deburring mechanism and system using magneto-electrolytic process including the abrasive pad for mechanic deburring effects together were introduced. Deburring experiments and analysis were carried out to confirm the effectiveness of the deburring process.

  • PDF

경사진 출구면에 발생한 버의 제거를 위한 디버링 공구의 효율적 운용 (Deburring experiment in drilling hole on the inclined exit surface)

  • 김병권;이경욱;박진우;홍상인;고성림
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2005년도 추계학술대회 논문집
    • /
    • pp.773-776
    • /
    • 2005
  • An Experiment was carried out to study deburring in frilling hole on the Inclined exit surface. Two different deburring tools, exit surface angles, materials and cutting conditions were selected to check their performance using CNC machining center. In deburring operation, there are not only flat exit surfaces but also inclined exit surfaces which is described as inclination angle. Inclination of exit surface causes a quite different burr formation when comparing with flat surface. Deburring characteristics are analyzed according to the deburring tools and cutting conditions. Several strategies for a effective deburring on inclined exit surface were proposed.

  • PDF

산업용로봇을 이용하는 지능 버 제거 시스템 개발에 관한 연구 (Development of Intellingent Deburring System Based on Industial Robot)

  • 신상운;최규종;안두성
    • 수산해양기술연구
    • /
    • 제34권1호
    • /
    • pp.1-5
    • /
    • 1998
  • This study presents intelligent deburring system which can transfer the exper's skill to deburring robot through neural network. The expert's skill is expressed as associate mapping between the characteristics of the burr and human expert's action. Under the fundamental idea that the state of the deburring process can be extracted via the visual sense of the human, we employ vision system for the perception and identification of the changing burr. From the demonstration of human experts, force data are measured and fitted impedance model. Finally the characteristics of the burr and coressponding force are associated by the neural network which is trained through many demonstrations. The proposed method is verified in the deburring process of welding burr.

  • PDF

자기연마를 이용한 디버링 특성 분석 (Analysis of Deburring Characteristics by Magnetic Abrasive Finishing Method)

  • 채종원;고성림
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2002년도 추계학술대회 논문집
    • /
    • pp.241-244
    • /
    • 2002
  • Deburring is conducted using MAF(magnetic abrasive finishing) method. Magnetic inductor is designed and manufactured to generate proper magnetic induction far deburring the burr formed in drilling SM45C. Rotational speed, table feed rate, grain size of powder and working gap are changed to investigate the effect on deburring.

  • PDF

입방정질화붕소입자 전착지석에 의한 전해디버링 시스템 (Electrochemical Deburring System by the Electroplated CBN Wheel)

  • 최인휴
    • 대한기계학회논문집A
    • /
    • 제21권3호
    • /
    • pp.430-438
    • /
    • 1997
  • Deburring and edge finishing technology as the final process of machining operation is required for manufacturing of advanced precise conponents. But, deburring is considered as a difficult problem on going to the high efficient production and automation in the FMS. Removal of burr couldn't have a standard of its definition because of its various shapes, dimensions and properties and mostly depends on manual treatment. Especially, deburring for cross hole inside is very difficult owing to its shape passing through out perpendicular to a main hole. The electrochemical method is suggested as its solution in practical aspect. Therefore, electrochemical deburring technology needs to be developed for the high efficiency and automation of internal deburring in the cross hole. In this study, the new process in the eliminating burr inside cross hole, electrochemical deburring by the wheel electroplated with Cubic-Boron-Nitrade abrasives, is suggested. Its deburring mechanism is described and machining performances is investigated. Also, CBN electroplated wheel is designed and manufactured and then characteristics of electrochemical deburring are investigated through experiments. Overall electrochemical deburring performance against burr inside cross hole is examined in the various power sources such as peak current and direct current.

마이크로 프레스에 의한 미세 펀칭 홀의 디버링 특성 (A Deburring Characteristics of Small Punching Holes using Micro Press)

  • 윤종학;안병운;박성준
    • 한국공작기계학회논문집
    • /
    • 제13권3호
    • /
    • pp.61-67
    • /
    • 2004
  • In micro hole punching process the burr occurs inevitably, but the burr must be minimized in order to improve the quality and accuracy of the product. In this study, magnetic field-assisted polishing technique is applied to remove the burr which exists in nozzles for ink-jet printer head and proved to be a feasible for deburring by experiment. The deburring characteristics of sheet metals was investigated changing with polishing time and magnetic abrasive size. After the deburring, the burr size has remarkably reduced and roundness of the hole also has improved.

비젼을 이용한 디버링 기술의 로봇에의 전달 (Deburring Skills to Robot Using Vision System)

  • 신상운;최규종;이규상;김영원;안두성
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 1995년도 추계학술대회 논문집
    • /
    • pp.1110-1113
    • /
    • 1995
  • This study presents the new method which can transfer the expert's skill to deburring robot through neural network. The expert's skill is expressed as associationmapping between the characteristics of the burr and human expert's action. Under the fundamental idea that the state of the deburring processcan be extracted via the visual sense of the human,we employ vision system for the perception and identification of the changing burr. Form the demonstration of human experts, force data are measured. Finally the characteristics of the burr and coressponding force are associated by the neural network which is trained through many demonstrations. The proposed method is verified in the deburring process of welding burr.

  • PDF

미세 펀칭 구멍의 디버링 특성에 관한 연구 (A Study on the Characteristics of Deburring for Micro Punching Holes)

  • 안병운;최용수;박성준;윤종학
    • 한국공작기계학회:학술대회논문집
    • /
    • 한국공작기계학회 2003년도 추계학술대회
    • /
    • pp.329-333
    • /
    • 2003
  • In micro hole punching process the burr occurs inevitably, but the burr must be minimized in order to improve the quality and accuracy of the product. In this study, magnetic field assisted polishing technique is applied to remove the burr which exists in nozzles for ink-jet printer head and proved to be a feasible for deburring by experiment. The deburring characteristics of sheet metals was investigated changing with polishing time. After the deburring, the burr size has remarkably reduced and roundness of the hole also has improved.

  • PDF

비젼을 이용한 디버링 기술을 로봇에 전달 (Transfer Deburring Skills to Robot Using Vision System)

  • 신상운;안두성
    • 한국정밀공학회지
    • /
    • 제15권9호
    • /
    • pp.93-100
    • /
    • 1998
  • This study presents the new method which can transfer the expert's skill to deburring robot through neural network. The expert's skill is expressed as association mapping between the characteristics of the burr and human expert's action. Under the fundamental idea that the state of the deburring process can be extracted via the visual sense of the human, we employ vision system for the perception and identification of the changing burr. From the demonstration of human experts, force data are measured. Finally the characteristics of the burr and corresponding force are associated by the neural network which is trained through many demonstrations. The proposed method is verified in the deburring process of welding burr.

  • PDF