• Proceedings of the Korea Information Processing Society Conference
• /
• 2012.04a
• /
• pp.607-608
• /
• 2012

Data aggregation is a fundamental problem in wireless sensor networks which attracts great attention in recent years. Delay and energy efficiencies are two crucial issues of designing a data aggregation scheme. In this paper, we propose a distributed, energy efficient algorithm for collecting data from all sensor nodes with the minimum latency called Delay-aware Power-efficient Data Aggregation algorithm (DPDA). The DPDA algorithm minimizes the latency in data collection process by building a time efficient data aggregation network structure. It also saves sensor energy by decreasing node transmission distances. Energy is also well-balanced between sensors to achieve acceptable network lifetime. From intensive experiments, the DPDA scheme could significantly decrease the data collection latency and obtain reasonable network lifetime compared with other approaches.

• Proceedings of the Korea Contents Association Conference
• /
• 2016.05a
• /
• pp.21-22
• /
• 2016

본 논문에서는 대용량 과학데이터 아카이브 시스템 설계를 위해 기존 리포지터리 시스템을 분석한다. 대용량 과학데이터를 효율적으로 수집하고 저장하기 위한 아카이브 시스템 아키텍쳐 설계를 위하여 현재 서비스되고 있는 다양한 과학데이터 리포지터리 시스템을 분석한다. 분석한 내용을 바탕으로 대용량 과학데이터 아카이브 시스템 아키텍쳐를 설계하기 위한 기술적인 요구사항을 도출한다.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.11 no.1
• /
• pp.16-22
• /
• 2012

Wireless data communication is easy to be affected by channel noise and degrade reliability and stability by the multipath fading and ISI compared with wired data communication. In this paper, we designed and implemented indoor wireless modem adopted DQPSK modulation scheme for improvement of bandwidth efficiency, and convolutional encoding, Viterbi decoding and hybrid ARQ algorithm combinig FEC with CRC for efficient error control in indoor wireless channel. Testing the implemented wireless modem, we verified the proposed scheme is proper to efficient and reliable indoor wireless data communication.

• Journal of Industrial Technology
• /
• v.21 no.A
• /
• pp.97-103
• /
• 2001

This paper presents the development of the I/O Interface for the real time parallel data communication between controller of a six-axis industrial robot(CRS-A460) and an external computer. The proposed I/O Interface consists of the hardware I/O interface and the software that is downloaded to the robot controller and executed by the controller operating system. The constitution of the digital I/O Port for CRS-A460 robot controller and the digital I/O board for IBM-PC are presented as well as the Process Control Program of the robot controller. The developed protocol for the parallel data communication is described. The data communication is tested, and the performance is analysed. In particular, it is shown that the real-time constraint of the robot controller process is satisfied.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2015.04a
• /
• pp.212-213
• /
• 2015

Data aggregation is a fundamental problem in wireless sensor networks that has attracted great attention in recent years. On constructing a robust algorithm for minimizing data aggregation delay in wireless sensor networks, we consider limited transmission range sensors and approximate the minimum-delay data aggregation tree which can only be built in networks of unlimited transmission range sensors. The paper proposes an adaptive method that can be applied to maintain the network structure in case of a sensor node fails. The data aggregation tree built by the proposed scheme is therefore self-healing and robust. Intensive simulations are carried out and the results show that the scheme could adapt well to network topology changes compared with other approaches.

• International journal of advanced smart convergence
• /
• v.12 no.1
• /
• pp.9-17
• /
• 2023

Recently, IoT technology has been widely used in many industries. Also research on integrating IoT technology with IoT sensors is actively underway. One of the important challenges in IoT is to support low-latency communication. With the development of communication networks and protocols, a variety of protocols are being used, and their performance is improving. In this paper, we compare the performance and analyze the characteristics of some of the major communication protocols in IoT application, namely MQTT, HTTP, and HTTPS. IoT sensors acquired data by connecting an Arduino equipped with ESP8266 and a temperature and humidity sensor (DHT11). The server measured the performance by building servers for each protocol using AWS EC2. We analyzed the packets transmitted between the Arduino and the server during the data transmission. We measured the amount of data and transfer time. The measurement results showed that MQTT had the lowest data transmission time and data amount among the three protocols.

• Journal of Advanced Navigation Technology
• /
• v.26 no.1
• /
• pp.1-8
• /
• 2022

Telemetry system is a system that measures and transmits status information in the aircraft to the ground. The data received from the ground is information for monitoring the state of the aircraft, and can be checked and analyzed in real time through the test program. Data processing test system for telemetry currently in operation is built to transmit data using wired communication and perform test. As smart devices become popular due to the continuous development of information and communication technology, wireless communication networks are becoming important, and technologies for improving performance are steadily being developed. In this paper, we suggests and builds data processing ground test system for telemetry using wireless communication(Wi-Fi) that can be checked through smart devices such as tablets, in order to break away from the existing method and apply future-oriented technology. Finally, the suggested test system performance was proved by testing in various environments by linking test equipment and test program.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.2 no.2 s.3
• /
• pp.55-64
• /
• 2003

This research is about executing the suitability evaluation of the data through wireless communication system in comparison with the data through the wire system used in National Highway Traffic Management System. The communication system for the evaluation was established on Peoyngteak-Anjung section(about 19 Km) at Route 38 in southern National Highway of the National Capital region where image detectors with the communication by wire were set up. In the situation, the comparison of the data transmission rates between the wire system and the proposed system was accomplished. Before we evaluate the possibility of application about the proposed system, the elements of wireless systems performed the spot investigations. Traffic data transmission test among the equipments was accomplished on the section of the Route 38 where wireless communication equipments were set up. And then, the test of traffic data transmission between the field equipment and the data collective center of wireless communication system was carried out. It evaluated the reliability of wireless communication data for the suitability evaluation of cable/wireless data collected while 73 days.

• The Journal of the Korea Contents Association
• /
• v.5 no.1
• /
• pp.45-53
• /
• 2005

With the rapid progress of research to offer a convenience of mobile communication, the mobile users can use not only the services of voice call but also the variety services of data communication using Internet. These include Internet Searching, Internet Shopping and Internet banking and Internet stock exchange and electronic payment and so on, based on PKI. Also, the need of data communication between the mobile users has been increased. As it is possible for mobile users to do user authentication, key distribution, encryption, decryption and so on, it is needed the certificate status validation between the mobile users. However due to the PCS(Personal Communication System) had been only designed and implemented for voice call between the mobile users, it is not easy to apply data communication between the mobile users on PKI. Therefore the study of for the data communication between the mobile users in PCS is a few. It is for the data transfer between the mobile users to communicate using call processing of PCS. So, we propose how to process the certificate status validation during call processing for data communication between the mobile users in the PCS.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.13 no.2
• /
• pp.243-251
• /
• 2010

The military has been putting great efforts into applying data communication on existing voice communication systems being used in NCW(Network Centric Warfare). Data communication will be an effective choice in one of many effort to yield a minimum kill chain, comparing to legacy voice communications, when tactical units conduct their missions. However, the required budget will be enormous, in case of the replacement of a lot of legacy communication systems with new one. As a cost-effective alternative, the tactical data communication systems using the conventional radio systems instead of the development of new radio systems has been proposed. It is mandatory, though, to ensure QoS while maintaining data communication by making use of legacy radio systems already in use. This paper focuses on the performance issues experimented and analyzed for tactical data communication through the legacy radio systems as the first step towards guaranteed QoS. We have conducted various experiments such as the transmission error rate on certain tactical messages, performance evaluation of redundant transfers, the relationship between the transmission frame size and rate of error, the identification of error points in the transmission frame, and techniques to reduce the errors in both hopping and non-hopping modes. As a result of the performance experiments, The adaptive communication module which decides the redundant transmission or the Forward Error Correction(FEC) technique by analyzing channel status and current transmission status(hopping/non-hopping) of the legacy radio should be designed. the FEC technique in non-hopping, and the redundant transmission technique in hopping mode was recommended from the result of experiment with the frame size is 20bytes in non-hopping and 10Bytes frame size in hopping mode.