• Horticultural Science & Technology
• /
• v.18 no.3
• /
• pp.395-398
• /
• 2000

This study was conducted to evaluate the effect of harvest time, temperature and ethephon on the softening of astringent persimmon 'Cheongdobansi'. The persimmon was harvested on Sep. 21 (early season harvesting) and Oct. 11 (optimum season harvesting). Quality changes were evaluated at 10, 15 and $20^{\circ}C$ after ethephon treatment. Seventy percent of hardness decrease occurred during the first 2 days of treatment at 15 and $20^{\circ}C$, and hardness was slowly decreased after 6 days. The treatment of $10^{\circ}C$ was not effective on inducing fruit softening. Soluble tannin content was sharply decreased 6 days after ethephon treatment at 15 and $20^{\circ}C$ regardless the harvest time, whereas this was much slower in control. Hunter 'L' and 'b' values were increased until 2 days, and then decreased with the early harvested persimmon. The Hunter values were decreased until the 8th day of storage in fruit harvested at optimum season.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.65 no.4
• /
• pp.353-364
• /
• 2020

Recently in Korea, soybean harvesting has been delayed due to rainfall during the harvesting season, resulting in a reduction in yield and seed quality. This study was conducted to analyze the changes in yield and seed quality during delayed harvest with rainfall treatment using different harvesting methods, including field harvesting and polyethylene film covering after cutting fully-matured soybean plants (PE covering after cutting), with two major Korean soybean cultivars (Glycine max L), Pungsannamulkong and Daewonkong. The shattering rate of Pungsannamulkong, which is higher than that of Daewonkong, increased up to 41.8% when the harvest was delayed for 40 days without rainfall treatment by harvesting with PE covering after cutting. The weight of 100 seeds tended to decrease slightly as harvesting was delayed. When Daewonkong was harvested using the PE covering after cutting method with rainfall treatment, the yield decreased to the lowest level with a 0.8 kg ha^-1 daily reduction rate. Pungsannamulkong showed the lowest yield when harvested using PE covering after cutting without rainfall treatment with a 3.4 kg ha^-1 daily reduction rate. The infected seed rate increased according to the harvest delay in both cultivars, and significant differences were observed according to rainfall treatment and harvesting method. The germination rate was maintained above 95% even after 40 days of delayed harvest if there was no rainfall treatment. However, with rainfall treatment, the germination rate was significantly lowered as harvesting time was delayed. In the field harvesting with rainfall treatment, the germination rate decreased to 77.2% for Daewonkong and 76.5% for Pungsannamulkong after 40 days of harvest delay. For the 100-seed weight, effects of individual treatments and interactions between treatments were not observed. In contrast, the effect of interactions between treatments on the shattering rate was significant in both cultivars, indicating that the shattering rate had the greatest impact on the yield changes during delayed harvest.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.60 no.4
• /
• pp.442-447
• /
• 2015

This research analyzed the characteristics of varieties of rice such as a harvest time and yield, and to select a proper variety to product green rice according to a conventional planting culture and a late planting culture. The most proper harvest time of rice, in general, was 15 to 25 days after heading to product the green rice. Sinsunchal among glutinous rice varieties and Chilbo among nonglutinous rice varieties showed the most amount harvest at 25 days after heading, which was a limit harvest time for the whole green rice production in overall rice varieties. The amount of green rice according to transplanting times, the May $30^{th}$ transplanting was more than the June $20^{th}$. The yield of green rice harvested at 15~25 days after heading was varied according to varieties. Proper glutinous varieties for green rice production were Dongjinchal, Sangdongchal, Boseokchal, and Sinsunchal, in order of listed, which were transplanted at the May $30^{th}$. Meanwhile, Boseokchal, Backokchal, and Sinsunchal, in order of listed, were proper varieties for green rice production, which were transplanted at the June $20^{th}$. In nonglutinous rice, Samkwang, Nunbora, and Chilbo, which were transplanted at the May $30^{th}$, were proper varieties for green rice production. Hwanggeomnodeul, Hopum, and Chilbo, which were transplanted at the June $20^{th}$, were proper varieties for green rice production.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.62 no.4
• /
• pp.311-316
• /
• 2017

The relationship between mean air temperature after heading and starch characteristics of colored rice grains was investigated using three colored rice cultivars. Pasting temperature within each rice cultivar with different harvest times differed. The pasting temperatures of two rice cultivars, Hongjinju and Joseongheugchal, reached the highest at 40 days after heading and decreased during the late harvest time. Distribution of amylopectin in the Hongjinju rice cultivar at the earlier harvest time contained a greater number of very short chains with the degree of polymerization (DP) between 6 and 12 and fewer chains with a DP from 13 to 24 than that of the later harvest time. However, there was little difference in the distribution of the longer chains of $25{\leq}DP{\geq}36$ and $37{\leq}DP$ for latter harvest times compared to that of the earlier ones. It was suggested that the structure of amylopectin affected the varietal differences in patterns of chain length of amylopectin during grain filling. In addition, the control of ripening was different from that causing the pigment effects in the fine structure of amylopectin in the three colored rice cultivars. Larger starch granules were observed in the Joseongheugchal rice cultivar and smaller granules occurred in the Hongjinju rice cultivar. The present study revealed that later harvest times led to a clear increase in the mean granule size of starch in the three colored rice cultivars.

• Korean Journal of Environmental Agriculture
• /
• v.31 no.1
• /
• pp.45-51
• /
• 2012

BACKGROUND: This study was carried out to establish pre-harvest residue limit of fungicides pyrimethanil and trifloxystrobin in persimmon, based on dissipation and biological half-lives of two fungicides residue. METHODS AND RESULTS: Both pyrimethanil and trifloxystrobin were extracted with acetonitrile, clean-up with $NH_2$ SPE cartridge and residue were analyzed by HPLC/DAD. Limit of Detection was 0.01 mg/kg. Average recovery were $81{\pm}1.62%$, $98{\pm}1.58%$ of pyrimethanil, and $91{\pm}2.94%$, $98{\pm}1.25%$ of trifloxystrobin at fortification levels at 0.1 and 0.5 mg/kg, respectively. CONCLUSION: The biological half-lives of pyrimethanil were 15.6 and 11.6 days at sprayed with recommended and double dosage, respectively. The biological half-lives of trifloxystrobin were 10.4 and 10.3 days at sprayed with recommended and double dosage, respectively. The pre-harvest residue limit of pyrimethanil and trifloxystrobin were recommended as 2.69 and 0.83 mg/kg for 10 days before harvest, respectively.

• Korean Journal of Environmental Agriculture
• /
• v.37 no.1
• /
• pp.41-48
• /
• 2018

BACKGROUND: This study was performed to calculate the biological half-lives and regression coefficient of bistrifluron and cyenopyrafen dissipation in peach and to estimate the Pre-Harvest Residue Limits (PHRLs). METHODS AND RESULTS: The bistrifluron and cyenopyrafen were prepared on the basis of good agricultural practice for peach and treated with a single application. Peaches were harvested at 0, 1, 3, 5, 7, 10 and 14 days after application, prepared for analysis, and analyzed by HPLC-DAD. The limits of quantitation (LOQ) of bistifluron and cyenopyrafen were 0.02 mg/kg and 0.04 mg/kg, respectively. The recoveries of bistrifluron and cyenopyrafen were 99.5~108.7% and 88.4~98.9% at two different concentration levels. The biological half-lives of field I (Sejong) and field II (Pyeongtaek) were 6.1 and 7.0 days for bistifluron, and 6.3 and 7.0 days for cyenopyrafen, respectively. The 95% confidence intervals of dissipation rate constants of bistrifluron in peach were 0.0805~0.1457 and 0.0577~0.1417 for field I and field II, respectively, and those of cyenopyrafen were 0.0911~0.1278 and 0.0576~0.1417, respectively. CONCLUSION: Residue dissipation of bistrifluron and cyenopyrafen in peach were similar to that of correction to sample weight difference during the harvest periods. This study suggests that residue dissipation rate would be helpful to set the PHRLs that protect public health.

• Research in Plant Disease
• /
• v.15 no.3
• /
• pp.230-235
• /
• 2009

Postharvest skin sooty dapple and decay disease of pear fruit often originates at small stain symptoms that occurred during harvest and handling. Experiments were conducted to characterize the effect of timing of application of disease control materials, and to evaluate sequential postharvest applications of fungicides or fungicides and bio-control agents. Fungicides and bio-control agents were increasingly less effective when the period between harvest and application was prolonged. Thiabendazole (TBZ) applied to fruit without artificial wounding or inoculation effectively reduced skin sooty and decay disease when applied within 3 weeks or 6 weeks in 2 years of study. TBZ, Fludioxonil and pyrimethanil were effective in controlling skin sooty and decay disease at artificial wounds inoculated with Cladosporium tenuissimum up to 14 days after inoculation. Application of TBZ at harvest followed 3 weeks later by application of Fludioxonil was superior to application of TBZ at harvest alone. Two bacterial biocontrol agents reduced skin sooty and decay disease at pear wounds inoculated with C. tenuissimum up to 14 days after inoculation with C. tenuissimum, but were ineffective when applied at 28 days after inoculation. Of possible sequential arrangements of fungicide and bio-control treatments, application of the most effective material promptly after harvest generally resulted in the highest level of disease control.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2005.04a
• /
• pp.168-169
• /
• 2005

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.15 no.4
• /
• pp.259-264
• /
• 1995

Several benefits provided by white clover (Tnifoliurn repens L.) can be elevated as relationship between its morphological and physiological characteristics is clarified. The experiment was done to analyze the relationship between them in the clover with different leaf size. Individual plants of Osceola (large leaf), Grasslands Huia (medium leaf) and Aberystwyth S184 (small leaf) were grown in 15m plastic pot containing a 1:2:1 soil:sand:Promix mixture for 55 days, and then clipped to remove all fully expanded leaves every 7, 14 or 28 days. To measure the cultivar response, plants were sampled for morphological and physiological parameters on the date (0) after final harvest and 1, 3, 7, 14 and 28 days after the final harvest and then their relationship was analyzed. Osceola had greater leaf area per trifoliolate but less no. of leaves per plant to result in similar total leaf area per plant of all cltivars. Stolon length and no. of growing tips per plant declined with smaller leaf size although the result in biomass was reverse. Stolon of all cultivars showed the greatest fluctuation in total nonstructud carbohydrate during the regrowing period but nitrogen concentrations of all their fractions and dinitrogen fixation did similar patterns. Stolon and root of Osceola, moreover, were the highest ones. Biomass, stolon length and total leaf area per plant of all cultivars were positively correlated to carbohydrate concentration of all frauions and dinitrogen fixation. In Osceola relationship between nitrogen concentration of stolon and the characters showed in Osceola was positively done.

• Journal of Applied Biological Chemistry
• /
• v.65 no.3
• /
• pp.173-181
• /
• 2022

This study was carried out to investigate the residual characteristics of flubendiamide in kale to establish pre-harvest residue limits (PHRL) and the removal efficiency according to the washing solvent and method. Field tests were conducted at two different greenhouses, field 1 (Anseong-si, Gyeonggi-do) and field 2 (Incheon-si, Gyeonggi-do). According to the safe use guidelines kale was sprayed with flubendiamide twice every 10 days and harvested 0 (after 2 h), 1, 2, 3, 5, 7 and 10 days after the final application. The biological half-live of flubendiamide in kale was calculated based on dissipation curves of the pesticide in samples analyzed by liquid chromatography coupled with tandem mass spectrometry. In the analysis, method limits of quantitation (MLOQ) were 0.01 mg/kg, and recoveries performed with two different fortification levels of 10 MLOQ and maximum residue limit (0.7 mg/kg) were 104.2±3.6 and 101.9±10.2%, respectively. The dissipation rate constant of flubendiamide in kales were 0.2437 at field 1 and 0.1981 at field 2. PHRL calculation equations obtained using the dissipation constants estimated as follows: if the residual concentration of flubendiamide in kale on 10 days before harvest is less than 8.0 mg/kg, the residual concentration on the harvest would be under MRL. The removal of flubendiamide from kale was the greatest when it was washed with vinegar (39.8%), followed by baking soda (31.7%), calcium powder (30.2%), neutral detergent (27.2%), and tap water (15.9%). The results of this study would be useful for both farmers and consumers to produce or consume safe agricultural products.