• Title/Summary/Keyword: Dead Block

Search Result 41, Processing Time 0.036 seconds

A Case Report of Heart-Lung Transplantation (심장-폐 이식 증례 보고)

  • 노준량;허재학;오삼세;김영태;이정렬;이기봉;오병희;한성구
    • Journal of Chest Surgery
    • /
    • v.31 no.10
    • /
    • pp.1004-1008
    • /
    • 1998
  • We report a case of heart-lung transplantation in a 32 year-old female with Eisenmenger syndrome secondary to patent ductus arteriosus. She has been suffered from congestive heart failure since June 1996 and repeatedly treated at Intensive Care Unit with intravenous inotropic support since July 1997. Preoperative echocardiography showed a patent ductus arteriosus with right to left shunt, severe regurgitation of tricuspid valve and estimated right ventricular systolic pressure of 100mmHg. The brain-dead donor was an 18 year-old male with head trauma from traffic accident 3 days ago. Heart-lung block procurement was performed at another general hospital and was transported to the Seoul National University Hospital by ambulance. Total ischemic time of the transplanted heart and lung were 249 minutes and 270 minutes, respectively. The immunosuppressive therapy was commenced preoperatively with cyclosporine and azathioprine. Corticosteroid was not used until postoperative 3 weeks in order to avoid infection and delayed healing at the tracheal anastomotic site. The patient was discharged at 31st postoperative day, and has been regularly followed up at outpatient clinic without specific complication. The follow-up bronchoscopy, performed 2 weeks and 4 months after surgery, revealed no evidence of cellular rejection.

  • PDF

An Observational Study on the Temperature Rising Effects in Water Warming canal and Water Warming Pond (온수로 및 온수지에서의 수온상승효과에 관한 조사연구)

  • 홍종백;홍성범
    • Magazine of the Korean Society of Agricultural Engineers
    • /
    • v.32 no.3
    • /
    • pp.31-38
    • /
    • 1990
  • The power water flowed out from the multipurpose darn influences the ecosystem approximately because of the low water temperature. An appropriate counter measure to the rising water temperature is needed for growing crops especially when the temperature is below 18˚C in the source of the irrigation water This observational study is practiced in Yong-Doo water warming canal and pond in the down stream of Choong-Ju multipurpose dam and is practiced for analyse and compare the rising effects in actural water temperature by actual measurement with the rising effects of planned water temperatuer by the basic theoritical method and for the help to present the direction in plan establishment through investigate the results afterwards. The results are as follows. 1.The degree of the rise of the water temperature can be decided by $\theta$x=$\theta$o +K L--v.h (T-$\theta$˚)Then, K values of a factor representing the characteristics of the water warming canal were 0.00002043 for the type I. and 0.0000173 for the type II. respectively. 2.A variation of water temperature which produced by the difference effective temperature and water temperature in the water warming canal was $\theta$x1 = 16.5 + 15.9(1-e -0.00018x), $\theta$x2 =18.8 + 8.4( 1-e -0.000298x)for the type I. and $\theta$x, = 19.6 + 12.8 ( 1-e -0.00041x) for the type II. 3.It was shown that the effects of the rise of water temperature for the type I. water warming canal were greater than that of type II. as a resultes of broadening the surface of the canal compared with the depth of water, coloring the surface of water canal and installing the resistance block. 4.In case of the type I. water warming canal, the equation between the air temperature and the degree of the rise of water temprature could be made ;Y= 0.4134X + 7.728 In addition, in case of the type II. water warming canal, the correlation was very low. 5.A monthly variation of the water temperature in the water warming canal was the highest in August during the irrigation period and the water temperature rose with the air temperature until August. However, it was blunted after then. 6.A rising degree of water temperature of the practical value in the water warming pond was higher than that of the theoritical equation by 69% for the type I. and 57% for the type II. Accordingly, it was possible to acquire the result near the practical value.$\theta$w-$\theta$o=[1-exp{ -h(1+2$\psi$) . X($\theta$w-$\theta$0)XC Here, C values are 1.69 for the type I. and 1.57 for the type II. 7.It was shown that the effect of the rise of water temperature was favorable when the thermal absorption was to be good by coloring the surface of the water warming pond and removing the bottom osmosis. 8.By enlarging the surface of water in comparison with the depth, and by having dead area of water in the water warming pond, this structure in the water warming pond is helpful for the rise of water temperature.

  • PDF

A Study on Stability and Economic feasibility according to Height on the MSE Wall with Pacing Panel (고속도로 도로부에 시공된 패널식 보강토 옹벽의 높이별 안전율과 경제성 검토)

  • Park, Min-Cheol
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.19 no.5
    • /
    • pp.54-63
    • /
    • 2018
  • In this study, the stability and economic feasibility of a MSE (Mechanically stability earth) wall with a pre-cast concrete pacing panel was investigated for a standard section of highway. Based on the design criteria, the MSE walls of the panel type were designed considering the load conditions of the highway, such as the dead load of the concrete pavement, traffic load, and impact load of the barrier. The length of the ribbed metal strip was arranged at 0.9H according to the height of the MSE walls. Because the length of the reinforcement was set to 0.9H according to the height of the MSE wall, the external stability governed by the shape of the reinforced soil was not affected by the height increase. The factor of safety (FOS) for the bearing capacity was decreased drastically due to the increase in self-weight according to the height of the MSE wall. As a result of examining the internal stability according to the cohesive gravity method, the FOS of pullout was increased and the FOS of fracture was decreased. As the height of the MSEW wall increases, the horizontal earth pressure acting as an active force and the vertical earth pressure acting as a resistance force are increased together, so that the FOS of the pullout is increased. Because the long-term allowable tensile force of the ribbed metal strip is constant, the FOS of the fracture is decreased by only an increase in the horizontal earth pressure according to the height. The panel type MSE wall was more economical than the block type at all heights. Compared to the concrete retaining wall, it has excellent economic efficiency at a height of 5.0 m or more.

Development of Precast Hollow Concrete Columns with Non-Shrink Mortar Grouting Type Splice Sleeve (무수축 모르타르 충진형 슬리브를 사용한 중공 프리캐스트 교각 개발)

  • Cho, Jae-Young;Lee, Young-Ho;Kim, Do-Hak;Park, Jong-Heon
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.31 no.3A
    • /
    • pp.215-225
    • /
    • 2011
  • In general, the precast columns can obtain its homogeneous quality as they are produced in a factory with a hollow concrete block type by using high strength concrete, so that they can generate the reduction of dead load. Such a method of precast hollow concrete columns is already implemented in USA and Japan and used for connecting between blocks which use PC tendons. However, it is inevitable to have uneconomical construction with excessive cost in early stage when PC tendons are used. This study aims to develop an economical precast column with high quality and constructability which consists of only splice sleeve and general reinforcing bar without using PC tendons in order to reduce the construction period and cost. To achieve this goal, this study tested the performance of total 5 minimized models in the experiment with the variables such as hollowness, diameter of main reinforcement bar and cross-sectional size for the cross section of precast column by using grouting type splice sleeve which is a new type joint rebar. And it also verified the performance of column in the experiment for a large-sized model in order to overview its applicability by excluding large scale effect.

An Efficient Dead Pixel Detection Algorithm Implementation for CMOS Image Sensor (CMOS 이미지 센서에서의 효율적인 불량화소 검출을 위한 알고리듬 및 하드웨어 설계)

  • An, Jee-Hoon;Shin, Seung-Gi;Lee, Won-Jae;Kim, Jae-Seok
    • Journal of the Institute of Electronics Engineers of Korea SD
    • /
    • v.44 no.4
    • /
    • pp.55-62
    • /
    • 2007
  • This paper proposes a defective pixel detection algorithm and its hardware structure for CCD/CMOS image sensor. In previous algorithms, the characteristics of image have not been considered. Also, some algorithms need quite a time to detect defective pixels. In order to make up for those disadvantages, the proposed defective pixel detection method detects defective pixels efficiently by considering the edges in the image and verifies them using several frames while checking scene-changes. Whenever scene-change is occurred, potentially defective pixels are checked and confirmed whether it is defective or not. Test results showed that the correct detection rate in a frame was increased 6% and the defective pixel verification time was decreased 60%. The proposed algorithm was implemented with verilog HDL. The edge indicator in color interpolation block was reused. Total logic gate count was 5.4k using 0.25um CMOS standard cell library.

Effects of Seeding Dates and Growth Periods on the Growth Characteristics, Dry Matter Yield and Feed Value of Corn for Silage in Paddy Field (논토양에서 파종시기와 재배기간이 사일리지용 옥수수의 생육특성, 건물수량 및 사료적 가치에 미치는 영향)

  • Lee, Sang-Moo;Lee, Jae-Hun
    • Journal of Animal Science and Technology
    • /
    • v.52 no.5
    • /
    • pp.441-448
    • /
    • 2010
  • This study was carried out to investigate the effects of the seeding dates and growth periods on the growth characteristics, dry matter yield and feed value of corn for silage in paddy field. The experimental design was arranged in a randomized block design with three replications. Treatments consisted of five seeding dates, 1 May (T1), 8 May (T2), 15 May (T3), 22 May (T4) and 29 May (T5). And harvesting time homologized by August 24. Therefore, growing periods were 115 days (T1), 108 days (T2), 101 days (T3), 94 days (T4) and 87 days (T5), respectively. In maturities at harvest time, T1, T2, T3, T4 and T5 were full dent, early dent, late dough, dough and early dough stage, respectively. Plant height and numbers of root system were highest in T5 (p<0.01), but leaf length was higher in T4 than others (p<0.05). Dead leaf, tip filling degree and ear circle were higher in T1 than others (p<0.05, 0.01). Leaf width, ear height, leaf number, ear length, stem diameter, stem hardness and brix were not significantly different among the treatments. Dry matter yield and TDN yield were higher in the order of T1 > T2 > T3 > T4 > T5 (p<0.01). Crude protein, crude ash, NDF, ADF and crude fiber were significantly higher in T4 (p<0.05, 0.01). But crude fat was the highest in T1, T3 was the lowest as compared to other treatments (p<0.01). Total EAA(essential amino acids) were higher in order of T4 > T3 > T1 > T2 > T5, and total NEAA (nonessential amino acids) were higher in order of T1 > T4 > T2 > T3 > T5, and total amino acids were higher in order of T4 > T1 > T3 > T2 > T5. But no significant differences were found among the treatments. TUFA (total unsaturated fatty acid) and TSFA (total saturated fatty acid) were in order of T1 > T2 > T3 > T5 > T4 (p<0.01). Minerals were the highest in T4 (4,721.25 mg/kg), and T2 (2,970.80 mg/kg) was the lowest as compared to other treatments (p<0.05). Based on the above results, seeding dates could be recommended as early May, and harvest times is yellow ripe stage for qualitative and quantitative production of corn for silage in rice paddy field soil.

Effects of Harvest Stage on Agronomic Characteristics, Yield and Feed Value of Silage Corn in the Newly Reclaimed Hilly Land (산지 신개간 토양에서 사료용 옥수수 수확시기가 생육특성, 생산성 및 사료가치에 미치는 영향)

  • Do, Gu-Ho;Kim, Eun-Joong;Lee, Sang-Moo
    • Journal of The Korean Society of Grassland and Forage Science
    • /
    • v.32 no.3
    • /
    • pp.253-264
    • /
    • 2012
  • This study was carried out to investigate growth characteristics, yield, chemical compositions and nutrients yield of corn hybrids for silage in the newly reclaimed hilly land. The experimental design was arranged in a randomized block design with three replications. The seeding time was at May 6. The harvest time of four treatments was milk stage (97 days), dough stage (105 days), yellow stage (112 days) and late yellow stage (119 days after seeding). Plant height, ear height, leaf numbers and ear length were highest in yellow stage (p<0.05, 0.01), but dead leaf, stem hardness and sugar degree (Brix) were higher in late yellow than other treatments. Leaf width, tip filling degree and fresh yield were not significantly different. Dry matter yield increased as the maturity stage progressed (p<0.01). Crude protein and crude fat were not significantly different. NDF and ADF decreased as the maturity stage progressed (p<0.01). Ca content was the highest at milk stage (p<0.05), Fe and P were the highest at dough stage (p<0.05, 0.01). However another minerals were not significantly different. Essential amino acid (EAA), nonessential amino acid (NEAA) and total amino acid were highest at yellow stage, but no significant differences were found among the treatments. Total free sugar contents were higher in the order of Milk > dough > yellow > late yellow stage, but no significant differences were found among the treatments. Crude protein yield was the highest at yellow stage, but crude fat yield, amino acid yield and TDN yield were highest at late yellow stage (p<0.01). Total mineral yield showed no significant difference. Based on the above results, yellow and late yellow stage compared to other maturity stage have been shown to increase dry matter yield and nutrients yield, when silage corn grow cultivate in the newly reclaimed hilly land.

A Comparative Study on the Growth Characteristics and Nutritional Components of Corn Hybrids for Silage at Paddy Field Cultivation (논토양에 사일리지용 옥수수 재배시 품종별 생육특성 및 영양성분 비교 연구)

  • Kim, Wan-Su;Hwang, Joo-Hwan;Lee, Jae-Hun;Kim, Eun-Joong;Jeon, Byong-Tae;Moon, Sang-Ho;Lee, Sang-Moo
    • Journal of The Korean Society of Grassland and Forage Science
    • /
    • v.32 no.1
    • /
    • pp.15-28
    • /
    • 2012
  • This study was carried out to know adaptability and growth characteristics, yield, chemical compositions and nutrition yield of corn hybrids for silage at paddy field. The field experiments were conducted at Sangju province for one year (2009). The experimental design was arranged in a randomized block design with three replication. The treatments consisted of eleven corn hybrids. The planting date was on 1 May and harvested at 24 August. Stem diameter, stem hardness and number of ear were higher in P32P75 than other varieties. Ear height, dead leaf and green degree were highest in $NC^+$7117, but number of root system and Brix ($B^{\circ}$) were higher in P3394 than other varieties. Crude protein and crude fat (EE) were highest in P32K61 and P31P41, respectively (P<0.01). NDF and ADF were highest in KPO and KIO, respectively, but no significant differences were found among the varieties. Total mineral contents were the highest in Kwangpyongok (9,775 mg/kg), and P3394 (6,651 mg/kg) was the lowest as compared to other varieties (P<0.01). Crude protein yield, crude fat yield and mineral yield were highest in P3156, P31P41 and KPO, respectively (P<0.01). Total composition amino acid and total fatty acid were the highest in P32K61 and KIO, respectively (P<0.01). Yields of crude protein, fatty acid, composition amino acid and TDN were the highest in P3156 (P<0.01). But yields of crude protein and mineral were the highest in P31P41 and KPO, respectively (P<0.01). Total digestible nutrient (TDN) was higher in order of P3156 > $NC^+$7117 > P31N27 > KPO > P32K61 > P32T83 > P32P75 > P31P41 > P3394 > P32W86 > KIO. Based on the above results, corn hybrid varieties could be recommended in P3156, NC+7117 and P31N27 for growth characteristics, quantitative production and nutrition yield.

A Fundamental Study on the Types of Ship and the Steerage of Purse Seiners (巾着網漁船의 船型과 操船의 基礎的 硏究)

  • 김진건
    • Journal of the Korean Society of Fisheries and Ocean Technology
    • /
    • v.30 no.1
    • /
    • pp.13-24
    • /
    • 1994
  • Purse seiner detects a fish school navigating in full speed with the aid of fish finder, sonar, helicopter, etc., and casts a net quickly to enclose the fish school in purse seine net according to the movement of the fish school, wind, and current. At this moment, if the time of casting a net, direction, speed, and turning circle are net suitable, it is unavoidable to lose fish school founded with hard efforts and we only consume our efforts of casting and hauling the net. Therefore, in order to enclose the fish school to enhance the amount of fish for each casting, the author investigated the type of ships equipped with purse seiners and examined maneuvering tests so that we provide some basic information to figure out the ability of steerage correctly. The results obtained are summarized as follows: 1. Block coefficients of pelagic tuna purse seiners with gross tonnage between 500 and 1500 tons are recorded between 0.50 and 0.55 which are greater than those of off shore purse seiners recorded as between 0.44 and 0.54 and less than those of various cargo ships recorded as between 0.56 and 0.84. 2. L/B, L/D, B/D, B/T, and T/D of the class of gross tonnage between 75 and 130 tons are respectively 4.49, 11.00, 2.45, 2.85 and 0.86 as their average and those of the class of between 500 and 1500 tons are 4.89, 10.53, 2.15, 2.73 and 0.75 respectively, which are quite different from those of various cargo ships recorded as 6.0~7.5, 11.0~12.0, 1.6~2.0, 2.2~2.8 and 0.65~0.75 respectively. 3. Rudder area ratio of purse seiners of the class of between 75 and 130 tons is 1/24~1/31 and that of the clase of between 500 and 1500 tons is 1/36~1/42 which is greater than that of various cargo ships recorded as 1.45~1.75. 4. On speed-length ratio of purse seiners. 111 Dong-a has the biggest value 2.94 the class of 130 tons has 2.52 the class of between 75 and 100 tons has 2.30~2.35 and the class of between 500 and 1500 tons has 1.99~2.05. 5. Turning circle of stern trawlers Pusan 404 and Haelim 3 are measured as below according to rudder angles 5$^{\circ}$, 15$^{\circ}$, 25$^{\circ}$ and 35$^{\circ}$ respectively. Advances are 11.3~13.6, 6.0~7.1, 3.6~4.8 and 2.5~3.5 times of LPP respectively. Tactial diameters are 15.2~18.6, 6.9~8.0, 4.2~4.9 and 2.9~3.5 times of LPP. Purse seiner 111 Dong-a with rudder angle 35$^{\circ}$ has a good yaw with quick responsibility since its advance is 2.2~2.3 times of LPP and since its tactial diameter is 2.0~2.1 times of LPP. 6. In full ahead going of purse seiner 111 Dong-a, it takes about 2 minutes and 10.6 times of LPP from the reverse turning its engine into full astern to the ship speed 0. In its full astern going, it takes about 1 minute and 5.1 times of LPP from the reverse turning its engine into full ahead to the ship speed 0. In its full ahead going, it takes about 2 minutes and 50 seconds and 12.3 times of LPP from stopping its engine to the dead slow ahead speed 3.2 knots.

  • PDF

Effects of Seeding Dates on the Growth Characteristics, Dry Matter Yield and Feed Value of Teosinte New Variety, "Geukdong 6" [Zea mays L. subsp. mexicana (Schrad.) H. H. Iltis] (파종시기가 테오신트 [Zea mays L. subsp. mexicana (Schrad.) H. H. Iltis] 신품종 "극동 6호"의 생육 특성, 수량 및 사료가치에 미치는 영향)

  • Kim, Gyeong Suk;Lee, Sang Moo
    • Journal of The Korean Society of Grassland and Forage Science
    • /
    • v.39 no.1
    • /
    • pp.9-16
    • /
    • 2019
  • This study was carried out to investigate the effects of seeding dates and cultivated period on the growth characteristics, dry matter yield and feed value of Teosinte new variety "Geukdong 6"[Zea mays L. subsp. mexicana (Schrad.) H. H. Iltis]for feed. The experimental design was arranged in a randomized block design with three replications. Treatments consisted of five time seeding dates, 10 May(T1), 25 May(T2), 10 June(T3), 25 June(T4) and 10 July(T5), and same time harvesting, 22 October. Therefore, growing period were 164 days(T1), 149 days(T2), 134 days(T3), 119 days(T4) and 103 days(T5), respectively. In growth stage at harvest time, T1, T2, T3, T4 and T5 were early flowering, end heading, middle heading, early heading and early heading stage, respectively. Plant length and dead leaf were highest in T1, but leaf width and number of leaf were highest in T2 than others (p<0.05). Leaf length, stem diameter and number of tiller were not significantly different among the treatments (p<0.05). Stem hardness was higher in order of T1(2.0)> T2(1.9) > T3=T4(1.7) > T5($1.2kg/cm^2$). Fresh yield and dry matter yield showed significantly higher as the sowing time was faster and the cultivation period was longer (T1 > T2 > T3 > T4 > T5, p<0.05). Crude protein, crude fat and TDN content were highest in T5, but ADF and NDF content were highest in T1 than others (p<0.05). T1, T2 and T3 showed significantly higher crude protein yield compared to T4 and T5 (p<0.05). Total digestible nutrients yield were higher in order of T1 > T2 > T3 > T4 > T5 (p<0.05), and relative feed value were higher in order of T5 > T4 > T3 > T2 > T1 (p<0.05). Based on the above results, seeding dates could be recommended from the early May to the late May, and it is efficient that the cultivation period is over 150 days for dry matter yield, crude protein yield and total digestible nutrients yield.