• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.12
• /
• pp.6043-6062
• /
• 2019

Low-rank matrix decomposition has shown its capability in many applications such as image in-painting, de-noising, background reconstruction and defect detection etc. In this paper, we consider the texture background of rail track images and the sparse foreground of the defects to construct a low-rank matrix decomposition model with block sparsity for defect inspection of rail tracks, which jointly minimizes the nuclear norm and the 2-1 norm. Similar to ADM, an alternative method is proposed in this study to solve the optimization problem. After image decomposition, the defect areas in the resulting low-rank image will form dark stripes that horizontally cross the entire image, indicating the preciselocations of the defects. Finally, a two-stage defect extraction method is proposed to locate the defect areas. The experimental results of the two datasets show that our algorithm achieved better performance compared with other methods.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.23 no.2
• /
• pp.178-183
• /
• 2013

In this study, we proposed a method for electroencephalogram (EEG) classification using invariant CSP at special channels for improving the accuracy of classification. Based on the naive EEG signals from left and right hand movement experiment, the noises of contaminated data set should be eliminate and the proposed method can deal with the de-noising of data set. The considering data set are collected from the special channels for right and left hand movements around the motor cortex area. The proposed method is based on the fit of the adjusted parameter to decline the affect of invariant parts in raw signals and can increase the classification accuracy. We have run the simulation for hundreds time for each parameter and get averaged value to get the last result for comparison. The experimental results show the accuracy is improved more than the original method, the highest result reach to 89.74%.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.765-767
• /
• 2013

Modern societies need image processing technology as mobile phones, computers and multimedia etc. are supplied, and image signal processing is now applied in many fields. However, images are damaged by impulse noise from various sources; to restore the damaged images from impulse noise standard median filter has been used as a typical method, but it makes errors at edge area lowering image quality. Therefore, in this paper average filter algorithm, in which mask is processed with multiple partition to remove impulse noise, is proposed. Simulation showed that the proposed method is superior in noise removal property to the existing ones.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.779-781
• /
• 2013

As the demand for various multimedia service increases the technology that utilizes image as information transfer method develops rapidly. Though average filter, median filter and weight filter etc. have been proposed to remove various noises that are added to images, the existing methods are short of noise removal and edge reservation performance. Therefore, in this paper an algorithm, in which noise is decided at the first hand, and then it is processed through modified median filter and adaptive weighted average filter, is proposed to effectively remove the complex noise that has been added to an image. And it was compared with existing methods through simulation and PSNR(peak signal to noise ratio) has been used as a criterion.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.7
• /
• pp.1734-1739
• /
• 2014

Currently, with the rapid development of the digital age, multimedia-related image devices become popular. However, images are susceptible to corruption in processing image data due to the impulse noise and active researches have been conducted to restore these images. This paper, in order to restore the damaged images in impulse noise environments, suggested an image restoration algorithm which applies weights depending on spatial distance between directionality and pixel by focusing on damaged pixels. Additionally, this algorithm was compared with existing methods by using the PSNR (peak signal to noise ratio) as the objective standard to judge whether there were improved effects.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.1
• /
• pp.60-69
• /
• 2014

Footstep detection using seismic sensors for security is a very meaningful task, but readings can easily fluctuate due to noise in outdoor environment. We propose NSSC method based on nonlinear spectral subtraction and cross-correlation using prime footstep model signal as a footstep signal refining process that enhances the signal-to-noise ratio (SNR) and attenuates noise. After de-noising, a detection event classification method is presented as further refining process to ensure that the detection result is a footstep. To validate the proposed algorithm, representative experiments including sunny and rainy-day cases are demonstrated.

• Smart Structures and Systems
• /
• v.1 no.2
• /
• pp.185-215
• /
• 2005

Advanced signal processing techniques have been long introduced and widely used in structural health monitoring (SHM) and nondestructive evaluation (NDE). In our research, we applied several signal processing approaches for our embedded ultrasonic structural radar (EUSR) system to obtain improved damage detection results. The EUSR algorithm was developed to detect defects within a large area of a thin-plate specimen using a piezoelectric wafer active sensor (PWAS) array. In the EUSR, the discrete wavelet transform (DWT) was first applied for signal de-noising. Secondly, after constructing the EUSR data, the short-time Fourier transform (STFT) and continuous wavelet transform (CWT) were used for the time-frequency analysis. Then the results were compared thereafter. We eventually chose continuous wavelet transform to filter out from the original signal the component with the excitation signal's frequency. Third, cross correlation method and Hilbert transform were applied to A-scan signals to extract the time of flight (TOF) of the wave packets from the crack. Finally, the Hilbert transform was again applied to the EUSR data to extract the envelopes for final inspection result visualization. The EUSR system was implemented in LabVIEW. Several laboratory experiments have been conducted and have verified that, with the advanced signal processing approaches, the EUSR has enhanced damage detection ability.

• Geomechanics and Engineering
• /
• v.21 no.1
• /
• pp.35-51
• /
• 2020

In this study, the seismic response analysis of embankment dams was investigated through numerical modeling. The seismic behavior of dams under main earthquake records and wavelet-based records were studied. Earthquake records were decomposed using de-noising method (DNM) and down-sampling method (DSM) up to five levels. In decomposition process, low and high frequencies of the main earthquake record were separated into two signals. Acceleration response, spectral acceleration, and Fourier amplitude spectrum at the crest of embankment dams under different decomposition levels were evaluated. The seismic behavior under main and decomposed earthquake records was compared. The results indicate an acceptable agreement between the seismic responses of embankment dams under wavelet-based decomposed records and main earthquake motions. Dynamic analyses show that the DNM-based decomposed earthquake records have a better performance compared to DSM-based records. DNM-based records up to level 4 and DSM-based records up to level 2 have a high accuracy in assessment of seismic behavior of embankment dams. The periods corresponding to the maximum values of acceleration spectra and the frequencies corresponding to the maximum values of Fourier amplitude spectra of embankment dam crest under main and decomposed records are in good agreement. The results demonstrate that the main earthquake records can be replaced by wavelet-based decomposed records in seismic analysis of embankment dams.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.9
• /
• pp.2265-2271
• /
• 2014

In modern society digital equipments that are related with various hardware and software are popularized, and digital images are widely applied in the field of production and scientific research. In general, however, images are degraded by the noise in the process of transmission and storage. In this paper, to reduce the influence of mixed noises, the algorithm in which noises in the space area are classified into impulse noise and Gaussian noise and this is processed by applying weighted value, while that is processed by modified nonlinear filter is proposed. And the excellence of the proposed algorithm is judged by PSNR(peak signal to noise ratio).

• Journal of Information Processing Systems
• /
• v.13 no.5
• /
• pp.1135-1148
• /
• 2017

Speech recognition is one of the fascinating fields in the area of Computer science. Accuracy of speech recognition system may reduce due to the presence of noise present in speech signal. Therefore noise removal is an essential step in Automatic Speech Recognition (ASR) system and this paper proposes a new technique called combined thresholding for noise removal. Feature extraction is process of converting acoustic signal into most valuable set of parameters. This paper also concentrates on improving Mel Frequency Cepstral Coefficients (MFCC) features by introducing Discrete Wavelet Packet Transform (DWPT) in the place of Discrete Fourier Transformation (DFT) block to provide an efficient signal analysis. The feature vector is varied in size, for choosing the correct length of feature vector Self Organizing Map (SOM) is used. As a single classifier does not provide enough accuracy, so this research proposes an Ensemble Support Vector Machine (ESVM) classifier where the fixed length feature vector from SOM is given as input, termed as ESVM_SOM. The experimental results showed that the proposed methods provide better results than the existing methods.