• Journal of Life Science
• /
• v.30 no.3
• /
• pp.239-249
• /
• 2020

Persimmon flowers are fruit-bearing female, pollen-bearing male, or hermaphrodite, containing both a pistil and a stamen. Using prominent PCNA persimmons as male parents is very important for breeding programs, as the selection procedure for new cultivars bearing male flowers requires a long time and a large field in a traditional crossbreeding method. To improve breeding efficiency through early selection of male flower-bearing plants at the seedling stage, analysis was performed on 88 major cultivars whose gender expressions are known, using two male flower selection markers recommended by Akagi et al. The OGI locus marker and DISx-AF4S marker results showed that 83 and 72 cultivars, respectively, matched in terms of gender expression and marker analysis. For the OGI locus marker, 890 plants were selected from 2,509 seedlings obtained from crossbreeding with the mother plant "Migamjosang," which was the breeding cultivar. Comparing the gender expression of the flowers and the marker with 1,186 crossbred seedlings, excluding the unfertilized and dead plants, inconsistencies were found in 401 plants (33.8%). For the DISx-AF4S marker, 636 plants were selected from 889 seedlings obtained from 12 cross-combinations. The results of the sex expression and marker analysis were compared to 379 plants, excluding the unfertilized and dead plants, and inconsistencies were found in 247 plants (65.2%). These results indicate that the examined DISx-AF4S and OGI locus markers would not be suitable for utilization in the breeding field.

• Journal of the Korea Institute of Building Construction
• /
• v.17 no.2
• /
• pp.141-147
• /
• 2017

The purpose of this study is to develop an inorganic filling adhesive using MKP and borax based on Dead-burn magnesia and fly ash. First, basic experiments was conducted to derive the proper addition rate of MKP. And this experiment was carried out according to addition ratio of borax. The test items are measured for pot life, flexural strength, compressive strength, adhesive strength, tensile strength, ratio of temperature change, ratio of hardening shrinkage, radon gas and formaldehyde emission. As a result, the proper addition rate of phosphate was 35%. The pot time is about 10minutes, 15minutes and 25minutes according to addition rate of borax. The flexural strength and compressive strength were obtained at 12hours for minimum flexural strength of 8.0MPa and minimum compressive strength of 31.0MPa. The tensile strength was the least 4.1MPa, and the ratio of hardening shrinkage was maximum 2.4% and ratio of heat change was maximum - 0.3%, which satisfied all of the quality standards of 'KS F 4923' (epoxy resin for repairing concrete structures). Both Radon gas and formaldehyde emission was not detected.

• Tunnel and Underground Space
• /
• v.13 no.3
• /
• pp.187-195
• /
• 2003

This case study which is to make 2-Dimension earth's crust structures clearly is about the great boring-hole blasting to provide ground vibration source of the reflected wave research on the Korean Peninsula earth's crust structures research. For this study we've done blasting twice-500 ㎏/charge per delay, 1,000 ㎏/charge per delay, and the specifications of blasting are the following - dia.: 300 ㎜, boring-depth : 100m, besides, we used the explosives and electric detonators which have sufficient detonating velocity and very excellent safety, capacity of detonating, accurate delay time. We charged explosives into steel pipe with bulk type to avoid dead pressure by ground water. And then we tested about pipe airtight and blasting to certificate which has no problem by using on this study. In the results, we succeeded each blasting in Seosan, Youngdong. For the Peak Sum Vector(PSV) around the blasting at the main points, its real measured PSV is higher 180 % than estimated PSV with USBM. In this study we can't to be analysis of vibration velocity, but to be key providing vibration source.

• Journal of Veterinary Clinics
• /
• v.17 no.1
• /
• pp.93-101
• /
• 2000

This study was carried out to investigate the epidemiological prevalence of diseases from birth to weaning in 268 Koeran native calves which was delivered from three stock farm in Chonbuk area. We examined body weight gain, incidence rate of diseases and mortality rate in relation to age, season, environmental temperature and rearing management conditions for one year. The results of this experiment were as follows: Birth weight and body weight gain of Korean native calves born of primiparae were lower than those of multiparae. Body weight gain of diseased calves was lower than normal calves. Of 268 delivered calves, 242 calves(90.3%) were affected with gastronistestinal and/or respiratory diseases. The prevalence of the diseases were gastronitestinal disease(54.1%), gastronitestinal and respiratory disease(21.6%), and respiratory disease(14.5%). Of 242 diseased calves, 33 calves(13.6%) were occurred gastronitestinal disease and respiratory disease at different time respectively. Of 268 delivered calves, 126 calves were died(47%). The prevalence of the death were gastronitestinal disease(31.4%), gastronitestinal and respiratory disease(14.5%), and respiratory disease(1.1%). 81% of the diseases and 76.2% of the death were occurred in winter and a change of season(December to May). 59.1% of the diseases and 52.4% of the death were occurred at atmospheric temperatures below 1$0^{\circ}C$. 91.7% of the diseased calves and 96.8% of the dead calves were born of primiparae. 77.2% of the gastronitestinal disease were occurred within 2 weeks old, and the incidence was decreased with increasing age. Whereas the incidence of respiratory disease was incidence with ageing, and 69.2% of the respiratory disease were occurred between 2 weeks and 5 weeks old. And 62% of the gastronitestinal and respiratory disease wre occurred between 1 week and 3 weeks old. 65.1% of the dead calves were died within 2 weeks old. The morbidity and population mortality rate in each farm stock were 56.5%-104.9%, and 14.5%-64.2%, respectively.

• Journal of Korea Multimedia Society
• /
• v.10 no.10
• /
• pp.1295-1309
• /
• 2007

A wireless access point is used for all communications in the infrastructure mode wireless home networking, including communication between mobile nodes in the same service area. When a mobile station in the infrastructure mode wireless home networking moves into a dead zone, the communication between the mobile station and the access point is disconnected. To solve this problem, the existing wireless home network platforms focus on the ad hoc mode wireless home networking. However, the performance of an ad hoc network is poorly decreased when the number of mobile participating in the ad hoc network increases. In addition, although the ad hoc routing technique is necessary to support seamless communication of mobile nodes, the existing routing protocols, such as AODV and DSR, do not consider that a wireless channel state could affect performance significantly. Therefore, we propose a wireless home networking platform based on the ESCOD (End-to-end Seamless multi-hop COnnection based on Dual network mode) technique incorporating the VLR (Virtual Link Routing) scheme that supports end-to-end seamless connections. Extensive experiments show that the proposed wireless home networking platform incorporating the VLR scheme outperforms wireless home networking platforms based on the AODV and the DSR routing protocols respectively in terms of low packet transmission failure rate, fast packet transmission time, high TCP performance, and a wider coverage area of wireless home networks.

• The Korean Journal of Ecology
• /
• v.28 no.5
• /
• pp.327-333
• /
• 2005

For the first time in Korea, plant size, distribution pattern and root growth form of Tamarix chinensis were surveyed at natural stand in Shiwha Lake, from June to July in 2005. T, chinensis grew in the range of 350 m towards north-south and 270 m in east-west direction. The mean number of stems germinated from same root system was 1.9. On the stem base, the numbers of living and dead plants were 1,398 and 114, respectively. Mean perimeter and height of 1,398 plants were $5.9{\pm}3.2$ cm and $159{\pm}51$ cm, respectively. By dividing into 10 classes based on the perimeter size, the largest number of plants were included in the second smallest class category. However, by dividing into 10 classes on the bases of plant height, variation in the number of plants along the height showed normal distribution curve. The heights of dead plants were small in perimeter but diverse in height. On the root base, the number of plants was the greatest in the smallest size class, and conspicuously decreased with size increment. Distribution of T. chinensis was clumped pattern. Age of the largest plant was 8-year. T. chinensis had two types of root growth. One was horizontal growth in the periphery of soil surface, and the other vertical growth.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.7
• /
• pp.929-935
• /
• 2014

This paper is study on the pressure monitoring system(PMS) for ship's engine performance analysis( SEPA) based on web, with high speed and accuracy. This system is composed of pressure sensor, monitoring module with multi channel A/D converter, TCP/IP and satellite internet communication system. Existing domestic products measure cylinder pressure when piston of first explosive cylinder reached TDC(the top dead center) point and then measure next cylinder pressure manually each angle divided by a constant rotating interval. But presented system monitors in the local and web computer, using pressure information transmitted from pressure sensor installed on each engine. In this system, it is possible to increase the accuracy of the engine performance analysis because not only each TDC points but cylinder pressures synchronized with the TDC points could be measured in real time, accurately. And therefore, it may be used in a various diagnosis of main engines, such as deviations of each cylinder maximum pressures(Pmax) and the TDC firing positions and combustion conditions.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.4 no.4
• /
• pp.248-253
• /
• 2002

This study was to provide information about snow falling phenomenon in Korea for 1934 years from BC 6 to 1928 based on the records of old literatures, which are the true record of the Chosun dynasty, records of king Kojong and Soonjong, and some data including history of the Koryo in internet home page of Korea meteorological administration. Key words used in search procedure were totally 20 words such as snow, heavy snow, big snow, snow pellets, snowstorm, avalanche, etc. The searching contents consisted of the time of the first and the last snow, the amount of snow falling, snow damage, the thought about heavy snow phenomenon, and unusual weather conditions related to snow. The earliest record for the first snow was July of the rural calendar in 733 and the latest record for the last snow was June 11 of the lunar calendar. From these records, it could be estimated that there were some snow falling even in summer season. The amount of almost heavy snow ranged from 1.2 m to 1.5 m, but sometimes there were some records about the amount of snow falling higher than 3 meters. It was also found that there were three records about big heavy snow damages. In 1524 and 1525, approximately 100 and 140 peoples in Kyungsung, Hamgyung Province were dead due to heavy snowstorm. It was also recorded that 91 people in Jeiu island were dead in 1670 because of snow damage. Some singular records about snow were also found in old literatures. There was a congratulatory ceremony of new snow when the first snow was falling in the year. There was also a ritual praying for snow when there was no snow in the year. It was also found that there was snow falling with worms and red snow falling.

• Clinical and Experimental Reproductive Medicine
• /
• v.24 no.1
• /
• pp.21-26
• /
• 1997

This study was undertaken to examine the expression of EGF-R protein on ICM obtained from mouse IVF/IVC blastocyst by immunosurgery and indirect immunofluorescence(IIF). ICM cells used for this experiment were obtained from immunosurgery of mouse blatstocysts produced at 96 h after IVF, and recovered ICMs were assayed for cell viability and expression of EGF-R. The results obtained in this experiment were summarized as follows: when blastocysts were exposed to rabbit anti-mouse serum (antiserum) for 15-30 min. and then transferred them to guinea pig serum (complement) for 15-60 min., recovery rates of isolated ICMs were 8.0-84.2%. Especially, the best recovery (84.2%) of ICMs was obtained when exposure time to antiserum and complement was 30 min. and 60 min., respectively. In addition, when viability of isolated ICMs after immunosurgery was assessed by live/dead staining method, in all groups viability (93.8-100.0%) of isolated ICMs were not damaged if separated from TE cell. Also, we detected the expression of EGF-R on ICM cell by IIF. Therefore, these results suggest that EGF-R expression on the ICMs can stimulate the higher usablity of exogenous EGF to improve the preimplantation embryo development in vitro.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.9
• /
• pp.54-62
• /
• 2015

Although NAND flash-based SSD (Solid-State Drive) provides superior performance in comparison to HDD (Hard Disk Drive), it has a major drawback in write endurance. As a result, the lifetime of SSD is determined by the workload and thus it becomes a big challenge in current technology trend of such as the shifting from SLC (Single Level Cell) to MLC (Multi Level cell) and even TLC (Triple Level Cell). Most previous studies have dealt with wear-leveling or improving SSD lifetime regarding hardware architecture. In this paper, we propose the optimal configuration of host I/O stack focusing on file system, I/O scheduler, and link power management using JEDEC enterprise workloads in terms of WAF (Write Amplification Factor) which represents the efficiency perspective of SSD life time especially for host write processing into flash memory. Experimental analysis shows that the optimum configuration of I/O stack for the perspective of SSD lifetime is MinPower-Dead-XFS which prolongs the lifetime of SSD approximately 2.6 times in comparison with MaxPower-Cfq-Ext4, the best performance combination. Though the performance was reduced by 13%, this contributions demonstrates a considerable aspect of SSD lifetime in relation to I/O stack optimization.