• Geomechanics and Engineering
• /
• v.18 no.5
• /
• pp.535-543
• /
• 2019

Building on/with expansive soils with no treatment brings complications. Compacted expansive soils specifically fall short in satisfying the minimum requirements for transport embankment infrastructures, requiring the adoption of hauled virgin mineral aggregates or a sustainable alternative. Use of hauled aggregates comes at a high carbon and economical cost. On average, every 9m high embankment built with quarried/hauled soils cost $12600MJ.m^{-2}$ Embodied Energy (EE). A prospect of using mixed cutting-arising expansive soils with industrial/domestic wastes can reduce the carbon cost and ease the pressure on landfills. The widespread use of recycled materials has been extensively limited due to concerns over their long-term performance, generally low shear strength and stiffness. In this contribution, hydromechanical properties of a waste tyre sand-sized rubber (a mixture of polybutadiene, polyisoprene, elastomers, and styrene-butadiene) and expansive silt is studied, allowing the short- and long-term behaviour of optimum compacted composites to be better established. The inclusion of tyre shred substantially decreased the swelling potential/pressure and modestly lowered the compression index. Silt-Tyre powder replacement lowered the bulk density, allowing construction of lighter reinforced earth structures. The shear strength and stiffness decreased on addition of tyre powder, yet the contribution of matric suction to the shear strength remained constant for tyre shred contents up to 20%. Reinforced soils adopted a ductile post-peak plastic behaviour with enhanced failure strain, offering the opportunity to build more flexible subgrades as recommended for expansive soils. Residual water content and tyre shred content are directly correlated; tyre-reinforced silt showed a greater capacity of water storage (than natural silts) and hence a sustainable solution to waterlogging and surficial flooding particularly in urban settings. Crushed fine tyre shred mixed with expansive silts/sands at 15 to 20 wt% appear to offer the maximum reduction in swelling-shrinking properties at minimum cracking, strength loss and enhanced compressibility expenses.

• Journal of English Language & Literature
• /
• v.55 no.2
• /
• pp.359-382
• /
• 2009

Eliot's The Waste Land represents the last century in many respects. While working on the poem in cooperation with Pound, Eliot intended to make "Gerontion" a prelude in The Waste Land. But, as we read in his letter to Eliot, Pound advised him against it. As a result, Eliot had excluded it from The Waste Land. "Gerontion" was published separately, as an independent poem. Between "Gerontion" and The Waste Land, we find that the theme and the techniques are very much alike. However, for this very reason Eliot and Pound must have had thought differently. Eliot must have thought that "Gerontion" would serve well as a preface to the long poem, The Waste Land. It will provide a good introduction to the long poem, he may have thought. In the meantime, Pound must have thought that such similarities in theme and techniques would weaken both works, which would be redundant. To Pound, it would be too much to have the summary of everything that is to be repeated in The Waste Land. Eliot intuitively followed Pound's judgment. Both "Gerontion" and The Waste Land have similarities in theme and techniques. The theme of both works is "aimlessness, spiritual sterility, barrenness" in modern man living in the waste land. For example, in "Gerontion," there appear an old man Gerontion, Mr. Silvero, Hakagawa, Madame de Tornquist, Fraulein von Kulp, who are representative of spiritual barrenness of modern world; in the same context, in The Waste Land those who are most representative of modern world are the Typist, clerk, Thames's daughters, Madamn Sosostris, Tiresias, Phelabas. And in terms of techniques, "Gerontion" and The Waste Land both use dramatic monologues, allusions, and the techniques of modern art, such as montage and mosaic. Here in these works Eliot in fact practises his theory of the "Objective Correlative" that he has invented.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.21 no.2
• /
• pp.139-153
• /
• 2021

Background: In anesthetic techniques, touching bones can cause needle bending. Theoretically, a needle should support such deflection without fracturing. However, it is possible that a needle may fracture depending on the quality and type of needle used. This study evaluated the physical, chemical, and micromorphological characteristics of long and short dental anesthetic needles, as well as the mechanical properties of flexural load and bending resistance when needles are subjected to different bending angles. Methods: Long and short needles (30G, Jets, Misawa, Selekto, Terumo, Unoject and 27G, Dencojet, Injex, Jets, Misawa, Procare, Setoject XL, Terumo) were evaluated. Scanning electron microscopy was used to evaluate the needle bevels and energy-dispersive X-ray spectroscopy was used for the chemical analysis of needle compositions. Flexural loading and bending strength assessments were performed using a universal testing machine by bending the needles (n = 5) to angles of 30°, 60°, or 90°, or until fracture occurred. Results: The Injex 27G, Jets 27G, and Septoject XL 27G needles were all less than 30 mm in length. There were small percentage variations in the chemical compositions of the needles. Superior smoothness was observed for the Unoject 30G needle, which exhibited the highest fracture resistance at 60°. The Jets 30G needle exhibited greater resistance to fractures at 90°. The Procare 27G needle exhibited the highest load resistance to bending, followed by the Septoject XL 27G needle, and both needles were tied for the lowest fracture resistance. No needle fractured when bent to 30° or at less than three bends to 60° or 90°. Conclusions: Greater needle resistance to bending increases the probability of early fracturing. Thinner and shorter needles are more resistant than longer and thicker needles. Performing a single bend does not result in any significant risk of fracture or obliterate the lumen, allowing for the continued passage of anesthetic liquid.

• Asia-Pacific Journal of Business
• /
• v.13 no.4
• /
• pp.45-59
• /
• 2022

Purpose - This study investigates the performance of investment strategies incorporating estimated stock market cycle based on a lead-lag relationship between business cycle and stock market cycle, thereby deriving empirical implications on risk management. Design/methodology/approach - The data period ranges from June 1953 to September 2022 and de-trended short rate, term spread, credit spread, stock market volatility are considered as major input variables to estimate business cycle and stock market cycle by applying probit model. Based on the estimated stock market cycle, two types of strategies are constructed and their performance relative to the benchmark is empirically examined. Findings Two types of strategies based on stock market cycle are considered: The first strategy is to long(short) on stocks when stock market stage is expected to be an expansion(a recession), and the second one is to long on stocks(bonds) when expecting an expansion(a recession). The empirical results show that the strategies based on stock market cycle outperforms a simple buy and hold strategy in both in-sample and out-of-sample investigation. Also the out-of-sample evidence suggests that the second strategy which is in line with asset allocation is more profitable than the first one. Research implications or Originality The strategies considered in this study are based on the estimated stock market cycle which only depends on a few easily available financial variables, thereby making easier to establish such a strategy. It implies that investors enhance investment performance by constructing a relatively simple trading strategies if they set their position on stocks or choose which asset class to buy conditioning on stock market cycle.

• Journal of Preventive Medicine and Public Health
• /
• v.56 no.5
• /
• pp.458-466
• /
• 2023

Objectives: The association between long sleep duration and mortality is frequently attributed to the confounding influence of comorbidities. Nevertheless, past efforts to account for comorbidities have yielded inconsistent outcomes. The objective of this study was to evaluate this relationship using a large prospective cohort in Korea. Methods: The study included 114 205 participants from the Health Examinees Study, who were followed for a median of 9.1 years. A composite comorbidity score was developed to summarize the effects of 21 diseases. Using Cox proportional hazards regression, hazard ratios (HRs) and 95% confidence intervals (CIs) for all-cause, cancer, and cardiovascular mortality associated with sleep duration were estimated. These estimates were adjusted for socio-demographic factors, lifestyle factors, body mass index, and comorbidity score. Additionally, a stratified analysis by subgroups with and without comorbidities was conducted. Results: Throughout the follow-up period, 2675 deaths were recorded. After all adjustments, an association was observed between a sleep duration of 8 hours or more and all-cause mortality (HR, 1.10; 95% CI, 1.01 to 1.20). However, no such association was detected in the stratified analysis for the subgroups based on comorbidity status. Conclusions: Long sleep duration was found to be associated with all-cause mortality among Koreans, even after adjusting for comorbidities. Additional studies are required to explore the mechanism underlying the association between sleep duration and major causes of mortality.

• Journal of Electrochemical Science and Technology
• /
• v.15 no.3
• /
• pp.405-413
• /
• 2024

Several techniques for determining the reverse peak current from a cyclic voltammogram (CV) for a reversible system are described in the literature: CV itself as a baseline with long switching potential (E_λ) that serves as a baseline for other CVs, Nicholson equation that uses CV parameters to calculation reverse peak current and linear extrapolation of the current obtained at the switching potential. All methods either present experimental difficulties or large errors in the peak current determination. The paper demonstrates, both theoretically and experimentally, that trapezoidal cyclic voltammetry (TCV) can be used as a baseline to determine anodic peak current (i_ap) with high accuracy and with a switching potential shorter than that used by CV, as long as E_λ is at least 130 mV away from the cathodic peak. Beyond this value of switching potential the electroactive specie is completely depleted from the electrode surface. Using TCV with E_λ = 0.34 V and a switching time (t_λ) of 240 s as a baseline, the determination of the reverse peak current presents a deviation from the expected value of less than 1% for most of the CVs studied (except cases when E_λ is close to the direct potential peak). This result presents better accuracy than the Nicholson equation and the linear extrapolation of the current measured at the switching potential, in addition to presenting a smaller error than that obtained in the acquisition of the experimental current. Furthermore, determining the reverse peak current by extrapolating the linear fit of i_ap vs. ${\sqrt[1/]{t_{\lambda}}}$ to infinite time gave a reasonable approximation to the expected value. Experiments with aqueous potassium hexacyanoferrate (II) and ferrocene in acetonitrile confirmed the theoretical predictions.

• Journal of Chest Surgery
• /
• v.29 no.9
• /
• pp.1028-1030
• /
• 1996

Arteriovenous fistula Is the most widely used mean of vascular access for long-term hemodialysis in patients with end-stage renal disease. Lymphangioma associated with arteriovenous fistula is very rare, seemed to be developed from Iymphatic fluid accumulation. Lymphangioma is benign neoplasm, arises de hobo or secondary to surge y or irradiation, and affects almost any part of the body served by the Lwphasic system. Treatment of choise for Iymphangioma Is surgical excision. We repo$\ulcorner$t a case of procedure using Gore-Tex graft between left brachial artery and cephalic vein for vascular access of hemodialysis in 59 year old female, with successful surgical removal.

• The Korean Journal of Food And Nutrition
• /
• v.24 no.4
• /
• pp.501-508
• /
• 2011

Previous studies suggest that polyunsaturated fatty acids with long carbon chains such as eicosapentaenoic acid(EPA) and docosahexaenoic acid(DHA) have several health benefits. However metabolic consequences of these fatty acids themselves and their regulation of transcriptional activity involving glucose utilization are not well established. Thus, the purpose of this study was to investigate how EPA influx affects cellular lipid accumulation and gene expressions involving $de$ $novo$ lipogenesis in hepatocyte cultures. Compared to oleic acid treatment, EPA treatment showed remarkably decreased cellular TG conversion and accumulation, along with phospholipids at a lower extent. As expected, EPA increased mRNA expression involving fatty acid influx and lipid droplet formation, but did not affect mRNA expression involving glucose utilization. EPA increased transcriptional activity of PPAR-${\alpha}$ and glucose responsive transcription factor when transcription factor binding protein was activated. Taken together, these data suggest that EPA decreases lipid accumulation through increases of the ${\beta}$-oxidation pathway without interruption of glucose utilization.

• Animal Systematics, Evolution and Diversity
• /
• v.27 no.3
• /
• pp.262-267
• /
• 2011

Three species of the family Processidae, Hayashidonus japonicus (De Haan, 1844), Processa sulcata Hayashi, 1975 and Processa zostericola Hayashi, 1975 described with illustrations from Korea. Two of these species, H. japonicus and P. zostericola, represent new records for the Korean carcinological fauna. The genus Hayashidonus included the single species, H. japonicus is distinguished from other genera of Processidae by the broadly triangular rostrum, the obscure or absent dorsolateral spines of the telson, and the exceptionally long molar process of the mandible. Two species of the genus Processa, P. zostericola and P. sulcata are distinguishable each other by presence or absence of an obtuse process of the basicerite of antenna on the anteroventral margin. The basicerite of antenna arms with the obtuse process in P. zostericola, while in P. sulcata the basicerite of antenna lacks the process but is smooth on the ventral margin. A key to these species is presented.

• Structural Engineering and Mechanics
• /
• v.49 no.2
• /
• pp.261-271
• /
• 2014

This paper reported an experimental study on creep behaviors of PVB and Ionoplast laminated glass (LG) under load duration of 30 days. The tests were carried out in room temperature ($23^{\circ}C$). The study revealed that after sustaining loads for 30 days, the mid-span deflection of PVB LG increased by almost 102% compared with its short term deflection, while that of Ionoplast LG approximately increased by 14%; composite effects between two glass plies in PVB LG gradually reduced with time, but did not fully vanish at the 30th day; two glass plies in Ionoplast LG on the other hand was able to withstand loads as an effective composite section during the entire loading period; the creep behaviors of both LG were not finished yet at the 30th day. In addition to this, also studied was the varying of the bending stresses of PVB and Ionoplast LG under load duration of 2 hours. The tests were carried out in ambient temperatures of $30^{\circ}C$, $50^{\circ}C$ and $80^{\circ}C$ respectively. It was found that under a given load, although the bending stresses of both LG increased with increasing temperature, for PVB LG the increasing rate of the bending stress decreased with increasing temperature, while for Ionoplast LG the increasing rate of the bending stress increased with increasing temperature.