• 제목/요약/키워드: Dead end

검색결과 230건 처리시간 0.024초

환외여과에 있어서 Si 콜로이드 용액의 투과유속 감소 및 오염특성 (Flux Decline and Fouling Mechanism of Si Colloidal Solution During the Ultra-Filtration)

  • 남석태;전재홍;이석기;최호상
    • 청정기술
    • /
    • 제5권2호
    • /
    • pp.25-35
    • /
    • 1999
  • Si 미립자를 함유한 콜로이드용액의 중공사막에 의한 한외여과 투과유속 감소특성을 검토하였다. 중공사막의 시간변화에 따른 투과유속 감소현상은 막표면에 형성된 케익층의 증가 및 세공막힘에 기인하였다. 흐름형태를 달리했을 경우의 준 정상상태에서 dead-end flow의 투과유속은 cross flow의 약 60 % 이었다. Cross flow에서 운전압력이 증가함에 따라 $J/J_w$는 감소하였으며, $0.5kg_f/cm^2$일 때의 64.2 %에서 $2.0kg_f/cm^2$일 때 45.7%로 감소하였다. 공급유량이 3 L/min일 때 초기저항은 세공막힘이 지배적이며, 공급유량이 1 L/min에서 3 L/min로 증가함에 따라 $R_c$는 약 40 % 감소한 $1.79{\times}10^{12}{\sim}2.34{\times}10^{12}m^{-1}$ 이었으나 $R_p$는 크게 변하지 않은 $1.71{\times}10^{12}m^{-1}$이었다.

  • PDF

상변환/졸-겔법에 의한 $ZrO_2$ 나노입자 함유 Polyethersulfone 한외여과 막의 제조 (Preparation of Polyethersulfone Ultrafiltration Membranes Containing $ZrO_2$ Nanoparticles by Combining Phase-inversion Method/Sol-gel Technique)

  • 염경호;이윤재
    • 멤브레인
    • /
    • 제16권4호
    • /
    • pp.303-312
    • /
    • 2006
  • 상변환과 졸-겔 반응을 동시에 행하는 새로운 제막법으로 나노크기의 $ZrO_2$ 입자가 함유된 비대칭형 PES-$ZrO_2$ 복합 막을 제조하였다. PES-$ZrO_2$ 복합 막 제조의 최적 제막 조건을 복합 막에의 인 흡착실험을 수행하여 인 흡착량이 최대가 되는 조건으로서 결정하였는바, 최적 제막 조건은 캐스팅 용액에 1 mL의 PES 당 0.15 mL의 $Zr(PrO)_4$ 첨가 및 비용매 1 L에 1 mL $Zr(PrO)_4$ 당 30 mL의 $HNO_3$ 촉매를 첨가했을 때 이었다. 복합 막의 단면 구조, 막성능 및 $ZrO_2$ 입자 함유량 변화를 SEM, 순수투과량, TGA, ICP, XRD 및 접촉각 측정을 통해 결정하였는바, 캐스팅 용액에의 $Zr(PrO)_4$ 첨가량이 증가할수록 순수 투과량이 증가하며, $ZrO_2$ 입자 함유량은 1 mL의 PES 당 0.15 mL의 $Zr(PrO)_4$ 첨가했을 때 최대가 되었다. 복합 막의 표면 특성을 친수성으로 개선하기 위하여 인산처리를 하였으며, 인산처리 전후(前後)의 두 종류 PES-$ZrO_2$ 복합 막을 대상으로 한 BSA 용액의 dead-end 한외여과 실험을 수행하여 막오염 형성의 억제 정도를 평가한 결과 인산처리 시킨 복합 막의 경우 투과량과 BSA 배제도 모두 약 40% 정도 증가하였는데 이는 복합 막을 인산처리 시킴으로서 막특성이 친수화 되었기 때문이다.

공극 구조 내 교차 주입이 비혼성 유체의 포획 및 거동에 미치는 영향 (Effect of Cyclic Injection on Migration and Trapping of Immiscible Fluids in Porous Media)

  • 안혜진;김선옥;이민희;왕수균
    • 자원환경지질
    • /
    • 제52권1호
    • /
    • pp.37-48
    • /
    • 2019
  • 이산화탄소 지중저장 수행 중 저류층 내부에서 나타나는 비혼성 유체의 대체 과정은 다공성 매체의 공극 표면에 대한 각 유체의 습윤 특성에 따라서 배수(drainage)와 흡수(imbibition)로 구분되는데, 각 과정 동안 나타나는 비혼성 유체 간의 거동 및 포획 양상을 이해하는 것은 주입 효율성 및 저장 안정성을 평가하는데 매우 중요하다. 본 연구에서는 다공성 매체 내 주기적인 배수와 흡수 과정의 수행을 통해 공극 구조 내 비혼성 유체의 거동 양상 및 분포의 변화를 분석하고자 하였다. 이를 위하여 2차원 마이크로모델 내부로 이산화탄소와 공극수의 대체 유체로서 선정된 헥산과 탈이온수를 주기적으로 교차 주입하는 실험을 수행하였다. 관측 결과를 이용하여 각 유체 주입 과정에서 나타나는 두 비혼성 유체의 거동 양상을 비교 분석하고, 잔류 유체의 포화도를 산정하였다. 분석의 결과로서 헥산과 탈이온수의 잔류 포획 유형을 기작에 따라 습윤성(wettability), 모관압(capillarity), 막다른 공극(dead end zone), 포위(entrapment) 그리고 우회(bypassing)로 구분하였다. 또한, 교차 주입이 거듭됨에 따라 공극 구조 내에서 주입 유체의 흐름 경로는 주 흐름 경로(main flow channel)를 중심으로 단순화되었으며, 이로 인하여 주입 유체의 대체 효율은 일정한 값으로 수렴하였다. 실험적 관측과 분석의 결과는 실제 이산화탄소 지중저장 환경에서 습윤성-비습윤성 유체의 주기적인 교차 주입이 야기하는 저장층 내 비혼성 유체의 거동과 분포, 그리고 주입 유체의 대체 효율을 예측하는데 활용될 수 있을 것으로 판단된다.

예비화학교사의 교육실습에서 담화 맥락을 고려한 발문 분석 (An Analysis of Pre-service Chemistry Teachers' Questions in Their Teaching Practices Considering the Context of Discourse)

  • 김성훈;김지수;노태희;김민환
    • 한국과학교육학회지
    • /
    • 제42권4호
    • /
    • pp.383-396
    • /
    • 2022
  • 이 연구에서는 교육실습에서 예비화학교사의 발문을 담화 맥락을 고려하여 분석하였다. 서울특별시에 소재한 사범대학 화학교육과에 재학 중이고, 교육실습에 참여한 예비화학교사 5명이 연구에 참여하였다. 연구참여자들의 한 차시 수업을 녹화하였고, 교수학습 자료를 수집하였으며, 면담도 수행하였다. 선행연구의 분석틀을 참고하여 발문을 내용 관련 발문, 정의적 발문, 폐쇄적 발문, 수사적 발문, 구조적 발문으로 발문을 분류하였고, 각 발문을 학생들의 응답을 토대로 적절한 발문과 교사 편의적 발문으로 분류하였다. 연구 결과, 몇 가지의 유형의 발문은 예비교사들이 맡은 수업 내용의 특성에 따라 빈도가 다르게 나타났다. 교사 편의적 발문을 한 후 예비교사들은 학생들의 응답을 유도하기보다는 교사가 답을 제시하는 방식으로 주로 수업을 진행하였다. 또한, 예비교사들은 학생들의 응답 내용을 활용하는 발문들과 정의적 발문은 거의 사용하지 않았다. 예비교사들은 폐쇄적 발문을 학생의 학습 정도를 간단하게 파악하고 상호작용을 촉진하기 위한 목적으로 활용하였다. 수사적 발문은 내용을 강조하기 위한 목적뿐 아니라 학생들의 주의 집중을 유발하거나 사고를 촉진하는 등 다양한 목적으로 사용되었다. 연구 결과를 바탕으로 예비화학교사의 발문 전문성을 향상하기 위한 방안을 논하였다.

급성 폐사 바지락 (Ruditapes philippinarum) 으로부터 Perkinsus olseni의 확산 기작 (Dissemination of Perkinsus olseni is affected by the viability of Ruditapes philippinarum)

  • 남기웅;정희도;송재희;최광식;박경일
    • 한국패류학회지
    • /
    • 제31권4호
    • /
    • pp.267-272
    • /
    • 2015
  • This study was conducted in order to elucidate the dissemination mechanism of P. olseni using field and laboratory experiments. For this purpose, we quantified the level of P. olseni infection in buried (healthy) and surfaced (gapped) R. philippinarum from a clam bed on Wi-do Island on the west coast of Korea. In addition, the levels of internal and released P. olseni cells from artificially infected (and later dead) R. philippinarum were monitored for 8 days using the RFTM-2 M NaOH lysis method. Our results indicate that P. olseni cells in buried R. philippinarum was $2,655,625{\pm}1,536,936cells/clam$; the level in gapped R. philippinarum was considerably lower, $28,203{\pm}24,889cells/clam$ (p < 0.05). In the laboratory experiment, the P. olseni cells remained in the host tissue 2 days after death was approximately 50% lower than the level of infection measured in living clams. The level dropped to 20% 4 days after death and to 1.5% 6 days after death; eight days after death, P. olseni cells were undetectable since the R. philippinarum flesh had completely decomposed. The level of released cells on the day of death was only 0.05% of the internal level in live R. philippinarum; however, the level increased to 2.3% 5 days after death then gradually decreased and no released cells were detected 8 days after death. Therefore, our laboratory experiment suggest that the low level of P. olseni infection observed in gapped R. philippinarum at Wi-do Island could be caused by lysis of the most of P. olseni cells during the decomposition of dead R. philippinarum tissues. Until the end of decomposition of R. philippinarum, 6.68% of the total amount of P. olseni was released within 8 days. Our study showed that the amount of P. olseni cells from dead host is a considerably higher level than naturally released from healthy R. philippinarum, suggesting that death of the host plays an important role in the dissemination of P. olseni.

컴파일러에 의한 C레벨 에러 체크 (Compiler triggered C level error check)

  • 정지문;윤종희;이종원;백윤흥
    • 정보처리학회논문지A
    • /
    • 제18A권3호
    • /
    • pp.109-114
    • /
    • 2011
  • IR(Intermediate Representation) 최적화 과정은 컴파일러 back-end의 중요한 부분으로서 sub-expression elimination, dead code elimination 등 최적화 기법들을 사용한다. 하지만 IR 최적화 단계에서 생기는 에러들을 검출하고 디버깅하는데 많은 어려움이 있다. 그 첫 번째 이유로는 컴파일 된 어셈블리 코드를 해독하여 에러를 체크하기 어렵고 두 번째로는 IR 최적화 단계에서 에러가 생겼는지 결정 짓기 어렵기 때문이다. 이런 이유들로 인하여, 우리는 C 레벨에서 IR 코드변환 무결점 여부를 체크하기 위한 기법들에 관한 연구를 진행하여 왔다. 우리는 MeCC(Memory Comparison-based Clone) 탐색기를 기반으로 하여, 최적화하기 전 IR코드와 최적화 한 후의 IR코드를 각각 C코드로 다시 변환한 뒤, 이 두 개의 C코드를 MeCC의 입력으로 주고, 결과의 일치 여부를 확인하는 방법을 사용한다. 하지만 MeCC가 완벽한 결과를 알려주지 않기 때문에, 우리는 각 IR 최적화 기법마다의 특징에 대한 정보를 사전에 처리해서 그 결과의 정확도를 높였다. 이 논문에서는 dead code elimination, instruction scheduling 및 common sub-expression elimination 등 최적화 기법들을 이용한 변환 코드들을 예시로 실험하여 최종적으로 MeCC에서의 C 레벨 코드의 정확한 에러 체크 동작여부를 보여준다.

풍력발전기 블레이드 처짐 측정을 위한 다중화 센서 탐촉자 설계 제작 (Fabrication of a Multiplexing Sensor Probe for Measuring the Blade Deflection of a Wind Power Generator)

  • 김지대;이동주
    • 한국생산제조학회지
    • /
    • 제23권2호
    • /
    • pp.178-185
    • /
    • 2014
  • This paper describes a fabrication multiplexing sensor probe that employs a fiber Bragg grating(FBG) based on multiple measurements to determine the blade deflection of a wind power generator the reliability analysis of this probe is also presented. To diminish the temperature sensitivity of the FBG sensor, we form multiple CFRPs onto the upper and lower layers of the FBG and package it with an epoxy resin. As a result, the depth of the CFRP is 1mm, and the temperature sensitivity is $2.39pm/^{\circ}C$. We construct a sensor network utilizing the fabricated sensor with a blade beam model. As the number of pendulums is increased on the fore-end of the beam, the strain value is measured. The strain variation is calculated from the measurement of the load on the blade beam model by monitoring the strain of the FBG sensor. When the linear equation is applied, the strain error is 0.4% and when the finite difference method is used, the tip deflection error is 3.3%. The displacement error derived from the strain value of the FBG sensor is 4.39%. The calculated result between the measured value of the dead-end of the beam and the strain is less than 2.46% tip distortion error. Therefore, our proposed multiplexing sensor probe is a low-cost and high-reliability solution for a commercial wind power generator.

암모니아 가스 제거를 위한 포괄고정화 담체 개발 (Development of Encapsulated Media for Ammonia Removal)

  • 정미영;남궁형규;송지현;황선진
    • 한국물환경학회지
    • /
    • 제25권2호
    • /
    • pp.306-310
    • /
    • 2009
  • Packed-bed reactor for removing ammonia was tested at different loading rates. Nitrifiers for ammonia removing was encapsulated in gel media which consisted of polyethlene glycol, alginate and activated carbon. The removal efficiency was nearly 100% when ammonia loading was $12g/m^3/hr$, and the maximum elimination capacity (EC) achieved on this study was $18g/m^3/hr$. The initial microbial portion of nitrifiers in the media was about 82% and it was increased to more than 90% at the end of the operation. Short-term shock loading test was carried out to survey the stability of the media. The inlet loading rates were varied from 2 to $20g/m^3/hr$. The packed-bed reactor overcame the shock loading i.e. removal efficiency recovered rapidly from about 80% to almost 100% within 6 hrs. The results of Live/Dead cell test showed that nitrifiers maintained there activity in the encapsulated media during the test and also against ammonia shock load.

중증 만성폐쇄성 폐질환 환자로 살아가기 -살얼음판 위를 걸어가는 삶- (Living as Severe COPD Patient - Life of Stepping on the Thin Ice)

  • 김성렬;김윤옥;권경민
    • 성인간호학회지
    • /
    • 제22권6호
    • /
    • pp.663-675
    • /
    • 2010
  • Purpose: The purpose of this study was to explore the life experiences of patients with a severe Chronic Obstructive Pulmonary Disease (COPD). Methods: The data were collected through in-depth interviews of six patients suffering from severe COPD. The interviewed data were audio-recorded and transcribed verbatim and checked for accuracy. The Giorgi method of phenomenology was used for analyzing data. Results: Eight themes forming the, units of meaning, were: Repeated and Unpredictable Suffering of Dyspnea, Confidence Loss/Exhaustion Life due to non-efficient breathing, Gradually Deprived Liberty, Absolute Being to Sustaining my life, Source of Burden but Significant Person I am in the Family, Endless Tug-of-War-Capability/Endeavor to Breath, Longing for my Life, and Dead-end of breathing. Conclusion: The study results provide an in-depth understanding of life experiences of patients suffering from severe COPD. The findings will be useful to nurses caring for this population.

자율무인잠수정의 지형참조항법 연구 (Terrain Referenced Navigation for Autonomous Underwater Vehicles)

  • 목성훈;방효충;권재현;유명종
    • 제어로봇시스템학회논문지
    • /
    • 제19권8호
    • /
    • pp.702-708
    • /
    • 2013
  • Underwater TRN (Underwater Terrain Referenced Navigation) estimates an underwater vehicle state by measuring a distance between the vehicle and undersea terrain, and comparing it with the known terrain database. TRN belongs to absolute navigation methods, which are used to compensate a drift error of dead reckoning measurements such as IMU (Inertial Measurement Unit) or DVL (Doppler Velocity Log). However, underwater TRN is different to other absolute methods such as USBL (Ultra-Short Baseline) and LBL (Long Baseline), because TRN is independent of the external environment. As a magnetic-field-based navigation, TRN is a kind of geophysical navigation. This paper develops an EKF (Extended Kalman Filter) formulation for underwater TRN. A filter propagation part is composed by an inertial navigation system, and a filter update is executed with echo-sounder measurement. For large-initial-error cases, an adaptive EKF approach is also presented, to keep the filter be stable. At the end, simulation studies are given to verify the performance of the proposed TRN filter. With simplified sensor and terrain database models, the simulation results show that the underwater TRN could support conventional underwater navigation methods.